Use automatic memory clearing and remove the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variables and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variable and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variable and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the fix to 'qemuDomainBlocksStatsGather' we should be
always fetching the full backing chain so that we can avoid any
automatic filter notes which would prevent us from fetching the stats
for the correct nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain cases such as when running a backup blockjob qemu installs a
filter node between the frontend and the top node of the backend of the
disk. The stats gathering code didn't instruct the monitor code to fetch
the stats for all the layers, so since the top layer now doesn't have
stats we were reporting wrong stats such as allocation.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2015281
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using swtpm v0.7.0 we can run swtpm_setup to create default config files
for swtpm_setup and swtpm-localca in session mode. Now a user can start
a VM with an attached TPM without having to run this program on the
command line before. This program needs to run once.
This patch addresses the issue raised in
https://bugzilla.redhat.com/show_bug.cgi?id=2010649
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Libvirt will put the pid file of virtiofsd to per-domain directory.
However, the ownership of the per-domain directory is the user to run
the QEMU process and the user has the write permission of the directory.
If VM escape occurs, the attacker can
1. write arbitrary content to the pid file (if running QEMU using root),
then the attacker can kill any process by writing appropriate pid to
the pid file;
2. spoof the pid file (if running QEMU using a regular user), then the
virtiofsd process will never be cleared even if the VM is destroyed.
So, move the pid file of virtiofsd from per-domain directory to
stateDir.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt will put the pid file of pr-helper to per-domain directory.
However, the ownership of the per-domain directory is the user to run
the QEMU process and the user has the write permission of the directory.
If VM escape occurs, the attacker can
1. write arbitrary content to the pid file (if running QEMU using root),
then the attacker can kill any process by writing appropriate pid to
the pid file;
2. spoof the pid file (if running QEMU using a regular user), then the
pr-helper process will never be cleared even if the VM is destroyed.
So, move the pid file of pr-helper from per-domain directory to
stateDir.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When parsing of the node device XML fails we'd still call the post-parse
and validation callbacks which makes no sense. Additionally the
callbacks were expecting a non-NULL pointer which leads to a crash.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014139
Fixes: d5ae634ba2
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:
{ "execute": "COMMAND" }
and optionally also:
{ "execute": "COMMAND", "arguments":...}
For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:
virsh qemu-monitor-command $VM query-status
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-status"}'
and
virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
or
virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Normally this would be considered an internal detail which we don't
document in the news, but in this case I'd like to make people aware of
the change so that they preferrably report them ASAP.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we use JSON with -device we can validate it at least partially
(since the schema for 'device_add' is for now incomplete) against the
QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU-6.2 started accepting a JSON object as argument for
'-device' which will also become the only syntax considered stable by
qemu in the future.
Since libvirt was recently converted to generate the properties via JSON
to begin wit we can start using it on the commandline as well, by simply
enabling the QEMU_CAPS_DEVICE_JSON capability, which we do by probing
for the 'json-cli' feature flag of 'device_add'.
Normally a change which changes a commandline output should be happening
only after the impacted real-caps test files are forked in the version
preceding the change, but in this case it's not necessary as the logic
for generating the device properties stays identical and we just change
the output format (avoid conversion). Additionally we still have a lot
of tests validating the conversion to the old commandline options.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'allowIncomplete' argument of testQEMUSchemaValidateCommand to
validate at least properties which are already described by the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP schema for 'device_add' is not complete yet. Allow validation of
incomplete schema so that we can enable at least some validation. Once
there's more schema in the future all present members are still
validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1510-gc148a05721 which most notably adds the 'json-cli'
feature for 'device_add' QMP command meaning that -device accepts JSON.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two variables (@vm and @domflags) in qemuConnectGetAllDomainStats()
that are used only within the for() loop but declared for entire function.
Bring them into the loop to make it obvious they are not used outside of it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Our general pattern is to initialize @ret to -1 and set it to 0
only at the end of a function. Some functions in
objecteventtest.c do not follow this pattern.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The sole purpose of the lifecycleEventCounter_reset() function is
to zero out given lifecycleEventCounter struct. Well, we can let
the compiler zero it out when declaring a variable and just
remove the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
I think that virsh domstats problem on qemu < 5.2.0 is what users want
to find which version fixes.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
By this commit, qemu domain stats will check capabilities requirements before issuing actual query.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
One of qemuDomainGetStatsWorkers requires capabilities to run.
