Commit Graph

779 Commits

Author SHA1 Message Date
Daniel P. Berrange
65d8c92a75 Add pkg-config files for libvirt-qemu & libvirt-lxc
For some reason there have never been pkg-config files created
for the libvirt-qemu.so and libvirt-lxc.so libraries.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-06-23 16:17:27 +01:00
Nehal J Wani
baafe668fa Add helper program to create custom leases
Introduce helper program to catch events from dnsmasq and maintain a custom
lease file per network. It supports dhcpv4 and dhcpv6. The file is saved as
"<interface-name>.status".

Each lease contains the following info:
<expiry-time (epoch time)> <mac> <iaid> <ip-address> <hostname> <clientid>

Example of custom leases file content:
[
    {
        "iaid": "1221229",
        "ip-address": "2001:db8:ca2:2:1::95",
        "mac-address": "52:54:00:12:a2:6d",
        "hostname": "Fedora20",
        "client-id": "00:04:1a:c1:d9:6b:5a:0a:e2:bc:f8:4b:1e:37:2e:38:22:55",
        "expiry-time": 1393244216
    },
    {
        "ip-address": "192.168.150.208",
        "mac-address": "52:54:00:11:56:b3",
        "hostname": "Wani-PC",
        "client-id": "01:52:54:00:11:56:b3",
        "expiry-time": 1393244248
    }
]

src/Makefile.am:
   * Add options to compile the helper program

src/network/bridge_driver.c:
   * Introduce networkDnsmasqLeaseFileNameCustom()
   * Invoke helper program along with dnsmasq
   * Delete the .status file when corresponding n/w is destroyed.

src/network/leaseshelper.c
   * Helper program to create the custom lease file
2014-06-02 11:45:10 +01:00
Daniel Veillard
7455be8ea9 Forgot spec changelog in 1.2.5 commit 2014-06-02 09:52:44 +08:00
Jiri Denemark
96eb7523e4 spec: Don't install nonexistent test_libvirt_lockd.aug
test_libvirt_lockd.aug is only generated when qemu driver is enabled.
2014-05-06 14:04:54 +02:00
Jiri Denemark
01cf9effcc spec: sanlock is x86_64 only on RHEL 2014-05-06 14:04:53 +02:00
Daniel Veillard
791fb3f668 Release of libvirt-1.2.4
* docs/news.html.in libvirt.spec.in: updates for release
* po/*.po*: fetched new localization and regenerated
2014-05-04 14:41:29 +08:00
Sahid Orentino Ferdjaoui
b21795bb5b Add a new example to illustrate domain migration
This commit adds a new example to illustrate peer to
peer domain migration with virDomainMigrateToURI.

Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@cloudwatt.com>
2014-04-30 14:29:07 +01:00
Eric Blake
110c0db88c conf: create common storage RNG grammar file
Having two tiny files with a couple definitions didn't make
as much sense as one common file, especially since I plan to
add more definitions and use it in more places.

* docs/schemas/storageencryption.rng: Merge this...
* docs/schemas/storagefilefeatures.rng: ...and this, into...
* docs/schemas/storagecommon.rng: ...this new file.
* docs/schemas/Makefile.am (schema_DATA): Reflect renames.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/domaincommon.rng: Likewise.
* libvirt.spec.in: Likewise.
* mingw-libvirt.spec.in: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-04-14 07:07:01 -06:00
Cédric Bosdonnat
ec70f3696f Introduce --without-pm-utils to get rid of pm-is-supported dependency
This uses the dbus api of systemd to check the power management
capabilities of the node.
2014-04-11 15:51:10 -06:00
Daniel Veillard
c53663ccdb Release of libvirt-1.2.3
* docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: pull updated translations and regenerate
2014-04-01 15:29:53 +08:00
Michael Chapman
9add02a0b0 spec: move some dirs into appropriate subpackages
This commit moves a few directories into more appropriate subpackages.
In a few cases a directory is owned by two subpackages, however this is
OK as long as the permissions and ownership for the directory are
consistent between them.

- %{_sysconfdir}/libvirt/qemu/

  Used by the qemu and network drivers.

  When building with separate driver modules, this directory is only
  owned by l-d-d-network. l-d-d-qemu has a hard dependency on
  l-d-d-network, which means this directory is created with the
  correct permissions and ownership, however it's clearer if both
  subpackages own the directory independently.

- %{_sysconfdir}/libvirt/nwfilter/

  Used by the nwfilter driver only.

  This directory is currently always owned by libvirt-daemon. This
  commit moves it into l-d-d-nwfilter when building with separate
  driver modules.

- %{_localstatedir}/run/libvirt/network/

  Used by the network and nwfilter drivers.

  When building without separate driver modules, this directory is
  should be owned by libvirt-daemon only if either of these drivers
  are enabled. When building with separate driver modules, this
  directory should be owned by l-d-d-nwfilter in addition to
  l-d-d-network.

- %{_datadir}/libvirt/networks/ and
  %{_datadir}/libvirt/networks/default.xml

  Used only by the %post scriptlet in libvirt-daemon-config-network.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2014-03-17 16:43:24 +01:00
Jiri Denemark
201082488f spec: Let translations be properly updated
Libvirt tarball contains po/stamp-po file which prevents any po/*.gmo
file to be regenerated even if a corresponding po/*.po file is newer. By
removing the stamp-po file, all *.gmo files are properly updated if
required. This allows downstreams to provide patches that update
translations.
2014-03-06 22:18:11 +01:00
Daniel Veillard
e8684eb541 Release of libvirt-1.2.2
- docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update localization and merge
2014-03-02 23:09:45 +08:00
Peter Krempa
1600966749 spec: Fix braces around macros
In commit 72f7658ba2 I've added a few
macros with bad bracing. Although they work as expected fix them so that
we use uniform syntax.
2014-02-26 14:31:30 +01:00
Eric Blake
dea81f40ec spec: make systemd_daemon usage configurable
On Fedora 20, I added this to my '~/.rpmmacros':

%_without_udev 1
%_without_storage_mpath 1
%_without_storage_disk 1

and uninstalled systemd-devel (which also removed device-mapper-devel).
Then I ran 'make rpm', and inspected the results:

$ ldd ~/rpmbuild/BUILD/libvirt-1.2.2/daemon/.libs/libvirtd | grep syst
$

Then I reinstalled systemd-devel, where I now see:

$ ldd ~/rpmbuild/BUILD/libvirt-1.2.2/daemon/.libs/libvirtd | grep syst
  libsystemd-daemon.so.0 => /lib64/libsystemd-daemon.so.0 (0x00007ffb858ba000)
$

Oops - the build is non-deterministic, where the final binary
depends on my build environment.  The fix is to require
systemd-devel in all situations where the code base uses it.
Now ~/.rpmmacros can contain "%define _without_systemd_daemon 1"
to explicitly disable use of the library, but the library is now
a strict build requirement for normal builds; if systemd-devel
is not installed, the user now gets an up-front warning:

$ rpmbuild -ta libvirt-1.2.2.tar.gz
error: Failed build dependencies:
       systemd-devel is needed by libvirt-1.2.2-1.fc20.x86_64

* libvirt.spec.in (with_systemd_daemon): New variable.
(BuildRequires): Require systemd-devel for more than just udev.
(%configure): Make choice of systemd_daemon explicit.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-26 06:02:57 -07:00
Eric Blake
7cac3afa50 spec: require device-mapper-devel for storage-disk
On Fedora 20, with the following in my ~/.rpmmacros:

%_without_udev 1
%_without_storage_mpath 1

and with device-mapper-devel uninstalled, 'make rpm' fails with:

checking for libdevmapper.h... no
configure: error: You must install device-mapper-devel/libdevmapper >= 1.0.0 to compile libvirt
error: Bad exit status from /var/tmp/rpm-tmp.Wo9pOG (%build)

This is a rather late point to be issuing an error; better is
to flag missing packages up front.  The fix is to match the logic
in configure.ac on when devmapper is required (for both mpath and
storage).  While at it, rbd storage is not dependent on mpath.
With this patch applied, I now get:

$ rpmbuild -ta libvirt-1.2.2.tar.gz
error: Failed build dependencies:
       device-mapper-devel is needed by libvirt-1.2.2-1.fc20.x86_64

until either installing the package or further modifying
~/.rpmmacros to add "%_without_storage_disk 1".

* libvirt.spec.in (BuildRequires): Fix build when mpath is
disabled.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-26 06:02:06 -07:00
Eric Blake
fa2939986d spec: explicitly avoid bhyve on Linux
Generally, we try to make the spec file tweakable via user
variables, so that they can select a different subset of sub-rpms
to build.  We also try to explicitly list all driver config
options, rather than leaving the chance that the rpm build may be
non-deterministic based on what the user had installed locally.
But in the case of the recent bhyve hypervisor driver, there is
no port of bhyve to Linux, so it is easier to just blindly
disable it for now.  If someone ever does try to port bhyve to
Fedora, we can make the spec file conditional at that point.

* libvirt.spec.in (%configure): Don't try to build bhyve.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-26 06:00:56 -07:00
Peter Krempa
72f7658ba2 spec: Use correct versions of libgfapi in RHEL builds
RHEL still uses the 3.4.0 package of libgfapi and the package is built
only for x86_64.
2014-02-26 13:24:45 +01:00
Eric Blake
dca5ce4c65 spec: add missing dep of libvirt-daemon-config-nwfilter
Similar to cf76c4b, if modules are used, then nwfilter configuration
requires the nwfilter driver module.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-13 06:39:51 -07:00
Eric Blake
d181452132 Revert "spec: require libvirt-wireshark from libvirt metapackage"
This reverts commit 8d6c3659b8.

After further list discussion, it was decided that pulling in
wireshark as a dependency is a bit too much for the base 'libvirt'
package.  Remember also that 'libvirt-devel' is also not pulled in
by the base 'libvirt' - the metapackage exists for full
functionality of libvirtd, rather than to pull in all subpackages.
2014-02-13 06:39:19 -07:00
Eric Blake
8d6c3659b8 spec: require libvirt-wireshark from libvirt metapackage
In general, the 'libvirt' metapackage should pull in all subpackages.
Fix this for the wireshark subpackage created in commit f9ada9f.

* libvirt.spec.in (Requires): Add dependency.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-12 13:27:38 -07:00
Thierry Parmentelat
cf76c4b3dd spec: add missing dep of libvirt-daemon-config-network
When building modules, libvirt-daemon-config-network requires
libvirt-daemon-driver-network to ensure the 'default' network
is setup properly

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-12 13:24:01 -07:00
Thierry Parmentelat
902f6148de spec: require libvirt-daemon-driver-interface only when built
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-12 13:14:11 -07:00
Eric Blake
f9ada9f3d0 rpm: create libvirt-wireshark sub-package
On Fedora 20, with wireshark-devel installed, 'make rpm' failed
due to installed but unpackaged files related to wireshark.  As
F20 is already released without wireshark, I chose to add a new
sub-package that is enabled only for F21 and later.  Furthermore,
all existing wireshark plugins belong to the wireshark package,
so I got to invent behavior of how the first third-party wireshark
module will behave.

* libvirt.spec.in (with_wireshark): Add new conditional.
* configure.ac (ws-plugindir): Improve wording.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-05 06:46:00 -07:00
Daniel Veillard
7b84b1673a Release of libvirt-1.2.1
* docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: updated localization from transifex and regenerated
2014-01-16 17:25:58 +08:00
Michal Privoznik
e26cae6b85 examples: Resurrect domsuspend example
This partially reverts 5eb4b04211 and 62774afb6b.

Rewrite the domsuspend example from scratch. This time do it right.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-12-24 17:17:35 +01:00
Laine Stump
a13051b224 specfile: fix make rpm when with_driver_modules is 1
Commit ff76566 moved around things in the specfiles to put
driver-specific files into their appropriate sub-packages (when
with_driver_modules == 1), but accidentally changed things so that the
deamon-driver-network and daemon-config-network files were only
included in a package when with_driver_modules == 0. This broke "make
rpm" on fedora (where with_driver_modules == 1).

This patch follows the pattern (already used for the files in other
sub-modules) of duplicating the files for the main package
(!with_driver_modules) and the sub-package (with_driver_modules).
2013-12-17 14:33:00 +02:00
Daniel P. Berrange
950c2a550f Move examples/domain-events/event-c to examples/object-events
The domain events demo program isn't really tied to domain
events anymore, so rename it to object events.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-12-13 16:07:54 +00:00
Laine Stump
10ba5c4535 Add another missing % on %{_libdir} macro
Signed-off-by: Laine Stump <laine@laine.org>
2013-12-12 15:49:19 +02:00
Daniel P. Berrange
c1e55451f3 Add missing % on %{_libdir} macro in RPM
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-12-12 13:36:03 +00:00
Michael Chapman
81764660ae spec: clean up libvirtd and virtlockd service mgmt
- systemctl and the %systemd_* RPM macros can take multiple unit names
  in the one invocation. Make use of this to avoid repeated systemd
  daemon reloads.

- virtlockd was only properly enabled and disabled when using systemd,
  but when systemd RPM macros were not available (e.g. on Fedora < 18).
  Make sure it's enabled when systemd RPM macros are present, or when
  using initscripts.

- Always use "reload" on virtlockd, not "condrestart". This allows it to
  cleanly re-execute itself without losing running state. Ignore any
  error should the reload fail.

- Move the reloading of virtlockd and libvirtd via their initscripts
  into the daemon package's %postun scriptlet. These services must be
  restarted after all of the libvirt-daemon-driver-* packages have
  been upgraded during the same RPM transaction.

- Add a %triggerpostun executed only when upgrading an older
  libvirt-daemon. As an older package would only reload libvirtd during
  %post, and the newer package would only reload libvirtd during
  %postun, such an upgrade would not reload libvirtd at all without the
  trigger.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2013-12-10 12:02:37 +01:00
Jim Fehlig
ff76566ec0 spec: move driver-specific files to driver subpackages
The libvirt-daemon package contains several driver-specific files,
directories, and script, which can be problematic when building the
package with multiple hypervisor support, e.g. both QEMU and Xen.

E.g. installing a QEMU+Xen enabled libvirt-daemon on a Xen-only system
will result in the creation of qemu and kvm groups and a qemu user.

Move the driver-specific files, directories, and script to the
respective driver subpackages.
2013-12-06 14:00:51 -07:00
Jim Fehlig
2984e26146 spec: Define hypervisor-specific files together
Collapse the various {with_<hypervisor>} conditionals in the
libvirt-daemon package files section into a single {with_<hypervisor>}
conditional
2013-12-06 14:00:51 -07:00
Jim Fehlig
753dcf635d spec: Conditionally specify some hypervisor-specific files
Move some hypervisor-specific files in the libvirt-daemon subpackage
within conditionals for those hypervisors.
2013-12-06 14:00:51 -07:00
Jim Fehlig
b531255b6e spec: Fix files list when building without driver modules
The daemon-config-{network,nwfilter} subpackages are built regardless
of whether or not with_driver_modules is defined, therefore don't
conditionally define their files list.
2013-12-06 14:00:51 -07:00
Jim Fehlig
f422ab05b8 spec: Only add libvirt-daemon pre install script if building with qemu
The %pre script in libvirt-daemon is specific to qemu, so only include
it if building with qemu support.
2013-12-06 14:00:51 -07:00
Jim Fehlig
dc4973f85b spec: Fix unconditional references of nwfilter
Ensure nwfilter files lists and dependencies are conditional upon
with_nwfilter being defined.
2013-12-06 14:00:51 -07:00
Peter Krempa
5eb4b04211 examples: Remove broken bad example
The domsuspend example code is a really old and bad exmample of (how not
to use) the libvirt API. Remove it as it's apparent that nobody tried to
use it. It was broken and nobody complained.
2013-12-04 18:56:06 +01:00
Daniel Veillard
4e41a2a370 Release of libvirt-1.2.0
* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: update and merge localizations from transifex
2013-12-02 12:17:51 +08:00
Eric Blake
318ea3cb77 storage: initial support for linking with libgfapi
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool.  Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents.  This sets up the framework.

Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.

This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested.  A future patch may lower
the minimum.  On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].

[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html

* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-25 11:02:52 -07:00
Daniel P. Berrange
a7a1244a73 Remove python binding
The python binding now lives in

  http://libvirt.org/git/?p=libvirt-python.git

that repo also provides an RPM which is upgrade compatible
with the old libvirt-python sub-RPM.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-11-25 16:08:00 +00:00
Jiri Denemark
604f79b360 spec: Don't save/restore running VMs on libvirt-client update
The previous attempt (commit d65e0e1) removed just one of two
libvirt-guests restarts that happened on libvirt-client update. Let's
remove the last one too :-)

https://bugzilla.redhat.com/show_bug.cgi?id=962225

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2013-11-25 16:50:53 +01:00
Cole Robinson
d65e0e1466 spec: Don't save/restore running VMs on libvirt-client update
Restarting an active libvirt-guests.service is the equivalent of
doing:

/usr/libexec/libvirt-guests.sh stop
/usr/libexec/libvirt-guests.sh start

Which in a default configuration will managedsave every running VM,
and then restore them. Certainly not something we should do every
time the libvirt-client RPM is updated.

