If no explicit driver is set for an image backed filesystem,
set it to use the loop driver (if raw) or nbd driver (if
non-raw)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A couple of places in LXC setup for filesystems did not do
a "goto cleanup" after reporting errors. While fixing this,
also add in many more debug statements to aid troubleshooting
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The alias for hostdevs of type SCSI can be too long for QEMU if
larger LUNs are encountered. Here's a real life example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1088634913'/>
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
this results in a too long drive id, resulting in QEMU yelling
Property 'scsi-generic.drive' can't find value 'drive-hostdev-scsi_host0-0-19-1088634913'
This commit changes the alias back to the default hostdev$(index)
scheme.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
In case libvirtd is asked to unplug a device but the device is actually
unplugged later when libvirtd is not running, we need to detect that and
remove such device when libvirtd starts again and reconnects to running
domains.
Attempts to start a domain with both SELinux and DAC security
modules loaded will deadlock; latent problem introduced in commit
fdb3bde and exposed in commit 29fe5d7. Basically, when recursing
into the security manager for other driver's prefork, we have to
undo the asymmetric lock taken at the manager level.
Reported by Jiri Denemark, with diagnosis help from Dan Berrange.
* src/security/security_stack.c (virSecurityStackPreFork): Undo
extra lock grabbed during recursion.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code parsing VIR_TEST_RANGE mistakenly used 'unsigned int i'
which violated syntax-check rules
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When debugging a failing test with many test cases, it is useful
to be able to skip most tests. Introducing a new environment
variable VIR_TEST_RANGE=N-M enables execution of only the test
cases numbered N-M inclusive, starting from 1.
For example, to skip all the cgroup tests except 2
$ VIR_TEST_RANGE=2-3 VIR_TEST_DEBUG=1 ./vircgrouptest
TEST: vircgrouptest
2) New cgroup for driver ... Unexpected found LXC cgroup: 1
libvirt: Cgroup error : Failed to create controller cpu for group: No such file or directory
FAILED
3) New cgroup for domain driver ... Cannot find LXC cgroup: 1
libvirt: Cgroup error : Failed to create controller cpu for group: No such file or directory
FAILED
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Upstream gnulib recently patched a bug in bootstrap, for projects
that use a different name than build-aux for a subdirectory. We
don't, but it doesn't hurt to update.
* .gnulib: Update, for bootstrap fix.
* bootstrap: Sync to upstream.
* bootstrap.conf: Match upstream bug fix.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, in the autogen.sh script we check whether .git is an existing
directory in which case bootstrap is run. However, if libvirt is a
submodule, then the .git is just a file (with reference to the topmost
.git directory). However, our submodule routines work well. So there's
no real reason why we should prohibit users to build libvirt from
submodule.
Makefiles are another easy file to enforce line limits.
Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression
* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 75c1256 states that virGetGroupList must not be called
between fork and exec, then commit ee777e99 promptly violated
that for lxc's use of virSecurityManagerSetProcessLabel. Hoist
the supplemental group detection to the time that the security
manager needs to fork. Qemu is safe, as it uses
virSecurityManagerSetChildProcessLabel which in turn uses
virCommand to determine supplemental groups.
This does not fix the fact that virSecurityManagerSetProcessLabel
calls virSecurityDACParseIds calls parseIds which eventually
calls getpwnam_r, which also violates fork/exec async-signal-safe
safety rules, but so far no one has complained of hitting
deadlock in that case.
* src/security/security_dac.c (_virSecurityDACData): Track groups
in private data.
(virSecurityDACPreFork): New function, to set them.
(virSecurityDACClose): Clean up new fields.
(virSecurityDACGetIds): Alter signature.
(virSecurityDACSetSecurityHostdevLabelHelper)
(virSecurityDACSetChardevLabel, virSecurityDACSetProcessLabel)
(virSecurityDACSetChildProcessLabel): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch wants the DAC security manager to be able to safely
get the supplemental group list for a given uid, but at the time
of a fork rather than during initialization so as to pick up on
live changes to the system's group database. This patch adds the
framework, including the possibility of a pre-fork callback
failing.
