This patch introduces the usage of the pre-associate state of the IEEE 802.1Qbg standard on incoming VM migration on the target host. It is in response to bugzilla entry 632750.
https://bugzilla.redhat.com/show_bug.cgi?id=632750
For being able to differentiate the exact reason as to why a macvtap device is being created, either due to a VM creation or an incoming VM migration, I needed to pass that reason as a parameter from wherever qemudStartVMDaemon is being called in order to determine whether to send an ASSOCIATE (VM creation) or a PRE-ASSOCIATE (incoming VM migration) towards lldpad.
I am also fixing a problem with the virsh domainxml-to-native call on the way.
Gerhard successfully tested the patch with a recent blade network 802.1Qbg-compliant switch.
The patch should not have any side-effects on the 802.1Qbh support in libvirt, but Roopa (cc'ed) may want to verify this.
In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address
* src/qemu/qemu.conf: Add spice_listen, spice_tls,
spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
spice config parameters and updating -spice arg generation
to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
tests/qemuxml2argvtest.c: Expand test case to cover driver
level configuration
This supports the -spice argument posted for review against
the latest upstream QEMU/KVM. This supports the bare minimum
config with port, TLS port & listen address. The x509 bits are
added in a later patch.
* src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
-spice availability. Format -spice arg for command line
* qemuhelptest.c: Add SPICE flag
* qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
for spice
* qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
* qemuxml2argvtest.c: Add SPICE flag
This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL
* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
case for generating spice args with RHEL6 kvm
The patch is based on the possiblity in the QEmu command line to
add -smbios options allowing to override the default values picked
by QEmu. We need to detect this first from QEmu help output.
If the domain is defined with smbios to be inherited from host
then we pass the values coming from the Host own SMBIOS, but
if the domain is defined with smbios to come from sysinfo, we
use the ones coming from the domain definition.
* src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum
value
* src/qemu/qemu_conf.c: scan the help output for the smbios support,
and if available add support based on the domain definitions,
and host data
* tests/qemuhelptest.c: add the new enum in the outputs
Add dump_image_format[] to qemu.conf and support compressed dump
at virsh dump. coredump compression is important for saving disk space
in an environment where multiple guests run.
In general, "disk space for dump" is specially allocated and will be
a dead space in the system. It's used only at emergency. So, it's better
to have both of save_image_format and dump_image_format. "save" is done
in scheduled manner with enough calculated disk space for it.
This code reuses some of save_image_format[] and supports the same format.
Changelog:
- modified libvirtd_qemu.aug
- modified test_libvirtd_qemu.aug
- fixed error handling of qemudSaveCompressionTypeFromString()
So far, readonly=on option is used when qemu supports -device. However,
there are qemu versions which support readonly option with -drive
although they don't have support for -device.
This sets the process name to the same value as the Windows title,
but since the name is limited to 16 chars only this is kept as a
configuration option and turned off by default
* src/qemu/qemu.conf src/qemu/qemu_conf.[ch]: hceck for support in the
QEmu help output, add the option in qemu conf file and augment
qemudBuildCommandLine to add it if switched on
* src/qemu/libvirtd_qemu.aug src/qemu/test_libvirtd_qemu.aug: augment
the augeas lenses accordingly
* tests/qemuhelptest.c: cope with the extra flag being detected now
This enables support for nested SVM using the regular CPU
model/features block. If the CPU model or features include
'svm', then the '-enable-nesting' flag will be added to the
QEMU command line. Latest out of tree patches for nested
'vmx', no longer require the '-enable-nesting' flag. They
instead just look at the cpu features. Several of the models
already include svm support, but QEMU was just masking out
the svm bit silently. So this will enable SVM on such
models
* src/qemu/qemu_conf.h: flag for -enable-nesting
* src/qemu/qemu_conf.c: Use -enable-nesting if VMX or SVM are in
the CPUID
* src/cpu/cpu.h, src/cpu/cpu.c: API to check for a named feature
* src/cpu/cpu_x86.c: x86 impl of feature check
* src/libvirt_private.syms: Add cpuHasFeature
* src/qemuhelptest.c: Add nesting flag where required
Make use of the existing <filesystem> element to support plan9fs
filesystem passthrough in the QEMU driver
<filesystem type='mount'>
<source dir='/export/to/guest'/>
<target dir='/import/from/host'/>
</filesystem>
NB, the target is not actually a directory, it is merely a arbitrary
string tag that is exported to the guest as a hint for where to mount
it.
Previously QEMU enabled KQEMU by default and had -no-kqemu.
