Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
Since the ESX storage implements VMFS and iSCSI storage backends and
chooses relevant backend dynamically at runtime, there was a segfault
when issuing vol-info on iSCSI volume due to unimplemented
virStorageGetInfo function. This patch implements that function that was
missing in iSCSI backend and returns expected result without a segfault.
One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile. As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file. This sets up the fields for
the tracking, although it does not modify XML to display any
new information.
* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.
Part of a series of cleanups to use new accessor methods.
* src/esx/esx_driver.c (esxAutodetectSCSIControllerModel)
(esxDomainDefineXML): Use accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.
Found by:
git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:
<seclabel type='dynamic' model='selinux' relabel='yes'/>
Erroring with:
$ sudo virsh domxml-to-native qemu-argv f
error: XML error: security label is missing
All drivers are fixed, but only qemu was tested.
The make inserts six spaces instead of four:
GEN access/viraccessapichecklxc.h
GEN hyperv/hyperv_wmi.generated.h
GEN access/viraccessapichecklxc.c
GEN hyperv/hyperv_wmi.generated.c
GEN hyperv/hyperv_wmi_classes.generated.typedef
GEN hyperv/hyperv_wmi_classes.generated.h
GEN hyperv/hyperv_wmi_classes.generated.c
GEN libvirt_access_qemu.xml
GEN libvirt_access.syms
GEN libvirt_access_lxc.xml
GEN libvirt_access_qemu.syms
GEN libvirt_access_lxc.syms
GEN libvirt_qemu.def
GEN esx/esx_vi_types.generated.typedef
GEN esx/esx_vi_types.generated.typeenum
GEN esx/esx_vi_types.generated.typetostring
GEN esx/esx_vi_types.generated.typefromstring
GEN esx/esx_vi_types.generated.h
GEN esx/esx_vi_types.generated.c
GEN esx/esx_vi_methods.generated.h
GEN esx/esx_vi_methods.generated.c
GEN esx/esx_vi_methods.generated.macro
GEN esx/esx_vi.generated.h
GEN esx/esx_vi.generated.c
GEN libvirt_lxc.def
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Code cleanup: remove explicit NULL comparisons like ptr == NULL and
ptr != NULL from the ESX code, replacing them with the simpler ptr
and !ptr.
Part three of three.
Code cleanup: remove explicit NULL comparisons like ptr == NULL and
ptr != NULL from the ESX code, replacing them with the simpler ptr
and !ptr.
Part two of three.
Code cleanup: remove explicit NULL comparisons like ptr == NULL and
ptr != NULL from the ESX code, replacing them with the simpler ptr
and !ptr.
Part one of three.
The ESX code has a method esxVI_Alloc which would call
virAllocN directly, instead of using the VIR_ALLOC_N
macro. Remove this method and make the callers just
use VIR_ALLOC as is normal practice.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New coverity installation determined that the muliple if condition for
"*Alloc" and "*AppendToList" could fail during AppendToList thus leaking
memory.
Add support for creating disk-only (no memory) snapshots in esx, and
for quiescing the VM before taking the snapshot. The VMware API
supports these operations directly, so adding support to libvirt is
just a matter of setting the flags correctly when calling
VMware. VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY and
VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE are now valid flags for esx.
Signed-off-by: Eric Blake <eblake@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
VI objects support inheritance with subtype polymorphism. For example the
FileInfo object type is extended by FloppyImageFileInfo, FolderFileInfo
etc. Then SearchDatastore_Task returns an array of FileInfo objects and
depending on the represented file the FileInfo is actually a FolderFileInfo
or FloppyImageFileInfo etc. The actual type information is stored as XML
attribute that allows clients such as libvirt to distinguish between the
actual types. esxVI_GetActualObjectType is used to extract the actual type.
I assumed that this mechanism would be used for all VI object types that
have subtypes. But this is not the case. It seems only to be used for types
that are actually used as generic base type such as FileInfo. But it is not
used for types that got extended later such as ElementDescription that was
extended by ExtendedElementDescription (added in vSphere API 4.0) or that
are not meant to be used with subtype polymorphism.
This breaks the deserialization of types that contain ElementDescription
properties such as PerfCounterInfo or ChoiceOption, because the code
expects an ElementDescription object to have an XML attribute named type
that is not present, since ExtendedElementDescription was added to the
esx_vi_generator.input in commit 60f0f55ee4.
This in turn break virtual machine question handling and auto answering.
Fix this by using the base type if no XML type attribute is present.
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
The previous update of method naming missed the ESX storage
backend files. Update them is that the driver impl methods
follow the naming of the public API but with s/vir/esx/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Python code generator "generate_source" section that handles
code generation to "free" inherited objects needs to generate
DISPATCH_FREE calls for all extended_by objects.
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.
A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.
Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 4445e16bfa changed the signature
of esxConnectToHost and esxConnectToVCenter by replacing the esxPrivate
pointer with virConnectPtr. The esxPrivate pointer was then retrieved
again from virConnectPtr's privateData. This resulted in a NULL pointer
dereference, because the privateData pointer was not yet initialized at
the point where esxConnectToHost and esxConnectToVCenter are called.
This was fixed in commit b126715a48 that
moved the initialization of privateData before the problematic calls.
Simplify the logic by making the call to esxFreePrivate unconditional and
changing esxConnectToHost and esxConnectToVCenter back to take a esxPrivate
pointer directly. This allows to assign esxPrivate to the virConnectPtr's
privateData pointer as one of the last steps in esxOpen making it more
obvious that it is not initialized during the earlier steps of esxOpen.
Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The attributes of a <network> element's <forward> element were
previously stored directly in the virNetworkDef object, but
virNetworkUpdateForward() needs to operate on a <forward> in
isolation, so this patchs pulls out all those attributes into a
separate virNetworkForwardDef struct (and shortens their names
appropriately). This new object is contained in the virNetworkDef, not
pointed to by it, so there is no extra memory management.
This patch makes no functional changes, it only changes, e.g.,
"nForwardIfs" to "forward.nifs".
The patch adds the backend driver to support iSCSI format storage pools
and volumes for ESX host. The mapping of ESX iSCSI specifics to Libvirt
is as follows:
1. ESX static iSCSI target <------> Libvirt Storage Pools
2. ESX iSCSI LUNs <------> Libvirt Storage Volumes.
The above understanding is based on http://libvirt.org/storage.html.
The operation supported on iSCSI pools includes:
1. List storage pools & volumes.
2. Get XML descriptor operaion on pools & volumes.
3. Lookup operation on pools & volumes by name, UUID and path (if applicable).
iSCSI pools does not support operations such as: Create / remove pools
and volumes.
The patch refactors the current ESX storage driver due to following reasons:
1. Given most of the public APIs exposed by the storage driver in Libvirt
remains same, ESX storage driver should not implement logic specific
for only one supported format (current implementation only supports VMFS).
2. Decoupling interface from specific storage implementation gives us an
extensible design to hook implementation for other supported storage
formats.
This patch refactors the current driver to implement it as a facade pattern i.e.
the driver exposes all the public libvirt APIs, but uses backend drivers to get
the required task done. The backend drivers provide implementation specific to
the type of storage device.
File changes:
------------------
esx_storage_driver.c ----> esx_storage_driver.c (base storage driver)
|
|---> esx_storage_backend_vmfs.c (VMFS backend)
This will simplify the refactoring of the ESX storage driver to support
a VMFS and an iSCSI backend.
One of the tasks the storage driver needs to do is to decide which backend
driver needs to be invoked for a given request. This approach extends
virStoragePool and virStorageVol to store extra parameters:
1. privateData: stores pointer to respective backend storage driver.
2. privateDataFreeFunc: stores cleanup function pointer.
virGetStoragePool and virGetStorageVol are modfied to accept these extra
parameters as user params. virStoragePoolDispose and virStorageVolDispose
checks for cleanup operation if available.
The private data pointer allows the ESX storage driver to store a pointer
to the used backend with each storage pool and volume. This avoids the need
to detect the correct backend in each storage driver function call.
For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.
Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.
Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.
N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
After the connection to ESX 5.1 being broken since g1e7cd39, the fix
in bab7752c helped a bit, but still missed a spot, so the connection
is now successful, but some APIs (for example defineXML) don't work.
Two cases missing are added in this patch to avoid that.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After separating 5.x and 5.1 versions of ESX, we forgot to add 5.1
into the list of allowed connections, so connections to 5.1 fail since
v1.0.0-rc1-5-g1e7cd39
Also remove warnings for upcoming versions. There hadn't been any
compatibility problems with new ESX version over the whole lifetime
of the ESX driver, so I don't expect any in the future.
Update documentation to mention vSphere 5.x support.
Traverse the whole inheritance hierarchy for dynamic dispatch as it is
already done for the dynamic cast.
Also make AnyType cast errors more verbose.
Reported by Ata Bohra.
libcurl uses a SIGALRM in combination with sigsetjmp/siglongjmp to be
able to abort a DNS lookup when it takes too long. The problem with this
in a multi-threaded application is that the signal handler for SIGALRM
and the call to siglongjmp can be executed on a thread that is different
from the one that initially did the SIGALRM setup and the call to
sigsetjmp. In the reported case this triggered a segfault.
Disable libcurl's use of signals to avoid this situation. This has the
disadvantage of losing the ability to abort synchronous DNS lookups which
might result in libcurl getting stuck in a DNS lookup in the worst case.
When libcurl was build with an asynchronous DNS backend such as c-ares
then there is no problem because the timeout mechanism works without
signals here anyway.
Reported by Benjamin Wang.
Avoid requesting information such as identity or power state when it
is not necessary.
Lookup virtual machine list with the required fields (configStatus,
name, and config.uuid) to make esxVI_GetVirtualMachineIdentity work.
