This function had a loop that was only executed twice; it was
artificially constructed with a label, a goto, and a boolean to tell
that it had already been executed once. Aside from that, the body of
the loop contained only two lines that needed to be repeated (the
second time through, everything beyond those two lines would be
skipped).
One side effect of this strange loop was that a g_autofree string was
manually freed and re-initialized; I've been told that manually
freeing a g_auto_free object is highly discouraged.
This patch refactors the function to simply repeat the 2 lines that
might possibly be executed twice, thus eliminating the ugly use of
goto to construct a loop, and also takes advantage of the fact that
virPCIDriverDir() was previously returning *exactly* the same string
both times it was called to eliminate the manual VIR_FREE of drvpath.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is no need for a temporary variable in this function, and since
it can't return NULL, no need for callers to check for it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is no need for a temporary variable in this function, and ever
since we switched to glib for memory allocation, there is no possibility
it can return NULL, so callers don't need to check for it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Apparently at some point in the past, when there were multiple types
to represent PCI addresses, the function
virPCIDeviceAddressGetSysfsFile() used one of those types, while
virDomainHostDevDef used another. It's been quite awhile since we
reduced the number of different representations of PCI address, but
this function was still creating a temporary virPCIDeviceAddress, then
copying the individual elements into this temporary object from the
same type of object in the virDomainHostDevDef.
This patch just eliminates that pointless copy.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When this function was recently changed to add in parsing of
IFLA_VF_STATS, I noticed that the checks for existence of IFLA_VF_MAC
and IFLA_VF_VLAN were looking in the *wrong array*. The array that
contains the results of parsing each IFLA_VFINFO in
tb[IFLA_VFINFO_LIST] is tb_vf, but we were checking for these in tb
(which is the array containing the results of the toplevel parsing of
the netlink message, *not* the results of parsing one of the nested
IFLA_VFINFO's.
This incorrect code has been here since the function was originally
written in 2012. It has only worked all these years due to coincidence
- the items at those indexes in tb are IFLA_ADDRESS and IFLA_BROADCAST
(of the *PF*, not of any of its VFs), and those happen to always be
present in the toplevel netlink message; since we are only looking in
the incorrect place to check for mere existence of the attribute (but
are doing the actual retrieval of the attribute from the correct
place), this bug has no real consequences other than confusing anyone
trying to understand the code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Co-authored-by: Sri Ramanujam <sramanujam@datto.com>
Signed-off-by: Matt Coleman <matt@datto.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virNetDevParseVfConfig has became a multifunctional helper function,
rename it to virNetDevParseVfInfo.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
libvirt can retrieve traffic stats for emulated interfaces that are
backed by tap or macvtap devices, but this information wasn't
available for hostdev interfaces (those that are implemented by
assigning an SR-IOV VF device to a guest using vfio):
#virsh domifstat instance --interface=52:54:00:2d:b2:35
error: Failed to get interface stats instance 52:54:00:2d:b2:35
error: internal error: Interface name not provided
For some SR-IOV VF devices this information is available via the
netlink VFINFO_LIST request/response, and that is what this patch uses
to implement stats retrieval for VF. Not that this is dependent on
support in the PF driver - for example, the Mellanox ConnectX-4 Lx
(mlx5) driver reports usable stats, while Intel 82599 (ixgbe) and
82576 (igb) just report all stats as 0. (this is the same result as
"ip -s link show").
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
add-fd, remove-fd, and query-fdsets provide functionality that can be
used for passing fds to qemu and closing fdsets that are no longer
necessary.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recent versions of qemu added the -netdev vhost-vdpa device. This
capability allows libvirt to know whether this is supported.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
My code movement changed the type of ifaces_ret from
virDomainInterfacePtr * to virDomainInterfacePtr **,
but failed to adjust the condition or dereference the
array correctly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 6ddb1f803ea38d8d709b984fa9539e34318a9dc0
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBuildHostdevSCSIAttachPrepare is supposed to prepare the data
structure used for attaching the hostdev not preparing the hostdev
definition itself. Move the corresponding bits to qemuDomainPrepareHostdev
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's not necessarily clear, why we need to create the hash table
as big as number of fields we want to store, but nevertheless,
the code can be written a bit better. The @count should be type
of size_t and could be used directly in the loop that counts the
fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The hypervSetEmbeddedProperty() function is used to update a
value for given property in a list of properties created by
hypervCreateEmbeddedParam(). The list is nothing fancy - it's a
virHashTable that has NULL as dataFree callback => the table does
not own the value. This is not that obvious since
hypervSetEmbeddedProperty() accepts a non-const pointer. This
fact makes it unnecessary hard to consume, e.g. if we wanted to
pass a stack allocated string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Switch to the new QMP command once it becomes available. Since the code
was refactored to have just one central location to do this we can
contain the ugly bits to just this one function.
Since we now use the replacement for 'nbd-server-add' mark the test case
as being OK with removal of the command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the monitor code, corresponding generator of properties for NBD and
tests validating it against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'block-export-add' QMP command is a replacement for 'nbd-server-add'
and will allow greater flexibility. Add a capability so that we can
switch to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Centralize the logic deciding which arguments to use when exporting a
block backend via NBD to a single place so that it can be centrally
fixed in upcoming commits to support the new export method via
'block-export-add'.
Additionally this allows simplification of the caller from migration as
the logic deciding which arguments to use is extracted too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the proper video device type when parsing bhyve's commandline into a
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Now, that ownership transfer of hypervSetEmbeddedProperty() is
clear, we can use automatic freeing of the hash table.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Upon successful return hypervAddEmbeddedParam() transfers
ownership of @table argument to @params. But because it takes
only simple pointer (which hides this ownership transfer) it
doesn't clear the @table pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Now, that hypervInvokeMethod() clears the passed pointer we don't
need a special cleanup label ('params_cleanup') that handles
non-obvious ownership transfer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Upon invocation, hypervInvokeMethod() consumes passed @params
(the second argument) regardless whether success or failure is
released. However, it takes only simple pointer (which hides this
ownership transfer) and because of that it doesn't clear it.
Switch to double pointer and tweak the documentation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Matt Coleman <matt@datto.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
This patch enables autofill of these attributes right before launching
QEMU and thus updating the live XML.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Checks such as this one should be done at domain def validation time,
not before starting the QEMU process.
As for this change, existing domains will see some QEMU error when
starting as opposed to a libvirt error that this QEMU binary doesn't
support SEV, but that's okay, we never guaranteed error messages to
remain the same.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rename the function to qemuValidateDomainVCpuTopology() to reflect
what it is currently doing as well.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
