Both RHEL and Fedora build with driver modules enabled by
default, so there is no need for any conditional.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A client only build dates back to RHEL5 where some architectures
did not build the libvirtd daemon, only the clients. Since RHEL5
was dropped this is no longer required.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Simplify conditionals to assume Fedora >= 20 or RHEL >= 6
The %prep section will explicitly check the version and
refuse to run if insufficient.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previous commit moved some lists out of the -devel package
and into the -docs package
commit feffcc03a0d3690dcffd860682dcbaa61d726b39
Author: Cole Robinson <crobinso@redhat.com>
Date: Wed Apr 13 10:37:42 2016 -0400
spec: Only pull in API docs with -devel package
What was not realized is that the rule 'libvirt-docs/*'
and ' docs/*.html docs/html docs/*.gif' actually point
to the exact same content. ie, we had previously included
the website HTML in *both* the -docs and -devel packages.
So this change ended up listing the files twice, which
caused RPM to print a load of warnings:
warning: File listed twice: /usr/share/doc/libvirt-docs/html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/32favicon.png
warning: File listed twice: /usr/share/doc/libvirt-docs/html/404.html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/acl.html
warning: File listed twice: /usr/share/doc/libvirt-docs/html/aclpolkit.html
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If libvirt-daemon-config-network is installed while libvirtd is already
running, the daemon doesn't notice the network. Users then have to
manually restart libvirtd (or reboot) to pick up the network.
Instead let's trigger a daemon restart when the package is first installed.
Then the default network is available immediately if libvirtd was already
running.
https://bugzilla.redhat.com/show_bug.cgi?id=867546
This reverts commit 1e9808d3a1e00a7121bae8b163d9c42d441d2ca8.
We shouldn't advertise libvirtd.socket activation, since currently
it means VM/network/... autostart won't work as expected.
We tried to find a middle ground by installing the config file without
an [Install] section, since systemd won't allow .socket to be enabled
without one... or at least it did do that; presently on f24 it allows
activating the socket quite happily. This also caused user confusion[1]
Just remove the socket file. I've filed a new RFE to track coming up
with a solution to the autostart problem[2], we can point users at that
if there's more confusion:
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1279348
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1326136
Move some API specific documentation out of -docs package and into
-devel, and some end user docs out of -devel and into -docs, then
drop the -devel dep on -docs. This is more in line with the suggested
Fedora guidelines.
https://bugzilla.redhat.com/show_bug.cgi?id=1310155
Using one Makefile per example subdirectory essentially serializes 'make'
calls. Convert to one example/Makefile that builds and distributes
all the subdir files. This reduces example/ rebuild time from about 5.8
seconds to 1.5 seconds on my machine.
One slight difference is that we no longer ship Makefile.am with the
examples in the rpm. This was virtually useless anyways since the Makefile
was very specific to libvirt infrastructure, so wasn't generically
reusable anyways.
Tested with 'make distcheck' and 'make rpm'
When installing the libvirt-daemon RPM, we have a %post rule to
enable the libvirtd.service, virtlockd.socket and virtlogd.socket
files. This is only done, however, when the RPM is first installed,
not when upgrading RPMs. So virtlogd will not get activated on
upgrading, which is a problem as libvirt qemu driver will expect
it to be available by default.
This adds a trigger that is run when uninstalling libvirt-daemon
older than 1.3.0 that will enable & start virtlogd.socket if
libvirtd is enabled and/or started. Using the trigger rather
than %post ensures that it only runs once, allowing admins to
disable it explicitly thereafter without future upgrades
re-enabling it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 48cd3dfa668e5033b02dd029c2e6de558a3c4583 introduced configuration
file for libvirt-admin but forgot to distribute it. Also the change
made to libvirt.conf in commit dbecb87f94e8f1591e3c471b34ae48a7203c9cb3
should've been removed thanks to introduction of separate config file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virt-admin binary and its man page should not yet be distributed,
but we need libvirt-common.h. RPM build fails without specifying these.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There has been a report on the list [1] that we are not
installing the wireshark dissector into the correct plugin
directory. And in fact we are not. The problem is, the plugin
directory path is constructed at compile time. However, it's
dependent on the wireshark version, e.g.
/usr/lib/wireshark/plugins/1.12.6
This is rather unfortunate, because if libvirt RPMs were built
with one version, but installed on a system with newer one, the
plugins are not really loaded. This problem lead fedora packagers
to unify plugin path to:
/usr/lib/wireshark/plugins/
Cool! But this was enabled just in wireshark-1.12.6-4. Therefore,
we must require at least that version.
And while at it, on some distributions, the wireshark.pc file
already has a variable that defines where plugin dir is. Use that
if possible.
1: https://www.redhat.com/archives/libvirt-users/2015-October/msg00063.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I'm hitting this little annoyance in fedora's package repo:
$ fedpkg prep
Downloading libvirt-1.2.20.tar.gz
...
+ /usr/bin/gzip -dc /home/crobinso/src/fedora/libvirt/libvirt-1.2.20.tar.gz
$ git clean -xdf
Removing libvirt-1.2.20.tar.gz
Skipping repository libvirt-1.2.20/
We git-ify the libvirt directory as part of applying patches in the spec
file, but 'git clean' will ignore subfolders that appear to be standalone
git repos.
Let's just delete the .git directory after we're done with it.
In previous change:
commit 29b5167417483ef80f6c3fce12811b59a1e2bd55
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Tue Aug 4 14:05:52 2015 +0200
examples: Add example polkit ACL rules
The polkit examples were accidentally added to the spec inside
a %if %{with_network} conditional.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
$ rpmbuild -ba libvirt.spec
warning: Macro expanded in comment on line 5: # If neither fedora nor rhel was defined, try to guess them from %{dist}
warning: Macro %enable_autotools defined but not used within scope
warning: Macro %client_only defined but not used within scope
...
Commit f1f68ca33433 tried fixing running multiple domains under various
users, but if the user can't browse the directory, it's hard for the
qemu running under that user to create the monitor socket.
The permissions need to be fixed in two places in the spec file due to
support for both installations with and without driver modules.
Creating a directory with '$(MKDIR_P) -m' shouldn't fail even on systems
where autoconf needs to fallback to 'install-sh -d'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit e755186c5c30 added the rename example, but forgot to build some
essential files in there as well as add it to the spec file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Creating ACL rules is not exactly easy and existing examples are pretty
simple. This patch adds a somewhat complex example which defines several
roles. Admins can do everything, operators can do basic operations
on any domain and several groups of users who act as operators but only
on a limited set of domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As of fedora polkit-0.113-2, polkit-devel only pulls in polkit-libs, not
full polkit, but we need the latter for pkcheck otherwise our configure
test fails.