Just drop the try-restart attempt, I don't know what purpose it
serves anyways.

https://bugzilla.redhat.com/show_bug.cgi?id=962225
2013-11-22 09:32:18 -05:00
Jiri Denemark
0ee2364319 spec: Restrict virt-login-shell usage
https://bugzilla.redhat.com/show_bug.cgi?id=1033614

As virt-login-shell is an SUID binary, we should restrict its usage to
just the users chosen by an administrator to use virt-login-shell as
their login shell. This can easily be done by making the binary
executable only by users from a new virtlogin group.
2013-11-22 14:57:23 +01:00
Michael Chapman
caaeb691a3 spec: fix libvirt-docs subpackage on RHEL-6
RHEL-6's rpmbuild wipes the docdir for a (sub-)package if any %doc
directives are present, prior to copying in the marked documentation.
This means we can't prepopulate this directory with the HTML
documentation during the %install phase.

Instead, move the HTML documentation to a temporary directory during
%install and mark the contents of this temporary directory with %doc.

This fixes a build regression introduced in

  commit e23216da9a
  Author: Cole Robinson <crobinso@redhat.com>
  Date:   Wed Sep 25 13:20:40 2013 -0400

    spec: Clean up distribution of ChangeLog (and others)

where the libvirt-docs sub-RPM gained a %doc directive, thus
triggering the RPM bug.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2013-11-20 12:58:24 +00:00
Daniel Veillard
a4a7c7e9c4 Release of libvirt-1.1.4
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update localizations from transifex and regenerate
2013-11-04 12:30:41 +08:00
Daniel P. Berrange
23142ac91a Push RPM deps down into libvirt-daemon-driver-XXXX sub-RPMs
For inexplicable reasons, many of the 3rd party package deps
were left against the 'libvirt-daemon' RPM when the drivers
were split out. This makes a minimal install heavier that
it should be. Push them all down into libvirt-daemon-driver-XXX
so they're only pulled in when truly needed

With this change applied, a minimal install of just the
libvirt-daemon-driver-lxc RPM is reduced by 41 MB on a
Fedora 19 host.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-29 14:31:18 +00:00
Daniel P. Berrange
8adc92694f Move virt-login-shell into libvirt-login-shell sub-RPM
Many people will not want the setuid virt-login-shell binary
installed by default, so move it into a separate sub-RPM
named libvirt-login-shell. This RPM is only generated if
LXC is enabled

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-21 14:03:52 +01:00
Daniel Veillard
a72940f954 Release of libvirt-1.1.3
- configure.ac docs/news.html.in libvirt.spec.in: update for release
- po/*.po*: updated localization and regenerated
2013-10-01 15:04:14 +08:00
Cole Robinson
e23216da9a spec: Clean up distribution of ChangeLog (and others)
- Move COPYING* to libvirt-client, so every package pulls them in
- Move AUTHORS ChangeLog.gz NEWS README TODO from -daemon to -docs
- Drop duplicate distribution of docs in -python

https://bugzilla.redhat.com/show_bug.cgi?id=977099
2013-09-25 13:45:36 -04:00
Daniel P. Berrange
922b7fda77 Add support for using 3-arg pkcheck syntax for process (CVE-2013-4311)
With the existing pkcheck (pid, start time) tuple for identifying
the process, there is a race condition, where a process can make
a libvirt RPC call and in another thread exec a setuid application,
causing it to change to effective UID 0. This in turn causes polkit
to do its permission check based on the wrong UID.

To address this, libvirt must get the UID the caller had at time
of connect() (from SO_PEERCRED) and pass a (pid, start time, uid)
triple to the pkcheck program.

This fix requires that libvirt is re-built against a version of
polkit that has the fix for its CVE-2013-4288, so that libvirt
can see 'pkg-config --variable pkcheck_supports_uid polkit-gobject-1'

Signed-off-by: Colin Walters <walters@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-09-18 15:13:42 +01:00
Eric Blake
12509c7999 spec: make client-only testing easier
Several recent patches cleaned up 'make rpm' for the situation
when client_only is true; these were done by manual spec file
editing (since it's relatively hard to come by a RHEL 5 s390
box).  Make it easier to do in the future via a simpler command
line override.

* libvirt.spec.in (client_only): Allow for override.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-05 07:06:36 -06:00
Eric Blake
c021f5cecc spec: default vbox according to libvirtd build
Commit ba5f3c7 moved virtualBox support into libvirtd, but the spec
file was still unconditionally requesting it even when not building
the server side.  Thankfully there were no ill effects for a
client_only build, as most uses of %{with_vbox} were guarded by
%{with_libvirtd}; but we might as well avoid confusion by more
closely matching the makefile.

* libvirt.spec.in (with_vbox): Hoist to server conditionals.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-04 14:55:43 -06:00
Eric Blake
d42906fd00 spec: fix rpm build when lxc disabled
'make rpm' failed if ~/.rpmmacros contains '%_without_lxc 1',
which simulates the case of not having lxc available.

RPM build errors:
    File not found: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/etc/libvirt/virt-login-shell.conf
    File not found by glob: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/usr/share/man/man1/virt-login-shell.1*
    File not found: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/usr/bin/virt-login-shell
make: *** [rpm] Error 1

Reported by Dan Berrange.

* libvirt.spec.in: Mark virt-login-shell as conditional on lxc.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-04 11:30:18 -06:00
Daniel Veillard
85240daba2 Release of libvirt-1.1.2
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: merged new localizations and regenerated
2013-09-02 09:47:37 +08:00
Eric Blake
70363ea9ff build: add configure option to disable gnulib tests
The gnulib testsuite is relatively stable - the only times it is
likely to have a test change from pass to fail is on a gnulib
submodule update or a major system change (such as moving from
Fedora 18 to 19, or other large change to libc).  While it is an
important test for end users on arbitrary machines (to make sure
that the portability glue works for their machine), it mostly
wastes time for development testing (as most developers aren't
making any of the major changes that would cause gnulib tests
to alter behavior).  Thus, it pays to make the tests optional
at configure time, defaulting to off for development, on for
tarballs, with autobuilders requesting it to be on.  It also
helps to allow a make-time override, via VIR_TEST_EXPENSIVE=[01]
(much the way automake sets up V=[01] for overriding the configure
time default of how verbose to be).

Automake has some pretty hard-coded magic with regards to the
TESTS variable; I had quite a job figuring out how to keep
'make distcheck' passing regardless of the configure option
setting in use, while still disabling the tests at runtime
when I did not configure them on and did not use the override
variable.  Thankfully, we require GNU make, which lets me
hide some information from Automake's magic handling of TESTS.

* bootstrap.conf (bootstrap_epilogue): Munge gnulib test variable.
* configure.ac (--enable-expensive-tests): Add new enable switch.
(VIR_TEST_EXPENSIVE_DEFAULT, WITH_EXPENSIVE_TESTS): Set new
witnesses.
* gnulib/tests/Makefile.am (TESTS): Make tests conditional on
configure settings and the VIR_TEST_EXPENSIVE variable.
* tests/Makefile.am (TESTS_ENVIRONMENT): Expose VIR_TEST_EXPENSIVE
to all tests.
* autobuild.sh: Enable all tests during autobuilds.
* libvirt.spec.in (%configure): Likewise.
* mingw-libvirt.spec.in (%mingw_configure): Likewise.
* docs/hacking.html.in: Document the option.
* HACKING: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 10:02:38 -06:00
Eric Blake
6094b1ff19 build: avoid -lgcrypt with newer gnutls
https://bugzilla.redhat.com/show_bug.cgi?id=951637

Newer gnutls uses nettle, rather than gcrypt, which is a lot nicer
regarding initialization.  Yet we were unconditionally initializing
gcrypt even when gnutls wouldn't be using it, and having two crypto
libraries linked into libvirt.so is pointless, but mostly harmless
(it doesn't crash, but does interfere with certification efforts).

There are three distinct version ranges to worry about when
determining which crypto lib gnutls uses, per these gnutls mails:
2.12: http://lists.gnu.org/archive/html/gnutls-devel/2011-03/msg00034.html
3.0: http://lists.gnu.org/archive/html/gnutls-devel/2011-07/msg00035.html

If pkg-config can prove version numbers and/or list the crypto
library used for static linking, we have our proof; if not, it
is safer (even if pointless) to continue to use gcrypt ourselves.

* configure.ac (WITH_GNUTLS): Probe whether to add -lgcrypt, and
define a witness WITH_GNUTLS_GCRYPT.
* src/libvirt.c (virTLSMutexInit, virTLSMutexDestroy)
(virTLSMutexLock, virTLSMutexUnlock, virTLSThreadImpl)
(virGlobalInit): Honor the witness.
* libvirt.spec.in (BuildRequires): Make gcrypt usage conditional,
no longer needed in Fedora 19.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 09:58:48 -06:00
Daniel P. Berrange
38550ae809 Add an example config file for virtlockd
The virtlockd daemon supports an /etc/libvirt/virtlockd.conf
config file, but we never installed a default config, nor
created any augeas scripts. This change addresses that omission.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-09 15:03:04 +01:00
Daniel P. Berrange
6ff0cffd55 Add a man page for virtlockd daemon
Create a virtlockd.pod.in file containing the man page
content for virtlockd.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-09 11:56:34 +01:00
Dan Walsh
54d69f540c Introduce a virt-login-shell binary
Add a virt-login-shell binary that can be set as a user's
shell, such that when they login, it causes them to enter
the LXC container with a name matching their user name.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-08 16:36:31 +01:00
Jiri Denemark
010065d702 spec: Explicitly claim ownership of channel subdir
As both /var/lib/libvirt/qemu and /var/lib/libvirt/qemu/channel/target
are owned by us, the intermediate /var/lib/libvirt/qemu/channel should
be owned by us too.
2013-08-02 17:22:33 +02:00
Daniel P. Berrange
311eae8257 Remove reference to python/tests from RPM %doc
The python/tests files were recently deleted, but a reference was
left in the RPM %doc entry

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-02 16:29:43 +02:00
Jiri Denemark
462863a3ee spec: Don't mix commands with macro definitions
%build section should first define all required macros and then run
commands. Interleaving them makes it harder to spot what commands are
run.
2013-07-30 17:13:40 +02:00
Jiri Denemark
d5cd5bf031 spec: Use --enable-werror on RHEL
As RHEL provides a stable tool chain, we don't have to worry about
frequent changes in reported compiler warnings (which prevents us from
enabling -Werror unconditionally).
2013-07-30 17:05:44 +02:00
Jiri Denemark
a718d28279 spec: RHEL-7 does not have sanlock on i686 2013-07-30 17:05:44 +02:00
Peter Krempa
9c7de20a2b spec: Disable libssh2 support for RHEL
https://bugzilla.redhat.com/show_bug.cgi?id=905513

Libssh2 isn't reliable enough to support the libvirt transport using it.
The problems include mishandling of "known_hosts" files that may confuse
users.
2013-07-30 17:05:43 +02:00
Daniel P. Berrange
6aa5ebbecd Support apparmor in RPM spec
If libapparmor-devel happens to be installed when building the
RPM, it will failed due to unlisted virt-aa-helper in %files.
Add support for apparmor in the spec, so that we can explicitly
turn it on/off, defaulting to off in all distros. This causes
--without-apparmor to be given to configure, preventing the
build failures if the user happens to have libapparmor-devel
present.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-30 14:13:58 +01:00
Jiri Denemark
095ba43903 spec: Cat test-suite.log if make check fails
Current automake enables parallel test by default, which means test
details are only logged in test-suite.log and not printed to stderr.
This patch makes test failures directly visible in RPM build logs even
when parallel tests are turned on.
2013-07-29 18:14:02 +02:00
Cole Robinson
3347a42032 python: Drop TODO
File hasn't been really touched for 7 years. And with recent rawhide
changes it contributed to an RPM build failure. Let's drop it.

This also removes installation of a libvirt-python doc dir, so drop
handling of it from the RPM spec.
2013-07-29 07:54:18 -04:00
Daniel Veillard
034d322978 Release of libvirt-1.1.0
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: updated localizations and regenerated
2013-07-01 17:22:49 +08:00
Eric Blake
3a214482ec spec: require xen-devel for libxl driver
When using 'rpmbuild --define "_without_xen 1"', but on a new enough
Fedora where %{with_libxl} still gets set to 1 by default, the
build dependencies were incomplete, which could result in 'make rpm'
failing because ./configure failed to build the libxl driver.

* libvirt.spec.in (BuildRequires): Fix xen-devel condition.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-06-29 14:56:05 -06:00
Daniel Veillard
0c737dfb44 Add polkit policy for API checks to rpm spec 2013-06-25 13:44:47 +02:00
Ján Tomko
31d42506fb conf: add features to volume target XML
Add <features> and <compat> elements to volume target XML.

<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.

<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
2013-06-21 13:25:30 +02:00
Cole Robinson
ce672cde62 spec: Enable KVM support on ARM
F20/rawhide has support for this.

From: Peter Robinson <pbrobinson@gmail.com>
2013-06-18 07:33:23 -04:00
Cole Robinson
db459dbdb9 spec: Drop Requires: vbox
Since this package isn't provided by any stock RH based distro. The
upstream RPMs are called VirtualBox anyways.
2013-06-08 18:32:59 -04:00
Jiri Denemark
3b50a711f0 spec: Explicitly require libgcrypt-devel
Our configure.ac says:

    Not all versions of gnutls include -lgcrypt, and so we add
    it explicitly for the calls to gcry_control/check_version

Thus we cannot rely on gnutls-devel to bring grcypt-devel as a
dependency.
2013-06-03 15:15:44 +02:00
Daniel Veillard
4497ef50dc Release of libvirt 1.0.6
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: pull localization updates and regenerate the po
2013-06-03 12:09:56 +02:00
Viktor Mihajlovski
831909a94e spec: Build vbox packages only for x86 architectures
Commit 6ab6bc19f0 has introduced separate
daemon/driver packages for vbox. These should only be built for x86
architectures which is done hereby.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-05-24 10:11:00 -06:00
Eric Blake
de483052a2 maint: follow recommended practice for using LGPL
https://www.gnu.org/licenses/gpl-howto.html states:

You should also include a copy of the license itself somewhere in the
distribution of your program. All programs, whether they are released
under the GPL or LGPL, should include the text version of the GPL. In
GNU programs the license is usually in a file called COPYING.

If you are releasing your program under the LGPL, you should also
include the text version of the LGPL, usually in a file called
COPYING.LESSER. Please note that, since the LGPL is a set of
additional permissions on top of the GPL, it's important to include
both licenses so users have all the materials they need to understand
their rights.

* configure.ac (COPYING): No more games with non-git file.
* COPYING: New file, copied from gnulib.
* COPYING.LIB: Rename...
* COPYING.LESSER: ...to this.
* .gitignore: Track licenses in git.
* cfg.mk (exclude_file_name_regexp--sc_copyright_address): Tweak
rule.
* libvirt.spec.in (daemon, client, python): Reflect rename.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-20 14:15:21 -06:00
Daniel P. Berrange
6ab6bc19f0 Add libvirt-daemon-vbox & libvirt-daemon-driver-vbox RPMs
Now the VirtualBox driver is a loadable module, it needs
to live in its own sub-RPM

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-17 17:09:29 +01:00
Eric Blake
9615ca59c6 spec: fix outdated comment
https://bugzilla.redhat.com/show_bug.cgi?id=963016 points out that
we don't use initscripts by default on Fedora any more.

* libvirt.spec.in (Requires): Better explanation of gettext.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-14 21:07:40 -06:00
Eric Blake
a2584d58f6 spec: proper soft static allocation of qemu uid
https://bugzilla.redhat.com/show_bug.cgi?id=924501 tracks a
problem that occurs if uid 107 is already in use at the time
libvirt is first installed.  In response that problem, Fedora
packaging guidelines were recently updated.  This fixes the
spec file to comply with the new guidelines:
https://fedoraproject.org/wiki/Packaging:UsersAndGroups

* libvirt.spec.in (daemon): Follow updated Fedora guidelines.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-06 14:05:05 -06:00
Laine Stump
9eafa25116 build: fix make rpm failure
Commit 297c99a accidentally put a { where a ( belonged, causing make
rpm to fail.
2013-05-03 07:52:22 -04:00
Michal Privoznik
297c99a567 qemu: Generate agent socket path if missing
It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:

$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name

for qemu system mode, and

$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name

for qemu session mode.
2013-05-02 16:40:24 +02:00
Daniel Veillard
8e20a23fb6 Release of libvirt-1.0.5
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: pulled and merged a number of new localization updates
2013-05-02 15:04:50 +08:00
Eric Blake
e2472e6957 spec: collect all BuildRequires into one area
Conditional BuildRequires: should be at the top level, rather
than appearing in conditional sub-package sections.  This
appears to be the only offender.

