The feature is supported by all supported qemu versions thus covered
thoroughly by other test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is now pointless since we always assume that this option is
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will always add the property so the negative tests would
stop working.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU 6.0, this controller is enabled by default
on aarch64.
https://bugzilla.redhat.com/show_bug.cgi?id=1967187
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to pass the 'trim' requests through the copy-on-read filter so
if a user configures a discard policy on the disk the requests get
through to the appropriate format layer in the blockdev tree.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1986509
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Add support for customizable grabToggle key combinations with
<input type='evdev'>.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the common id 'lsec0' for all launchSecurity types in the QEMU
command line construction.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Turns out, when introducing HMAT support in v6.6.0-rc1~249
I've forgot to allow "cache" attribute for <bandwidth/> element
in RNG. It's parsed and formatted, but schema does not allow it.
Fixes: a89bbbac86
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980162
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If guest is configured to use memfd then the function that build
memory-backend-* part of command line will put
memory-backend-memfd, always. Even for NVDIMMs. This is not
correct, because NVDIMMs need a backing path (usually to a real
host NVDIMM device). Therefore, regardless of memfd being
requested, we have to stick with memory-backend-file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It is possible to define/edit(in shut off state) a domain XML with
same hostdev device repeated more than once, as shown below. This
behavior is not expected. So, this patch fixes it.
vser1:
<domain type='kvm'>
[...]
<devices>
[...]
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0005'/>
</hostdev>
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0006'/>
</hostdev>
[...]
</devices>
</domain>
$ virsh define vser1
Domain 'vser1' defined from vser1
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already reject TPM 1.2 in a number of scenarios; let's add
ARM virt guests to the list.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of providing the configuration explicitly, let libvirt
fill in the blanks. After the recent changes, this results in a
working configuration without the need for user input.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Use the more modern s390-ccw-virtio machine type and use
VIR_TEST_CAPS_ARCH_LATEST to invoke it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't use the 's390-virtio' machine which was removed in qemu 2.6 and
use real capabilities for the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Use the more modern s390-ccw-virtio machine type and use
VIR_TEST_CAPS_ARCH_LATEST to invoke it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the console, disk, and network test for the legacy s390 machine
which was removed in qemu 2.6. All of these have 'ccw' equivalents.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Modernize the test for sclp console since there isn't any other test for
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 's390-virtio' machine was removed from qemu in the 2.6 release.
Modernize the test for diag288 since there isn't any other test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 6.0.0 introduced `confidential-guest-support` -machine option as
a replacement for `memory-encryption`. In order to test it use 6.0.0
capabilities as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The pc-1.0 machine type was deprecated in QEMU 6.0.0. In our tests we
use 2.12.0 and 6.0.0 replies so switch to pc type.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Using slice to cut off the end of the image is a perfectly vaid
configuration. Use 'unsignedInt' instead of 'positiveInteger' for the
'offset' attribute in the XML schema and modify one test case to cover
this use case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce replies and xml files for QEMU 6.0.0 on s390x.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add test data based on qemu commit v6.0.0-540-g6005ee07c3.
Notable changes are the removal of 'sheepdog' disk storage protocol.
Additionally the cpu model reported when probing seems to have changed
from:
"model-id": "AMD Ryzen 9 3900X 12-Core Processor "
to:
"model-id": "QEMU TCG CPU version 2.5+"
despite building on the same machine. This probably also results in the
2 test changes in the CPU definition which popped up in this update.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU is dropping sheepdog support in 6.1 so we need to limit the test
case to the latest version supporting sheepdog as it won't be described
by the QMP schema any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Until we clean up and remove all capabilities which no longer make sense
to have separately, we should use virQEMUCapsInitQMPBasicArch to set the
defaults as it's used by qemuxml2argvtest when testing with fake
capabilities.
This allows us to prevent testing dead code paths with the fake
capability tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemu versions now have the capability so testing the
absence doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_VHOSTUSER_MULTIQUEUE is now always enabled, so the negative
case doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move it under AARCH 64, since it's a platform specific feature, thus it
will be removed from all other platforms.