0.11.x switched to requiring -enable-kqemu. 0.12.x dropped
kqemu entirely. This patch adds support for -enable-kqemu
so 0.11.x works. It replaces a huge set of if() with a
switch() to make the code a bit more readable.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Support
-enable-kqemu
Add a new element to the <os> block:
<bootmenu enable="yes|no"/>
Which maps to -boot,menu=on|off on the QEMU command line.
I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
Implement the qemu hooks for XML namespace data. This
allows us to specify a qemu XML namespace, and then
specify:
<qemu:commandline>
<qemu:arg value='arg'/>
<qemu:env name='name' value='value'/>
</qemu:commandline>
In the domain XML.
Changes since v1:
- Change the <qemu:arg>arg</qemu:arg> XML to <qemu:arg value='arg'/> XML
- Fix up some memory leaks in qemuDomainDefNamespaceParse
- Rename num_extra and extra to num_args and args, respectively
- Fixed up some error messages
- Make sure to escape user-provided data in qemuDomainDefNamespaceFormatXML
Changes since v2:
- Add checking to ensure environment variable names are valid
- Invert the logic in qemuDomainDefNamespaceFormatXML to return early
Changes since v3:
- Change strspn() to c_isalpha() check of first letter of environment variable
Signed-off-by: Chris Lalancette <clalance@redhat.com>
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device
<memballoon model='virtio|xen'/>
It can also have a PCI address, auto-assigned if necessary.
The memballoon will be automatically added to all Xen and QEMU
guests by default.
* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
and formatting for memballoon device. Always add a memory
balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
PCI device address in memory balloon device
* tests/*: Update to test new functionality
Disk format probing is now disabled by default. A new config
option in /etc/qemu/qemu.conf will re-enable it for existing
deployments where this causes trouble
In case qemu supports -nodefconfig, libvirt adds uses it when launching
new guests. Since this option may affect CPU models supported by qemu,
we need to use it when probing for available models.
We previously assumed that if the -device option existed in qemu, that
-nodefconfig would also exist. It turns out that isn't the case, as
demonstrated by qemu-kvm-0.12.3 in Fedora 13.
*/src/qemu/qemu_conf.[hc] - add a new QEMUD_CMD_FLAG, set it via the
help output, and check it before adding
-nodefconfig to the qemu commandline.
This allows libvirt to open the PCI device sysfs config file prior
to dropping privileges so qemu can access the full config space.
Without this, a de-privileged qemu can only access the first 64
bytes of config space.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Detect support
for pci-assign.configfd option. Use this option when formatting
PCI device string if possible
* src/qemu/qemu_driver.c: Pre-open PCI sysfs config file and pass
to QEMU
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbg'>
<parameters managerid='12' typeid='0x123456' typeidversion='1'
instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
</virtualport>
<filterref filter='clean-traffic'/>
</interface>
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbh'>
<parameters profileid='my_profile'/>
</virtualport>
</interface>
I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.
Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
- removing macvtap.h's dependency on domain_conf.h by
moving the virVirtualPortProfileDef structure into macvtap.h
and not passing virtDomainNetDefPtr to any functions in
macvtap.c
- Addressed most of Chris Wright's comments:
- indicating error in case virtualport XML node cannot be parsed
properly
- parsing hex and decimal numbers using virStrToLong_ui() with
parameter '0' for base
- tgifname (target interface name) variable wasn't necessary
to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
file for subsequent patches to easier make them generally available
for export
- passing the macvtap interface name rather than the link device since
this otherwise gives funny side effects when using netlink messages
where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
we wanted to use hook scripts for the setup and so the setup doesn't fail
here.
- if instance ID UUID is not supplied it will automatically be generated
- adapted schema to make instance ID UUID optional
- added test case
- parser and XML generator have been separated into their own
functions so they can be re-used elsewhere (passthrough case
for example)
- Adapted XML parser and generator support the above shown type
(802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
necessary to use (for SR-IOV)
Currently all host audio backends are disabled if a VM is using VNC, in
favor of the QEMU VNC audio extension. Unfortunately no released VNC
client supports this extension, so users have no way of getting audio
to work if using VNC.
Add a new config option in qemu.conf which allows changing libvirt's
behavior, but keep the default intact.
v2: Fix doc typos, change name to vnc_allow_host_audio
The qemu driver contains a subtle race in the logic to find next
available vnc port. Currently it iterates through all available ports
and returns the first for which bind(2) succeeds. However it is possible
that a previously issued port has not yet been bound by qemu, resulting
in the same port used for a subsequent domain.
This patch addresses the race by using a simple bitmap to "reserve" the
ports allocated by libvirt.