* libvirt.spec.in (BuildRequires): Move libblkid-devel into
correct area.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-01 20:55:59 -06:00
Jiri Denemark
6f1b9c8d2a spec: Require pod2man when running autoreconf
Since commit b8a32e0e94, all man pages
depend on configure.ac so that they are properly regenerated whenever
libvirt version changes. Thus libvirt.spec needs to have a build
dependency on pod2man when %{enable_autotools} is set.
2013-04-08 16:11:16 +02:00
Michal Privoznik
5e5ca84e31 test: Return Libvirt logo as domain screenshot
This is just a bare Easter Egg. Whenever a user runs virDomainScreenshot
over a domain in test driver, he'll get the Libvirt PNG logo in return.
2013-04-02 14:38:56 +02:00
Daniel Veillard
89d730201f Release of libvirt-1.0.4
- configure.ac docs/news.html.in libvirt.spec.in: updates for the release
- po/*.po*: fetch translation updates from Transifex and regenerate
2013-04-01 10:57:04 +08:00
Daniel Veillard
be1c364d89 Release of libvirt 1.0.3
- configure.ac docs/news.html.in libvirt.spec.in: update for the release
- po/*.po*: merged in transifex updates for fr,hi,pl,ja,uk,it and
  regenerated
2013-03-05 12:00:53 +08:00
Jiri Denemark
53657a0abe spec: Fix minor changelog issues
When a changelog entry references an RPM macro, % needs to be escaped so
that it does not appear expanded in package changelog.

Fri Mar  4 2009 is incorrect since Mar 4 was Wednesday. Since
libvirt-0.6.1 was released on Mar 4 2009, we should change Fri to Wed.
2013-02-05 10:00:32 +01:00
Jiri Denemark
d45066a55f spec: Avoid using makeinstall relic
The macro was made to help installing broken packages that did not use
DESTDIR correctly by overriding individual path variables (prefix,
sysconfdir, ...). Newer rpm provides fixed make_install macro that calls
make install with just the correct DESTDIR, however it is not available
everywhere (e.g., RHEL 5 does not have it). On the other hand the
make_install macro is simple and straightforward enough for us to use
its expansion directly.
2013-01-31 16:53:19 +01:00
Daniel Veillard
4a824cdbc4 Release of libvirt-1.0.2
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated localizations
2013-01-30 10:42:05 +01:00
Eric Blake
c8f79c9b29 spec: indent %if to make it easier to see conditions
Nested conditionals are hard to read if they are not indented.
We can't add arbitrary whitespace to everything in spec files,
but we CAN add spaces before %if and %define.  Use this trick,
plus a fancy sed script that rewrites a spec file into a C
file, so we can use cppi to keep our spec file nice.

For reference, the sed script converts code like:

|# RHEL-5 builds are client-only for s390, ppc
|%if 0%{?rhel} == 5
|    %ifnarch %{ix86} x86_64 ia64
|        %define client_only        1
|    %endif
|%endif

into the following for cppi:

|// # RHEL-5 builds are client-only for s390, ppc
|#if a // 0%{?rhel} == 5
|# if a // %{ix86} x86_64 ia64
|#  define client_only        1
|# endif
|#endif

and errors from 'make syntax-check' look like:
spec_indentation
cppi: mingw-libvirt.spec.in: line 130: not properly indented
maint.mk: incorrect preprocessor indentation

* libvirt.spec.in: Add some indentation to make it easier to follow
various conditionals.
* mingw-libvirt-spec.in: Likewise.
* cfg.mk (sc_spec_indentation): New syntax check to enforce it.
2013-01-21 10:36:14 -07:00
Viktor Mihajlovski
8691551070 build: Fix RPM build errors related to libvirt-lxc API
Added missing entries to makefile and spec.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-01-18 09:48:17 -07:00
Daniel P. Berrange
3d1596b048 Introduce an LXC specific public API & library
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.

The actual APIs are

  int virDomainLxcOpenNamespace(virDomainPtr domain,
                                int **fdlist,
                                unsigned int flags);

  int virDomainLxcEnterNamespace(virDomainPtr domain,
                                 unsigned int nfdlist,
                                 int *fdlist,
                                 unsigned int *noldfdlist,
                                 int **oldfdlist,
                                 unsigned int flags);

which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.

NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:58:34 +00:00
Daniel P. Berrange
907a39e735 Add a test suite for validating SELinux labelling
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:40:04 +00:00
Daniel P. Berrange
0eec69729d Convert ssh2 check to use LIBVIRT_CHECK_PKG
This converts the libssh2 configure check to use LIBVIRT_CHECK_PKG.
Previously it would check version 1.0 and 1.3, but this simplifies
things to just require version 1.3
2013-01-14 13:29:44 +00:00
Yufang Zhang
8a883b0c1e build: require avahi instead of avahi-libs on rhel5.
On rhel5, libs of avahi are packaged into avahi instead of avahi-libs.
Actually, there is no avahi-libs package shipped with rhel5. This patch
fixes this by requiring avahi on rhel5.
2013-01-10 17:16:21 -07:00
Eric Blake
86007cba4c spec: remove redundant %if
The daemon-driver-{qemu,lxc} packages are only built if
%{with_driver_modules} is specified, so they do not need to
further test this condition.  Likewise, the daemon package
is only built if %{with_libvirtd} is specified, so it does
not need to further test this condition.

* libvirt.spec.in (daemon-driver-qemu, daemon-driver-lxc):
Unconditionally require libvirt-daemon-driver-network.
(daemon): Unconditionally include lock-driver files.
2013-01-10 14:07:30 -07:00
Yufang Zhang
daef7c9e9c build: move file deleting action from %files list to %install
When building libvirt rpms on rhel5, I got the following error:

    File must begin with "/": rm
    File must begin with "/": -f
    File must begin with "/": $RPM_BUILD_ROOT/etc/sysctl.d/libvirtd
    Installed (but unpackaged) file(s) found:
   /etc/sysctl.d/libvirtd

It is triggerd by the %files list of libvirt daemon:

    %if 0%{?fedora} >= 14 || 0%{?rhel} >= 6
    %config(noreplace) %{_prefix}/lib/sysctl.d/libvirtd.conf
    %else
    rm -f $RPM_BUILD_ROOT%{_prefix}/lib/sysctl.d/libvirtd.conf
    %endif

After checking document of rpm spec file, I think it would be better
to move the file deleting line from %files list to %install script.

Bug introduced in commit a1fd56c.
2013-01-09 17:16:42 -07:00
Viktor Mihajlovski
b7159dca8b build: libvirt-guests files misplaced in specfile
In a non-systemd environment the post and preun scripts of libvirt-client
fail, since the required files are in libvirt-daemon. Moved them to client.
Doing that I noticed %{_unitdir}/libvirt-guests.service was contained in
both libvirt-client and libvirt-daemon, which I don't think was intended.
Removed the extra copy from daemon.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-01-08 09:53:42 -07:00
Eric Blake
a1fd56cb30 build: install libvirt sysctl file correctly
https://bugzilla.redhat.com/show_bug.cgi?id=887017 reports that
even though libvirt attempts to set fs.aio-max-nr via sysctl,
the file was installed with the wrong name and gets ignored by
sysctl.  Furthermore, 'man systcl.d' recommends that packages
install into hard-coded /usr/lib/sysctl.d (even when libdir is
/usr/lib64), so that sysadmins can use /etc/sysctl.d for overrides.

* daemon/Makefile.am (install-sysctl, uninstall-sysctl): Use
correct location.
* libvirt.spec.in (network_files): Reflect this.
2013-01-07 08:56:37 -07:00
Jiri Denemark
5cce9d28b0 spec: Do not install *.py[co] in python examples
Unfortunately, rpm is stupid enough to bytycompile python scripts even
though they are located in /usr/share/doc/libvirt-python-*/examples and
it does so after %install phase is finished. Thus there's no way we
could remove those files from BUILDROOT. As a workaround, we may safely
remove the examples subdirectory completely without losing anything. The
python scripts that were installed there are also copied directly into
/usr/share/doc/libvirt-python-*/ by

    %doc python/tests/*.py

rule. And yes, the files are actually tests, not examples.
2012-12-18 18:03:31 +01:00
Cole Robinson
d60c7f75c2 spec: Fix script warning when uninstalling libvirt-client
https://bugzilla.redhat.com/show_bug.cgi?id=888071
2012-12-18 10:21:17 -05:00
Jiri Denemark
b4f20d07e2 spec: Include lockd files in libvirt-daemon package 2012-12-14 11:59:37 +01:00
Daniel P. Berrange
f234dc9366 Add support for re-exec() of virtlockd upon SIGUSR1
The virtlockd daemon maintains file locks on behalf of libvirtd
and any VMs it is running. These file locks must be held for as
long as any VM is running. If virtlockd itself ever quits, then
it is expected that a node would be fenced/rebooted. Thus to
allow for software upgrads on live systemd, virtlockd needs the
ability to re-exec() itself.

Upon receipt of SIGUSR1, virtlockd will save its current live
state out to a file /var/run/virtlockd-restart-exec.json
It then re-exec()'s itself with exactly the same argv as it
originally had, and loads the state file, reconstructing any
objects as appropriate.

The state file contains information about all locks held and
all network services and clients currently active. An example
state document is

 {
    "server": {
        "min_workers": 1,
        "max_workers": 20,
        "priority_workers": 0,
        "max_clients": 20,
        "keepaliveInterval": 4294967295,
        "keepaliveCount": 0,
        "keepaliveRequired": false,
        "services": [
            {
                "auth": 0,
                "readonly": false,
                "nrequests_client_max": 1,
                "socks": [
                    {
                        "fd": 6,
                        "errfd": -1,
                        "pid": 0,
                        "isClient": false
                    }
                ]
            }
        ],
        "clients": [
            {
                "auth": 0,
                "readonly": false,
                "nrequests_max": 1,
                "sock": {
                    "fd": 9,
                    "errfd": -1,
                    "pid": 0,
                    "isClient": true
                },
                "privateData": {
                    "restricted": true,
                    "ownerPid": 1722,
                    "ownerId": 6,
                    "ownerName": "f18x86_64",
                    "ownerUUID": "97586ba9-df27-9459-c806-f016c8bbd224"
                }
            },
            {
                "auth": 0,
                "readonly": false,
                "nrequests_max": 1,
                "sock": {
                    "fd": 10,
                    "errfd": -1,
                    "pid": 0,
                    "isClient": true
                },
                "privateData": {
                    "restricted": true,
                    "ownerPid": 1784,
                    "ownerId": 7,
                    "ownerName": "f16x86_64",
                    "ownerUUID": "7b8e5e42-b875-61e9-b981-91ad8fa46979"
                }
            }
        ]
    },
    "defaultLockspace": {
        "resources": [
            {
                "name": "/var/lib/libvirt/images/f16x86_64.raw",
                "path": "/var/lib/libvirt/images/f16x86_64.raw",
                "fd": 14,
                "lockHeld": true,
                "flags": 0,
                "owners": [
                    1784
                ]
            },
            {
                "name": "/var/lib/libvirt/images/shared.img",
                "path": "/var/lib/libvirt/images/shared.img",
                "fd": 12,
                "lockHeld": true,
                "flags": 1,
                "owners": [
                    1722,
                    1784
                ]
            },
            {
                "name": "/var/lib/libvirt/images/f18x86_64.img",
                "path": "/var/lib/libvirt/images/f18x86_64.img",
                "fd": 11,
                "lockHeld": true,
                "flags": 0,
                "owners": [
                    1722
                ]
            }
        ]
    },
    "lockspaces": [

    ],
    "magic": "30199"
 }

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-13 15:26:57 +00:00
Daniel P. Berrange
74c0353e4f Enable systemd socket activation with virtlockd
This enhancement virtlockd so that it can receive a pre-opened
UNIX domain socket from systemd at launch time, and adds the
systemd service/socket unit files

* daemon/libvirtd.service.in: Require virtlockd to be running
* libvirt.spec.in: Add virtlockd systemd files
* src/Makefile.am: Install systemd files
* src/locking/lock_daemon.c: Support socket activation
* src/locking/virtlockd.service.in, src/locking/virtlockd.socket.in:
  systemd unit files
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h:
  Add virNetServerServiceNewFD() method
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add virNetSocketNewListenFD
  method

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-13 15:26:57 +00:00
Daniel P. Berrange
c57e3d8994 Introduce basic infrastructure for virtlockd daemon
The virtlockd daemon will maintain locks on behalf of libvirtd.
There are two reasons for it to be separate

 - Avoid risk of other libvirtd threads accidentally
   releasing fcntl() locks by opening + closing a file
   that is locked
 - Ensure locks can be preserved across libvirtd restarts.
   virtlockd will need to be able to re-exec itself while
   maintaining locks. This is simpler to achieve if its
   sole job is maintaining locks

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-13 15:26:57 +00:00
Cole Robinson
d13155c20c tools: Only install guests init script if --with-init=script=redhat
Most of this deals with moving the libvirt-guests.sh script which
does all the work to /usr/libexec, so it can be shared by both
systemd and traditional init. Previously systemd depended on
the script being in /etc/init.d

Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747
2012-12-11 19:54:37 -05:00
Jim Fehlig
dfa1e1dd53 Convert libxl driver to Xen 4.2
Based on a patch originally authored by Daniel De Graaf

  http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html

This patch converts the Xen libxl driver to support only Xen >= 4.2.
Support for Xen 4.1 libxl is dropped since that version of libxl is
designated 'technology preview' only and is incompatible with Xen 4.2
libxl.  Additionally, the default toolstack in Xen 4.1 is still xend,
for which libvirt has a stable, functional driver.
2012-12-06 16:15:54 -07:00
Eric Blake
2edbd3d918 spec: require dbus-daemon when using libvirtd in Fedora
https://bugzilla.redhat.com/show_bug.cgi?id=830201

In older Fedora, the spec file for libivrt depended on avahi, which
included avahi-daemon, which in turn depended on dbus.  But now that
avahi libs and avahi-daemon are (correctly) in separate pacakges,
and since we REALLY don't want a mandatory dependency on avahi-daemon,
and considering that our init scripts require the messagebus service
from dbus, we need to explicitly require dbus ourselves.

* libvirt.spec.in (Requires): Add dbus for libvirt-daemon.
2012-12-05 16:13:12 +08:00
Bamvor Jian Zhang
501bfad194 implement managedsave in libvirt xen legacy driver
Implement the domainManagedSave, domainHasManagedSaveImage, and
domainManagedSaveRemove functions in the libvirt legacy xen driver.

domainHasManagedSaveImage check the managedsave image from filesystem
everytime. This is different from qemu and libxl driver. In qemu or
libxl driver, there is a hasManagesSave flag in virDomainObjPtr which
is not used in xen legacy driver. This flag could not add into xen
driver ptr either, because the driver ptr will be released at the end of
every libvirt api call. Meanwhile, AFAIK, xen store all the flags in
xen not in libvirt xen driver. There is no need to add this flag in xen.

Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
2012-12-04 09:59:23 -07:00
Gao feng
b6c37e5fb5 Add a configure option for fuse support in LXC driver
Add a configure option --with-fuse to prepare introduction
of fuse support for libvirt lxc.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2012-11-28 10:28:49 +00:00
Dan Horák
041b1ff26a add ppc64 and s390x to arches where qemu-kvm exists
QEMU in Fedora >= 18 is configured with ppc64 and s390x as architectures
where KVM is enabled.

https://bugzilla.redhat.com/show_bug.cgi?id=872545
2012-11-16 11:04:43 -07:00
Václav Pavlín
ec02d49dfd spec: replace scriptlets with new systemd macros
https://bugzilla.redhat.com/850186

I added %with_systemd_macros so it should now work in F17 with old
scriptlets and in F18+/RHEL7+ with systemd macros
(see https://fedoraproject.org/wiki/Packaging:ScriptletSnippets#Systemd)

I missed libvirt-guests.service because there is no systemctl call for
it. So I only added systemd macros calls.
2012-11-05 14:30:56 -07:00
Eric Blake
b61eadf3c6 spec: don't enable cgconfig under systemd
In Fedora 16, we quit enabling cgconfig because systemd set up
default cgroups that were good enough for our use.  But in F17,
when we switched to systemd, we reverted and started up cgconfig
again.  See also the tail of this thread:
https://www.redhat.com/archives/libvir-list/2012-October/msg01657.html

* libvirt.spec.in (with_systemd): Rely on systemd for cgroups.
2012-11-05 10:27:02 -07:00
Daniel Veillard
2b435c153e Release of libvirt-1.0.0
* configure.ac docs/news.html.in libvirt.spec.in: update for the new release
* po/*.po*: update from transifex, a lot of added support e.g. Indian
  languages, and regenerate
2012-11-02 12:08:11 +08:00
Viktor Mihajlovski
eb0b42d80a build: Fix RPM build for non-x86 platforms
Make the post install script for the lock-sanlock package optional
to prevent break on non-x86 platforms.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-10-31 20:45:12 -06:00
Michal Privoznik
9af1b30da3 sanlock: Introduce 'user' and 'group' conf variables
through which user set under what permissions does sanlock
daemon run so libvirt will set the same permissions for
files exposed to it.
2012-10-30 10:12:10 +01:00
Cole Robinson
18d0632dc7 spec: Fix multilib issue with systemtap tapsets
If building on a 64bit host, rename the affected tapsets to <name>-64.stp.
This is similar to what the python package does in fedora.

https://bugzilla.redhat.com/show_bug.cgi?id=831425
2012-10-22 16:15:12 -04:00
Jiri Denemark
54b8668b4d spec: Fix dependency for lock-sanlock subpackage
This should not make a big difference in real world since libvirt-daemon,
which is already required by libvirt-lock-sanlock, requires
libvirt-client and thus libvirt-lock-sanlock gets this dependency
transitively. However, since libvirt-lock-sanlock contains
sanlock_helper binary linked to libvirt.so, we should start requiring
libvirt-client directly.
2012-10-18 14:23:24 +02:00
Jiri Denemark
3143c81ca1 spec: Require newer sanlock on recent distros 2
The previous commit was incomplete. We need to also add explicit
Requires for the newer version since RPM's automatic dependencies won't
work with sanlock.
2012-10-17 00:00:47 +02:00
Peter Krempa
cb4f41b8d0 spec: Add runtime requirement for libssh2
libssh2 unfortunately doesn't support symbol versioning so RPM can't
figure out what version is needed for the currently installed libvirt
package. This patch adds a runtime requirement, so that the correct
version of libssh2 can be installed along with libvirt.
2012-10-16 22:47:04 +02:00
Jiri Denemark
48bf62fde1 spec: Require newer sanlock on recent distros
Make sure libvirt is build with sanlock >= 2.4 on distros that are new
enough to provide it.
2012-10-16 21:32:07 +02:00
Peter Krempa
1e25c54f66 spec: Add support for libssh2 transport
Libssh2 transport support was enabled lately but the spec file wasn't
updated to take this into account. This caused libvirt to be built
without libssh2 support in Red Hat based OSes.
2012-10-12 23:36:11 +02:00
Jiri Denemark
893647671b locking: Implement lock failure action in sanlock driver
While the changes to sanlock driver should be stable, the actual
implementation of sanlock_helper is supposed to be replaced in the
future. However, before we can implement a better sanlock_helper, we
need an administrative interface to libvirtd so that the helper can just
pass a "leases lost" event to the particular libvirt driver and
everything else will be taken care of internally. This approach will
also allow libvirt to pass such event to applications and use
appropriate reasons when changing domain states.

The temporary implementation handles all actions directly by calling
appropriate libvirt APIs (which among other things means that it needs
to know the credentials required to connect to libvirtd).
2012-10-11 14:41:42 +02:00
Eric Blake
a9087ad16d spec: prefer canonical name of util-linux
I noticed that in two places, we require util-linux, and in a third,
we require util-linux-ng.  On Fedora (I tested F15 through rawhide),
util-linux-ng is obsoleted by util-linux; on RHEL 6, util-linux
is obsoleted by util-linux-ng.  That is, on either platform, either
name will get you the correct package installed (where the preferred
name on fedora is util-linux, and on RHEL 6 is util-linux-ng).  But
on RHEL 5, there is no util-linux-ng

* libvirt.spec.in (Requires): Use util-linux, not util-linux-ng.
2012-10-05 06:31:05 -06:00
Daniel Veillard
f8fbeb50d5 Release of libvirt-0.10.2
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update from transifex and regenerate
2012-09-24 12:46:37 +08:00
Daniel Veillard
72c1632d90 Fix another rpmbuild failure
without systemd we should not try to package the non-installed
%{_sysconfdir}/rc.d/init.d/libvirtd
2012-09-24 12:46:37 +08:00
Daniel Veillard
35616d6e7e Fix an rpmbuild failure
$RPM_BUILD_ROOT was embedded in /etc/rc.d/init.d/libvirt-guests
2012-09-24 12:37:52 +08:00
Daniel P. Berrange
49e5abb6a6 Don't install legacy initscripts at same time as systemd ones
The Fedora policies don't want us installing the legacy initscripts
in parallel with the systemd ones, so switch to only install the
systemd unit

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-24 10:50:16 +08:00
Doug Goldstein
b95ad92e05 build: define WITH_INTERFACE for the driver
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.

Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.

* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
2012-09-19 08:27:01 -06:00
Daniel P. Berrange
3f685c4dd8 Fix RPM spec conditional when %{rhel} is not defined 2012-09-07 16:45:50 +01:00
Daniel P. Berrange
bd172f1345 Fix location of SELinux mount during RPM builds
When building RPMs the host kernel cannot be assumed to match
the target OS kernel. Thus auto-detecting /selinux vs
/sys/fs/selinux based on the host kernel can result in the
wrong choice (eg F18 builds on a RHEL6 host kernel)

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-07 13:31:00 +01:00
Laine Stump
89810fc423 build: require netcf-0.2.2 when installing on Fedora18+
A previous patch forced libnl-3 and netcf-0.2.2 (which itself requires
libnl-3) when *building* for Fedora 18+ (and RHEL 7+), but the
install-time Requires: for netcf has always been implicit due to
libvirtd linking with libnetcf.so. However, the since the API of netcf
didn't change when it was rebuilt to use libnl-3, the internal library
version didn't change either, making it possible (from rpm's point of
view) to upgrade libvirt without upgrading netcf (in reality, that
leads to a segfault - see
https://bugzilla.redhat.com/show_bug.cgi?id=853381).

The solution is to put an explicit Requires: line in libvirt's
specfile for fedora >= 18 and rhel >= 7.
2012-09-05 14:35:04 -04:00
Daniel P. Berrange
8386b304b0 Remove explicit dependency on ceph RPM
The libvirt storage driver uses librbd.so for its functionality.
RPM will automatically add a dependency on the library, so there
is no need to have an explicit dependency on the ceph RPM itself.
This allows newer Fedora distros to avoid pulling in the huge
ceph RPM, in favour of just having the libraries installed
2012-09-05 10:49:38 +01:00
Daniel Veillard
383a41657f Release of libvirt-0.10.1
* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: pulled localization updates for sp,ja,mr,pa,uk,zh_CN,zh_TW
  and regenerated
2012-08-31 20:41:06 +08:00
Daniel Veillard
6540efa40d Release of libvirt-0.10.0
* configure.ac docs/news.html.in libvirt.spec.in: updates for the release
* po/*.po*: update localizations for zh_CN, uk, ja, pt_BR, as, sp, mr, zh_TW
2012-08-29 12:00:36 +08:00
Laine Stump
e9aaf806f1 specfile: require libnl3 for Fedora >= 18 and RHEL >= 7
Everything is ready in both netcf and libvirt to switch over to libnl3
in future releases of both Fedora and RHEL. This needs to be done more
or less simultaneously in both packages, though, because you can't mix
libnl1.1 and libnl3 in the same process (e.g. libvirtd using
libnl-3.so and libnetcf.so, while libnetcf.so uses libnl.so)

This patch does two things when fedora >= 18 || rhel >= 7):

  1) requires libnl3-devel
  2) requires netcf-devel-0.2.2 or greater

(the idea is that a similar patch is going into netcf's specfile, so
that when a build of netcf is done on F18 or later (or RHEL7 or later)
netcf will be guaranteed to be built with libnl3 rather than
libnl-1.1)
2012-08-27 10:18:25 +08:00
Daniel Veillard
05a66695be Fix a missing build requirement on dbus-devel
Communication with the firewall daemon uses DBus
so if we compile with firewalld support, the dbus-devel
is required for building
2012-08-23 17:44:08 +08:00
Thomas Woerner
bf156385a0 network: use firewalld instead of iptables, when available
* configure.ac, spec file: firewalld defaults to enabled if dbus is
  available, otherwise is disabled. If --with_firewalld is explicitly
  requested and dbus is not available, configure will fail.

* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
  signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
  When these are encountered, reload all the iptables reuls of all
  libvirt's virtual networks (similar to what happens when libvirtd is
  restarted).

* iptables, ebtables: use firewall-cmd's direct passthrough interface
  when available, otherwise use iptables and ebtables commands. This
  decision is made once the first time libvirt calls
  iptables/ebtables, and that decision is maintained for the life of
  libvirtd.

* Note that the nwfilter part of this patch was separated out into
  another patch by Stefan in V2, so that needs to be revised and
  re-reviewed as well.

================

All the configure.ac and specfile changes are unchanged from Thomas'
V3.

V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient.  V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.

The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.

IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.

This one-time initialization works well. However, I've encountered
problems with testing:

1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)

2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).

3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.

4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.
2012-08-21 13:40:58 -04:00
Jiri Denemark
1371cc5251 spec: Remove extra () with return statement 2012-08-01 13:09:57 +02:00
Daniel Veillard
27df13f483 Fix rpm build failures
The 'make check' was rebuilding the binaries just overrided,
so for more safety also override the C program
Also daemon-conf isn't built anymore so remove it from the list
2012-08-01 16:10:36 +08:00
Dmitry Guryanov
cafc26ff5f parallels: add driver skeleton
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.

More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-08-01 11:44:26 +08:00
Wen Congyang
95738b3f0d building: fix deps error when some drivers are not built
libvirt-daemon-driver-XXX should be a dependency only when with_driver_modules
is 1.
libvirt-daemon-driver-libxl should be a dependency only when with_libxl is 1.
libvirt-daemon-driver-lxc should be a dependency only when with_lxc is 1.
libvirt-daemon-driver-qemu should be a dependency only when with_qemu is 1.
libvirt-daemon-driver-uml should be a dependency only when with_uml is 1.
libvirt-daemon-driver-xen should be a dependency only when with_xen is 1.
2012-07-24 20:41:05 +08:00
Daniel P. Berrange
678da4a57c Add missing deps on driver modules in libvirt RPM
Turning on the building of driver modules in libvirt.spec.in
means that installing 'libvirt' no longer pulls in all the
drivers. For upgrade compatibility we need to list all drivers
module sub-RPMs against the 'libvirt' RPM.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-19 10:18:26 +01:00
Sebastian Wiedenroth
29bc4fe646 Add a sheepdog backend for the storage driver
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.

Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
2012-07-18 20:08:27 +01:00
Daniel Veillard
3a4d9d1ed3 Release of libvirt-0.9.13
* configure.ac docs/news.html.in libvirt.spec.in: new version and
  documentation update
* po/*.po*: updated and regenerated localizations
2012-07-02 11:25:36 +08:00
Daniel P. Berrange
48939a4aba Fix typo in RPM specfile
libvirt.spec.in: s/{?rhel}/%{?rhel}/
2012-06-12 15:54:56 +01:00
Daniel P. Berrange
1cdbe4d22a Two RPM conditional fixes for RHEL-7
Ensure systemd is used in RHEL-7 and cgconfig is not used in
RHEL-7
2012-06-11 18:07:20 +01:00
Cole Robinson
dd7bc51bc4 spec: Build against systemd for udev
They have now merged. Fedora details here:

https://lists.fedoraproject.org/pipermail/devel/2012-June/168227.html
2012-06-06 16:53:36 -04:00
Martin Kletzander
730cc8d783 Fixes for check and rpm builds without sanlock (and qemu)
Apart from the non-sanlock check build, there is also a little fix for
qemu (EXTRA_DIST had qemu.conf and others inside even if the build was
supposed to be without qemu).
2012-05-30 18:57:50 +02:00
Daniel P. Berrange
83fe3d22e2 Fix typos in RPM dependencies
s/daemon-driver-nwilter/daemon-driver-nwfilter/
s/daemon-network/daemon-driver-network/

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-28 10:53:54 +01:00
Wen Congyang
81e9e7cf3b fix building error on non fedora system
We forget to define with_storage_rbd if the system is not fedora,
or the version is less than 16.
2012-05-24 21:11:58 +08:00
Daniel P. Berrange
b3cf13bb2f Enable driver modules in libvirt RPM
Turn on loadable modules for libvirtd. Add new sub-RPMs
libvirt-daemon-driver-XXX, one for each loadable .so.
Modify the libvirt-daemon-YYY RPMs to depend on each of
the individual drivers they required

* libvirt.spec.in: Enable driver modules

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-24 13:18:01 +01:00
Daniel P. Berrange
aad1625da6 Fix dep from libvirt-lock-sanlock RPM
The libvirt-lock-sanlock RPM requires libvirtd, so its RPM dep
should be on libvirt-daemon, not libvirt
2012-05-24 13:18:00 +01:00
Wido den Hollander
74951eadef storage backend: Add RBD (RADOS Block Device) support
This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-05-21 12:37:38 -06:00
Daniel P. Berrange
3247b63ba9 Add bundled(gnulib) to RPM specfile
According to Fedora guidelines, because we bundle gnulib we
need to add a virtual Provides: bundled(gnulib).

https://fedoraproject.org/wiki/Packaging:No_Bundled_Libraries#Requirement_if_you_bundle
2012-05-15 16:25:30 +01:00
Daniel Veillard
a25d5cfd80 Release of libvirt-0.9.12
* configure.ac docs/news.html.in libvirt.spec.in: updates for the release
* po/*.po: pushed new sources and synchronized new languages translations
2012-05-14 10:52:04 +08:00
Osier Yang
b736e72255 numad: Update comments in libvirt.spec.in
Not only support CPU placement now.
2012-05-09 13:12:38 +08:00
Cole Robinson
f4345ac21f rpm: Handle different source URLs for maint releases 2012-05-07 10:50:53 -04:00
Daniel P. Berrange
cf2ed25c9a Fix initial hypervisor conditionals
The openvz, virtualbox and vmware drivers do not run inside
libvirtd, therefore they should be grouped with the other
client side drivers
2012-04-04 10:54:20 +01:00
Daniel P. Berrange
899bf6680a Remove bogus xen-devel dep from libvirt-devel RPM
The public libvirt API does not have any application visible
dependency on Xen libraries. The xen-devel dependency is thus
bogus
2012-04-04 10:54:10 +01:00
Daniel P. Berrange
726e391d37 Introduce per-hypervisor virtual RPMs
Introduce a set sub-RPMs, one per hypervisor, which can be used
as dependency targets by applications wishing to pull in the
full stack of packages required for a specific hypervisor. This
avoids the application needing to know what the hypervisor specific
package set is.

ie, applications should not need to know that using the libvirt
Xen hypervisor requires the 'xen' RPM - libvirt should take care
of that knowledge. All the application wants is 'libvirt-daemon-xen'

There are 5 sub-RPMs:

  libvirt-daemon-qemu - non-native TCG based emulators
  libvirt-daemon-kvm  - native KVM hypervisor
  libvirt-daemon-uml  - User Mode linux
  libvirt-daemon-xen  - Xen, either via XenD or libxl
  libvirt-daemon-lxc  - Linux native containers

When driver modules get turned on, these sub-RPMs will also
gain dependencies on the appropriate driver module .so files
2012-04-04 10:53:49 +01:00
Daniel P. Berrange
bb14513465 Split config files & daemon off from main daemon RPM
Take the libvirt RPM and split it into three pieces

 - libvirt-daemon - libvirtd & other mandatory bits for its operation
 - libvirt-daemon-config-network - the virbr0 config definition
 - libvirt-daemon-config-nwfilter - the firewall config rules

For backwards compatibility with existing installs / application RPM
deps, the 'libvirt' RPM is retained, but will have a dependency on
the 3 new RPMs.
2012-04-04 10:53:35 +01:00
Daniel P. Berrange
189fbe1a8f Remove API XML files from libvirt RPM
The API XML files are now formally installed as part of the
libvirt-devel RPM. Thus there is no need to include them as
%doc in the main libvirt RPM
2012-04-04 10:52:39 +01:00
Daniel P. Berrange
524ba61d9b Move all documentation into a -docs sub-RPM
Currently documentation is split between the libvirt RPM and the
libvirt-devel RPM. In the client-only build there is no libvirt
RPM, so the docs need to live elsewhere. The obvious answer is a
dedicated libvirt-docs RPM. For back-compatibility make the
libvirt-devel RPM require the libvirt-docs RPM

* libvirt.spec.in: Create separate libvirt-docs RPM
2012-04-04 10:52:39 +01:00
Daniel Veillard
782afa98e4 Release of libvirt 0.9.11
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated a number of languages translation including new
  indian languages and regenerated
2012-04-03 15:06:37 +08:00
Daniel Veillard
683e011137 Revert "Refactor the libvirt RPM daemon pieces"
This reverts commit 06a0d57f5a.
2012-04-03 14:49:31 +08:00
Daniel P. Berrange
8bf0442e83 Fix client only RPM build & other misc RPM problems
* libvirt.spec.in: Remove obsolete --with-remote-pid-file arg.
  Add missing %{without_libxl} statement. Fix handling of docs
  in client only build. Put systemtap files in -client RPM
  instead of -daemon RPM
* examples/xml/nwfilter/Makefile.am: Don't install examples if
  nwfilter is disabled.
2012-03-31 13:22:40 +01:00
Daniel P. Berrange
06a0d57f5a Refactor the libvirt RPM daemon pieces
There are a number of flaws with our packaging of the libvirtd
daemon:

 - Installing 'libvirt' does not install 'qemu-kvm' or 'xen'
   etc which are required to actually run the hypervisor in
   question
 - Installing 'libvirt' pulls in the default configuration
   files which may not be wanted & cause problems if installed
   inside a guest
 - It is not possible to explicitly required all the peices
   required to manage a specific hypervisor

This change takes the 'libvirt' RPM and and changes it thus

 - libvirt: just a virtual package with dep on libvirt-daemon,
   libvirt-daemon-config-network & libvirt-daemon-config-nwfilter
 - libvirt-daemon: the libvirt daemon and related pieces
 - libvirt-daemon-config-network: the default network config
 - libvirt-daemon-config-nwfilter: the network filter configs
 - libvirt-docs: the website HTML

We then introduce some more virtual (empty) packages

 - libvirt-daemon-qemu: Deps on libvirt-daemon & 'qemu'
 - libvirt-daemon-kvm: Deps on libvirt-daemon & 'qemu-kvm'
 - libvirt-daemon-lxc: Deps on libvirt-daemon
 - libvirt-daemon-uml: Deps on libvirt-daemon
 - libvirt-daemon-xen: Deps on libvirt-daemon & 'xen'

 - libvirt-qemu: Deps on libvirt-daemon-qemu & libvirt-daemon-config-{network,nwfilter}
 - libvirt-kvm: Deps on libvirt-daemon-kvm & libvirt-daemon-config-{network,nwfilter}
 - libvirt-lxc: Deps on libvirt-daemon-lxc & libvirt-daemon-config-{network,nwfilter}
 - libvirt-uml: Deps on libvirt-daemon-uml & libvirt-daemon-config-{network,nwfilter}
 - libvirt-xen: Deps on libvirt-daemon-xen & libvirt-daemon-config-network

My intent in the future is to turn on the driver modules by
default, at which time 'libvirt-daemon' will cease to include
any specific drivers, instead we'll get libvirt-daemon-driver-XXXX
packages for each driver. The libvirt-daemon-XXX packages will
then pull in each driver that they require.