No need to call esxVI_GetNumberOfSnapshotTrees. rootSnapshotTreeList
can be tested for emptiness by checking it for NULL.
esxVI_LookupRootSnapshotTreeList already does the error reporting,
don't overwrite it.
Check if autostart is enabled at all before looking up the individual
autostart setting of a virtual machine.
Reorder VIR_EXPAND_N(doms, ndoms, 1) to avoid leaking the result of
the call to virGetDomain if VIR_EXPAND_N fails.
Replace VIR_EXPAND_N by VIR_RESIZE_N to avoid quadratic scaling, as in
the Hyper-V version of the function.
If virGetDomain fails it already reports an error, don't overwrite it
with an OOM error.
All items in doms up to the count-th one are valid, no need to double
check before freeing them.
Finally, don't leak autoStartDefaults and powerInfoList.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
ESX doesn't use the common virDomainObj implementation so this patch
adds a separate implementation.
This driver supports all currently defined filtering flags, but as with
other drivers some combinations yield a empty result list.
This has several benefits:
1. Future snapshot-related code has a definite place to go (and I
_will_ be adding some)
2. Snapshot errors now use the VIR_FROM_DOMAIN_SNAPSHOT error
classification, which has been underutilized (previously only in
libvirt.c)
* src/conf/domain_conf.h, domain_conf.c: Split...
* src/conf/snapshot_conf.h, snapshot_conf.c: ...into new files.
* src/Makefile.am (DOMAIN_CONF_SOURCES): Build new files.
* po/POTFILES.in: Mark new file for translation.
* src/vbox/vbox_tmpl.c: Update caller.
* src/esx/esx_driver.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_domain.h: Likewise.
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
An ESX server has one or more PhysicalNics that represent the actual
hardware NICs. Those can be listed via the interface driver.
A libvirt virtual network is mapped to a HostVirtualSwitch. On the
physical side a HostVirtualSwitch can be connected to PhysicalNics.
On the virtual side a HostVirtualSwitch has HostPortGroups that are
mapped to libvirt virtual network's portgroups. Typically there is
HostPortGroups named 'VM Network' that is used to connect virtual
machines to a HostVirtualSwitch. A second HostPortGroup typically
named 'Management Network' is used to connect the hypervisor itself
to the HostVirtualSwitch. This one is not mapped to a libvirt virtual
network's portgroup. There can be more HostPortGroups than those
typical two on a HostVirtualSwitch.
+---------------+-------------------+
...---| | | +-------------+
| HostPortGroup | |---| PhysicalNic |
| VM Network | | | vmnic0 |
...---| | | +-------------+
+---------------+ HostVirtualSwitch |
| vSwitch0 |
+---------------+ |
| HostPortGroup | |
...---| Management | |
| Network | |
+---------------+-------------------+
The virtual counterparts of the PhysicalNic is the HostVirtualNic for
the hypervisor and the VirtualEthernetCard for the virtual machines
that are grouped into HostPortGroups.
+---------------------+ +---------------+---...
| VirtualEthernetCard |---| |
+---------------------+ | HostPortGroup |
+---------------------+ | VM Network |
| VirtualEthernetCard |---| |
+---------------------+ +---------------+
|
+---------------+
+---------------------+ | HostPortGroup |
| HostVirtualNic |---| Management |
+---------------------+ | Network |
+---------------+---...
The currently implemented network driver can list, define and undefine
HostVirtualSwitches including HostPortGroups for virtual machines.
Existing HostVirtualSwitches cannot be edited yet. This will be added
in a followup patch.
esxVI_LookupHostSystemProperties guarantees that hostSystem is non-NULL.
Remove redundant NULL checks from callers.
Also prefer esxVI_GetStringValue over open-coding the logic.
The static deep copy allocates storage for the copy. The dynamic
version injected the dynamic dispatch after the allocation. This
triggered the invalid argument check in the dynamically dispatched
deep copy call. The deep copy function expects its dest parameter
to be a pointer to a NULL-pointer. This expectation wasn't met due
to the dispatching deep copy doing the allocation before the call.
Fix this by dynamically dispatching to the correct type before the
allocation.
Lists available PhysicalNic devices. A PhysicalNic is always active
and can neither be defined nor undefined.
A PhysicalNic is used to bridge a HostVirtualSwitch to the physical
network.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Fix addresses two issues:
1. Fix generator code to allow deep copy operation for objects with
Dynamic_Cast capabilities.
2. Add missing deep copy routine to Long datatype.
Signed-off-by: Ata E Husain Bohra <ata.husain@hotmail.com>
Update the ESX driver to use virReportError instead of
the ESX_ERROR & ESX_VI_ERROR custom macros
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It was broken since forever as it expected a libxml2
XML_ELEMENT_NODE containing a XML_TEXT_NODE instead of
just a XML_TEXT_NODE.
This problem was not discovered for so long because
esxVI_String_Deserialize was not used until now.
