Requiring the user to pass in parallel arrays of names and parents
is annoying; it means that you can't qsort one of the arrays without
invalidating the ordering of the other. By refactoring this function
to use callbacks, we isolate the layout to be independent of the
printing, and a future patch can exploit that to improve layout.
* tools/virsh.c (vshTreePrintInternal): Use callbacks rather than
requiring a char** array.
(vshTreeArrayLookup): New helper function.
(vshTreePrint, cmdNodeListDevices, cmdSnapshotList): Update callers.
I am not a fan of fixed-width buffers. All it takes is a
linear chain of more than 100 snapshots to mess up 'virsh
snapshot-list --tree'. Now that virBuffer is more powerful,
we might as well exploit its power.
* tools/virsh.c (cmdNodeListDevicesPrint): Simplify to use a
virBuffer instead of fixed-width prefix, factor guts, and rename...
(vshTreePrint, vshTreePrintInternal): ...along with new helper.
(cmdNodeListDevices, cmdSnapshotList): Update callers.
Commits 51082301, 16d7b39, and 521cc447 introduced support for
'virsh snapshot-list --from' when talking to a server older than
0.9.5, but broke support for plain 'virsh snapshot-list' for the
same old server in the process. Because the code is not properly
gated, we end up with a SIGSEGV during a strcmp with a NULL argument.
* tools/virsh.c (cmdSnapshotList): Don't waste time on fallbacks
when --from is not present.
If you compile without NLS support, where _() is a no-op macro,
then we end up passing a string literal to a char*, provoking:
In file included from virsh.c:3639:0:
virsh-edit.c: In function ‘cmdSaveImageEdit’:
virsh-edit.c:97:13: error: assignment discards ‘const’ qualifier from pointer target type [-Werror]
virsh-edit.c:106:13: error: assignment discards ‘const’ qualifier from pointer target type [-Werror]
* tools/virsh-edit.c: Be const-safe.
If users *-edit but make a mistake in XML all changes are
permanently lost. However, if virsh is not running within
a script we can ask user if he wants to re-edit the file
and correct the mistakes.
Currently, we either generate some cmd*Edit commands (cmdPoolEdit
and cmdNetworkEdit) via sed script or copy the body of cmdEdit
(e.g. cmdInterfaceEdit, cmdNWFilterEdit, etc.). This fact makes
it harder to implement any new feature to our editing system.
Therefore switch to new implementation - define macros to:
- dump XML (EDIT_GET_XML)
- take an action if XML wasn't changed,
usually just vshPrint() (EDIT_NOT_CHANGED)
- define new object (EDIT_DEFINE) - the edited XML is in @doc_edited
- free object defined by EDIT_DEFINE (EDIT_FREE)
and #include "virsh-edit.c"
strncpy is generally evil - it runs the risk of missing NUL
termination, and more often than not wastes time zeroing way
more bytes than strictly necessary. We've avoided this evil
in our virStrncpy wrapper, except for places where we forgot
to use the wrapper; meanwhile, we have also added an even
higher layer wrapper for setting virTypedParameter values.
* tools/virsh.c (cmdMemtune, cmdBlkdeviotune): Use modern API.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_strncpy): Tighten.
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently virDomainGetCPUStats gets total cpu usage, which consists
of:
1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
domain
2. hypervisor: `total cpu usage' - `vcpu usage'
The param 'vcpu_time' is for getting vcpu usages.
$LISTFILE is created even no domain is running, and the empty
$LISTFILE could cause improper service status.
stopped ,with saved guests
Which is not right, as there is no domain was saved.
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
* tools/virsh.c (vshParseSnapshotDiskspec): Fix off-by-3 memmove
that would corrupt heap when parsing escaped --diskspec comma.
Bug introduced via commit v0.9.4-260-g35d52b5.
The recent push to use correct scaling terms (kB for 1000, KiB for
1024 - such as commit 9dfdead) missed some places in virsh.
* tools/virsh.c (prettyCapacity, cmdDominfo, cmdFreecell)
(cmdNodeinfo, cmdNodeMemStats, cmdMigrateSetMaxSpeed)
(cmdBlockCopy, cmdBlockPull, cmdBlockJob): Use KiB, not kB, when
referring to multiples of 1024.
* tests/virshtest.c: Update expected output to match.
https://bugzilla.redhat.com/show_bug.cgi?id=817244 mentions that
unlike most other tools, where --help or --version prevent all
further parsing of all later options, virsh was strange in that
--version stopped parsing but --help tried to plow on to the end.