Since virQEMUCapsInitQMPBasicArch is used in qemuxml2argv test to
initiate qemuCaps for tests with fake capabilities, all the tests gain
GIC support now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_MACH_VIRT_GIC_VERSION will be assumed for all aarch64 machines
starting from next commit, so this test will become invalid. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_MACHINE_PSERIES_RESIZE_HPT and
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT are now always asserted on PPC
machine types, move them to virQEMUCapsInitQMPBasicArch.
It's now always set for AARCH64, move it into the function setting basic
caps for the emulator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemu versions now have the flag so the test doesn't make
sense any more.
The flag setting will be moved to virQEMUCapsInitQMPBasicArch which will
make this test fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Drop all the cases pinned to unsupported versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This adds a new XML element
<filesystem>
<binary>
<sandbox mode='chroot|namespace'/>
</binary>
</filesystem>
This will be used by qemu virtiofs
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows users to restrict memory nodes without setting any specific
memory policy, then 'restrictive' mode is useful.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virCommandToString has the possibility to return an already wrapped
string with better format than what we get from the test wrapper script.
The main advantage is that arguments for an option are always on the
same line which makes it more easy to see what changed in a diff and
prevents re-wrapping of the line if a wrapping point moves over the
threshold.
Additionally the used output is the same we have in the VM log file when
a VM is starting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The files are no longer referenced by either qemuxml2argvtest or
qemuxml2xmltest. Remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The files were added in error (audio-*) for test cases which produce an
error, left over after converting to DO_TEST_CAPS_LATEST
(disk-detect-zeroes), or left over after splitting test cases
(disk-network-tlsx509).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This makes it possible to enable stable NIC device names in most modern
Linux distros.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Enable '-compat' if requested in qemu.conf and supported by qemu to
instruct qemu to crash when a deprecated command is used and stop
returning deprecated fields.
This setting is meant for libvirt developers and such.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Similar to the qemu.conf knob 'deprecation_behavior' add a per-VM knob
in the QEMU namespace:
<qemu:deprecation behavior='...'/>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is available in QEMU with "ide-hd" and "scsi-hd" device
types. It was originally mistakenly added to the "scsi-block"
device type too, but later removed. This doesn't affect libvirt
since we restrict usage to device=disk.
When this property is not set then QEMU's default behaviour
is to not report any rotation rate information, which
causes most guest OS to assume rotational storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The
<os firmware='efi'>
<firmware type='efi'>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
repeats the firmware attribute twice. This has no functional benefit, as
evidenced by fact that we use a single struct field to store both
attributes, while needlessly introducing an error scenario. The XML can
just be simplified to:
<os firmware='efi'>
<firmware>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
which also means that we don't need to emit the empty element
<firmware type='efi'/> for all existing configs too.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With this, incomplete XML without <frames/> for <rx/> in coalesce
won't raise error as before. It will leave the coalesce parameter
empty, thanks to passing it as a parameter and return an integer
to indicate error state - previously it returned pointer (or NULL
for both error and incomplete XML).
I also added a test case to test this functionality in the
qemuxml2xmltest.
The code went through some refactoring:
* change of a condition
* addition of a parameter
* change of order, that allowed removal of VIR_FREE
* removal of redundant labels and variables
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1535930
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Base the detection on the presence of the 'secret' qom-type entry, which
isn't conditionally compiled in qemu.
All caps-based test now switch to using JSON for -object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a selection of tests making exapmple use of -object prior to change
to the JSON format for -object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test has interesting config of the memory backend object. Preserve
the 5.2 output too since it's prior to JSONification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The file is unused since commit e34097750a split
the test file for VXHS and NBD protocols.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the firmware auto-selection was introduced it always picked first
usable firmware based on the JSON descriptions on the host. It is
possible to add/remove/change the JSON files but it will always be for
the whole host.
This patch introduces support for configuring the auto-selection per VM
by adding users an option to limit what features they would like to have
available in the firmware.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the 'sev0' sev-guest object will never be hotplugged, but we want
to generate it through JSON so that we'll be able to validate all
parameters of '-object' against the QAPI schema once 'object-add' is
qapified in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).
Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
- VNC - set to "none", unless passthrough of host env variable is set
- SPICE - always set to "spice"
- SDL - always passthrough host env
- No graphics - set to "none", unless passthrough of host env variable is set
The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.
If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.
This introduces support for configuring audio backends from the <audio>
elements in the XML config.
The existing default behaviour is now only used if no <audio> element is
present.
All except the 'jack' audio driver are supported via QEMU's old env
variable config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This allows the VNC client user to perform a shutdown, reboot and reset
of the VM from the host side.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -vnc since the change to use
QemuOpts in 2.2.0, so we check based on the new capability flag.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -spice since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -chardev since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <teaming> element in <interface> allows pairing two interfaces
together as a simple "failover bond" network device in a guest. One of
the devices is the "transient" interface - it will be preferred for
all network traffic when it is present, but may be removed when
necessary, in particular during migration, when traffic will instead
go through the other interface of the pair - the "persistent"
interface. As it happens, in the QEMU implementation of this teaming
pair (called "virtio failover" in QEMU) the transient interface is
always a host network device assigned to the guest using VFIO (aka
"hostdev"); the persistent interface is always an emulated virtio NIC.
When support was initially added for <teaming>, it was written to
require that the transient/hostdev device be defined using <interface
type='hostdev'>; this was done because the virtio failover
implementation in QEMU and the virtio guest driver demands that the
two interfaces in the pair have matching MAC addresses, and the only
way libvirt can guarantee the MAC address of a hostdev network device
is to use <interface type='hostdev'>, whose main purpose is to
configure the device's MAC address before handing the device to
QEMU. (note that <interface type='hostdev'> in turn requires that the
network device be an SRIOV VF (Virtual Function), as that is the only
type of network device whose MAC address we can set in a way that will
survive the device's driver init in the guest).
It has recently come up that some users are unable to use <teaming>
because they are running in a container environment where libvirt
doesn't have the necessary privileges or resources to set the VF's MAC
address (because setting the VF MAC is done via the same device's PF
(Physical Function), and the PF is not exposed to libvirt's container).
At the same time, these users *are* able to set the VF's MAC address
themselves in advance of staring up libvirt in the container. So they
could theoretically use the <teaming> feature if libvirt just skipped
the "setting the MAC address" part.
Fortunately, that is *exactly* the difference between <interface
type='hostdev'> (which must be a "hostdev VF") and <hostdev> (a "plain
hostdev" - it could be *any* PCI device; libvirt doesn't know what type
of PCI device it is, and doesn't care).
But what is still needed is for libvirt to provide a small bit of
information on the QEMU commandline argument for the hostdev, telling
QEMU that this device will be part of a team ("failover pair"), and
the id of the other device in the pair.
To make both of those goals simultaneously possible, this patch adds
support for the <teaming> element to plain <hostdev> - libvirt doesn't
try to set any MAC addresses, and QEMU gets the extra commandline
argument it needs)
(actually, this patch adds only the parsing/formatting of the
<teaming> element in <hostdev>. The next patch will actually wire that
into the qemu driver.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting a VM with swtpm device fails with qemu-system-aarch64.
E.g. with TPM device config
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
QEMU reports the following error
error: internal error: process exited while connecting to monitor:
2021-02-07T05:15:35.378927Z qemu-system-aarch64: -device
tpm-tis,tpmdev=tpm-tpm0,id=tpm0: 'tpm-tis' is not a valid device model name
Indeed the TPM device name is 'tpm-tis-device' [1][2] for aarch64,
versus the shorter 'tpm-tis' for x86. The devices are the same from
a functional POV, i.e. they both emulate a TPM device conforming to
the TIS specification. Account for the unfortunate name difference
when building the TPM device option in qemuBuildTPMDevStr(). Also
include a test case for 'tpm-tis-device'.
[1] https://qemu.readthedocs.io/en/latest/specs/tpm.html
[2] c294ac327c
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In commit 88957116c9 I've adapted
libvirt to QEMU's deprecation of -mem-path and -mem-prealloc and
switched to memory-backend-* even for system memory. My claim was
that that's what QEMU does under the hood anyway. And indeed it
was: see QEMU commit 900c0ba373aada4c13d47d95330aa72ec4067ba5 and
look at function create_default_memdev().