It is recommended that applications required a locally installed
libvirtd daemon, use either 'Requires: libvirt-daemon-XXXX' or
'Requires: libvirt-XXX' and *not* "Requires: libvirt-daemon"
or 'Requires: libvirt'

* libvirt.spec.in: Refactor RPMs
* docs/packaging.html.in, docs/sitemap.html.in: Document
  new RPM split rationale
2012-03-31 12:20:38 +01:00
Osier Yang
beb76e3742 spec: Add missed dependancy for numad
numad is available since Fedora 17 and RHEL6.X. And it's not supported
on s390[x] and ARM.
2012-03-24 09:35:20 +08:00
Li Zhang
8120325750 Add qemu support for ppc64 on FC16 or above for rpm packaging
On Fedora16 or above, qemu is supported now. So it is added
in rpm packaging.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2012-03-23 12:40:13 -04:00
Martin Kletzander
801a60ff88 Fixed service handling in specfile
After adding the libvirt-guests service into usual runlevels, we used
to start the libvirt-guests service. However this is usually not a
good practice. As mentioned on fedoraproject wiki, the installations
can be in changeroots, in an installer context, or in other situations
where we don't want the services autostarted.
2012-02-24 16:31:04 -07:00
Peter Robinson
cb8b9963fe spec: use ix86 macros
* libvirt.spec.in: Use %{ix86} rather than open-coded list.
2012-02-20 09:37:52 -07:00
Michal Privoznik
286088567d storage: Allow runtime detection of scrub
Currently, if scrub (used for wiping algorithms) is not present
at compile time, we don't support any other wiping algorithms than
zeroing, even if it was installed later. Switch to runtime detection
instead.
2012-02-16 09:09:43 +01:00
Daniel P. Berrange
5452e88c32 Fix typos in API XML file paths
* libvirt.pc.in: Add missing '/api/' in path
* libvirt.spec.in, mingw32-libvirt.spec.in: s/apis/api/
2012-02-15 11:29:38 +00:00
Daniel P. Berrange
c95c90ee4a Install API XML desc to a standard location
Language bindings may well want to use the libvirt-api.xml and
libvirt-qemu-api.xml files to either auto-generate themselves,
or sanity check the manually written bindings for completeness.
Currently these XML files are not installed as standard, merely
ending up as a %doc file in the RPM.

This changes them to be installed into $prefix/share/libvirt/apis/
The *-refs.xml files are not installed, since those are only
useful during generation of the online API doc files.

The pkg-config file is enhanced so that you can query the install
location of the API files. eg

  # pkg-config --variable=libvirt_qemu_api libvirt
  /home/berrange/builder/i686-pc-mingw32/sys-root/mingw/share/libvirt/libvirt-qemu-api.xml

* docs/Makefile.am: Install libvirt-api.xml & libvirt-qemu-api.xml
* libvirt.pc.in: Add vars for querying API install location
* libvirt.spec.in, mingw32-libvirt.spec.in: Include API XML files
2012-02-14 16:42:02 +00:00
Daniel Veillard
bca060a363 Release of libvirt-0.9.10
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: update ja, it and uk localization, fixed the ja one
2012-02-13 22:31:31 +08:00
Laine Stump
60f190735c build: don't require avahi during install
See: https://bugzilla.redhat.com/show_bug.cgi?id=785269

The specfile requires avahi during install if libvirt was built with
avahi support, but there are many situations where it is undesirable
to install avahi due to security concerns. This patch requires only
the avahi-libs package, which is needed by libvirt to call the
function that tries to attach to the avahi daemon, but will instead
silently fail because the avahi-daemon is in the main avahi package,
and that package isn't installed.
2012-02-07 14:24:05 -05:00
Daniel P. Berrange
54a38915d8 Add a virt-host-validate command to sanity check HV config
To assist people in verifying that their host is operating in an
optimal manner, provide a 'virt-host-validate' command. For each
type of hypervisor, it will check any pre-requisites, or other
good recommendations and report what's working & what is not.

eg

  # virt-host-validate
  QEMU: Checking for device /dev/kvm                                         : FAIL (Check that the 'kvm-intel' or 'kvm-amd' modules are loaded & the BIOS has enabled virtualization)
  QEMU: Checking for device /dev/vhost                                       : WARN (Load the 'vhost_net' module to improve performance of virtio networking)
  QEMU: Checking for device /dev/net/tun                                     : PASS
   LXC: Checking for Linux >= 2.6.26                                         : PASS

This warns people if they have vmx/svm, but don't have /dev/kvm. It
also warns about missing /dev/vhost net.
2012-01-27 17:53:18 +00:00
Daniel Veillard
450c927d9a Remove dmidecode dependancy outside PC arches
The new dependancy is only available on ix86, x86_64 and ia64
2012-01-18 00:22:17 +08:00
Daniel Veillard
2f667b5697 Release of libvirt-0.9.9
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated localizations from transifex and regenerated
2012-01-07 12:18:06 +08:00
Daniel Veillard
cbc7025942 Require avahi as an rpm dependancy
As seen in https://bugzilla.redhat.com/show_bug.cgi?id=746111

If compiled with the daemon and avahi support, then it's better
to require avahi at the rpm level to avoid daemon startup errors.
2011-12-29 22:01:57 +08:00
Wen Congyang
6e53293812 spec: fix inverted logic on sanlock
Commit d336dbdb tried to refactor sanlock to avoid building it
on RHEL for architectures where it is not available, but used
the wrong conditional.

* libvirt.spec.in (with_sanlock): Use %ifarch, not %ifnarch.
2011-12-14 10:31:30 -07:00
Eric Blake
3b95f284f1 spec: fix logic bug in deciding to turn on cgconfig
https://bugzilla.redhat.com/show_bug.cgi?id=738725

Commit ecd8725 tried to silence a spurious warning on the initial
libvirt install, and commit ba6cbb1 tried to fix up the logic to the
correct Fedora version, but the warning was still present due to a
logic bug: since %{fedora} and %{rhel} are never simulatanously
set, then 0%{rhel} <= 6 made the %if always true.  Checking for
minimum versions (via >=) is okay, but checking for maximum versions
(via <=) requires a prerequisite test that the platform being tested
is non-zero.

Also fix a bogus setting of with_libxl (although we previously
hard-code with_libxl to 0 for rhel earlier in the file, so this
was not as severe a bug).

* libvirt.spec.in (with_cgconfig): Don't enable cgconfig on F16.
2011-12-08 13:52:54 -07:00
Eric Blake
9c417636c4 spec: make it easier to autoreconf when building rpm
Over time, Fedora and RHEL RPMs have often backported upstream
patches that touched configure.ac and/or Makefile.am; this
necessitates rerunning the autotools for the patch to be effective.
Making this a one-liner spec tweak will make it easier for future
backports to pull patches without having to find all the places
to touch to properly use the autotools.  Meanwhile, there have been
historical instances where an update in the autotools caused FTBFS
situations, so this is not on by default.

* libvirt.spec.in (enable_autotools): New variable, default off.
(BuildRequires): Conditionally add autotools.
(%build): Conditionally use them before configure.
* mingw32-libvirt.spec.in: Likewise.
2011-12-08 09:49:50 -07:00
Daniel P. Berrange
011a3350be Ensure to prefix %{buildroot} when overriding systemd install location
The %makeinstall macro does not set DESTDIR, instead of explicitly
prefixes %{buildroot} onto all paths. Thus we need to do the same
when setting the systemd unit dir

* libvirt.spec.in: Prefix %{buildroot} onto %{unitdir}
2011-12-08 15:48:49 +00:00
Daniel Veillard
7c6b0653f3 Release of libvirt-0.9.8
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: fetched localization update and regenerated
2011-12-08 15:13:50 +08:00
Eric Blake
fea83dde7b spec: don't use chkconfig --list
https://bugzilla.redhat.com/show_bug.cgi?id=694403 reports that
the specfile is incorrectly checking for a running libvirt-guests
service.  For example,

$ LC_ALL=es_ES chkconfig --list libvirt-guests
libvirt-guests 	  0:desactivado		 1:desactivado	   2:desactivado     3:activo	 4:activo  5:activo	    6:desactivado

will fail to find 5:on, even though it is active.  But chkconfig
already has a mode where you can silently use the exit status to
check for an active service.

* libvirt.spec.in (%post): Use simpler chkconfig options, to avoid
issues with localization.
2011-12-07 20:54:07 -07:00
Eric Blake
d336dbdb33 spec: fix sanlock dependency
* libvirt.spec.in (with_sanlock): On RHEL, don't force sanlock
on architectures where it isn't available.
2011-12-05 11:29:32 -07:00
Eric Blake
e7dfa468f9 spec: add dmidecode as prereq
https://bugzilla.redhat.com/show_bug.cgi?id=754909 complains that
because libvirt didn't require dmidecode, that the logs are noisy
and virConnectGetSysinfo needlessly fails.  Even 'virt-what' requires
dmidecode, so it's not that onerous of a dependency.  We may be
able to drop this in the future when we move to parsing sysfs data,
but for now, listing the dependency will help matters.

* libvirt.spec.in (Requires): Sort Requires before BuildRequires.
Add dmidecode.
2011-12-05 11:00:45 -07:00
Eric Blake
764574f7c7 spec: mark directories in /var/run as ghosts
We have several directories that are created on the fly, and which
only contain state relevant to a running libvirtd process (all
located in /var/run).  Since the directories are created as needed,
and make no sense without a running libvirtd, we want them deleted
if libvirt is uninstalled.  And in F15 and newer, /var/run is on
tmpfs (forcing us to recreate on the fly); which means that someone
trying to verify a complete rpm will fail if the directory does not
currently exist because libvirtd has not been started since boot.
The solution, then, is to mark the directories as %ghost, so that
rpm knows that we own them and will clean it up if libvirt is
uninstalled, but will no longer create the directory for us at
install, nor complain at verify time if the directory does not exist.

See https://bugzilla.redhat.com/show_bug.cgi?id=656611.

* libvirt.spec.in (%files): Add %ghost to temporary directories
that we don't install, but want cleaned up on libvirt removal.
2011-12-01 10:56:10 +08:00
Srivatsa S. Bhat
e352b16400 Export KVM Host Power Management capabilities
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.

The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.

However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.

To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
2011-11-22 11:31:22 +08:00
Daniel P. Berrange
4789fb2e4e Add support for systemd init service
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.

The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.

Instead of

  ./configure --with-init-script=redhat

You can now do

  ./configure --with-init-script=systemd

Or better still:

  ./configure --with-init-script=systemd+redhat

We can also now support install of the upstart init script

* configure.ac: Add systemd, and systemd+redhat options to
  --with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
  with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
  and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
2011-11-18 16:16:02 +00:00
Daniel P. Berrange
a132fb0925 Disable numactl on ARM architectures too
* libvirt.spec.in: Disable numactl on ARM
2011-11-10 11:33:17 +00:00
Daniel P. Berrange
c1df2c14b5 Remove usage of brctl command line tool
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.

Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed

* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
2011-11-09 16:33:53 +00:00
Daniel Veillard
ab4823a062 Release of libvirt-0.9.7
* confiure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: update localizations and rebuilt
2011-11-08 14:55:25 +08:00
Daniel P. Berrange
f33b5792f7 Create /var/lib/libvirt/filesystems for LXC trees
We already have a /var/lib/libvirt/images for OS install images.
We need a separate /var/lib/libvirt/filesystems for OS install
trees, since SELinux labelling will be different

* libvirt.spec.in: Add /var/lib/libvirt/filesystems
* src/Makefile.am: Create /var/lib/libvirt/filesystems
2011-11-01 18:40:37 +00:00
Daniel P. Berrange
777ffbd0e2 Allow for URI aliases when connecting to libvirt
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.

It allows one parameter

 uri_aliases = [
   "hail=qemu+ssh://root@hail.cloud.example.com/system",
   "sleet=qemu+ssh://root@sleet.cloud.example.com/system",
 ]

Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES

* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
  with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
  with no scheme
2011-10-19 09:14:34 +01:00
Eric Blake
df92bab4a8 spec: mingw cleanups
* libvirt.spec.in (%configure): Drop unused %{one} macro.
* mingw32-libvirt.spec.in (%{rhel}): Compile ESX but not HyperV on
mingw build for RHEL.
(%build): Make configure honor spec conditionals.  Reorder to
match libvirt.spec.
* autobuild.sh (mingw): Update list to match.
Suggested by Daniel P. Berrange.
2011-10-13 09:21:02 -06:00
Eric Blake
bbbdc14854 build: fix 'make rpm'
Since commit ddf3bd3, 'make rpm' failed with:

RPM build errors:
    File not found: /home/remote/eblake/rpmbuild/BUILDROOT/libvirt-0.9.6-1.fc14.eblake1318366440.x86_64/usr/share/systemtap/tapset/libvirtd.stp

* libvirt.spec.in (with_dtrace): Match installed .stp files.
2011-10-11 15:44:55 -06:00
Dan Horák
099dc93b7c disable xenlight for non-Xen platforms
when building libvirt in Fedora/s390x I've found that xenlight needs to
be explicitly disabled in the spec file. Configure properly sets the
library as non-existent, but the %files section still wants to package
the 3 /var/*/libvirt/libxl directories. See also
https://bugzilla.redhat.com/show_bug.cgi?id=745020
2011-10-11 14:24:18 -06:00
Eric Blake
5298551e07 init: raise default system aio limits
https://bugzilla.redhat.com/show_bug.cgi?id=740899 documents that
if qemu uses aio=native for its disks, then it consumes 128 aio
requests per disk.  On a host with multiple guests, this can quickly
run out of kernel aio requests with the default aio-max-nr of
65536.  Kernel developers have confirmed that there is no up-front
cost to raising this limit (a larger limit merely implies that more
aio requests can be issued in parallel, which in turn will result
in more kernel memory allocation, only if the system really does use
that many requests).  Since the system default limit prevents 256
disks, which is well within libvirt's current scalability, this
patch installs a file to raise the limit and document it in case a
system administrator has further cause to tune the limit.  The
install only works on platforms new enough to source /etc/sysctl.d/*
alongside /etc/sysctl.conf (F14 and RHEL 6).

* daemon/libvirtd.sysctl: New file.
* daemon/Makefile.am (EXTRA_DIST): Ship it.
(install-init, uninstall-init): Install it.
* libvirt.spec.in (%files): Include it in rpm.
2011-10-05 14:49:35 -06:00
Eric Blake
ba6cbb182b spec: F15 still uses cgconfig, RHEL lacks hyperv
Commit ecd8725c dropped attempts to probe the cgconfig service on
new enough Fedora where systemd took over that aspect of the system,
but mistakenly used F14 instead of F15 as the cutoff point.

https://bugzilla.redhat.com/show_bug.cgi?id=741358

Also, RHEL does not include HyperV support yet.