This commit adds capability information to qemuDomainGetStatsWorkers.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
In this commit, add capability flag for query-dirty-rate first.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There have been countless reports from users concerned about the following
error reported by libvirtd when qemu domains are shutdown
internal error: End of file from qemu monitor
While the error is harmless, users often mistaken it for real problem with
their deployments. EOF from the monitor can't be entirely ignored since
other threads may be using the monitor and must be able to detect the EOF
condition.
One potential fix is to delay reporting EOF until the monitor is used
after EOF is detected. This patch adds a 'goteof' member to the
qemuMonitor structure, which is set when EOF is detected on the monitor
socket. If another thread later tries to send data on the monitor, the
EOF error is reported.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few functions in virnetsocket.c where an object/memory
is freed by explicit call. Use g_autoptr()/g_autofree/VIR_AUTOCLOSE
to do that automatically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of virNetSocketNewConnectCommand() is to execute passed
command and attach socket pair/pipe to it so that client socket
can be opened (this is used for connections with alternative
transports, e.g. ssh). The virCommand is created in a caller and
then passed to virNetSocketNewConnectCommand() where it is freed
using virCommandFree(). This approach is wrong on two levels:
1) The deallocation happens on a different level than allocation,
2) There's a WIN32 stub that just reports an error and doesn't
free the command.
However, with g_autoptr() trickery the command can be freed in
caller.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit ad209e7d adds QEMU_CAPS_VIRTIO_BLK_QUEUE_SIZE capability, but
the following commit 2d6d67e1 missed to use it and uses
QEMU_CAPS_VIRTIO_BLK_NUM_QUEUES instead.
This commit fixes the mistake.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,ats=. Since the property was introduced in QEMU commit
v2.9.0-rc0~162^2~32 we can safely assume the property is always
present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver ats=''/> when
QEMU_CAPS_VIRTIO_PCI_ATS capability is not present. Well, such
scenario can't happen really because the capability will always
be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,iommu_platform=. Since the property was introduced in
QEMU commit v2.9.0-rc0~162^2~37 we can safely assume the property
is always present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver iommu=''/> when
QEMU_CAPS_VIRTIO_PCI_IOMMU_PLATFORM capability is not present.
Well, such scenario can't happen really because the capability
will always be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a few files containing expected output for test cases
that no longer exist. Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We did not set priv->migMaxBandwidth if '--bandwidth' was
specified as an option in the 'migrate' virsh command. This
caused in printing the wrong value if virsh command
'migrate-getspeed' was called during the migration. This patch
first sets the value to the given bandwidth (if one was
specified) and restores the previous value after the migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1806856
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
QEMU declares the bootindex types as:
bootindexA=<int32>
bootindexB=<int32>
The driveA/driveB parameters were deprecated and removed in qemu-6.0.
We'll keep them for compatibility, but they are not used with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildFloppyCommandLineControllerOptions was generating config for
both the implicit and explicit fdc. The explicit FDC is using '-device'
and thus will need to be converted to JSON.
Split up the lookup of the floppy drive configs from the actual command
generation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU declares the props we control as:
'ccid-card-emulated'
backend=<str>
cert1=<str>
cert2=<str>
cert3=<str>
db=<str>
'ccid-card-passthru'
chardev=<str> - ID of a chardev to use as a backend
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While this device doesn't have any properties it must be converted to
use qemuBuildDeviceCommandlineFromJSON so that we can validate it in the
future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU declares the 'guid' property as:
guid=<str> - UUID (aka GUID) or "auto" for random value (default) (default: "auto")
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it into the validator. Note that the placement into the device
validation part is intentional so that it also covers hotplug code
paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a commonly used helper virDomainControllerAliasFind, which does
the same thing and also reports errors internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'virXMLPropEnum' to parse it and fix all switch statements which
didn't include the VIR_DOMAIN_SMARTCARD_TYPE_LAST case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't check the type twice, move the chardev validation into the
switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the code was converted to use this helper we can remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