V2:
- Put port bitmap in struct qemud_driver
- Initialize bitmap in qemudStartup
V3:
- Check for failure of virBitmapGetBit
- Additional check for port != -1 before calling virbitmapClearBit
V4:
- Check for failure of virBitmap{Set,Clear}Bit
There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Chris Lalancette <clalance@redhat.com>
(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST
$7 = 0xffffffff80000000
Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK
for qemu-kvm-0.12.3 (and probably botching a few other settings as well).
Fixes Red Hat BZ#592070
* src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign
extension.
* tests/qemuhelpdata/qemu-kvm-0.12.3: New file.
* tests/qemuhelptest.c (mymain): Add another case.
Disk devices in QEMU have two parts, the guest device and the host
backend driver. Historically these two parts have had the same
"unique" name. With the switch to using -device though, they now
have separate names. Thus when changing CDROM media, for guests
using -device syntax, we need to prepend the QEMU_DRIVE_HOST_PREFIX
constant
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add helper function
qemuDeviceDriveHostAlias() for building a host backend alias
* src/qemu/qemu_driver.c: Use qemuDeviceDriveHostAlias() to determine
the host backend alias for performing eject/change commands in the
monitor
The device_add command was added in JSON mode in a way I didn't
expect. Instead of passing the normal device string to the JSON
command:
{ "execute": "device_add", "arguments": { "device": "ne2k_pci,id=nic.1,netdev=net.1" } }
We need to split up the device string into a full JSON object
{ "execute": "device_add", "arguments": { "driver": "ne2k_pci", "id": "nic.1", "netdev": "net.1" } }
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Rename the
qemuCommandLineParseKeywords method to qemuParseKeywords
and export it to monitor
* src/qemu/qemu_monitor_json.c: Split up device string into
a JSON object for device_add command
The images are saved in /var/lib/libvirt/qemu/save/
and named $domainname.save . The directory is created appropriately
at daemon startup. When a domain is started while a saved image is
available, libvirt will try to load this saved image, and start the
domain as usual in case of failure. In any case the saved image is
discarded once the domain is created.
* src/qemu/qemu_conf.h: adds an extra save path to the driver config
* src/qemu/qemu_driver.c: implement the 3 new operations and handling
of the image directory
* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test
Attempt to turn on vhost-net mode for devices of type NETWORK, BRIDGE,
and DIRECT (macvtap).
* src/qemu/qemu_conf.h: add vhostfd to qemuBuildHostNetStr prototype
add qemudOpenVhostNet prototype new flag to set when :,vhost=" found in
qemu help
* src/qemu/qemu_conf.c: * set QEMUD_CMD_FLAG_VNET_HOST is ",vhost=" found
in qemu help
- qemudOpenVhostNet - opens /dev/vhost-net to pass to qemu if everything
is in place to use it.
- qemuBuildHostNetStr - add vhostfd to commandline if it's not empty
(higher levels decide whether or not to fill it in)
- qemudBuildCommandLine - if /dev/vhost-net is successfully opened, add
its fd to tapfds array so it isn't closed on qemu exec, and populate
vhostfd_name to be passed in to commandline builder.
* src/qemu/qemu_driver.c: add filler 0 for new arg to qemuBuildHostNetStr,
along with a note that this must be implemented in order for hot-plug of
vhost-net virtio devices to work properly (once qemu "netdev_add" monitor
command is implemented).
This allows QEMU guests to be started with an arbitrary clock
offset
The test case can't actually be enabled, since QEMU argv expects
an absolute timestring, and this will obviously change every
time the test runs :-( Hopefully QEMU will allow a relative
time offset in the future.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Use the -rtc arg
if available to support variable clock offset mode
* tests/qemuhelptest.c: Add QEMUD_CMD_FLAG_RTC for qemu 0.12.1
* qemuxml2argvdata/qemuxml2argv-clock-variable.args,
qemuxml2argvdata/qemuxml2argv-clock-variable.xml,
qemuxml2argvtest.c: Test case, except we can't actually enable
it yet.
This patch sets or unsets the IFF_VNET_HDR flag depending on what device
is used in the VM. The manipulation of the flag is done in the open
function and is only fatal if the IFF_VNET_HDR flag could not be cleared
although it has to be (or if an ioctl generally fails). In that case the
macvtap tap is closed again and the macvtap interface torn.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: pass qemuCmdFlags to
qemudPhysIfaceConnect()
* src/util/macvtap.c src/util/macvtap.h: add vnet_hdr boolean to
openMacvtapTap(), and private function configMacvtapTap()
* src/qemu/qemu_driver.c: add extra qemuCmdFlags when calling
qemudPhysIfaceConnect()
Support virtio-serial controller and virtio channel in QEMU backend.
