In all cases *except* when parsing status XML as libvirt is being
restarted, the XML parser will delete any manually specified interface
name (aka "<target dev='blah'/>" aka net->ifname) that could have been
generated by virNetDevGenerateName(). This means that during the setup
when a domain is being started (e.g. during
virLXCProcessSetupInterfaceTap()) it is pointless to call
virNetDevReserveName() with any setting of net->ifname that has come
from the XML parser - it is guaranteed to not fit the pattern of any
auto-generated name, and so the call is just a NOP anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to missing pdpe1gb support in the host CPU data, the CPU is still
incorrectly detected as Westmere-IBRS for host capabilities because we
don't have the option to disable features included in the base model
there.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When defining/creating a network the bridge name may be filled in
automatically by libvirt (if none provided in the input XML or
the one provided is a pattern, e.g. "virbr%d"). During the
bridge name generation process a candidate name is generated
which is then checked with the rest of already defined/running
networks for collisions.
Problem is, that there is no mutex guarding this critical section
and thus if two threads line up so that they both generate the
same candidate they won't find any collision and the same name is
then stored.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/78
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The @fds member of qemuMonitorFdsetInfo struct is an array and as
such, it's allocated in qemuMonitorJSONQueryFdsetsParse() but not
freed in qemuMonitorFdsetsFree().
Fixes: b8998cc670f7b1b11a83276050e49dce7efba333
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
@tmp that was copied just above is leaked on plain return.
The issue is found by Coverity.
Patch that inroduced a leak:
d4439a6b8 : src: adopt to VIR_DRV_SUPPORTS_FEATURE return -1
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes compiler error:
src/qemu/qemu_migration.c:4814:20: error: ‘dstOffline’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
4814 | if (offline && !dstOffline) {
The commit that introduced the error:
910b94df: qemu: adopt to VIR_DRV_SUPPORTS_FEATURE return -1
Signed-off-by: Nick Shyrokovskiy <nshyrokovskiy@gmail.com>
Changes to a virtio network device such as
<interface type="network">
<model type="virtio"/>
<driver iommu="on" ats="on"/> <!-- this line added -->
...
</interface>
were quietly dismissed by `virsh update-device ... --live`.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise we can get misleading error messages. One example is when connection
is broken we got "this function is not supported by the connection driver:
virDomainMigrate3" from virDomainMigrate3.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When an interface has some bandwidth limitation set (it's root
qdisc is htb in that case) but this gets cleared out via public
API call (virDomainSetInterfaceParameters() or
virDomainUpdateDeviceFlags()) then virNetDevBandwidthSet() clears
out whatever qdiscs were set on the interface and kernel places
the default qdisc at the root. What we need to do next is to
replace the root qdisc with the one we want.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Fixes: 0b66196d86ea375234cb0ee99289c486f9921820
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While the code that's setting default qdisc is clever enough to
not overwrite any bandwidth (potentially) set by
virNetDevBandwidthSet() (and thus the root qdisc htb is not
replaced with noqueue), it does print a debug message when that's
the case. It's needless. We can set the root qdisc beforehand and
let virNetDevBandwidthSet() overwrite it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some secdrivers (typically SELinux driver) generate unique
dynamic seclabel for each domain (unless a static one is
requested in domain XML). This is achieved by calling
qemuSecurityGenLabel() from qemuProcessPrepareDomain() which
allocates unique seclabel and stores it in domain def->seclabels.
The counterpart is qemuSecurityReleaseLabel() which releases the
label and removes it from def->seclabels. Problem is, that with
current code the qemuProcessStop() may still want to use the
seclabel after it was released, e.g. when it wants to restore the
label of a disk mirror.
What is happening now, is that in qemuProcessStop() the
qemuSecurityReleaseLabel() is called, which removes the SELinux
seclabel from def->seclabels, yada yada yada and eventually
qemuSecurityRestoreImageLabel() is called. This bubbles down to
virSecuritySELinuxRestoreImageLabelSingle() which find no SELinux
seclabel (using virDomainDefGetSecurityLabelDef()) and this
returns early doing nothing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1751664
Fixes: 8fa0374c5b8e834fcbdeae674cc6cc9e6bf9019f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The only reason why virstoragefile.h needs to be included in virfile.h
is that virFileNBDDeviceAssociate() takes virStorageFileFormat argument.
The function doesn't need the enum value as it converts the value to
string and uses only that.
Change the argument to string which will allow us to remove that
include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All these headers are indirectly included provided by virfile.h having
virstoragefile.h which will be removed in the following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function doesn't take virStorageSource as argument and has nothing
in common with virStorageSource or storage file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Function virQEMUBuildQemuImgKeySecretOpts is not used anywhere else
so there is no need to have it in util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The last usage outside of tests was removed by commit
<780f8c94ca8b3dee7eb59c1bfbc32f672f965df8>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The last user was removed by commit
<40f0e0348dfc84f28a500e262c4953b0d3b44fa0>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, swtpm TPM state file is removed when a transient domain is
powered off or undefined. When we store TPM state on a shared storage
such as NFS and use transient domain, TPM states should be kept as it is.
