Generated by the following spatch:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce command 'virsh domstats --dirtyrate' for reporting memory
dirty rate information. The info is listed as:
Domain: 'vm0'
dirtyrate.calc_status=2
dirtyrate.calc_start_time=1534523
dirtyrate.calc_period=1
dirtyrate.megabytes_per_second=5
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tools depend on keycode generated sources, so declare that as an
explicit dependency, otherwise it might fail with:
../tools/virsh-completer-domain.c:35:10: fatal error: 'virkeynametable_linux.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: b0f4cf25a6
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These functions are identical. Made using this spatch:
@@
expression path, mode;
@@
- virFileMakePathWithMode(path, mode)
+ g_mkdir_with_parents(path, mode)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The libvirt_recover_xattrs.sh script can be used to remove stale
XATTRs that were left behind by secdrivers (which should happen
only if there's an imbalance between set and restore calls).
Anyway, the script has '-n' switch which is supposed to perform
just a dry run, i.e. just to report which files have XATTRs set
without any attempt to remove them.
But, when rewriting the script a few months ago a typo was
introduced which made the script report no files even if there
were files with XATTRs.
Fixes: 5377177f80
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_auto* pointers to avoid the need of a cleanup label. The
type of the pointer 'virDomainPtr dom' was changed to its alias
'virshDomainPtr' to allow the use of g_autoptr().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This completer offers completion for --codeset argument of
send-key command.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation was heavily inspired by the glib version so it's a
drop-in replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib implementation doesn't tolerate NULL but in most cases we check
before anyways. The rest of the callers adds a NULL check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib variant doesn't accept NULL list, but there's just one caller
where it wasn't checked explicitly, thus there's no need for our own
wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After previous patches neither vshReadlineCommandGenerator() nor
vshReadlineOptionsGenerator() use prefix that user wants to
complete. The argument is marked as unused in both functions.
Drop it then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Firstly, move variable declarations into the inner most block
they are used. Secondly, use for() loop instead of while so that
we don't have to advance loop counter explicitly on 'continue'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The way we currently call completer callbacks is that if we've
found --option that user wants to complete value for and it has
callback set then the callback is called.
And just before that, if no --option to have the value completed
is found or is found and is of boolean type then a list of
--option is generated (for given command).
But these two conditions can never be true at the same time
because boolean type of --options do not accept values. Therefore
the calling of completer callback can be promoted onto the same
level as the --option list generation.
This means that merging of two lists can be dropped to and
completer callback can store its retval directly into @list (but
as shown earlier one of the string lists to merge is always
empty).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Completer callbacks generate all possible outputs ignoring any partial
input (e.g. prefix of a domain name) and then use vshCompleterFilter() to
filter out those strings which don't fit the partial input (prefix).
In contrast, vshReadlineCommandGenerator() does some internal filtering and
only generates completions that match a given prefix. Rather than treating
these scenarios differently, simply generate all possible options and
filter them all at the end.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Completer callbacks generate all possible outputs ignoring any partial
input (e.g. prefix of a domain name) and then use vshCompleterFilter() to
filter out those strings which don't fit the partial input (prefix).
In contrast, vshReadlineOptionsGenerator() does some internal filtering and
only generates completions that match a given prefix. Rather than treating
these scenarios differently, simply generate all possible options and
filter them all at the end.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The vshReadlineParse() function is called whenever user hits
<TAB><TAB>. If there is no command (or a partially written one),
then a list of possible commands is printed to the user. But, if
there is a command then its --options are generated. But
obviously, we can not generate --options if there already is an
--option that's expecting a value. For instance, consider:
virsh # start --domain <TAB><TAB>
In this case we want to call completer for --domain option, but
that's a different story.
Anyway, the way that we currently check whether --options list
should be generated is checking the type of the last --option. If
it isn't DATA, STRING, INT, or ARGV (all these expect a value),
then we can generate --option list. Well, writing the condition
this way is needlessly verbose and also prone to errors (see
d9a320bf97 for example).
We know that boolean type does not require a value. This leaves
us with the only type that was not mentioned yet - VSH_OT_ALIAS.
