Commit Graph

15 Commits

Author SHA1 Message Date
Eric Blake
96e0d6774f dbus: fix arrays of bools
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools.  But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:

  CC       util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
            GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
            x = (dbustype *)(*xptrptr + (*narrayptr - 1));              \
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.

But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool).  Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.

Obviously, our testsuite wasn't covering as much as it should have.

* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-25 08:47:12 -07:00
Eric Blake
2aa167cafd virdbus: don't force users to pass int for bool values
Use of an 'int' to represent a 'bool' value is confusing.  Just
because dbus made the mistake of cementing their 4-byte wire
format of dbus_bool_t into their API doesn't mean we have to
repeat the mistake.  With a little bit of finesse, we can
guarantee that we provide a large-enough value to the DBus
code, while still copying only the relevant one-byte bool
to the client code, and isolate the rest of our code base from
the DBus stupidity.

* src/util/virdbus.c (GET_NEXT_VAL): Add parameter.
(virDBusMessageIterDecode): Adjust all clients.
* src/util/virpolkit.c (virPolkitCheckAuth): Use nicer type.
* tests/virdbustest.c (testMessageSimple, testMessageStruct):
Test new behavior.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-19 08:20:39 -07:00
Daniel P. Berrange
88a2dc1f4c Support passing dict by reference for dbus messages
Currently DBus dict values must be passed inline

   virDBusMessageEncode("a{ss}",
                        3,
                        "key1", "val1",
                        "key2", "val2",
                        "key3", "val3");
   virDBusMessageDecode("a{ss}",
                        3,
                        &key1, &val1,
                        &key2, &val2,
                        &key3, &val3);

This allows them to be passed by reference

   const char **dictin = {
      "key1", "val1",
      "key2", "val2",
      "key3", "val3"
   };
   char **dictout;
   size_t ndictout;

   virDBusMessageEncode("a&{ss}",
                        ARRAY_CARDINALITY(dict) / 2,
                        dictin);
   virDBusMessageDecode("a&{ss}",
                        &ndictout,
                        &dictout);

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-09-24 15:29:22 +01:00
Eric Blake
28de556dde maint: drop spurious semicolons
I noticed a line 'int nparams = 0;;' in remote_dispatch.h, and
tracked down where it was generated.  While at it, I found a
couple of other double semicolons.  Additionally, I noticed that
commit df0b57a95 left a stale reference to the file name
remote_dispatch_bodies.h.

* src/conf/numatune_conf.c (virDomainNumatuneNodeParseXML): Drop
empty statement.
* tests/virdbustest.c (testMessageStruct, testMessageSimple):
Likewise.
* src/rpc/gendispatch.pl (remote_dispatch_bodies.h): Likewise, and
update stale comments.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-08-25 17:29:30 -06:00
Nehal J Wani
968aae48c9 Fix Memory Leak in testMessageArrayRef()
While running virdbustest, it was found that valgrind pointed out
the following memory leaks:

==9996== 17 (8 direct, 9 indirect) bytes in 1 blocks are definitely lost in loss record 9 of 36
==9996==    at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==9996==    by 0x4A06B62: realloc (vg_replace_malloc.c:662)
==9996==    by 0x4C6B587: virReallocN (viralloc.c:245)
==9996==    by 0x4C6B6AE: virExpandN (viralloc.c:294)
==9996==    by 0x4C82B54: virDBusMessageDecodeArgs (virdbus.c:907)
==9996==    by 0x4C83463: virDBusMessageDecode (virdbus.c:1141)
==9996==    by 0x402C45: testMessageArrayRef (virdbustest.c:273)
==9996==    by 0x404E71: virtTestRun (testutils.c:201)
==9996==    by 0x401C2D: mymain (virdbustest.c:479)
==9996==    by 0x4055ED: virtTestMain (testutils.c:789)
==9996==    by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==9996==
==9996== 28 (16 direct, 12 indirect) bytes in 1 blocks are definitely lost in loss record 12 of 36
==9996==    at 0x4A06BE0: realloc (vg_replace_malloc.c:662)
==9996==    by 0x4C6B587: virReallocN (viralloc.c:245)
==9996==    by 0x4C6B6AE: virExpandN (viralloc.c:294)
==9996==    by 0x4C82B54: virDBusMessageDecodeArgs (virdbus.c:907)
==9996==    by 0x4C83463: virDBusMessageDecode (virdbus.c:1141)
==9996==    by 0x402C45: testMessageArrayRef (virdbustest.c:273)
==9996==    by 0x404E71: virtTestRun (testutils.c:201)
==9996==    by 0x401C2D: mymain (virdbustest.c:479)
==9996==    by 0x4055ED: virtTestMain (testutils.c:789)
==9996==    by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==9996==

