Some drivers require a server in order to work, so this flag removes the
burden of esach driver to check for an server by doing it in
virConnectOpenInternal.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
This new flag will be set when a driver needs a remote URL in order to
work, as ESX, HyperV and Phyp.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
When re-defining an active storage pool, due to a bug the config
file on disk is not changed. This is because we are passing old
definition instead of new one to virStoragePoolObjSaveDef.
This issue was introduced by bfcd8fc9,
Signed-off-by: Changkuo Shi <shi.changkuo@h3c.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Document and check that @props contains a pointer to a json object and
check that both necessary fields are present. Also mark @props as
NONNULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The check whether the object holding secret for decryption of the TLS
environment was wrong and would always attempt to add the object. This
lead to a crash due to recent refactors.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1598015
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If qemu-pr-helper process died while libvirtd was not running no
event is emitted. Therefore, when reconnecting to the monitor we
must check the qemu-pr-helper process status and act accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function fetches status of all pr-managers. So far, qemu
reports only a single attribute "connected" but that fits our
needs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This event is emitted on the monitor if one of pr-managers lost
connection to its pr-helper process. What libvirt needs to do is
restart the pr-helper process iff it corresponds to managed
pr-manager.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there are managed reservations for a disk source, the path to
the pr-helper socket is generated automatically by libvirt when
needed and points somewhere under priv->libDir. Therefore it is
very unlikely that the path will work even on migration
destination (the libDir is derived from domain short name and its
ID).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than rejecting the user provided path and alias for the
managed PR reservation we will ignore the provided path. The
reason is that migration XML does contain path even for managed
reservations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Users have possibility to disable qemu namespace feature (e.g.
because they are running on *BSD which lacks Linux NS support).
If that's the case we should not try to move qemu-pr-helper into
the same namespace as qemu is in.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the new proper location for the read/write error policy selection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for specifying it with the -device frontend was added recently.
Add a capability for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add output arguments generated with the latest qemu capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add multiple drives with the various configurations rather than having
multiple tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow using -blockdev with RBD we need to support the recently added
RBD authentication.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Based on qemu commit ab3257c281c1a1a91da1090ac9e38ddd8f860c63
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add helpers that allow using the latest schema from the replies from an
actual qemu which are recorded for the purpose of the qemucapabilities
test instead of an unsynced copy stored in qemuqapischema.json.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It builds the string for '-device' from a virDomainDiskDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Aggregate the code for the two separate formats used according to the
machine type and add some supporting code so that the function is
actually readable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBulildFloppyCommandLineOptions built its own version of the -drive
alias. Replace it by qemuAliasDiskDriveFromDisk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further split qemuBuildDiskCommandLine to separate formatting of the
source part.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SD card hotplug should not be implemented until they can be used via
-blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the semantics to exactly opposite and rename it to
qemuDiskBusNeedsDriveArg. This will be necessary as some devices can't
be used with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are testing character devices so the disk is not necessary. Minimize
the configuration. This will prevent changes when switching to blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The sectors read from the backing image need to be written to the top
level image. If a disk is marked read-only the image can't be written.
QEMU handled that by disabling copy_on_read and reporting a warning:
-drive file=/var/lib/libvirt/images/c,format=qcow2,if=none,
id=drive-scsi0-0-1,readonly=on,copy-on-read=on:
warning: disabling copy-on-read on read-only drive
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commit c95f50cb02 we always set a disk format in the
post parse callback so the code that mandates use of explicit format for
shareable disks no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There wasn't an explicit type case to the video type enum in
qemuDomainDeviceDefValidateVideo, _TYPE_GOP was also missing from the
switch.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move the video post parse bits into a separate helper as the logic is
going to be extended in the future.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Future patches rely on the ability to reset the contents of the
virDomainVideoDef structure rather than re-allocating it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since 133fb140 moved the validation of a video device into a separate
function, the code handling PCI slot assignment for video devices has
been the same for both the primary device and the secondary devices.
Let's merge these and thus handle all the devices within the existing
'for' loop.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU uses a shorthand '-sdl' which maps to '-display sdl'. However, if
there are any options to be passed to SDL, the full command version must
be used. Everything seemingly worked for us until commit 5038b30043
introduced OpenGL support for SDL and added ',gl=on/off' option which as
mentioned above could have never worked with the shorthand version of
the command. Indeed starting a domain with an SDL display and OpenGL
enabled, QEMU produces a rather cryptic error:
-sdl: Could not open 'gl=on': No such file or directory
This patch provides fixes to both the SDL cmdline generation and the
test suite.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adding the 'default' case to our enum-typecasted switches is the current
safety trend, so add it here for mdevs too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It should be the command line helper who takes care of the iteration
rather than the caller.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It's pointless to check the same thing multiple times.
Fix the indentation along the way too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0
Signed-off-by: Han Han <hhan@redhat.com>
Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu changed the output field name for the architecture from 'arch' to
'target'. Note the change and fix the code so that the arch-specific
extraction works.
https://bugzilla.redhat.com/show_bug.cgi?id=1598829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The wraper is quite pointless and also the 'arch' field may depend on
whether query-cpus-fast is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function is called from various clean up paths (e.g.
from qemuBuildInterfaceCommandLine). However, depending on the
stage the interface creation process failed at, net->ifname might
still be not filled in when control jumps to cleanup label. If
that is the case return early (avoiding useless error message
produced in virNWFilterBindingLookupByPortDev) as there is no
NWFilter to tear down anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After 6b770f9a3b both @netsource and @srcprops are leaked
because of early return introduced in the commit.
==1812== 644 bytes in 4 blocks are definitely lost in loss record 835 of 885
==1812== at 0x4C2F12F: realloc (vg_replace_malloc.c:785)
==1812== by 0x8846393: xmlSaveUriRealloc (in /usr/lib64/libxml2.so.2.9.8)
==1812== by 0x8846B1C: xmlSaveUri (in /usr/lib64/libxml2.so.2.9.8)
==1812== by 0x5DDA619: virURIFormat (viruri.c:256)
==1812== by 0x56E941B: qemuBuildNetworkDriveURI (qemu_command.c:781)
==1812== by 0x56E979A: qemuBuildNetworkDriveStr (qemu_command.c:859)
==1812== by 0x56F3A0B: qemuBuildSCSIiSCSIHostdevDrvStr (qemu_command.c:4664)
==1812== by 0x56F3D1F: qemuBuildSCSIHostdevDrvStr (qemu_command.c:4732)
==1812== by 0x56F57F7: qemuBuildHostdevCommandLine (qemu_command.c:5337)
==1812== by 0x570303A: qemuBuildCommandLine (qemu_command.c:10376)
==1812== by 0x57604EE: qemuProcessCreatePretendCmd (qemu_process.c:6649)
==1812== by 0x11352A: testCompareXMLToArgv (qemuxml2argvtest.c:566)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of simply dumping the list of authors as obtained
from git, we can be a bit smarter and filter out maintainers
so that their names don't appear twice.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We can't do this in general, but for maintainers we have
the data in AUTHORS.in to use as a source of truth.
This gets rid of several duplicated lines in the generated
AUTHORS file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The basic mailmap syntax works for simple cases, but
sometimes it requires two entiries or doesn't work at all;
switch to the more complex syntax in those cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Based on which of the two files has been updated most
recently, and what name is used for recent commits.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While technically correct (you have to send patches for
your name to appear on the list) the remark was clearly
intended for a time before AUTHORS was partially generated
from the git log.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
These two examples do not use any definition from config.h, and by
removing it these examples can be compiled standalone.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