* libvirt.spec.in (with_cgconfig): Check cgconfig service in F15.
(%{?rhel}): Provide default for with_hyperv.
2011-09-27 09:03:26 -06:00
Daniel Veillard
508de7eedb Release of libvirt-0.9.6 2011-09-22 14:53:23 +08:00
Daniel Veillard
a362f1f7aa Release of libvirt-0.9.5
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: fetch updated translations from transifex and rebuilt
2011-09-20 14:17:47 +08:00
Daniel P. Berrange
19ff0ddfbb Update to require sanlock 1.8 for license compliance
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.

For all this we require sanlock >= 1.8

* configure.ac: Check for sanlock_client.so instead of sanlock.so
  and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
  sanlock_align
2011-09-20 11:18:54 +08:00
Eric Blake
ecd8725c1a spec: silence warnings when installing in F16
https://bugzilla.redhat.com/show_bug.cgi?id=738725 documents that
'yum install libvirt' in Fedora 16 is rather noisy.  This fixes
the problems.

* libvirt.spec.in (%post client): Silence chkconfig warning about
SysV services.
(%post) [with_cgconfig]: Drop for Fedora 15 and newer, where
systemd does this automatically.
2011-09-17 06:27:00 -06:00
Michal Privoznik
a73e92ba08 spec: Require augeas for sanlock
Even though we BuildRequire augeas in some cases, we need to require
it even after if we build with sanlock. virt-sanlock-cleanup use it.
2011-09-15 17:08:59 +02:00
Osier Yang
8918fc8edf qemu_api: Update libvirt spec file 2011-09-14 11:39:02 +08:00
Eric Blake
2a95a3e976 snapshot: update rng to support full domain in xml
This patch will probably cause merge conflicts to those trying
to do backports.  The end goal is simple - domaincommon.rng
should be the state of domain.rng pre-patch, with a few lines
tweaked in the header, while domain.rng post-patch is now just
a shell that includes domaincommon.rng and sets the <start>.

* docs/schemas/domain.rng: Move guts...
* docs/schemas/domaincommon.rng: ...to new file.
* docs/schemas/domainsnapshot.rng: Allow new xml.
* docs/schemas/Makefile.am (schema_DATA): Distribute new file.
* tests/domainsnapshotxml2xmlout/full_domain.xml: New test.
* libvirt.spec.in (%files client): Ship new file.  Sort lines.
* mingw32-libvirt.spec.in: Likewise.
2011-09-03 08:12:13 -06:00
Osier Yang
660cb2530f storage: Add mkfs and libblkid to build system 2011-09-02 21:16:50 +08:00
Matthias Bolte
f2e7064373 hyperv: Add configure check for OpenWSMAN 2011-08-26 17:52:54 +02:00
Daniel Veillard
14c2ca3db9 Release of libvirt-0.9.4
* configure.ac docs/news.html.in libvirt.spec.in: updates for new
  release
* po/*.po*: pulled translations from the transifex teams and regenerated
  localizations
2011-08-03 11:02:42 +08:00
Daniel P. Berrange
7df6945d7f Add libtasn1-devel as a BuildRequires for libvirt.spec
* libvirt.spec.in: Add libtasn1-devel
2011-07-26 11:21:11 +01:00
Michal Privoznik
90074ecfa7 bandwidth: Implement functions to enable and disable QoS
These function executes 'tc' with appropriate arguments to set
desired QoS setting on interface or bridge during its creation.
2011-07-25 13:49:55 +08:00
Daniel P. Berrange
c198d91667 Pre-create /var/lib/libvirt/sanlock directory
The sanlock plugin for libvirt expects the directory
/var/lib/libvirt/sanlock to exist. Create this and add
it to the RPM

* libvirt.spec.in: Add /var/lib/libvirt/sanlock
* src/Makefile.am: Create /var/lib/libvirt/sanlock
2011-07-22 15:52:44 +01:00
Laine Stump
a3d95b550b conf: put virtPortProfile struct / functions in a common location
virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).
2011-07-21 14:46:33 -04:00
Wen Congyang
f209333996 build: disable some drivers when building without libvirt daemon
We disable some drivers when building without libvirtd in configure,
but we do not do the same thing in libvirt.spec. It may break rpm
building without libvirtd.
2011-07-14 22:59:07 +08:00
Daniel Veillard
920ffe1b0a Fix rpm build with sanlock and without QEmu
The qemu-sanlock.conf file is not installed in this case
2011-07-11 15:57:01 +08:00
Laine Stump
0c97dc4159 xml: create an RNG file for common types and move some definitions there
domain.rng, network.rng, and interface.rng already use a few of the
same types (or in some cases *should* but don't), and an upcoming code
change will have them sharing even more. To prepare for that, this
patch takes those common data type definitions and moves them into
basictypes.rng.

This may break some rule about the need to RNG files to be autonomous
or something, but I saw that storageencryption.rng is used in this
way, so I figured it must not be completely against the law...
2011-07-05 12:33:21 -04:00
Daniel Veillard
7976d96dd7 Release of libvirt-0.9.3
* configure.ac docs/news.html.in libvirt.spec.in: update for the
  new release
* po/*.po*: updated and regenerated localizations
2011-07-04 15:54:36 +08:00
Eric Blake
d710531f95 build: sanlock-devel is not in F15 yet
* libvirt.spec.in (with_sanlock): Only default on in rawhide.
Reported by Gerhard Stenzel.
2011-06-28 11:25:04 -06:00
Daniel P. Berrange
97e4f21782 Support automatic creation of leases for disks in sanlock
The current sanlock plugin requires a central management
application to manually add <lease> elements to each guest,
to protect resources that are assigned to it (eg writable
disks). This makes the sanlock plugin useless for usage
in more ad hoc deployment environments where there is no
central authority to associate disks with leases.

This patch adds a mode where the sanlock plugin will
automatically create leases for each assigned read-write
disk, using a md5 checksum of the fully qualified disk
path. This can work pretty well if guests are using
stable disk paths for block devices eg /dev/disk/by-path/XXXX
symlinks, or if all hosts have NFS volumes mounted in
a consistent pattern.

The plugin will create one lockspace for managing disks
with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__.
For each VM disks, there will be another file to hold
a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd
Each VM disk lease is usually 1 MB in size. The script
virt-sanlock-cleanup should be run periodically to remove
unused lease files from the lockspace directory.

To make use of this capability the admin will need to do
several tasks:

 - Mount an NFS volume (or other shared filesystem)
   on /var/lib/libvirt/sanlock
 - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf
   with a unique value for each host with the same NFS
   mount
 - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf

Technically the first step can be skipped, in which case
sanlock will only protect against 2 vms on the same host
using the same disk (or the same VM being started twice
due to error by libvirt).

* src/locking/libvirt_sanlock.aug,
  src/locking/sanlock.conf,
  src/locking/test_libvirt_sanlock.aug: Add config params
  for configuring auto lease setup
* libvirt.spec.in: Add virt-sanlock-cleanup program, man
  page
* tools/virt-sanlock-cleanup.in: Script to purge unused
  disk resource lease files
2011-06-28 18:18:06 +01:00
Daniel P. Berrange
58eb4f2cbb Support loading a configuration file for sanlock plugin
Introduce a configuration file with a single parameter
'require_lease_for_disks', which is used to decide whether
it is allowed to start a guest which has read/write disks,
but without any leases.

* libvirt.spec.in: Add sanlock config file and augeas
  lens
* src/Makefile.am: Install sanlock config file and
  augeas lens
* src/locking/libvirt_sanlock.aug: Augeas master lens
* src/locking/test_libvirt_sanlock.aug: Augeas test file
* src/locking/sanlock.conf: Example sanlock config
* src/locking/lock_driver_sanlock.c: Wire up loading
  of configuration file
2011-06-28 18:07:06 +01:00
Ruben Kerkhof
ca43756800 Only include parthelper if built with storage_disk
Parthelper is only compiled if both --with-libvirtd
and --with-storage-disk are set.

Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
2011-06-27 08:50:40 -06:00
Eric Blake
1486099cca build: require newer netcf when it is available
When building rpms for newer Fedora or RHEL, take advantage of the
newer netcf packaging to guarantee interface snapshot support.

* libvirt.spec.in (BuildRequires): Bump minimum version on
platforms that support netcf 0.1.8.
2011-06-21 14:27:32 -06:00
Matthias Bolte
7e3205cd10 Move XenAPI driver to correct spec file section
The XenAPI driver works like the ESX and PHyp driver by using its
own HTTPS based remote protocol.
2011-06-20 10:23:55 +02:00
Matthias Bolte
7c7626aee0 Move VMware Workstation/Player driver to correct spec file section
The VMware driver works like the OpenVZ driver by using a commandline
tool for management. It dosen't use it's own remote protocol.
2011-06-09 20:28:18 +02:00
Daniel Veillard
2c5ded6e82 Release of libvirt-0.9.2
* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: updated translations and regenerated
2011-06-06 11:46:37 +08:00
Daniel P. Berrange
9f135031ff Add a plugin for the 'sanlock' project
Sanlock is a project that implements a disk-paxos locking
algorithm. This is suitable for cluster deployments with
shared storage.

* src/Makefile.am: Add dlopen plugin for sanlock
* src/locking/lock_driver_sanlock.c: Sanlock driver
* configure.ac: Check for sanlock
* libvirt.spec.in: Add a libvirt-lock-sanlock RPM
2011-06-02 10:54:01 +01:00
Richard W.M. Jones
ee9ceb3295 libvirt.spec: /var/cache/libvirt should be 0711.
This allows qemu to create files in /var/cache/libvirt/qemu/, and
specifically is required to fix virDomainMemoryPeek.
2011-05-20 16:18:11 +01:00
Daniel Veillard
9b889aacef Release of libvirt-0.9.1
* configure.ac libvirt.spec.in docs/news.html.in: update and document
  the release
* po/*.po*: update localizations for german, polish, spanish, ukrainian
  and vietnamese coming from transifex, regenerate
2011-05-05 11:25:13 +08:00
Alan Pevec
16d6b0d80a Experimental libvirtd upstart job
To install it, disable libvirtd sysv initscript:
    chkconfig libvirtd off
    service libvirtd stop

and enable libvirtd upstart job:
    cp  /usr/share/doc/libvirt-*/libvirtd.upstart \
        /etc/init/libvirtd.conf
    initctl reload-configuration
    initctl start libvirtd

Test:
    initctl status libvirtd
libvirtd start/running, process 3929
    killall -9 libvirtd
    initctl status libvirtd
libvirtd start/running, process 4047

I looked into the possibility to use the upstart script from Ubuntu or
at least getting inspiration from it but that's not possible. "expect
daemon" is a nice thing but it only works if the process is defined with
exec stanza instead of script ... no script. Unfortunately, with exec
stanza environment variables can only be set within upstart script
(i.e., configuration in /etc/sysconfig/libvirtd can't work). Hence, we
need to use script stanza, source sysconfig, and execute libvirtd
without --daemon. For similar reasons we can't use limit stanza and need
to handle DAEMON_COREFILE_LIMIT in job's script.
2011-04-18 11:38:30 +02:00
Daniel P. Berrange
a7e80bde11 Fix typo in systemtap tapset directory name
The systemtap directory for tapsets is called

  /usr/share/systemtap/tapset

Not

 /usr/share/systemtap/tapsets

* daemon/Makefile.am,libvirt.spec.in: s/tapsets/tapset/
2011-04-05 17:44:12 +01:00
Daniel Veillard
d17e438ad3 Release of libvirt-0.9.0
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update polish translation and regenerate
2011-04-04 20:15:45 +08:00
Daniel Veillard
1613912dc2 Add libvirt_iohelper to spec file
The new iohelper binary was missing from the packaging spec
2011-03-30 08:54:23 +08:00
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Eric Blake
206fc979b1 rpm: add missing dependencies
Among others, the missing radvd dependency showed up as:

error: Failed to start network ipv6net
error: Cannot find radvd - Possibly the package isn't installed: No such file
or directory

even when radvd was installed, because the RADVD preprocessor
symbol was missing at configure time.

* libvirt.spec.in (with_network): Add BuildRequires for radvd,
iptables, and ip6tables.
(BuildRequires): Add libxslt and augeas for docs and test.
(with_libvirtd): Add module-init-tools for modprobe.
(with_nwfilter): Add BuildRequires for ebtables.
(with_esx): Fix esx build on RHEL 5, thanks to curl-devel rename.
2011-03-23 11:16:49 -06:00
Eric Blake
7ee06f334b rpm: separate runtime and build requirements
* libvirt.spec.in (Requires): Reorganize requirements a bit; no
functional change.
2011-03-23 11:03:23 -06:00
Daniel P. Berrange
3c204d7d5b Disable libxl build in RPM on Fedora < 16
The xen RPM in Fedora isn't new enough to support libxl builds
yet. Disable it until Fedora 16

* libvirt.spec.in: Disable libxl on Fedora < 16
2011-03-22 14:25:51 +00:00
Jim Fehlig
2b84e445d5 Add libxenlight driver
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0.  The driver is stateful and runs
privileged only.

Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI.  Driver selection is based on the status
of xend.  If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified.  If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.

V6:
 - Address several code style issues noted by Daniel Veillard
 - Make drive work with xen:/// URI
 - Hold domain object reference while domain is injected in
   libvirt event loop.  Race found and fixed by Markus Groß.

V5:
 - Ensure events are unregistered when domain private data
   is destroyed.  Discovered and fixed by Markus Groß.

V4:
 - Handle restart of libvirtd, reconnecting to previously
   started domains
 - Rebased to current master
 - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)

V3:
  - Reserve vnc port within driver when autoport=yes

V2:
  - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
  - Rebased to current master
  - Plug memory leaks found by Stefano Stabellini and valgrind
  - Handle SHUTDOWN_crash domain death event

[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
2011-03-18 08:57:48 -06:00
Eric Blake
80e6200f32 build: improve rpm generation for distro backports
When building for an older distro, it's convenient to just
tell rpmbuild to define dist (for example, to .el6_0), rather
than also remembering to define rhel to 6.

* libvirt.spec.in: Guess %{rhel} based on %{dist}.
Based on an idea by Jiri Denemark.
2011-03-16 11:56:00 -06:00
Daniel Veillard
e7aeed0067 Add logrotate support for libvirtd.log
As the file may grow quite a bit especially with debug turned on.
* daemon/libvirtd.logrotate.in daemon/Makefile.am libvirt.spec.in:
  add new logrotate file for the daemon log
2011-03-04 22:43:55 +08:00
Eric Blake
e57f834547 build: add dependency on gnutls-utils
* libvirt.spec.in (Requires): Add gnutls-utils, for virt-pki-validate.
Suggested by Daniel P. Berrange.
2011-02-21 11:18:35 -07:00
Osier Yang
39164c11d3 Requires gettext for client package
libvirt-guests invokes functions in gettext.sh, so we need to
require gettext package in spec file.

Demo with the fix:
% rpm -q gettext
package gettext is not installed

% rpm -ivh libvirt-client-0.8.8-1.fc14.x86_64.rpm
error: Failed dependencies:
	gettext is needed by libvirt-client-0.8.8-1.fc14.x86_64

* libvirt.spec.in
2011-02-18 13:45:13 +08:00
Laine Stump
5754dbd56d Give each virtual network bridge its own fixed MAC address
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463

The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".

The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).

Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.

I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.

Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).

docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
    auto-generate mac address when needed,
    create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
2011-02-17 13:36:32 -05:00
Osier Yang
df1011ca8e storage: Allow to delete device mapper disk partition
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Error: Expecting a partition number.

This patch introduces 'dmsetup' to fix it.

Changes:
  - New function "virIsDevMapperDevice" in "src/utils/utils.c"
  - remove "is_dm_device" in "src/storage/parthelper.c", use
    "virIsDevMapperDevice" instead.
  - Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
  - Check "dmsetup" in 'configure.ac' for "with-storage-disk"
  - Changes on "src/Makefile.am" to link against libdevmapper
  - New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"

Changes from v1 to v3:
  - s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
  - replace "virRun" with "virCommand"
  - sort the list of util functions in "libvirt_private.syms"
  - ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.

e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted

Name                 Path
-----------------------------------------
2011-02-17 15:29:07 +08:00
Daniel Veillard
43f8773c1f Release of libvirt-0.8.8
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
2011-02-17 12:11:03 +08:00
Daniel P. Berrange
cee61fc298 Imprint all logs with version + package build information
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:13:28.013: 17536: info : libvirt version: 0.8.7
 18:13:28.013: 17536: debug : virInitialize:361 : register drivers
 ...

The 'configure' script gains two new arguments which can be
used as

   --with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
   --with-packager-version="1.fc14"

to allow distros to append a custom string with package specific
data.