Will output
the following for virtio-serial controller:
-device
virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4,max_ports=16,vectors=4
and the following for a virtio channel:
-chardev pty,id=channel0 \
-device
virtserialport,bus=virtio-serial0.0,chardev=channel0,name=org.linux-kvm.port.0
* src/qemu/qemu_conf.c: Add argument output for virtio
* tests/qemuxml2argvtest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args: Add test for
QEMU command line generation
This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
QEmu driver
With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
off 'drive-' prefix (if found) when looking up disk stats
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes
* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
qemudBuildCommandLine()
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
for assigning device aliases for disks, host devices and
controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
Update for changed hostdev naming scheme
This patch re-arranges the QEMU device alias assignment code to
make it easier to call into the same codeblock when performing
device hotplug. The new code has the ability to skip over already
assigned names to facilitate hotplug
* src/qemu/qemu_driver.c: Call qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_conf.h: Export qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_driver.c: Merge the legacy disk/network alias
assignment code into the main methods
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
Use a single network alias naming scheme regardless of NIC type
or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
for new simpler naming scheme
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
data files for -netdev syntax
PCI disk, disk controllers, net devices and host devices need to
have PCI addresses assigned before they are hot-plugged
* src/qemu/qemu_conf.c: Add APIs for ensuring a device has an
address and releasing unused addresses
* src/qemu/qemu_driver.c: Ensure all devices have addresses
when hotplugging.
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.
It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
list of existing PCI addresses, and allocating new addresses.
Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
qemuStartVMDaemon() method, as a prelude to moving it into the
'define' method. Update list of allocated addresses when connecting
to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
tests/qemuxml2xmltest.c: Remove USB product test since all
passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
unused data files
To allow for better code reuse from hotplug methods, the code for
generating PCI/USB hostdev arg values is split out into separate
methods
* qemu/qemu_conf.h, qemu/qemu_conf.c: Introduce new APis for
qemuBuildPCIHostdevPCIDevStr, qemuBuildUSBHostdevUsbDevStr
and qemuBuildUSBHostdevDevStr
All the helper functions for building command line arguments
now return a 'char *', instead of acepting a 'char **' or
virBufferPtr argument
* qemu/qemu_conf.c: Standardize syntax for building args
* qemu/qemu_conf.h: Export all functions for building args
* qemu/qemu_driver.c: Update for changed syntax for building
NIC/hostnet args
This new security driver is responsible for managing UID/GID changes
to the QEMU process, and any files/disks/devices assigned to it.
* qemu/qemu_conf.h: Add flag for disabling automatic file permission
changes
* qemu/qemu_security_dac.h, qemu/qemu_security_dac.c: New DAC driver
for QEMU guests
* Makefile.am: Add new files
QEMU's command line equivalent for the following domain XML fragment
<vcpus>2</vcpus>
<cpu ...>
...
<topology sockets='1' cores='2', threads='1'/>
</cpu>
is
-smp 2,sockets=1,cores=2,threads=1
This syntax was introduced in QEMU-0.12.
Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing
Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases
* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
To enable it to be called from multiple locations, split out
the code for building the -drive arg string. This will be needed
by later patches which do drive hotplug, the conversion to use
-device, and the conversion to controller/bus/unit addressing
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuBuildDriveStr
for building -drive arg string
The behavior for the qemu balloon device has changed. Formerly, a virtio
balloon device was provided by default. Now, '-balloon virtio' must be
specified on the command line to enable it. This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
* src/qemu/qemu_conf.h: Remove QEMU_CMD_FLAG_0_12 and just leave
the lone JSON flag
* src/qemu/qemu_conf.c: Enable JSON on QEMU 0.13 or later, but
leave it disabled for now
Initial support for the new QEMU monitor protocol using JSON
as the data encoding format instead of plain text
* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.
* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
and qemu-kvm-0.11.0-rc2 regression tests
Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures
* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
Pass qemuMonitorPtr into all monitor APIs instead of the
virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
wrappers for all qemuMonitorXXX command APIs, calling into
qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Rename qemuMonitor -> qemuMonitorText & update to accept
qemuMonitorPtr instead of virDomainObjPtr
Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c
* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
and freeing qemuDomainObjPrivate instances with the domain
capabilities. Remove the qemudDispatchVMEvent() watch since
I/O watches are now handled by the monitor code itself. Pass
a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
the 'qemuMonitor' object. Temporarily add new APIs
qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
to monitor instead of accessing the file handle directly.
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddHostNetwork() method for adding host networks
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
args, and remove hardcoded 'nic' prefix. Leave it upto callers
instead
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddPCINetwork API for PCI network device hotplug
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
