We use the PreFormat callback for this. Many test cases need to be extended
to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors.
One test case (pcie-root-port-too-many) is dropped, since it was meant
only for checking an error condition in qemuxml2argv, and one we add in
AssignAddresses it errors here too.
Long term I think AssignAddresses should be handled in qemu's PostParse
callback, but that's not entirely straightforward. Handling it here
means we can get the test suite churn over with.
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
Implicit controllers may be dependent on device definitions altered
in a post-parse callback. Specifically, if a console device is
defined without the target type, the type will be set in QEMU's
callback. In the case of s390, this is virtio, which requires
an implicit virtio-serial controller.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.
Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.
Tests were updated via:
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
followed by a few fixes for the stragglers.
Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.
* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
* src/conf/domain_conf.h: Add new member "target" to struct
_virDomainDeviceDriveAddress.
* src/conf/domain_conf.c: Parse and format "target"
* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
tests/vmx2xmldata/ are modified for newly introduced
attribute "target" for address of "drive" type.
Some tools, such as virt-manager, prefers having the default USB
controller explicit in the XML document. This patch makes sure there
is one. With this patch, it is now possible to switch from USB1 to
USB2 from the release 0.9.1 of virt-manager.
Fix tests to pass with this change.
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.
This extends the round up fix in 6002e0406c
to the whole codebase.
Instead of reporting errors for odd values in the VMX code round them up.
Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.
Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
As noticed by Eric, commit 8e28c5d402,
which fixed generation of virtio-serial port numbers, forgot to adjust
test files which resulted in make check failure.
Add tests for auto memballon, implicit IDE, SCSI, virtio channel
controllers, and console/serial back compat.
Additionally, an explicit qemuxml2argvtest for scsi disks is added.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