For now, any driver that implements a prefork callback must be
robust against the possibility of being part of a security stack
where a later element in the chain fails prefork. This means
that drivers cannot do any action that requires a call to postfork
for proper cleanup (no grabbing a mutex, for example). If this
is too prohibitive in the future, we would have to switch to a
transactioning sequence, where each driver has (up to) 3 callbacks:
PreForkPrepare, PreForkCommit, and PreForkAbort, to either clean
up or commit changes made during prepare.
* src/security/security_driver.h (virSecurityDriverPreFork): New
callback.
* src/security/security_manager.h (virSecurityManagerPreFork):
Change signature.
* src/security/security_manager.c (virSecurityManagerPreFork):
Optionally call into driver, and allow returning failure.
* src/security/security_stack.c (virSecurityDriverStack):
Wrap the handler for the stack driver.
* src/qemu/qemu_process.c (qemuProcessStart): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Long lines are harder to read and harder to diff; in fact, if lines get
too long (> 1000 bytes), it starts causing issues where git send-email
refuses to send patches for the file. I've cleaned up the tests
directory in the past (see commits bd6c46f, 3b750d1), but new long
lines have been introduced in the meantime.
Why 90 instead of 80? Because there were too many tests on the fringe
edge, and I didn't want to edit that many files.
Add a syntax check to prevent future long lines.
* cfg.mk (sc_prohibit_long_lines): New rule.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any
file with content longer than 90 columns.
* tests/storagevolxml2argvdata/*.argv: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Some versions of kFreeBSD (like 9.0) declare link_addr in a header
but lack an implementation. This makes ./configure pass but breaks
compilation later with a
undefined reference to `link_addr'
Althought that's a bug in the OS header we can detect it easily by also
trying to link.
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=715320
These helpers use the remembered host capabilities to retrieve the cpu
map rather than query the host again. The intended usage for this
helpers is to fix automatic NUMA placement with strict memory alloc. The
code doing the prepare needs to pin the emulator process only to cpus
belonging to a subset of NUMA nodes of the host.
When user does not specify any model for scsi controller, or worse, no
controller at all, but libvirt automatically adds scsi controller with
no model, we are not searching for virtio-scsi and thus this can fail
for example on qemu which doesn't support lsi logic adapter.
This means that when qemu on x86 doesn't support lsi53c895a and the
user adds the following to an XML without any scsi controller:
<disk ...>
...
<target dev='sda'>
</disk>
libvirt fails like this:
# virsh define asdf.xml
error: Failed to define domain from asdf.xml
error: internal error Unable to determine model for scsi controller
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=974943
With the majority of fields in the virLXCDriverPtr struct
now immutable or self-locking, there is no need for practically
any methods to be using the LXC driver lock. Only a handful
of helper APIs now need it.
The activeUsbHostdevs item in LXCDriver are lockable, but the lock has
to be called explicitly. Call the virObject(Un)Lock() in order to
achieve mutual exclusion once lxcDriverLock is removed.
The 'driver->caps' pointer can be changed on the fly. Accessing
it currently requires the global driver lock. Isolate this
access in a single helper, so a future patch can relax the
locking constraints.
Currently the virLXCDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virLXCDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virLXCDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.
NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
If testQemuHotplugAttach succeeds, the vm->def steals the dev pointer.
However, not the envelope, which needs to be freed. In addition,
driver.config is allocated, but never freed.
When virAsprintf was changed from a function to a macro
reporting OOM error in dc6f2da, it was documented as returning
0 on success. This is incorrect, it returns the number of bytes
written as asprintf does.
Some of the functions were converted to use virAsprintf's return
value directly, changing the return value on success from 0 to >= 0.
For most of these, this is not a problem, but the change in
virPCIDriverDir breaks PCI passthrough.
The return value check in virhashtest pre-dates virAsprintf OOM
conversion.
vmwareMakePath seems to be unused.
Merge the virCommandPreserveFD / virCommandTransferFD methods
into a single virCommandPasFD method, and use a new
VIR_COMMAND_PASS_FD_CLOSE_PARENT to indicate their difference
in behaviour
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a "--pass-fds N,M,..." arg to the virsh start/create
methods. This allows pre-opened file descriptors from the
shell to be passed on into the guest
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wire up the new virDomainCreate{XML}WithFiles methods in the
LXC driver, so that FDs get passed down to the init process.
The lxc_container code needs to do a little dance in order
to renumber the file descriptors it receives into linear
order, starting from STDERR_FILENO + 1.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