The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
 18:14:52.086: 17551: debug : virInitialize:361 : register drivers

Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds

* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
2011-02-11 14:13:08 +00:00
Jiri Denemark
b9c1a9cbff spec: Start libvirt-guests only if it's on in current runlevel 2011-01-19 15:01:52 +01:00
Daniel Veillard
6675e00744 Release of libvirt-0.8.7
* configure.ac libvirt.spec.in docs/news.html.in: bump version and add
  documentation
* po/*po*: regenerate po and pot files
2011-01-04 03:37:17 +01:00
Wen Congyang
3b13d25232 build: fix building error when building without libvirtd
When I build libvirt without libvirtd, I receive some errors:
cp: cannot stat `/home/wency/rpmbuild/BUILDROOT/libvirt-0.8.6-1.el6.x86_64/etc/libvirt/qemu/networks/default.xml': No such file or directory

My build step:
# ./autogen.sh --without-libvirtd
# make dist
# rpmbuild --nodeps --define "_sourcedir `pwd`" --define "_without_libvirtd 1" -ba libvirt.spec

The reason is we disable network when we do not build libvirt daemon in configure.ac.
After fixing this bug, I build libvirt without libvirtd, I receive other errors:
RPM build errors:
    Installed (but unpackaged) file(s) found:
   /usr/share/doc/libvirt-0.8.6/html/32favicon.png
   /usr/share/doc/libvirt-0.8.6/html/api.html
..

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2010-12-24 07:31:34 -07:00
Jiri Denemark
40dbbd6e5f spec: Enable ESX driver on RHEL 2010-12-23 23:13:09 +01:00
Daniel P. Berrange
318a4f6be9 spec: Automatically turn on cgconfig service
A number of the libvirt APIs require the use of cgroups. This is not
enabled by default on a RHEL6 install. After discussion with cgroups
team, it was decided that upon installation of the libvirt RPM, we
should automatically turn on the cgroups service. This will activate a
default configuration that turns on all cgroups controllers libvirt
requires for full operation.
2010-12-23 23:13:07 +01:00
Eric Blake
973ada0e0b build: skip vmware driver when building for RHEL
* libvirt.spec.in: Provide vmware conditionals.
2010-12-21 10:13:50 -07:00
Dan Kenigsberg
91b3e1038f spec: do not start libvirt-guests if that service is off
starting a service during rpm installation is impolite. It is even worse if done
during upgrade, for a service that was explicitly turned off.
2010-12-09 16:55:48 -07:00
Daniel Veillard
a33db6cbfb Release of libvirt 0.8.6
- configure.ac libvirt.spec.in: bump version, add a missing systemtap
  build requirement
- docs/news.html.in: add informations about the release
- po/*: updated Polish and Dutch localizations, and regenerated
- tests/qemuxml2argvtest.c: Fix build problem
2010-11-30 20:42:46 +01:00
Cole Robinson
34d8ca2b7e rpm: Fix summary wording 2010-11-12 10:07:33 -05:00
Eric Blake
f970d802ab rpm: fix /var/lib/libvirt permissions
https://bugzilla.redhat.com/show_bug.cgi?id=649511

Regression of forcing 0700 permissions (which breaks guest startup
because the qemu user can't see /var/lib/libvirt/*.monitor) was
introduced in commit 66823690e, as part of libvirt 0.8.2.

* libvirt.spec.in (%files): Drop %{_localstatedir}/lib/libvirt,
since libvirt depends on libvirt-client.
(%files client): Guarantee 755 permissions on
%(_localstatedir}/lib/libvirt, since the qemu user must be able to
do pathname resolution to a subdirectory.
2010-11-10 09:00:47 -07:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Daniel Veillard
4c2b3e1d29 Release of libvirt-0.8.5
* configure.ac libvirt.spec.in: new version
* docs/news.html.in: update news page and improve format
* po/*.po*: Update po again
2010-10-29 16:54:07 +02:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Daniel P. Berrange
8f680ad3b8 Basic framework for auditing integration
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages
2010-10-19 17:31:31 +01:00
Dan Kenigsberg
0df552cd37 qemu: let qemu group look below /var/lib/libvirt/qemu/
Vdsm needs to communicate with its guest agent via unix domain socket,
which qemu creates due to the following domain xml device:

    <channel type='unix'>
      <target type='virtio' name='com.redhat.rhevm.vdsm'/>
      <source mode='bind' path='/var/lib/libvirt/qemu/channels/fcp-xp-1.com.redhat.rhevm.vdsm'/>
    </channel>

The location of the socket below /var/lib/libvirt/qemu/channels makes
sense, to humans and selinux policy alike. However, that socket should
be accessible to vdsm, too.

Due to other (storage) reasons, vdsm is to join the "qemu" group. With
this patch, vdsm can look below /var/lib/libvirt/qemu and connect to the
socket.

The socket itself should be chmod'ed to allow qemu group read/write, but
that's for another project.

BZ#643407
2010-10-18 10:23:03 -06:00
Eric Blake
e3e31303d5 build: skip xenapi driver when building for RHEL
https://bugzilla.redhat.com/show_bug.cgi?id=643118

* libvirt.spec.in: Provide xenapi conditionals.
2010-10-15 07:31:36 -06:00
Daniel Veillard
9a8e152fef Libvirt release 0.8.4
update news, spec and french localizaton
2010-09-10 17:24:36 +02:00
Jiri Denemark
ad026e97bf build: Fix permissions of sysconfig files 2010-09-07 10:03:14 +02:00
Jiri Denemark
5cb7316372 spec: Fix undefined with_libnl
When building libvirt RPM without macvtap, with_libnl would be
undefined.
2010-08-25 12:28:02 +02:00
Jiri Denemark
e26672f786 bridge: Add --dhcp-no-override option to dnsmasq
--dhcp-no-override description from dnsmasq man page:

      Disable  re-use  of  the  DHCP servername and filename fields as
      extra option space. If it can, dnsmasq moves the boot server and
      filename  information  (from  dhcp-boot)  out of their dedicated
      fields into DHCP options. This make extra space available in the
      DHCP  packet  for options but can, rarely, confuse old or broken
      clients. This flag forces "simple and safe" behaviour  to  avoid
      problems in such a case.

It seems some virtual network card ROMs are this old/buggy so let's add
--dhcp-no-override as a workaround for them. We don't use extra DHCP
options so this should be safe. The option was added in dnsmasq-2.41,
which becomes the minimum required version.
2010-08-12 16:38:19 +02:00
Daniel Veillard
d3d33c8281 Release of libvirt-0.8.3
* configure.ac docs/news.html.in libvirt.spec.in: updates
* po/*.po*: update and regenerated
2010-08-04 15:03:25 +02:00
Justin Clift
de7d4c6ae7 man pages: update authors and copyright notice for libvirtd and virsh
This patch removes the individual author names from the libvirtd and virsh
man pages, instead referring to the main AUTHORS file distributed with
libvirt.  This approach is needed, as we can't guarantee unicode support
across all versions of pod2man used with libvirt.

Additionally, this patch includes the libvirtd man page in the spec file
used with "make rpm".  Without this patch "make rpm" is broken.
2010-07-17 04:51:01 +10:00
Matthias Bolte
9af989fabc Add openauth example to demonstrate a custom auth callback 2010-07-13 13:50:27 +02:00
Daniel Veillard
6f8e223780 Release of libvirt-0.8.2
- configure.ac docs/news.html.in libvirt.spec.in: updated
- po/*/o* : updated or.po and regenerated
2010-07-05 17:29:25 +02:00
Jiri Denemark
1a5c465ee5 Fix libvirt-guests init script
Firstly, the init script has to touch its file under /var/lock/subsys
when started, otherwise the system would think it's not running and
won't stop it during shutdown.

Secondly, for some reason there is a policy to automatically enable
init scripts when they are installed, so let the specfile do this. We
also need to start the init script to ensure it will be stopped during
the first shutdown after installing the package.

Also $LISTFILE should be enclosed by quotes everywhere as suggested by
Eric.
2010-05-28 18:00:53 +02:00
Matthias Bolte
fa0bb9f6b1 Use printf instead of echo -e in libvirt.spec.in
make rpm created dummy tests containing '-e #!/bin/sh' for me.
2010-05-27 01:11:15 +02:00
Matthias Bolte
5ac0272370 Install, distribute and package domainsnapshot.rng 2010-05-27 01:11:15 +02:00
Stefan Berger
a34871d9a5 vepa+vsi: Introduce dependency on libnl
This patch introduces a dependency on libnl, which subsequent patches
will then use.

Changes from V1 to V2:
- added diffstats
- following changes in tree
2010-05-25 15:31:38 -04:00
Jiri Denemark
66823690e4 Init script for handling guests on shutdown/boot
Example output during shutdown:

Running guests on default URI: console, rhel6-1, rhel5-64
Running guests on lxc:/// URI: lxc-shell
Running guests on xen:/// URI: error: no hypervisor driver available for xen:///
error: failed to connect to the hypervisor
Running guests on vbox+tcp://orkuz/system URI: no running guests.
Suspending guests on default URI...
Suspending console: done
Suspending rhel6-1: done
Suspending rhel5-64: done
Suspending guests on lxc:/// URI...
Suspending lxc-shell: error: Failed to save domain 9cba8bfb-56f4-6589-2d12-8a58c886dd3b state
error: this function is not supported by the hypervisor: virDomainManagedSave

Note, the "Suspending $guest: " shows progress during the suspend phase
if domjobinfo gives meaningful output.

Example output during boot:

Resuming guests on default URI...
Resuming guest rhel6-1: done
Resuming guest rhel5-64: done
Resuming guest console: done
Resuming guests on lxc:/// URI...
Resuming guest lxc-shell: already active

Configuration used for generating the examples above:
URIS='default lxc:/// xen:/// vbox+tcp://orkuz/system'

The script uses /var/lib/libvirt/libvirt-guests files to note all active
guest it should try to resume on next boot. It's content looks like:

default 7f8b9d93-30e1-f0b9-47a7-cb408482654b 085b4c95-5da2-e8e1-712f-6ea6a4156af2 fb4d8360-5305-df3a-2da1-07d682891b8c
lxc:/// 9cba8bfb-56f4-6589-2d12-8a58c886dd3b
2010-05-21 09:33:30 +02:00
Stefan Berger
beccb0deca rpmbuild: add ebtables & ip(6)tables dependency for rpm
Add ebtables,iptables & iptables-ipv6 dependency to rpm.

Changes from V1 to V2:
  -passing --without-libpcap to configure script, if libpcap is not to be used
2010-05-05 12:20:28 -04:00
Daniel Veillard
7efa3937f0 Various fixes for the spec file
This includes various things:
 - fix the Requires: libvirt-client to use %{name} to allow easy
   renaming
 - when building ESX support one need libcurl-devel
 - remove Makefile[.in] from xml/nwfilter in the docs, as this breaks
   parallel install ation of i686 and x86_64 packages
 - don't include nwfilter config files if not building with the daemon
all relatively trivial which is why I packed them together
* libvirt.spec.in: fix various small bugs
2010-05-04 16:13:55 +02:00
Daniel Veillard
5d65d32f2c Release of libvirt-0.8.1
* configure.ac docs/news.html.in libvirt.spec.in: updates for release
* po/*.po*: updated localizations and regenerated
2010-04-30 18:55:08 +02:00
Daniel Veillard
4e041189f8 Move dnsmasq host file to a separate directory
use /var/lib/libvirt/dnsmasq since /var/lib/libvirt/network is
unreadable by the dnsmasq binary

* src/network/bridge_driver.c: update DNSMASQ_STATE_DIR
* src/Makefile.am: create it on make install
* libvirt.spec.in: take the new directory into account
2010-04-28 15:53:09 +02:00
Daniel P. Berrange
f6770e8665 Run test suite as part of RPM build process
To ensure that patches in the RPM don't break any functionality
it is neccessary to run the test suites during build. It currently
has 3 tests disabled

 - daemon-conf: this is totally broken, since it relies on
   being able to resolve the 'libvirt' group & being able to
   resolve hostnames at daemon startup. This isn't possible
   in a mock build root
 - seclabeltest: fails to initialize selinux in the mock
   build root. Possibly fixable
 - nodeinfotest: broken on s390 + ppc - this is a real bug

* libvirt.spec.in: Add a %check section, with 3 tests
   temporarily disabled
2010-04-15 17:56:06 +01:00
Daniel Berteaud
505242f817 Fix spec file for builds without lxc
* libvirt.spec.in: fix a cut and paste error
2010-04-13 10:40:21 +02:00
Daniel Veillard
bfcca58787 Release of libvirt-0.8.0
* configure.ac docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
  updates for release of 0.8.0
* po/*.po po/libvirt.pot: updated a lar set of localizations, and merge
  the messages
2010-04-12 19:39:20 +02:00
Stefan Berger
3bf24abc8c nwfilter: Support for learning a VM's IP address
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple  IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.

So, when for example an interface description in the domain XML has
looked like this up to now:

    <interface type='bridge'>
      <source bridge='mybridge'/>
      <model type='virtio'/>
      <filterref filter='clean-traffic'>
        <parameter name='IP' value='10.2.3.4'/>
      </filterref>
    </interface>

you may omit the IP parameter:

    <interface type='bridge'>
      <source bridge='mybridge'/>
      <model type='virtio'/>
      <filterref filter='clean-traffic'/>
    </interface>

Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface  (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.

A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.

* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
  src/nwfilter/nwfilter_ebiptables_driver.[ch]
  src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
2010-04-07 23:12:21 +02:00
Stefan Berger
8cf0ed02be nwfilter: Add filter schema for nwfilter XML, extend domain XML schema
This patch adds a relaxng nwfilter schema along with a test that
verifies all the test output XML against the schema. The input XMLs
contain a lot of intentional out-of-range values that make them fail the
schema verification, so I am not verifying against those.
2010-04-06 11:09:46 -04:00
Eric Blake
a792bf240f build: more fallout from test -a
* cfg.mk (sc_prohibit_test_minus_ao): Also check for [.
* docs/Makefile.am (%.html, html/index.html): Avoid non-portable
test usage.
* libvirt.spec.in (%post): Likewise.
* tools/virt-pki-validate.in (servercert.pem): Likewise.
* configure.ac (LOGNAME): Use test, not [, in files processed by
autoconf.
Detected by Matthias Bolte.
2010-03-31 15:18:13 -06:00
Daniel Veillard
b4b0949dd7 Distribute nwfilter xml files and add them to rpm
* examples/xml/nwfilter/Makefile.am: add all xml to the distribution
* libvirt.spec.in: reference them from the rpm spec file to have them
  available in the main libvirt package
2010-03-31 10:20:22 +02:00
Daniel Veillard
e7d29e234c Fix logroate rpm build breakage
related to fix of bug https://bugzilla.redhat.com/show_bug.cgi?id=547514
2010-03-18 13:50:08 +01:00
Daniel Veillard
89bf843a6d Change logrotate to be per-hypervisor logs
Having a single logrotate configuration file for all hypervisors
did not work as logrotate would get confused if an hypervisor not
supported on that platform was still listed. Simplest is to split
the logrotate as separate per hypervisor files and change the
spec file to only install the ones compiled in.
* daemon/libvirtd.lxc.logrotate.in daemon/libvirtd.qemu.logrotate.in
  daemon/libvirtd.uml.logrotate.in: copy and split the original
  daemon/libvirtd.logrotate.in file
* daemon/Makefile.am: update to support the different files and
  cleanup in sed suggested by Eric Blake
* libvirt.spec.in: only install the relevant logrotate configs
* daemon/.gitignore: update logrotate generated list
2010-03-10 11:27:02 +01:00
Daniel Veillard
703c165188 Release of libvirt-0.7.7
* configure.ac libvirt.spec.in: update with new version
* docs/news.html.in: add list of changes in 0.7.7
* po/*po*: updated spanish and russian localisations, rebuilt
2010-03-05 17:10:21 +01:00
David Allan
b2111ba3cd Revert fs pool formatting
* We are reverting this patch pending a discussion of the right way to implement.
2010-02-26 03:33:27 -05:00
Dave Allan
b738016b78 Format FS pools on creation
Create the filesystem on the partition used by the pool
* configure.ac: check for mkfs availability
* libvirt.spec.in: add extra require on util-linux for mkfs
* src/storage/storage_backend_fs.c: run mkfs with the expected
  fs type when creating a filesystem pool
2010-02-24 09:51:34 +01:00
Daniel Veillard
31a5ee922a Release of libvirt-0.7.6
* configure.ac docs/news.html.in libvirt.spec.in: version bump and doc
  updates
* po/*.po*: updated and regenerated the localizations
2010-02-03 18:16:25 +01:00
Daniel Veillard
3f24ae2eb9 Release of libvirt-0.7.5 2009-12-23 17:00:22 +01:00
Jiri Denemark
79fa4a98d1 Move cpu_map.xml to -client RPM
All the cpu code is part of libvirt library and it might be used by
drivers which do not require libvirtd to be running.
2009-12-23 14:28:42 +01:00
Jiri Denemark
ab007c3da0 Add cpu_map.xml to libvirt.spec
* libvirt.spec.in: embbed it in the main libvirt binary rpm
2009-12-22 12:09:56 +01:00
Mark McLoughlin
3b3305d859 remove all traces of lokkit support
Long ago we tried to use Fedora's lokkit utility in order to register
our iptables rules so that 'service iptables restart' would
automatically load our rules.

There was one fatal flaw - if the user had configured iptables without
lokkit, then we would clobber that configuration by running lokkit.