However, then commit d96c4d5f193e0e45beec80a6277728b32875bddb was
merged into QEMU. While it was fixing a bug, it also changed the
create_default_memdev() function in which it started turning off
use of canonical path (by setting
"x-use-canonical-path-for-ramblock-id" attribute to false). This
wasn't documented until QEMU commit
8db0b20415c129cf5e577a593a4a0372d90b7cc9. The path affects
migration - the same path has to be used on the source and on the
destination. Therefore, if there is old guest started with '-m X'
it has "pc.ram" block which doesn't use canonical path and thus
when migrating to newer QEMU which uses memory-backend-* we have
to turn off the canonical path explicitly. Otherwise,
"/objects/pc.ram" path would be expected by QEMU which doesn't
match the source.
Ideally, we would need to set it only for some machine types
(4.0 and older) because newer machine types already do what we
are doing. However, we treat machine types as opaque strings and
therefore we don't want to parse nor inspect their versions. But
then again, newer machine types already do what we are doing in
this commit, so when old machine types are deprecated and removed
we can remove our hack and forget it ever happened.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1912201
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The "max" model can be treated the same way as "host" model in general.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The test doesn't depend on a specific machine type.
The test uses a machine type which is becoming deprecated so it would
break the _LATEST version of the test once we update the qemu data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All of these options are actually supported by vhostuser disk so
we should allow them to be usable.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implements QEMU support for vhost-user-blk together with live
hotplug/unplug.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Pass the parameter clock rt to qemu to ensure that the
virtual machine is not synchronized with the host time
Signed-off-by: gongwei <gongwei@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wire up the QEMU command line for this option.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virtio related options iommu, ats and packed as driver element attributes
to vsock devices. Ex:
<vsock model='virtio'>
<cid auto='no' address='3'/>
<driver iommu='on'/>
</vsock>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As explained in QEMU commit 4c257911dcc7c4189768e9651755c849ce9db4e8
intel-pt features should never be included in the CPU models as it was
not supported by KVM back then and even once it started to be supported,
users have to enable it by passing pt_mode=1 parameter to kvm_intel
module. The Icelake-* CPU models with intel-pt included were added to
QEMU 3.1.0 and removed right in the following 4.0.0 release (and even in
3.1.1 maintenance release).
In libvirt 6.10.0 I introduced 'removed' attribute for features included
in our CPU model definitions which we can use to drop intel-pt from
Icelake-* CPU models. Back then I explained we can safely do so only for
features which could never be enabled, which is not the case of intel-pt.
Theoretically, it could be possible to create an environment in which
QEMU would enable intel-pt without asking for it explicitly: it would
need to use a new enough kernel (not available at the time of QEMU
3.1.0) and pt_mode KVM parameter in combination with QEMU 3.1.0 running
a domain with q35 machine type and all that on a CPU which didn't really
exist at that time.
Migrating such domain to a host with newer SW stack including libvirt
with this patch applied would result in incompatible guest ABI (the
virtual CPU would lose intel-pt). However, QEMU changed its CPU models
unconditionally and thus migration would not work even without this
patch. That said, it is safe to follow QEMU and remove the feature from
Icelake-* CPU models in our cpu_map.
https://bugzilla.redhat.com/show_bug.cgi?id=1853972
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Now we have everything prepared for generating the command line.
The device alias prefix was chosen to be 'virtiopmem'.
Since virtio-pmem-pci device goes onto PCI bus generating device
alias must have been changed slightly because
qemuAssignDeviceMemoryAlias() might have used DIMM slot number to
generate the alias. This obviously won't work and thus the "old"
way (which includes qemuDomainDeviceAliasIndex()) must be used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1735375
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.
To express this new model at domain XML level, I've chosen the
following:
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 154df5840d added support for <metadata_cache> as property of a
<disk>. Since the same parser is used to parse the XML used with
virDomainBlockCopy it starts the copy job with the appropriate cache
configured, but the <mirror> doesn't show this configuration nor it's
preserved if libvirtd is restarted during the mirror.
