Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability says if qemu is capable of specifying distances
between NUMA nodes on the command line. Unfortunately, there's no
real way to check this and thus we have to go with version check.
QEMU introduced this in 0f203430dd8 (and friend) which was
released in 2.10.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The function returns true/false depending on distance
configuration being present in the domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There's no point in checking if numa->mem_nodes[node].ndistances
is set if we check for numa->mem_nodes[node].distances. However,
it makes sense to check if the sibling node (@cellid) caller
passed falls within boundaries.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When QEMU dies, we read its output stored in a log file and use it for
reporting a hopefully useful error. However, virReportError will trim
the message to (VIR_ERROR_MAX_LENGTH - 1) characters, which means the
end of the log (which likely contains the error message we want to
report) may get lost. We should trim the beginning of the log instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1335534
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When reading QEMU log for reporting it as an error message, we want to
skip "char device redirected to" line. However, this string is not
printed at the beginning of a line, which means STRPREFIX will never
find it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Historically we've formatted a lot of the attributes of a disk (disk
geometry, etc) with -drive. Since we use -device now, they should be
formatted there. Extract them to a separate function for keeping
compatibility with SDcards which still use only -drive.
Start this by moving the geometry into a separate function.
When doing block commit we need to allow write for members of the
backing chain so that we can commit the data into them.
qemuDomainDiskChainElementPrepare was used for this which since commit
786d8d91b4 calls qemuDomainNamespaceSetupDisk which has very adverse
side-effects, namely it relabels the nodes to the same label it has in
the main namespace. This was messing up permissions for the commit
operation since its touching various parts of a single backing chain.
Since we are are actually not introducing new images at that point add a
flag for qemuDomainDiskChainElementPrepare which will refrain from
calling to the namespace setup function.
Calls from qemuDomainSnapshotCreateSingleDiskActive and
qemuDomainBlockCopyCommon do introduce new members all calls from
qemuDomainBlockCommit do not, so the calls are anotated accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1506072
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
Just like in 9324f67a57 we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function only queries domain @def. It doesn't change it.
Therefore it should take const pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The compiler can warn us if we add a value to the
virDomainChrSerialTargetType enumeration but forget to handle
it properly in the code. Let's take advantage of that.
This commit is best viewed with 'git diff -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add a separate capability for the sclplmconsole device, and check it
specifically instead of using QEMU_CAPS_DEVICE_SCLPCONSOLE for that too.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Give a better name to the capability for the sclpconsole device.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until now we assumed the spapr-vty device would always be
present, which is not very nice. Check for its availability before
using it instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Because the cache banks are initialized based on the order in which their
respective directories exist on the filesystem, they can appear in different
order. This is here mainly for tests because the cache directory might have
different order of children nodes and tests would fail otherwise. It should not
be the case with sysfs, but one can never be sure. And this does not take
almost any extra time, mainly because it gets initialized once per driver.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Sometimes the size of the bitmap matters and it might not be guessed correctly
when parsing from some type of input. For example virBitmapNewData() has Byte
granularity, virBitmapNewString() has nibble granularity and so on.
virBitmapParseUnlimited() can be tricked into creating huge bitmap that's not
needed (e.g.: "0-2,^99999999"). This function provides a way to shrink the
bitmap. It is not supposed to free any memory.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Already introduced in the past with 9479642fd3, but then renamed to
virBitmapIntersect by a908e9e45e. This time we'll really use it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Our bitmaps can be represented as data (raw bytes for which we have
virBitmapNewData() and virBitmapToData()), human representation (list
of numbers in a string for which we have virBitmapParse() and
virBitmapFormat()) and hexadecimal string (for which we have only
virBitmapToString()). So let's add the missing complement for the
last one so that we can parse hexadecimal strings.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Truncate the output so that it is only as big as is needed to fit all
the bits, not all the units from the map. This will be needed in the
future in order to properly format bitmaps for kernel's sysfs files.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This follows the virBitmapToData() function and, similarly to
virBitmapNewData(), we'll be able to have virBitmapNewString() later
on without name confusion.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We can't output better memory sizes if we want to be compatible with libvirt
older than the one which introduced /memory/unit, but for new things we can just
output nicer capacity to the user if available. And this function enables that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Resolve a storage driver crash as a result of a long running
storageVolCreateXML when the virStorageVolPoolRefreshThread is
run as a result of when a storageVolUpload completed and ran the
virStoragePoolObjClearVols without checking if the creation
code was currently processing a buildVol after incrementing
the driver->asyncjob count.
The refreshThread will now check the pool asyncjob count before
attempting to pursue the pool refresh. Adjust the documentation
to describe the condition.
Crash from valgrind is as follows (with a bit of editing):
==21309== Invalid read of size 8
==21309== at 0x153E47AF: storageBackendUpdateVolTargetInfo
==21309== by 0x153E4C30: virStorageBackendUpdateVolInfo
==21309== by 0x153E52DE: virStorageBackendVolRefreshLocal
==21309== by 0x153DE29E: storageVolCreateXML
==21309== by 0x562035B: virStorageVolCreateXML
==21309== by 0x147366: remoteDispatchStorageVolCreateXML
...
==21309== Address 0x2590a720 is 64 bytes inside a block of size 336 free'd
==21309== at 0x4C2F2BB: free
==21309== by 0x54CB9FA: virFree
==21309== by 0x55BC800: virStorageVolDefFree
==21309== by 0x55BF1D8: virStoragePoolObjClearVols
==21309== by 0x153D967E: virStorageVolPoolRefreshThread
...
==21309== Block was alloc'd at
==21309== at 0x4C300A5: calloc
==21309== by 0x54CB483: virAlloc
==21309== by 0x55BDC1F: virStorageVolDefParseXML
==21309== by 0x55BDC1F: virStorageVolDefParseNode
==21309== by 0x55BE5A4: virStorageVolDefParse
==21309== by 0x153DDFF1: storageVolCreateXML
==21309== by 0x562035B: virStorageVolCreateXML
==21309== by 0x147366: remoteDispatchStorageVolCreateXML
...
This is similar to the virDomainQemuMonitorCommand API, it can change
the domain state in a way that libvirt may not understand.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We put the server into a hash table as we do with the other daemons,
there is no compelling reason why it should have another pointer
dedicated just to the server. Besides, the locking daemon doesn't have
it and virtlogd is essentially a copy paste of virtlockd.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Setup everything related to disks in one place rather than calling in
from various places.
The change to ordering of the setup steps is necessary since secrets
need the master key to be present.
In some cases it does not make sense to pursue that the private data
will be allocated (especially when we don't need to put anything in it).
Ensure that the code works without it.
This also fixes few crashes pointed out in
https://bugzilla.redhat.com/show_bug.cgi?id=1510323
If creation of the main JSON object containing the storage portion of a
virStorageSource would fail but we'd allocate the server structure we'd
leak it. Found by coverity.
Return NULL right away in qemuBlockStorageSourceGetBackendProps when an
invalid storage source is presented so that virJSONValueObjectAdd isn't
called with a NULL argument.
Found by coverity.
The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.
Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba01. Fix them properly now.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110