Add per-TPM emulator option `persistent_sate` for keeping TPM state.
This option only works for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' persistent_state='yes'/>
</tpm>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The kernel refuses to set guest TSC frequency less than a minimum
frequency or greater than maximum frequency (both computed based on the
host TSC frequency). When writing the libvirt code with a reversed logic
(return success when the requested frequency falls within the tolerance
interval) I forgot to include the boundaries.
Fixes: d8e5b4560006590668d4669f54a46b08ec14c1a2
https://bugzilla.redhat.com/show_bug.cgi?id=1839095
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactor in 0316c28a453ac used incorrect source variable to initialize
the variable which holds the name of the bitmap which needs to be
deleted after the backup job finishes. This resulted into deleting the
source bitmap of the backup rather than the temporary one.
Use 'dd->incrementalBitmap' which holds the temporary bitmap name
instead of 'dd->backupdisk->incremental' which holds the name of the
source bitmap which is used by the backup.
Fixes: 0316c28a453ac15f58c61f30359f66ab9a649884
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1908647
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a VM with an empty cdrom which has <iotune> configured the
startup fails as qemu is not happy about setting tuning for an empty
drive:
error: internal error: unable to execute 'block_set_io_throttle', unexpected error: 'Device has no medium'
Resolve this by skipping the setting of throttling for empty drives and
updating the throttling when new medium is inserted into the drive.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/111
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is perfectly valid in VMWare and the VM just boots with an empty drive. We
used to just skip the whole drive before, but since we changed how we parse
empty cdrom drives this results in an error. Make it behave more closer to
VMWare.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1903953
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
And return the actual extracted value in a parameter. This way we can later
return success even without any extracted value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The positive branch can just return and the huge negative part does not need to
be indented an extra level. Best viewed with `-w`.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Remove @ret and @created variables which are not needed really.
Signed-off-by: Yi Li <yili@winhong.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
None of the callers care about errno really. The errno will be
reported by virReportSystemError().
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The caller doesn't care about errno really. The errno will be
reported by virReportSystemError().
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we configure QEMU to prealloc memory almost by
default. Well, by default for NVDIMMs, hugepages and if user
asked us to (via memoryBacking <allocation mode="immediate"/>).
However, when guest's NVDIMM is backed by real life NVDIMM this
approach is not the best. In this case users should put <pmem/>
into the <memory/> device <source/>, like this:
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/pmem0</path>
<pmem/>
</source>
</memory>
Instructing QEMU to do prealloc in this case means that each
page of the NVDIMM is "touched" (the first byte is read and
written back - see QEMU commit v2.9.0-rc1~26^2) which cripples
device wear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1894053
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When rewriting the function, I've mistakenly declared a variable
and assigned it to itself. Let's initialize the variable properly.
Fixes: 5fb6d98c881c42ab41ca72060217b846949a438f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are a few places where we open code virStrcpy() or
virStrcpyStatic(). Call respective functions instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In virSecurityLabelDefParseXML() we are parsing the <seclabel/>
element among with its attributes. Some of the attributes are
limited in length (because of virNodeGetSecurityModel()), however
some are not. And for the latter ones we don't need to use
virXMLPropStringLimit() to parse them. Moreover, using
VIR_SECURITY_LABEL_BUFLEN as the limit is wrong - we are not
storing the parsed strings into a static buffer of that size
rather than checking if the string passes string -> enum
conversion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While previously we returned 0 this is not correct. We have to
return a negative value to indicate error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though we are getting driver capabilities with
refresh=false (so that it is not expensive), we still should do
ACL check first because there is no point in bothering with the
capabilities if caller doesn't have permissions to call the API.
Also, this way the comment makes more sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code we have there to copy seclabel model or doi can be
replaced by virStrcpy() calls which do exactly the same checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After v6.3.0-rc1~64 a lease can have infinite expiry time. This
means that the expiration time will appear as a value of zero.
Do the expiration check only if the expiration time is not zero.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1908053
Fixes: 97a0aa246799c97d0a9ca9ecd6b4fd932ae4756c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, bring variables that are used only within loops into
their respective loops. Secondly, drop 'error' label which is
redundant since we have @rv which holds the return value.
Thirdly, fix indendation in one case, the rest is indented
properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function is misusing VIR_INSERT_ELEMENT() to behave like
VIR_APPEND_ELEMENT(). Use the latter to make it explicit what we
are trying to achieve.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need to track the lease file size. Instead, we can
simply check if the file was empty by comparing the buffer the
file was read into with an empty string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When adding a new lease by our leaseshelper then virLeaseNew() is
called. Here, we check for DNSMASQ_LEASE_EXPIRES environment
variable which is the expiration time for the lease. For infinite
lease time the value is zero. However, our code is not prepared
for that and adds "expiry-time" into the JSON file only if lease
expiry time is non-zero. This breaks the assumption that the
"expiry-time" attribute is always present (as can be seen in
virLeaseReadCustomLeaseFile() and virLeasePrintLeases()).
Store "expiry-time" always.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