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-31 14:56:17 -06:00
Ján Tomko
2dcdb7f654 Indent top-level labels by one space in tests/ 2014-03-25 14:58:41 +01:00
Daniel P. Berrange
2c64603366 Introduce alternate way to encode/decode arrays in DBus messages
Currently the DBus helper APIs require the values for an array
to be passed inline in the variadic argument list. This change
introduces support for passing arrays using a pointer to a plain
C array of the basic type. This is of particular benefit for
decoding messages when you don't know how many array elements
are being received.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-21 11:26:34 +00:00
Daniel P. Berrange
2835c1e730 Add virLogSource variables to all source files
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Martin Kletzander
cc9c62fef9 Require spaces around equality comparisons
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-18 11:29:44 +01:00
Daniel P. Berrange
eee6eb666c Remove test case average timing
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Eric Blake
15168f9874 tests: test negative number through dbus
Commit f1088c8 weakened a test, by not passing a value larger
than INT_MAX through an int slot.  Make the fix in a different
way, using an explicit negative value.  Suggested by Dan Berrange.

* tests/virdbustest.c (testMessageArray): Adjust previous fix.
(testMessageStruct): Use a negative number.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-09 08:57:01 -06:00
Eric Blake
f1088c8177 tests: avoid too-large constants
Compiling with gcc 4.1.2 (RHEL 5) on a 32-bit platform complains:

virdbustest.c: In function 'testMessageSimple':
virdbustest.c:61: warning: integer constant is too large for 'long' type
virdbustest.c:62: warning: integer constant is too large for 'long' type
virdbustest.c: In function 'testMessageArray':
virdbustest.c:183: warning: this decimal constant is unsigned only in ISO C90
virdbustest.c: In function 'testMessageStruct':
virdbustest.c:239: warning: integer constant is too large for 'long' type
virdbustest.c:240: warning: integer constant is too large for 'long' type

* tests/virdbustest.c (testMessageSiple, testMessageArray)
(testMessageStruct): Don't violate C89 constant constraints.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-09 07:46:18 -06:00
Daniel P. Berrange
9ed3e6c117 Fix dbus message reading code on big endian hosts
The way we were casting small (<32bit) integers was broken
on big endian hosts, causing stack smashing. This was detected
in the test suite either by test failures due to incorrect
results, or by libc/gcc abort'ing with its stack canary
triggered.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-29 18:08:55 +01:00
Guido Günther
6b79a47270 virdbustest: Don't pass number of arguments as long long
since sizeof(int) != sizeof(long long) on 32bit archs.

This unbreaks virdbustest which otherwise fails like:

 (gdb) bt
 #0  __strlen_sse2_bsf () at ../sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S:50
 #1  0x405907d2 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
 #2  0x4057c140 in ?? () from /lib/i386-linux-gnu/libdbus-1.so.3
 #3  0x4057e7ec in dbus_message_iter_append_basic () from /lib/i386-linux-gnu/libdbus-1.so.3
 #4  0x400742ec in virDBusMessageIterEncode (args=0xbfd4b8f0 "k\321\004\b.", types=0x804d260 "",
     rootiter=0xbfd4b844) at util/virdbus.c:560
 #5  virDBusMessageEncodeArgs (msg=msg@entry=0x893c278, types=types@entry=0x804d25c "sais",
     args=args@entry=0xbfd4b8d8 "r\320\004\b\003") at util/virdbus.c:921
 #6  0x40075917 in virDBusMessageEncode (msg=0x893c278, types=0x804d25c "sais") at util/virdbus.c:959
 #7  0x0804a4a1 in testMessageArray (args=0x0) at virdbustest.c:195
 #8  0x0804c404 in virtTestRun (title=title@entry=0x804cfcb "Test message array ",
     nloops=nloops@entry=1, body=body@entry=0x804a3f0 <testMessageArray>, data=data@entry=0x0)
     at testutils.c:168
 #9  0x08049346 in mymain () at virdbustest.c:384
 #10 0x0804cb2e in virtTestMain (argc=argc@entry=1, argv=argv@entry=0xbfd4bb24,
     func=func@entry=0x80492c0 <mymain>) at testutils.c:764
 #11 0x080491af in main (argc=1, argv=0xbfd4bb24) at virdbustest.c:393
2013-07-25 16:20:49 +02:00
Daniel P. Berrange
834c9c9459 Introduce virDBusCallMethod & virDBusMessageRead methods
Doing DBus method calls using libdbus.so is tedious in the
extreme. systemd developers came up with a nice high level
API for DBus method calls (sd_bus_call_method). While
systemd doesn't use libdbus.so, their API design can easily
be ported to libdbus.so.

This patch thus introduces methods virDBusCallMethod &
virDBusMessageRead, which are based on the code used for
sd_bus_call_method and sd_bus_message_read. This code in
systemd is under the LGPLv2+, so we're license compatible.

This code is probably pretty unintelligible unless you are
familiar with the DBus type system. So I added some API
docs trying to explain how to use them, as well as test
cases to validate that I didn't screw up the adaptation
from the original systemd code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-22 13:09:58 +01:00