Reported by Ata Bohra
The two new APIs are rather trivial; based on bits and pieces of
other existing APIs. But rather than blindly return 0 or 1 for
HasMetadata, I chose to first validate that the snapshot in
question in fact exists.
* src/esx/esx_driver.c (esxDomainSnapshotIsCurrent)
(esxDomainSnapshotHasMetadata): New functions.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotIsCurrent)
(vboxDomainSnapshotHasMetadata): Likewise.
Blindly returning success is misleading if the object no longer
exists; it is a bit better to check for existence up front before
returning information about that object. This pattern matches the
fact that most of our other APIs check for existence as a side
effect prior to getting at the real piece of information being
queried.
* src/esx/esx_driver.c (esxDomainIsUpdated, esxDomainIsPersistent):
Add existence checks.
* src/vbox/vbox_tmpl.c (vboxDomainIsPersistent)
(vboxDomainIsUpdated): Likewise.
Appending an item to a list transfers ownership of that item to the
list owner. But an error can occur in between item allocation and
appending it to the list. In this case the item has to be freed
explicitly. This was not done in some special cases resulting in
possible memory leaks.
Reported by Coverity.
The current storage pools for NFS and iSCSI only require one host to
connect to. Future storage pools like RBD and Sheepdog will require
multiple hosts.
This patch allows multiple source hosts and rewrites the current
storage drivers.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When SASL requests auth credentials, try to look them up in the
config file first. If any are found, remove them from the list
that the user is prompted for
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the functions in virauth.h have names matching the file
prefix, by renaming virRequest{Username,Password} to
virAuthGet{Username,Password}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To follow latest naming conventions, rename src/util/authhelper.[ch]
to src/util/virauth.[ch].
* src/util/authhelper.[ch]: Rename to src/util/virauth.[ch]
* src/esx/esx_driver.c, src/hyperv/hyperv_driver.c,
src/phyp/phyp_driver.c, src/xenapi/xenapi_driver.c: Update
for renamed include files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert drivers currently using the qparams APIs, to instead
use the virURIPtr query parameters directly.
* src/esx/esx_util.c, src/hyperv/hyperv_util.c,
src/remote/remote_driver.c, src/xenapi/xenapi_utils.c: Remove
use of qparams
* src/util/qparams.h, src/util/qparams.c: Delete
* src/Makefile.am, src/libvirt_private.syms: Remove qparams
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of just typedef'ing the xmlURIPtr struct for virURIPtr,
use a custom libvirt struct. This allows us to fix various
problems with libxml2. This initially just fixes the query vs
query_raw handling problems.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr
* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.
This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).
* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.
File changes:
- src/util/viruri.h -- declaration
- src/util/viruri.c -- definition
- src/libvirt_private.syms -- symbol export
- src/Makefile.am -- added source and header files
- cfg.mk -- added sc_prohibit_xmlURI
- all others -- ID name and include fixes
Adding "Expect:" to the header list stops libcurl from sending a
Expect header at all.
Before, a dummy Expect header was added that might confuse HTTP
proxies and result in HTTP error code 417 being reported.
Unlike .cvsignore under CVS, git allows for ignoring nested
names. We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.
* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
Add a new API virDomainShutdownFlags and define:
VIR_DOMAIN_SHUTDOWN_DEFAULT = 0,
VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_SHUTDOWN_GUEST_AGENT = (1 << 1),
Also define some flags for the reboot API
VIR_DOMAIN_REBOOT_DEFAULT = 0,
VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
VIR_DOMAIN_REBOOT_GUEST_AGENT = (1 << 1),
Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.
Add stub impls of the new API for all existing drivers
Reusing common code makes things smaller; it also buys us some
additional safety, such as now rejecting duplicate parameters
during a set operation.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters)
(qemuDomainSetMemoryParameters, qemuDomainSetNumaParameters)
(qemuSetSchedulerParametersFlags)
(qemuDomainSetInterfaceParameters, qemuDomainSetBlockIoTune)
(qemuDomainGetBlkioParameters, qemuDomainGetMemoryParameters)
(qemuDomainGetNumaParameters, qemuGetSchedulerParametersFlags)
(qemuDomainBlockStatsFlags, qemuDomainGetInterfaceParameters)
(qemuDomainGetBlockIoTune): Use new helpers.
* src/esx/esx_driver.c (esxDomainSetSchedulerParametersFlags)
(esxDomainSetMemoryParameters)
(esxDomainGetSchedulerParametersFlags)
(esxDomainGetMemoryParameters): Likewise.
* src/libxl/libxl_driver.c
(libxlDomainSetSchedulerParametersFlags)
(libxlDomainGetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcDomainSetMemoryParameters)
(lxcSetSchedulerParametersFlags, lxcDomainSetBlkioParameters)
(lxcDomainGetMemoryParameters, lxcGetSchedulerParametersFlags)
(lxcDomainGetBlkioParameters): Likewise.