We quickly disabled lokkit support, but never removed it. Let's do
that now.

The 'my virtual network stops working when I restart iptables' still
remains. For all the background on this saga, see:

  https://bugzilla.redhat.com/227011

* src/util/iptables.c: remove lokkit support

* configure.in: remove --enable-lokkit

* libvirt.spec.in: remove the dirs used only for saving rules for lokkit

* src/Makefile.am: ditto

* src/libvirt_private.syms, src/network/bridge_driver.c,
  src/util/iptables.h: remove references to iptablesSaveRules
2009-12-10 11:27:17 +00:00
Daniel P. Berrange
9428f2ced6 Introduce a simple API for handling JSON data
This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc).  There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.

This uses the YAJL library for parsing/formatting from

 http://lloyd.github.com/yajl/

* src/util/json.h, src/util/json.c: Data structures and APIs
  for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers
2009-12-07 14:14:36 +00:00
Daniel Veillard
040e80f7e6 Release of libvirt-0.7.4
0.7.3 was broken

* configure.in docs/news.html.in: release of 0.7.4
* configure.in libvirt.spec.in: require netcf >= 0.1.4
* src/Makefile.am: node_device/node_device_udev.h was missing from
  NODE_DEVICE_DRIVER_UDEV_SOURCES breaking compilation on platforms with
  udev
2009-11-20 19:43:59 +01:00
Daniel Veillard
b8d4b6bec9 Release of libvirt-0.7.3
* configure.in docs/news.html.in libvirt.spec.in: describe new release
* po/*.po*: regenerate
2009-11-20 17:31:13 +01:00
Daniel P. Berrange
4811fab790 Enable udev instead of hal on F12 / RHEL-6 or later
HAL has been deprecated since F12 and RHEL-6, so if building on
these platforms, switch on the udev driver instead

* libvirt.spec.in: Activate udev on F12/RHEL6
2009-11-20 16:45:46 +01:00
Daniel P. Berrange
3c3dffc285 Exclude numactl on s390[x]
The numactl package is not applicable for s390[x] arches, so do
not enable it as a build dep.

* libvirt.spec.in: Exclude numactl on s390[x]
2009-11-12 11:17:29 +00:00
Laine Stump
753c6c9c75 Support reporting live interface IP/netmask
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than  reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.

* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
  update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
  adds the inactive flag for interface dump
2009-11-03 21:04:56 +01:00
Mark McLoughlin
1acef95a81 libvirt-devel should only require libvirt-client
There's a long known issue where if you install libvirt in a guest,
the default virtual network will conflict with the default virtual
network in the host.

That's one of the reasons we have the libvirt-client RPM - it allows
you to install the client library without having the host side
installed.

Rich Jones points out that if you install libvirt-devel in a guest,
then you get libvirtd installed and the network conflict:

  https://bugzilla.redhat.com/531200

libvirt-devel should only require libvirt-client - e.g. nothing in
the devel package pertains to anything in the libvirt RPM. The Fedora
packaging guidelines say:

  https://fedoraproject.org/wiki/Packaging/Guidelines#Devel_Packages

  Devel packages must require the base package using a fully versioned
  dependency ...

But for all intents and purposes, libvirt-client is our base RPM.

* libvirt.spec.in: make libvirt-devel require libvirt-client
2009-10-28 17:23:34 +00:00
Daniel Veillard
7c39e4f885 Fix a missing % on endif in spec file
* libvirt.spec.in: missing % broke 'make rpm'
2009-10-13 16:18:45 +02:00
Amy Griffis
e1a2fe6af2 LXC add augeas support for config file
* src/lxc/libvirtd_lxc.aug src/lxc/test_libvirtd_lxc.aug: augeas schemas
  for lxc.conf
* src/Makefile.am libvirt.spec.in: glue the new augeas files in
2009-10-08 18:06:40 +02:00
Amy Griffis
2dd44664cf LXC add driver config file lxc.conf
* src/lxc/lxc.conf: new configuration file, there is currently one
  tunable "log_with_libvirtd" that controls whether an lxc controller will
  log only to the container log file, or whether it will honor libvirtd's
  log output configuration. This provides a way to have libvirtd and its
  children log to a single file.  The default is to log to the container
  log file.
* src/Makefile.am libvirt.spec.in: add the new file
* src/lxc/lxc_conf.[ch] src/lxc/lxc_driver.c: read the new log value
  from the configuration file and pass the log informations when
  starting up a container.
2009-10-08 17:40:14 +02:00
Mark McLoughlin
d285084b12 Create /var/log/libvirt/{lxc,uml} dirs
Otherwise logrotate barfs:

  error: error accessing /var/log/libvirt/uml: No such file or directory
  error: libvirtd:1 glob failed for /var/log/libvirt/uml/*.log
  error: found error in /var/log/libvirt/qemu/*.log /var/log/libvirt/uml/*.log /var/log/libvirt/lxc/*.log , skipping

* qemud/Makefile.am: always create /var/log/libvirt/{lxc,uml} when
  installing the logrotate conf; not ideal, but easier than making
  the logrotate conf depend on which drivers are enabled
2009-10-06 13:49:35 +01:00
Daniel Veillard
553f31c579 Fix a few 'make rpm' breakages
* Makefile.am: examples/domain-events/events-python should be added
  to dist tarball
* libvirt.spec.in: there is no makefile in domain-events but in
  domain-events/events-c and python/libvirtclass.txt has vanished
2009-09-30 16:20:25 +02:00
Chris Lalancette
47c8709564 Fix up a few typos in the tree.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-09-30 14:05:24 +02:00
Daniel P. Berrange
323ad539bb Don't require full daemon install for libvirt python bindings
* libvirt.spec.in: libvirt-python only needs to depend on
  libvirt-clients
2009-09-28 14:14:43 +01:00
Daniel P. Berrange
cf5fa06c8d Tweak specfile to fix RHEL6 rules & ESX/PHYP enablement
* libvirt.spec.in: ESX/PHYP drivers do not require libvirtd.
  RHEL-6 should include LXC on all arches
2009-09-21 15:24:08 +01:00
Daniel P. Berrange
13f59ad733 Move example XML files into examples/xml
* docs/storage/: Move to examples/xml/storage/
* docs/test*.xml: Move to examples/xml/test/
* docs/Makefile.am: Remove example XML files from dist
* Makefile.am: Add examples/xml to EXTRA_DIST
* tests/virshtest.c: Update for moved test XML
* libvirt.spec.in: Include example XML files as docs
* tests/int-overflow: UPdate for moved XML
2009-09-21 14:41:48 +01:00
Daniel P. Berrange
3decd4f9f1 Make pki_check.sh into an installed & supported tool
* docs/pki_check.sh: Move to tool/virt-pki-validate.in and add
  in POD man page documentation
* tools/.gitignore: Ignore generated virt-pki-validate file
* tools/Makefile.am: Install & build virt-pki-validate and
  virt-pki-validate.1
* docs/remote.html, docs/remote.html.in: Refer to new tool
  name virt-pki-validate
* libvirt.spec.in, mingw32-libvirt.spec.in: Add virt-pki-validate
  and virt-pki-validate.1 to files list
2009-09-21 14:41:46 +01:00
Daniel P. Berrange
cebeba7bd7 Move docs/examples into examples/
* Makefile.am: Add examples/dominfo examples/domsuspend examples/python
  as SUBDIRS
* configure.in: Update AC_OUTPUT for new/old Makefiles
* docs/Makefile.am: Remove examples from SUBDIRS
* docs/examples/info1.c: Move to examples/dominfo/info1.c
* docs/examples/suspend.c: Move to examples/domsuspend/suspend.c
* docs/examples: Remove all remaining files
* docs/examples/python: Moved to examples/python/
* examples/dominfo/Makefile.am, examples/domsuspend/Makefile.am: New
  build files
* libvirt.spec.in: Update to take account of moved examples
2009-09-21 14:41:46 +01:00
Daniel P. Berrange
fd5c9bb9ab Refactor libvirt.spec to allow client-only builds
Some architectures in certain RHEL versions do not include any
hypervisors. Update the specfile to allow those to easily build
a remote client only version of libvirt. ie no libvirtd related
bits at all.

* qemud/Makefile.am: Always instal SASL config since its needed
  by client too
* libvirt.spec.in: Re-factor specfile conditionals to allow entire
  server side build to be disabled easily, eg a remote client only
  build. Make RHEL-5 do client only build for s390/ppc. Make RHEL-6
  do a client only build for all non-x86_64 archs. Enable LXC on
  RHEL-6. Enable all Fedora >= 6 features on RHEL-6 too. Add some
  more conditionals around dnsmasq/iptables/hal Requires tags.
  Add missing e2fsprogs-devel BR for RHEL-5 as workaround for broken
  parted. Fix the device mapper BR for RHEL-5. Add conditional rules
  for ESX build. Add conditional rules for SELinux + HAL builds.
  Fix a mistaken %{with_qemu} to be %{with_network} when setting
  up default network XML
2009-09-21 14:41:42 +01:00
Daniel Veillard
c4f6e80671 Release of libvirt 0.7.1
* configure.in docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
  updates to new release
* NEWS docs/devhelp/libvirt-libvirt.html docs/html/libvirt-libvirt.html
  docs/libvirt-api.xml docs/libvirt-refs.xml docs/news.html
  include/libvirt/libvirt.h: regenerated
2009-09-15 14:24:51 +02:00
Daniel P. Berrange
fb01a107c5 Restart libvirtd upon RPM upgrade
* libvirt.spec.in: Restart libvirtd in %post
2009-09-14 13:42:18 +01:00
Charles Duffy
8d4ed2ad3d Reintroduce support for lzop compression
lzop was removed due to some confusion over whether it provided functional
advantages distinct from xz. This has been addressed in the mailing list post
archived at http://permalink.gmane.org/gmane.comp.emulators.libvirt/16487, and
support for lzop is re-added here.

* libvirt.spec.in: add dependancy on lzop
* src/qemu.conf: update documentation of save_image_format
* src/qemu_driver.c: re-add lzop compression option
2009-09-10 11:13:33 +02:00
Daniel Veillard
c5a305584f Deprecate lzma and lzop in favor of xz, add dep
* src/qemu_driver.c: drop lzma and lzop images compression options
  as they are deprecated by xz
* libvirt.spec.in: add requires for xz/bzip2/gzip as they are needed
  to implement the compression options
2009-09-09 16:44:44 +02:00
Daniel Veillard
f54de34ba4 Add flags and requires for Multipath storage
* libvirt.spec.in: the new multipath module requires device-mapper
  and device-mapper-devel for build
2009-09-08 16:07:54 +02:00
Daniel Veillard
91c7bf659b PHYP driver cleanups
* libvirt.spec.in: activate phyp and fix the BuildDep to libssh2-devel
* src/phyp/phyp_driver.c: fix a debug macro to use the normal logging API
2009-09-04 14:03:45 +02:00
Daniel P. Berrange
182a80b922 Move QEMU monitor socket in /var/lib/libvirt/qemu
Separate the guest created QEMU monitor socket location
from the libvirtd create XML / PID data files, to improve
security separation when running QEMU non-root

* libvirt.spec.in: Leave /var/run/libvirt/qemu as root:root
* src/qemu_conf.h: Add libDir and cacheDir directory paths
* src/qemu_driver.c: Move QEMU monitor socket from
  stateDir to libDir to avoid making security critical directory
  accessible to QEMU guests.
* src/util.c: Delay running hook till after damonizing to
  ensure pidfile is still written before changing UID/GID
2009-09-03 18:10:16 +01:00
Daniel P. Berrange
6a035507fd Only add glusterfs dep for Fedora >= 11
* libvirt.spec.in: Conditionalize glusterfs requires line for
  Fedora >= 11, since other distros don't have it available
2009-09-01 21:19:38 +01:00
Miloslav Trmač
05b9b8fda3 Add volume encryption information handling.
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).

Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.

Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.

This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.

* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
  Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
  Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
  helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
  RNG schema
2009-09-01 18:27:28 +01:00
Miloslav Trmač
6acc17af8c Secret manipulation public API
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.

* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
  schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
  describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
  API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
  files list
2009-09-01 17:38:52 +01:00
Daniel P. Berrange
8e06c8b3da Support new PolicyKit 1.0 API
* configure.in: Check for pkcheck which indicates new policykit
* qemud/Makefile.am: Install different versions of policy
* qemud/libvirtd.policy: Rename to libvirtd.policy-0
* qemud/libvirtd.policy-1: new style policy
* qemud/qemud.c, qemud/qemud.h, qemud/remote.c: Support new
  policykit API via external pkcheck helper
* src/remote_internal.c: Don't prompt for polkit auth with new
  policykit API
* libvirt.spec.in: deal with new policy install locations & deps
2009-08-25 11:59:14 +01:00
Mark McLoughlin
ce1783ccc1 spec file: add URL to Source tag
See https://fedoraproject.org/wiki/Packaging:SourceURL
2009-08-21 11:10:37 +01:00
Mark McLoughlin
f9bfa10797 Set perms on /var/lib/libvirt/boot to 0711
Allow qemu user to open kernel/initrds in this dir, but still prevent
others from listing it.

* libvirt.spec.in: set /var/lib/libvirt/boot perms to 0711
2009-08-10 09:00:02 +01:00
Daniel Veillard
22a5ebe44b Release of libvirt-0.7.0
* configure.in NEWS docs/* libvirt.spec.in include/libvirt/libvirt.h:
  Release of 0.7.0
* po/*.po*: updated and regenerated the localization pool
2009-08-05 16:00:41 +02:00
Mark McLoughlin
f4e7157716 Set perms on /var/lib/libvirt/images to 0711
Allow qemu user to open images in this dir, but still prevent others
from listing it.

* libvirt.spec.in: set /var/lib/libvirt/images perms to 0711
2009-07-31 09:52:24 +01:00
Daniel P. Berrange
eb78ccf391 Fix RPM upgrades from F11 to F12
* libvirt.spec.in: Create qemu/kvm user/group in %pre script
2009-07-30 12:26:58 +01:00
Mark McLoughlin
a8e34e298e Fix polkit/netcf disabling on older fedoras
polkit was disabled by default for a reason - because we selectively
enable it on newer fedoras rather than disable it on older fedoras

Same fix needed for netcf
2009-07-29 10:05:39 +01:00
Mark McLoughlin
181c80d6eb Capilize libvirt-client summary
Fixes:

  W: summary-not-capitalized client side library and utilities of the libvirt library
2009-07-29 09:57:24 +01:00
Mark McLoughlin
56d672afeb Move ldconfig calls to libvirt-client %post/%postun
Now that the library has moved to libvirt-client
2009-07-29 09:55:43 +01:00
Mark McLoughlin
adefc3955b No need to build require both python-devel and python
Since python-devel requires python

Pointed out by Itamar Reis Peixoto
2009-07-29 08:59:44 +01:00
Mark McLoughlin
09a40ab471 Remove executable perms from /etc/sysconfig/libvirtd
Changed by Rich Jones for:

  libvirt.x86_64: E: executable-marked-as-config-file /etc/sysconfig/libvirtd

See:

  https://bugzilla.redhat.com/226055
2009-07-29 08:45:25 +01:00
Mark McLoughlin
70a339970c Use a %postun -p for one line scriptlet
Changed by Rich Jones, presumably for this:

  libvirt.x86_64: W: one-line-command-in-%postun /sbin/ldconfig

see:

  https://bugzilla.redhat.com/226055
2009-07-29 08:45:25 +01:00
Mark McLoughlin
f69b841d2b Don't explicitly require libxml2
Originally done by rjones as part of this package review:

  https://bugzilla.redhat.com/226055
2009-07-29 08:45:24 +01:00
Mark McLoughlin
4f377369a8 Fix some unowned directories
danpb's fix for:

  https://bugzilla.redhat.com/483442
2009-07-28 19:29:59 +01:00
Mark McLoughlin
86823575fd Kill qemu BuildRequires
It's not needed at build time

Removed in Fedora by:

  * Fri Jun  5 2009 Mark McLoughlin <markmc@redhat.com> - 0.6.4-2.fc12
  - Remove the qemu BuildRequires
2009-07-28 19:29:59 +01:00
Mark McLoughlin
69a0f3ee23 Enable netcf by default
Disabled on < f12 for now until netcf is in Fedora updates

BuildRequires netcf if enabled, pass --without-netcf if its disabled

* libvirt.spec.in: enabled netcf by default
2009-07-28 19:29:59 +01:00
Mark McLoughlin
6a9948c018 Default to with_polkit
Unless there's some reason we shouldn't
2009-07-28 19:29:59 +01:00
Mark McLoughlin
e3f0cae719 Make vbox support configurable
Added by DV with:

  * Fri Apr 24 2009 Daniel Veillard <veillard@redhat.com> - 0.6.3-1.fc12
  - release of 0.6.3
  - VirtualBox driver
2009-07-28 19:29:59 +01:00
Mark McLoughlin
7311161340 Build with --without-capng if capng is disabled
* libvirt.spec: pass --without-capng if appropriate
2009-07-28 19:29:59 +01:00