This is a special type for backwards compatibility and it refers
to another --option which can be just any type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There are two functions that are used to generate completion
lists: vshReadlineCommandGenerator() for command names and
vshReadlineOptionsGenerator() for --options for given command.
Both return a string list, but may also fail while constructing
it. For that case, they call g_strfreev() explicitly, which is
needless since we have g_auto(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The vshReadlineOptionsGenerator() function returns a string list
of all --options for given command. But the way that individual
items on the list are allocated can be written better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The aim of vshCompleterFilter() is to take a string list and a
prefix and remove all strings from the list that don't have the
desired prefix. The function is used to filter out those strings
returned by a completer callback that don't correspond with
user's (partial) input. For instance, domain name completer
virshDomainNameCompleter() returns all domain names and then
vshCompleterFilter() refines the list so that only domains with
correct prefix of their name are offered to user. This was a
design choice - it allows us to have shorter completers as they
do not have to copy the list filtering over and over.
Having said all of that, it may happen that a completer does not
return anything (e.g. there is no domain in requested state,
virsh is not connected and thus completer exited early, etc.). In
that case, the string list is NULL and vshCompleterFilter() can
simply return early.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This saves us explicit call of g_strfreev() in error path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
We've invented VSH_OT_ALIAS type for --option so that we can
rewrite some --options (e.g. fix spelling). For instance
blkdeviotune command uses this feature heavily:
--options-with-dash are preferred over old
--options_with_underscore. Both versions are supported but only
the new ones (not aliased) are documented and reported in --help.
Except for options completer, which happily put also aliased
versions in front of user's eyes.
Note, there is a second (gross) way we use aliases: to rewrite
options from --oldoption to --newoption=value (for instance
--shareable option of attach-disk is an alias of
--mode=shareable). And just like with the previous group - don't
generate them into the list of possible options.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There are few cases where STREQLEN() is called like this:
STREQLEN(var, string, strlen(string))
which is the same as STRPREFIX(var, string). Use STRPREFIX()
because it is more obvious what the check is doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Switch the secret value to 'g_autofree' for handling of the memory and
clear it out using virSecureErase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use a single buffer for the secret to make it easier to follow it's
lifecycle. For base64 decoding use a local temporary buffer which will
be cleared right away.
This also uses virSecureErase for clearing the bufer instead of
VIR_DISPOSE_N which is being phased out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the conditions to else if so that it's obvious that only one of
the cases will ever be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
pthread_sigmask() returns 0 on success and "a non-zero value
on failure", but not neccessarily a negative one.
Found by clang-tidy's "bugprone-posix-return" check.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
What code tries to achieve is that if no flags were provided to
either 'setmem' or 'setmaxmem' commands then the old (no flags)
API is called to be able to communicate with older daemons.
Well, the code can be simplified a bit.
Note that with this change the old no flag version of APIs is
used more often. Previously if --current argument was given it
resulted in *Flags() version to be called even though it is not
necessary - VIR_DOMAIN_AFFECT_CURRENT is implied.
Therefore, this change in fact allows virsh to talk with broader
set of daemons. No other user visible changes were made.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The way our bash completion string is that is gets user's input
and lets virsh completion code do all the work by calling 'virsh
complete -- $INPUT". The 'complete' command is a "secret",
unlisted command that exists solely for this purpose. After it
has done it's part, it prints candidates onto stdout, each
candidate on its own line, e.g. like this:
# virsh complete -- "net-u"
net-undefine
net-update
net-uuid
These strings are then stored into a bash array $A like this:
A=($($1 ${CMDLINE} complete -- "${INPUT[@]}" 2>/dev/null))
This array is then thrown back at bash completion to produce
desired output. So far so good. Except, when there is an option
with space. For instance:
# virsh complete -- start --domain ""
uefi\ duplicate
uefi
Bash interprets that as another array item because by default,
Internal Field Separator (IFS) = set of characters that bash uses
to split words at, is: space, TAB, newline. We don't want space
nor TAB. Therefore, we have to set $IFS when storing 'virsh
complete' output into the array.
Thanks to Peter who suggested it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/116
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If user is trying to auto complete a value that contains a space,
they have two options: use backslash to escape space or use
quotes, like this:
virsh # start --domain "domain with space<TAB>
However, in this case our tokenizer sees imbalance in (double)
quotes: there is a starting one that's missing its companion.