* src/test/test_driver.c (testDomainSetSchedulerParamsFlags)
(testDomainGetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorSetSchedulerParameters)
(xenHypervisorGetSchedulerParameters): Likewise.
https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a
misuse of 'an' where 'a' is proper; that has since been fixed,
but a search found other problems (some were a spelling error for
'and', while most were fixed by 'a').
* daemon/stream.c: Fix grammar.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_event.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_vi.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* src/rpc/virnetserverprogram.c: Likewise.
* src/storage/storage_backend_fs.c: Likewise.
* src/util/conf.c: Likewise.
* src/util/dnsmasq.c: Likewise.
* src/util/iptables.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* tools/virsh.c: Likewise.
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
The default console type may vary based on the OS type. ie a Xen
paravirt guests wants a 'xen' console, while a fullvirt guests
wants a 'serial' console.
A plain integer default console type in the capabilities does
not suffice. Instead introduce a callback that is passed the
OS type.
* src/conf/capabilities.h: Use a callback for default console
type
* src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback
for default console type. Add missing LXC/OpenVZ console types.
* src/esx/esx_driver.c, src/libxl/libxl_conf.c,
src/lxc/lxc_conf.c, src/openvz/openvz_conf.c,
src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c,
src/uml/uml_conf.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c,
src/xenapi/xenapi_driver.c: Set default console type callback
Allow the user to call with nparams too small, per API documentation.
* src/esx/esx_driver.c (esxDomainGetMemoryParameters): Drop
redundant check.
(esxDomainGetSchedulerParametersFlags): Allow fewer than max.
Document the parameter names that will be used by
virDomain{Get,Set}SchedulerParameters{,Flags}, rather than
hard-coding those names in each driver, to match what is
done with memory, blkio, and blockstats parameters.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SCHEDULER_CPU_SHARES)
(VIR_DOMAIN_SCHEDULER_VCPU_PERIOD)
(VIR_DOMAIN_SCHEDULER_VCPU_QUOTA, VIR_DOMAIN_SCHEDULER_WEIGHT)
(VIR_DOMAIN_SCHEDULER_CAP, VIR_DOMAIN_SCHEDULER_RESERVATION)
(VIR_DOMAIN_SCHEDULER_LIMIT, VIR_DOMAIN_SCHEDULER_SHARES): New
field name macros.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Use new defines.
* src/test/test_driver.c (testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetSchedulerParameters)
(xenHypervisorSetSchedulerParameters): Likewise.
* src/xen/xend_internal.c (xenDaemonGetSchedulerParameters)
(xenDaemonSetSchedulerParameters): Likewise.
* src/lxc/lxc_driver.c (lxcSetSchedulerParametersFlags)
(lxcGetSchedulerParametersFlags): Likewise.
* src/esx/esx_driver.c (esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
Allow the datacenter and compute resource parts of the path
to be prefixed with folders. Therefore, the way the path is
parsed has changed. Before, it was split in 2 or 3 items and
the items' meanings were determined by their positions. Now
the path can have 2 or more items and the the vCenter server
is asked whether a folder, datacenter of compute resource
with the specified name exists at the current hierarchy level.
Before the datacenter and compute resource lookup automatically
traversed folders during lookup. This is logic got removed
and folders have to be specified explicitly.
The proper datacenter path including folders is now used when
accessing a datastore over HTTPS. This makes virsh dumpxml
and define work for datacenters in folders.
https://bugzilla.redhat.com/show_bug.cgi?id=732676
Coverity detected that the only way to get to the cleanup label
is if objectSpec had been successfully allocated, so the null
check was dead code.
* src/esx/esx_vi.c (esxVI_LookupObjectContentByType): Drop
redundant null check.
It was fairly trivial to return snapshot listing based on a
point in the hierarchy, rather than starting at all roots.
* src/esx/esx_driver.c (esxDomainSnapshotNumChildren)
(esxDomainSnapshotListChildrenNames): New functions.
No need to request the parent of a snapshot if we aren't going to use it.
* src/esx/esx_vi.c (esxVI_GetSnapshotTreeByName): Make parent
optional.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML)
(esxDomainSnapshotLookupByName, esxDomainRevertToSnapshot)
(esxDomainSnapshotDelete): Simplify accordingly.
Commit 9f5e53e introduced the ability to filter snapshots to
just roots, but it was never implemented for ESX until now.
* src/esx/esx_vi.h (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Add parameter.
* src/esx/esx_vi.c (esxVI_GetNumberOfSnapshotTrees)
(esxVI_GetSnapshotTreeNames): Allow choice of recursion or not.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames): Use it to limit to roots.
Before, URIs such as esx+ssh:// have been declined by the ESX driver
resulting in the remote driver trying to connect to an non-existing
libvirtd.
Now such URIs trigger an error in the ESX driver suggesting to try
again without the transport part in the scheme.
Commit 498d783 cleans up some of virtual file names for parsing strings
in memory. This patch cleans up (hopefuly) the rest forgotten by the
first patch.