Add parsing, formatting and tests for <metadata_cache> for a <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
qemu's qcow2 driver allows control of the metadata cache of qcow2 driver
by the 'cache-size' property. Wire it up to the recently introduced
elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain specific cases it might be beneficial to be able to control
the metadata caching of storage image format drivers of a hypervisor.
Introduce XML machinery to set the maximum size of the metadata cache
which will be used by qemu's qcow2 driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, swtpm TPM state file is removed when a transient domain is
powered off or undefined. When we store TPM state on a shared storage
such as NFS and use transient domain, TPM states should be kept as it is.
Add per-TPM emulator option `persistent_sate` for keeping TPM state.
This option only works for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' persistent_state='yes'/>
</tpm>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we configure QEMU to prealloc memory almost by
default. Well, by default for NVDIMMs, hugepages and if user
asked us to (via memoryBacking <allocation mode="immediate"/>).
However, when guest's NVDIMM is backed by real life NVDIMM this
approach is not the best. In this case users should put <pmem/>
into the <memory/> device <source/>, like this:
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/pmem0</path>
<pmem/>
</source>
</memory>
Instructing QEMU to do prealloc in this case means that each
page of the NVDIMM is "touched" (the first byte is read and
written back - see QEMU commit v2.9.0-rc1~26^2) which cripples
device wear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1894053
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Let us introduce the xml and reply files for QEMU 5.2.0 on s390x.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In v6.8.0-27-g88957116c9 and friends I've switched the way the
default RAM is specified for QEMU (from plain -m to
memory-backend-*). This means, that even if a guest doesn't have
any NUMA nodes configured we can use memory-backend-* attributes
to translate user config requests. For instance, we can allow
memory to be shared (<access mode='shared'/> under
<memoryBacking/>). But what my original commits are missing is
allowing such configuration in our validator.
Fixes: 88957116c9
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1839034#c12
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-5.2 is out! Let's update the capabilities for the final version.
Note that the 'enable-fips' feature vanishing in this update is expected
as the removal was tied to a version check (see commit 7b1ed1cd73 ).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainControllerDefParseXML() does a lot of checks with
virDomainPCIControllerOpts parameters that can be moved to
virDomainControllerDefValidate, sharing the logic with other use
cases that does not rely on XML parsing.
'pseries-default-phb-numa-node' parse error was changed to reflect
the error that is being thrown by qemuValidateDomainDeviceDefController()
via deviceValidateCallback, that is executed before
virDomainControllerDefValidate().
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This check isn't exclusive to XML parsing. Let's move it to
virDomainDefVideoValidate() in domain_validate.c
We don't have a failure test for this scenario, so a new test called
'video-multiple-primaries' was added to test this failure case.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Test slices on top of nvme-backed disks.
Note that the changes in seemingly irrelevant parts of the output are
due to re-naming the nodenames.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainAlignMemorySizes() has an operation order problem. We are
calculating 'initialmem' without aligning the memory modules first.
Since we're aligning the dimms afterwards this can create inconsistencies
in the end result. x86 has alignment of 1-2MiB and it's not severely
impacted by it, but pSeries works with 256MiB alignment and the difference
is noticeable.
This is the case of the existing 'memory-hotplug-ppc64-nonuma' test.
The test consists of a 2GiB (aligned value) guest with 2 ~520MiB dimms,
both unaligned. 'initialmem' is calculated by taking total_mem and
subtracting the dimms size (via virDomainDefGetMemoryInitial()), which
wil give us 2GiB - 520MiB - 520MiB, ending up with a little more than
an 1GiB of 'initialmem'. Note that this value is now unaligned, and
will be aligned up via VIR_ROUND_UP(), and we'll end up with 'initialmem'
of 1GiB + 256MiB. Given that the dimms are aligned later on, the end
result for QEMU is that the guest will have a 'mem' size of 1310720k,
plus the two 512 MiB dimms, exceeding in 256MiB the desired 2GiB
memory and currentMemory specified in the XML.
Existing guests can't be fixed without breaking ABI, but we have
code already in place to align pSeries NVDIMM modules for new guests.