There was no rationale for this original implementation (since
2005!), so I think we can safely conform to common usage patterns.
* tools/virsh.c (main): Drop useless 'help' variable.
Rather than further overloading 'blockpull', I decided to create a
new virsh command to expose the new flags of virDomainBlockRebase.
Blocking until the command completes naturally is pointless, since
the block copy job is intended to run indefinitely. Instead, I
made the command support three --wait modes: by default, it runs until
mirroring is started; with --pivot, it pivots as soon as mirroring
is started; and with --finish, it aborts (for a clean copy) as
soon as mirroring is started.
* tools/virsh.c (VSH_CMD_BLOCK_JOB_COPY): New mode.
(blockJobImpl): Support new flags.
(cmdBlockCopy): New command.
(cmdBlockJob): Support new job info, new abort flag.
* tools/virsh.pod (blockcopy, blockjob): Document the new command
and flags.
We were forgetting to check errno for overflow.
* tools/virsh.c (get_integer_keycode, vshCommandOptInt)
(vshCommandOptUInt, vshCommandOptUL, vshCommandOptLongLong)
(vshCommandOptULongLong): Rewrite to be safer.
I'm tired of shell-scripting to wait for completion of a block pull,
when virsh can be taught to do the same. I couldn't quite reuse
vshWatchJob, as this is not a case of a long-running command where
a second thread must be used to probe job status (at least, not unless
I make virsh start doing blocking waits for an event to fire), but it
served as inspiration for my simpler single-threaded loop. There is
up to a half-second delay between sending SIGINT and the job being
aborted, but I didn't think it worth the complexity of a second thread
and use of poll() just to minimize that delay.
* tools/virsh.c (cmdBlockPull): Add new options to wait for
completion.
(blockJobImpl): Add argument.
(cmdBlockJob): Adjust caller.
* tools/virsh.pod (blockjob): Document new mode.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch cleans up variables used to store boolean command flags that
are inquired by vshCommandOptBool to use the bool data type instead of
an integer.
Additionally this patch cleans up flag variables that are inferred from
existing flags.
The documentation for the flag doesn't clearly state that the flag only
enhances the output and the user needs to specify other flags to list
inactive domains, that are enhanced by this flag.
Currently, we put no strains on escape sequence possibly leaving users
with console that cannot be terminated. However, not all ASCII
characters can be used as escape sequence. Only those falling in
@ - _ can be; implement and document this constraint.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Leaks are introduced in commit 1cf0e3d and fe383bb.
Fixing memory leaks, in addition, the patch also fixes a potential missing
return value issue in 'if (from)' statement, without the fixing, although
the programming met a error, the subsequent codes will be executed
continually.
* tools/virsh.c (cmdSnapshotList): fix memory leaks and missing return value.
* How to reproduce?
% virsh snapshot-list <domain> --parent --roots
% virsh snapshot-list <domain> --parent --tree
% virsh snapshot-list <domain> --roots --tree
actual result:
error: --parent and --roots are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --parent and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --roots and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
% virsh snapshot-create-as <domain> --name "hello"
% virsh snapshot-create-as <domain> --name "libvirt"
% virsh snapshot-list <domain> --roots --from "hello"
actual result:
error: --roots and --from are mutually exclusive
Name Creation Time State
------------------------------------------------------------
libvirt 2012-03-28 13:46:51 +0800 running
Signed-off-by: Alex Jia <ajia@redhat.com>
Commit d42a2ff forgot to touch up virsh documentation, and commit
4e9953a mis-spelled the option name.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Fix typo
and match recent change in flag meaning.
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). All
other struct initializers for this struct have the extra field filled
in (almost always to 0), so the two errant ones were fixed by adding
in the extra 0 field.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
virsh.pod had several instances in which it referred to "the
documentation" which was a little puzzling to me since it is
documentation. Reading the document from end to end makes it clear
that it means a specific URI which was noted previously in the text,
but I had never noticed those URIs in several years of referring to
the man page. This patch adds those URIs to several additional places
in the text.
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".
tools/virsh.c: (use "--config", and "--persistent" is
alias of "--config" now).
cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
cmdDetachInterface, cmdAttachDisk, cmdDetachDisk
toos/virsh.pod: Update docs of the changed commands, and
add some missed docs for "--config" (detach-interface,
detach-disk, and detach-device).