This patch also changes all of the previously modified "filenames" to
valid URI's replacing spaces for underscores.
Changes to v1:
- Replace all spaces for underscores, so that the strings form valid
URI's
- Replace spaces in places changed by commit 498d783
Prior to this patch, <domainsnapshot>/<disks> was ignored. This
changes it to be an error unless an explicit disk snapshot is
requested (a future patch may relax things if it turns out to
be useful to have a <disks> specification alongside a system
checkpoint).
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Disk
snapshots not supported yet.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Likewise.
Just like VM saved state images (virsh save), snapshots MUST
track the inactive domain xml to detect any ABI incompatibilities.
The indentation is not perfect, but functionality comes before form.
Later patches will actually supply a full domain; for now, this
wires up the storage to support one, but doesn't ever generate one
in dumpxml output.
Happily, libvirt.c was already rejecting use of VIR_DOMAIN_XML_SECURE
from read-only connections, even though before this patch, there was
no information to be secured by the use of that flag.
And while we're at it, mark the libvirt snapshot metadata files
as internal-use only.
* src/libvirt.c (virDomainSnapshotGetXMLDesc): Document flag.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Add member.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Update signature.
* src/conf/domain_conf.c (virDomainSnapshotDefFree): Clean up.
(virDomainSnapshotDefParseString): Optionally parse domain.
(virDomainSnapshotDefFormat): Output full domain.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML)
(esxDomainSnapshotGetXMLDesc): Update callers.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML)
(vboxDomainSnapshotGetXMLDesc): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotLoad, qemuDomainSnapshotGetXMLDesc)
(qemuDomainSnapshotWriteMetadata): Likewise.
* docs/formatsnapshot.html.in: Rework doc example.
Based on a patch by Philipp Hahn.
Just as leaving managed save metadata behind can cause problems
when creating a new domain that happens to collide with the name
of the just-deleted domain, the same is true of leaving any
snapshot metadata behind. For safety sake, extend the semantic
change of commit b26a9fa9 to also cover snapshot metadata as a
reason to reject undefining an inactive domain. A future patch
will make sure that shutdown of a transient domain automatically
deletes snapshot metadata (whether by destroy, shutdown, or
guest-initiated action). Management apps of transient domains
should take care to capture xml of snapshots, if it is necessary
to recreate the snapshot metadata on a later transient domain
with the same name and uuid.
This also documents a new flag that hypervisors can choose to
support as a shortcut for taking care of the metadata as part of
the undefine process; however, nontrivial driver support for these
flags will be deferred to future patches.
Note that ESX and VBox can never be transient; therefore, they
do not have to worry about automatic cleanup after shutdown
(the persistent domain still remains); likewise they never
store snapshot metadata, so the undefine flag is trivial.
The nontrivial work remaining is thus in the qemu driver.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA): New flag.
* src/libvirt.c (virDomainUndefine, virDomainUndefineFlags):
Document new limitations and flag.
* src/esx/esx_driver.c (esxDomainUndefineFlags): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainUndefineFlags): Likewise.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Enforce
the limitations.
Redefining a qemu snapshot requires a bit of a tweak to the common
snapshot parsing code, but the end result is quite nice.
Be careful that redefinitions do not introduce circular parent
chains. Also, we don't want to allow conversion between online
and offline existing snapshots. We could probably do some more
validation for snapshots that don't already exist to make sure
they are even feasible, by parsing qemu-img output, but that
can come later.
* src/conf/domain_conf.h (virDomainSnapshotParseFlags): New
internal flags.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString): Alter
signature to take internal flags.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Update caller.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new public flags.
The first two flags are essential for being able to replicate
snapshot hierarchies across multiple hosts, which will come in
handy for supervised migrations. It also allows a management app
to take a snapshot of a transient domain, save the metadata, stop
the domain, recreate a new transient domain by the same name,
redefine the snapshot, then revert to it.
This is not quite as convenient as leaving the metadata behind
after a domain is no longer around, but doing that has a few
problems: 1. the libvirt API can only delete snapshot metadata
if there is a valid domain handle to use to get to that snapshot
object - if stale data is left behind without a domain, there is
no way to request that the data be cleaned up. 2. creating a new
domain with the same name but different uuid than the older
domain where a snapshot existed cannot use the older snapshot
data; this risks confusing libvirt, and forbidding the stale
data is similar to the recent patch to forbid stale managed save.
The first two flags might be useful on hypervisors with no metadata,
but only for modifying the notion of the current snapshot;
however, I don't know how to do that for ESX or VBox.
The third flag is a convenience option, to combine a creation with
a delete metadata into one step. It is trivial for hypervisors
with no metadata.
The qemu changes will be involved enough to warrant a separate patch.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE)
(VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT)
(VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotCreateXML): Document them, and
enforce mutual exclusion.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* docs/formatsnapshot.html.in: Document re-creation.