Let's extend it to align all pSeries mem modules.
A new test, 'memory-hotplug-ppc64-nonuma-abi-update', a copy of the
existing 'memory-hotplug-ppc64-nonuma', was added to demonstrate the
result for new pSeries guests. For the same unaligned XML mentioned
above, after applying this patch:
- starting QEMU mem size without PARSE_ABI_UPDATE:
-m size=1310720k,slots=16,maxmem=4194304k \ (no changes)
- starting QEMU mem size with PARSE_ABI_UPDATE:
-m size=1048576k,slots=16,maxmem=4194304k \ (size fixed)
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A previous patch removed the pSeries NVDIMM align that wasn't
being done properly. This patch reintroduces it in the right
fashion, making it reliant on VIR_DOMAIN_DEF_PARSE_ABI_UPDATE.
This makes it complying with the intended design defined by
commit c7d7ba85a6.
Since the PARSE_ABI_UPDATE is more restrictive than checking for
!migrate && !snapshot, like is being currently done with
qemuDomainAlignMemorySizes(), this means that we'll align the
pSeries NVDIMMs in two places - in post parse time for new
guests, and in qemuDomainAlignMemorySizes() for all guests
that aren't migrating or in a snapshot.
Another difference is that the logic is now in the QEMU driver
instead of domain_conf.c. This was necessary because all
considerations made about the PARSE_ABI_UPDATE flag were done
under QEMU. Given that no other driver supports ppc64 there is no
impact in this change.
A new test was added to exercise what we're doing. It consists
of a a copy of the existing 'memory-hotplug-nvdimm-ppc64' xml2xml
test, called with the PARSE_ABI_UPDATE flag. As intended, we're
not changing QEMU command line or any XML without the flag,
while the pseries NVDIMM memory is being aligned when the
flag is used.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can leave out things like USB controller, memballoon device,
kernel and initrd since they're not the focus of the tests.
Propagating some information from the output files back to the
input files makes it easier to compare them, as it reduces the
resulting diff, and in the case of the qemuxml2xml test for
memory-hotplug-ppc64-nonuma it allows us to convert the output
file into a symlink, since in the specific case the XML doesn't
change at all.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The ppc64 tests
memory-hotplug-ppc64-nonuma
memory-hotplug-nvdimm-ppc64
are not passed the same information for qemuxml2argv and
qemuxml2xml tests; the former, in particular, doesn't show up
at all in qemuxml2xml. Address this inconsistency.
Note that one of the new output files had been introduced with
5540acb9a2 despite not being actually used as of that commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The feature is never enabled by default on KVM and QEMU dropped it from
the models long ago.
https://bugzilla.redhat.com/show_bug.cgi?id=1798004
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The ESP SCSI controllers (NCR53C90, DC390, AM53C974) have the same
requirement as the LSI Logic controller for each disk to be set via
the scsi-id=NNN property, not the lun=NNN property.
Switching the code to use an enum will force authors to pay attention
to this difference when adding future SCSI controllers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Update the KVM feature tests for QEMU's kvm-poll-control performance
hint.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The unsignedInt XML schema type allows for values up to 2^32 - 1, i.e.,
using 4294967296 or greater TSC frequency would fail schema validation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add logic to validate and then pass through 'fmode' and 'dmode' to the
QEMU call.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose QEMU's 9pfs 'fmode' and 'dmode' options via attributes on the
'filesystem' node in the domain XML. These options control the creation
mode of files and directories, respectively, when using
accessmode=mapped.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simulate that the device is a cdrom when the path equals to /dev/cdrom
to provide testing for the 'host_cdrom' backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename 'FLAG_FIPS' to 'FLAG_FIPS_HOST' to signify that we are simulating
a host supporting fips mode and use the flag to assert 'enabeFips'
argument of 'qemuProcessCreatePretendCmdBuild' rather than passing it
via QEMU_CAPS_ENABLE_FIPS.
This prepares the testsuite for testing of -enable-fips deprecation in
qemu-5.2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This provides basic testing for the free-page-reporting feature that is
introduced in qemu 5.1.