Well, that's obvious - user is still in process of writing the
command. What we need to do in this case is to ignore the
imbalance and return success (from the tokenizer) - readline will
handle closing the quote properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way that auto completion works currently is that user's input
is parsed, and then we try to find the first --option (in the
parsed structure) that has the same value as user's input around
where <TAB> was pressed. For instance, for the following input:
virsh # command --arg1 hello --arg2 world<TAB>
we will see "world" as text that user is trying to autocomplete
(this is affected by rl_basic_word_break_characters which
readline uses internally to break user's input into individual
words) and find that it is --arg2 that user is trying to
autocomplete. So far so good, for this naive approach. But
consider the following example:
virsh # command --arg1 world --arg2 world<TAB>
Here, both arguments have the same value and because we see
"world" as text that user is trying to autocomplete we would
think that it is --arg1 that user wants to autocomplete. This is
obviously wrong.
Fortunately, readline stores the current position of cursor (into
rl_point) and we can use that when parsing user's input: whenever
we reach a position that matches the cursor then we know that
that is the place where <TAB> was pressed and hence that is the
--option that user wants to autocomplete. Readline stores the
cursor position as offset (numbered from 1) from the beginning of
user's input. We store this input into @parser->pos initially,
but then advance it as we tokenize it. Therefore, what we need is
to store the original position too.
Thanks to Martin who helped me with this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way our completer callbacks work is that they return all
possible candidates and then vshCompleterFilter() is called to
prune the list of all candidates removing those which don't match
user's input. This allows us to have simpler completer callbacks
as their only job is to fetch all possible candidates.
Anyway, if the completion candidate we're returning contains a
space, it has to be escaped (shell like escaping), unless there
is already a quote character (single quote or double quote).
But ordering is critical. Completer callback returns string
without any escaping, but the filter function sees the user input
escaped. For instance, if user's input is "domain with
space<TAB>" then the filtering function gets "domain\ with\
space" as user's input but completer returns "domain with space".
Since these two strings don't match the filtering function
removes this candidate from the list. What we need to do is to
escape strings before calling the filtering function. This way,
the filtering function will see two same strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In next commit the block that does escaping of returned string
will be brought into this block. But both contain variable @buf
and use it in different contexts. Rename @buf from @state == 0
block to @line which reflects its purpose better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of freeing @partial and @buf explicitly, we can use
g_auto*() to do that automatically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On readline completion vshReadlineCompletion() is called which
does nothing more than calling rl_completion_matches() with
vshReadlineParse() as a callback. This means, that
vshReadlineParse() is called repeatedly, each time returning next
completion candidate, until it returns NULL which is interpreted
as the end of the list of candidates.
The function takes two parameters: @text which is a portion of
input line around cursor when TAB was pressed, and @state. The
@state is an integer that is zero on the very first call and
non-zero on each subsequent call (in fact, readline does @state++
on each call).
Anyway, the idea is that the callback gets the whole list of
candidates on @state == 0 and returns one candidate at each call.
And this is what vshReadlineParse() is doing but some variables
(@partial, @cmd and @opt) are really used only in the @state == 0
case but declared for whole function. We can limit their scope by
declaring them inside the @state == 0 body which also means that
they don't have to be static anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backslash is the way we escape characters in virsh. For
instance:
virsh # start domain\ with\ long\ name
For readline completion, we do not want to get four separate
words ("domain", "with", "long", "name"). This means, that we
can't use virBufferEscapeShell() because it doesn't escape spaces
the way we want.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This variable is unused since introduction of the function in
v0.8.5~150.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way this completer works is that it dumps XML of specified
domain and then tries to look for @name attribute of <alias/>
element. However, the XPATH it uses is not correct which results
in no aliases returned by the completer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As can be seen in commit 8a62a1592a (from
autoconf era), the coverage flags have to be used also when linking
objects. However, this was not reflected when we switched to meson.
Without this patch linking fails with undefined references to various
__gcov_* symbols.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All these headers are indirectly included provided by virfile.h having
virstoragefile.h which will be removed in the following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