To make it easier to know when undefine will fail because of existing
snapshot metadata, we need to know how many snapshots have metadata.
Also, it is handy to filter the list of snapshots to just those that
have no parents; document that flag now, but implement it in later patches.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_ROOTS)
(VIR_DOMAIN_SNAPSHOT_LIST_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotListNames): Document them.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames): Implement trivial flag.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotNum)
(vboxDomainSnapshotListNames): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNum)
(qemuDomainSnapshotListNames): Likewise.
A future patch will make it impossible to remove a domain if it
would leave behind any libvirt-tracked metadata about snapshots,
since stale metadata interferes with a new domain by the same name.
But requiring snaphot contents to be deleted before removing a
domain is harsh; with qemu, qemu-img can still make use of the
contents after the libvirt domain is gone. Therefore, we need
an option to get rid of libvirt tracking information, but not
the actual contents. For hypervisors that do not track any
metadata in libvirt, the implementation is trivial; all remaining
hypervisors (really, just qemu) will be dealt with separately.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotDelete): Trivially
supported when there is no libvirt metadata.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotDelete): Likewise.
Silently ignored flags get in the way of new features that
use those flags.
Regarding ESX migration flags - right now, ESX silently enforces
VIR_MIGRATE_PERSIST_DEST, VIR_MIGRATE_UNDEFINE_SOURCE, and
VIR_MIGRATE_LIVE, even if those flags were not supplied; it ignored
other flags. This patch does not change the implied bits (it permits
but does not require them), but enforces only the supported bits.
If further cleanup is needed to be more particular about migration
flags, that should be a separate patch.
* src/esx/esx_device_monitor.c (esxDeviceOpen): Reject unknown
flags.
* src/esx/esx_driver.c (esxOpen, esxDomainReboot)
(esxDomainXMLFromNative, esxDomainXMLToNative)
(esxDomainMigratePrepare, esxDomainMigratePerform)
(esxDomainMigrateFinish): Likewise.
* src/esx/esx_interface_driver.c (esxInterfaceOpen): Likewise.
* src/esx/esx_network_driver.c (esxNetworkOpen): Likewise.
* src/esx/esx_nwfilter_driver.c (esxNWFilterOpen): Likewise.
* src/esx/esx_secret_driver.c (esxSecretOpen): Likewise.
* src/esx/esx_storage_driver.c (esxStorageOpen): Likewise.
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.
Add a check for the expected domain types to the virDomainDefParse*
functions.
To avoid regressions, we let callers specify whether to require a
minor and micro version. Callers that were parsing uname() output
benefit from defaulting to 0, whereas callers that were parsing
version strings from other sources should not change in behavior.
* src/util/util.c (virParseVersionString): Allow caller to choose
whether to fail if minor or micro is missing.
* src/util/util.h (virParseVersionString): Update signature.
* src/esx/esx_driver.c (esxGetVersion): Update callers.
* src/lxc/lxc_driver.c (lxcVersion): Likewise.
* src/openvz/openvz_conf.c (openvzExtractVersionInfo): Likewise.
* src/uml/uml_driver.c (umlGetVersion): Likewise.
* src/vbox/vbox_MSCOMGlue.c (vboxLookupVersionInRegistry):
Likewise.
* src/vbox/vbox_tmpl.c (vboxExtractVersion): Likewise.
* src/vmware/vmware_conf.c (vmwareExtractVersion): Likewise.
* src/xenapi/xenapi_driver.c (xenapiGetVersion): Likewise.
Reported by Matthias Bolte.
This patch deprecates following enums:
VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG
VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG
VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG
And modify internal codes to use virDomainModificationImpact.
Detected by Coverity. The beginning of the function already filtered
out NULL objectContentList as invalid. Further investigation shows:
esxVI_RetrieveProperties is generated and returns a list of objects
that match the given propertyFilterSpec.
esxVI_LookupObjectContentByType then tests whether the result
corresponds to the expected occurrence and reports an error otherwise.
This simplifies the callers of esxVI_LookupObjectContentByType, but
due to the missing dereference the check was never performed because
the code thought that at least one item was obtained. NULL represents
an empty list. This is a potential segfault fix because callers of
esxVI_LookupObjectContentByType that specified "required" occurrence
assume *objectContentList to be non-NULL when
esxVI_LookupObjectContentByType succeeds.
* src/esx/esx_vi.c (esxVI_LookupObjectContentByType): Check
correct pointer.
Well, the remaining drivers that already had the get/set
scheduler parameter functionality to begin with.
For now, this blindly treats VIR_DOMAIN_SCHEDINFO_CURRENT as
the only supported operation for these 5 domains; it will
take domain-specific patches if more specific behavior is
preferred.
* src/esx/esx_driver.c (esxDomainGetSchedulerParameters)
(esxDomainSetSchedulerParameters): Move guts...
(esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): ...to new functions.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParameters)
(libxlDomainSetSchedulerParameters)
(libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcGetSchedulerParameters)
(lxcSetSchedulerParameters, lxcGetSchedulerParametersFlags)
(lxcSetSchedulerParametersFlags): Likewise.