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In 88957116c9 I've switched to -machine memory-backend=ID and
-object memory-backend-* because QEMU is obsoleting -mem-path
and -mem-prealloc. However, what I did not foresee was that using
-machine memory-backend in combination with -numa is not allowed
in QEMU. This was reported upstream and fortunately not released
yet.
The problem is that if domain has NUMA nodes then we will
generate memory-backend-* objects for NUMA nodes (because if QEMU
is new enough to expose default RAM ID it also supports -numa
memdev=) and adding non-NUMA memory backend is wrong.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.
In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.
So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().
This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We didn't actually use this file. Change the disk type to 'file' so that
it works in qemu and add pre and post-blockdev invocations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Add minimal coverage for non-x86_64 timer validation
from commit 2f5d8ffebe
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When an error is expected, the error message will be checked.
This is expressed by creating an additional ".err" file containing
the expected error message.
It is added in order to make sure the expected errors
are not masked by other errors during test execution while
leveraging the existing framework.
In order to keep it simple, an input file cannot be reused
anymore to cover several expected error cases configured
in the test code. An input file can still be reused by creating
a test case specific symlink.
For consistency, the mock needs to report an error now, too,
as every failure must have an error; otherwise a test case will
fail.
Require LC_ALL=C explicitly to make sure error messages are not
localized for testing.
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.
However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.
This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.
This reverts the following commits:
- commit 2d93cbdea9
Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"
- commit 0ee56369c8
qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type
- commit 07de813924
qemu_domain.c: do not auto-align ppc64 NVDIMMs
- commit 0ccceaa57c
qemu_validate.c: add pSeries NVDIMM size alignment validation
- commit 4fa2202d88
qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'readonly' hostdev property is stored separately from the
virStorageSource as some hostdevs are not described by a virStorage
source. We need to propagate the flag to the virStorage source also for
iSCSI backends as it's used to generate the backend properties.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1868856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test that we can cope with a long useralias when generating SCSI hostdev
commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU's blockdev nodenames which are used to back SCSI/iSCSI hostdevs are
limited to 32 characters. If a user passes a very long user alias as
name of the host device it's easy to end up with a too-long nodename.
To prevent this from happening don't base the nodename on the possibly
user-specified alias but on the normal sequential node name generator.
We then store the name in the status XML for further use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The secret object is used to pass data to the backend so it's better
fitting to base the secret object name on the SCSI host device backend
name.
Since we store the object alias in the status XML this modification is
safe in regards to existing guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a SCSI host device with a user-specified alias to illustrate the
upcoming changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The existing auto-align behavior for pSeries has the idea to
alleviate user configuration of the NVDIMM size, given that the
alignment calculation is not trivial to do (256MiB alignment
of mem->size - mem->label_size value, a.k.a guest area). We
align mem->size down to avoid end of file problems.
The end result is not ideal though. We do not touch the domain
XML, meaning that the XML can report a NVDIMM size 255MiB smaller
than the actual size the guest is seeing. It also adds one more
thing to consider in case the guest is reporting less memory
than declared, since the auto-align is transparent to the
user.
Following Andrea's suggestion in [1], let's instead do an
size alignment validation. If the NVDIMM is unaligned, error out
and suggest a rounded up value. This can be bothersome to users,
but will bring consistency of NVDIMM size between the domain XML
and the guest.
This approach will force existing non-running pSeries guests to
readjust the NVDIMM value in their XMLs, if necessary. No changes
were made for x86 NVDIMM support.
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg01471.html
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD
It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.
With device property 'role', the value can be 'master' or 'peer'.
- 'master' (means 'master=on' in qemu), the guest will copy
the shared memory on migration to the destination host.
- 'peer' (means 'master=off' in qemu), the migration is disabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that 'numa-mem-supported' turned off for certain machine types
which in turn forced us to generate a newer command line in certain
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU is going to drop 'vxhs' in the upcoming release so we'll need to
track these separately to prevent test suite breakage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already test with real caps so there's no real need for this special
case. While it technically tested the state without TLS encryption key
secrets, it doesn't really matter that much.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