* src/test/test_driver.c (testDomainGetSchedulerParams)
(testDomainSetSchedulerParams, testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetSchedulerParameters)
(xenUnifiedDomainSetSchedulerParameters)
(xenUnifiedDomainGetSchedulerParametersFlags)
(xenUnifiedDomainSetSchedulerParametersFlags): Likewise.
Before commit 145d6cb05c (in August 2010) absolute file names
in VMX and domain XML configs were handled correctly. But this got
lost during the refactoring. The test cases didn't highlight this
problem because they have their own set of file name handling
functions. The actual ones require a real connection to an ESX
server. Also the test case functions always worked correctly.
Fix the regression and add a new in-the-wild VMX file that contains
such a problematic absolute path. Even though this test case won't
protect against new regressions.
Reported by lofic (IRC nick)
Otherwise an attempt to use virConnectOpen or virConnectOpenAuth without
auth pointer results in the driver declining the URI and libvirt falling
back to the remote driver for an esx:// URI.
Some drivers assumed it can be NULL (e.g. qemu and lxc) and check it
before assigning to it, other drivers assumed it must be non-NULL
(e.g. test and esx) and just assigned to it.
Unify this to nparams being optional and document it.
When the session has expired then multiple threads can race while
reestablishing it.
This race condition is not that critical as it requires a special usage
pattern to be triggered. It can only happen when an application doesn't
do API calls for quite some time (the session expires after 30 min
inactivity) and then multiple threads doing simultaneous API calls and
end up doing simultaneous calls to esxVI_EnsureSession.
Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:
qemudDomainResume, /* domainResume */
qemudDomainShutdown, /* domainShutdown */
NULL, /* domainReboot */
qemudDomainDestroy, /* domainDestroy */
to
.domainResume = qemudDomainResume,
.domainShutdown = qemudDomainShutdown,
.domainDestroy = qemudDomainDestroy,
And get rid of any existing C99 style initializersr which
set NULL, eg change
.listPools = vboxStorageListPools,
.numOfDefinedPools = NULL,
.listDefinedPools = NULL,
.findPoolSources = NULL,
.poolLookupByName = vboxStoragePoolLookupByName,
to
.listPools = vboxStorageListPools,
.poolLookupByName = vboxStoragePoolLookupByName,
Fix some driver names:
s/virDrvCPUCompare/virDrvCompareCPU/
s/virDrvCPUBaseline/virDrvBaselineCPU/
s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
s/virDrvSecretListSecrets/virDrvListSecrets/
And some driver struct field names:
s/getFreeMemory/nodeGetFreeMemory/
Several vSphere API methods are called on global objects like the
FileManager, the PerformanceManager or the SearchIndex. The generator
input file allows to mark such methods and the generator generates
such method in a way that automatically handles marked parameter. This
is done by some special macros. Those were manually written and this
patch moves them to the generator.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This matches the public API and helps to get rid of some special
case code in the remote generator.
Rename driver API functions and XDR protocol structs.
No functional change included outside of the remote generator.
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose. Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.
global rename performed with:
$ git grep -l virBufferVSprintf \
| xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'
then revert the changes in ChangeLog-old.
Add missing early exits and convert error logging to proper API level
error reporting.
Centralize cleanup code for the PerfQuerySpec object.
Reported by Eric Blake, detected by clang.
The ++ on preliminaryFileName was a left over from a previous version
of this function that explicitly returned the filename and did a strdup
on preliminaryFileName afterwards.
As the filename isn't returned explicitly anymore remove the preliminary
variable for it and reuse the tmp variable instead.
Reported by Eric Blake, detected by clang.
This was broken by the refactoring in ac1e6586ec. It resulted in a
segfault for 'virsh vol-dumpxml' and related volume functions.
Before the refactoring all users of the ESX_VI__TEMPLATE__DISPATCH
macro dispatched on the item type, as the item is the input to all those
functions.
Commit ac1e6586ec made the dynamically dispatched CastFromAnyType
functions use this macro too, but this functions dispatched on the
actual type of the AnyType object. The item is the output of the
CastFromAnyType functions.
This difference was missed in the refactoring, making CastFromAnyType
functions dereferencing the item pointer that is NULL at the time of
the dispatch.
This warnings come from partly generated code. Therefore, the best
solution is to mark them as potentially being unused using the
ATTRIBUTE_UNUSED macro. This is suggested by the gcc documentation.
Reported by Christophe Fergeau
New APIs are added allowing streaming of content to/from
storage volumes.
* include/libvirt/libvirt.h.in: Add virStorageVolUpload and
virStorageVolDownload APIs
* src/driver.h, src/libvirt.c, src/libvirt_public.syms: Stub
code for new APIs
* src/storage/storage_driver.c, src/esx/esx_storage_driver.c:
Add dummy entries in driver table for new APIs
