OpenStack needs disk serial number setup because
nova boot --block-device-mapping command generates that param in
libvirt xml. I took QEMU libvirt driver behavior as a base.
QEMU driver skips inability to set serial and continues work.
So Parallels driver will ignore this param too and let domain
boot.
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We handle this parameter for VMs while defining
domains, so let's get this property from PCS and
set corresponding field of virDomainNetDef in
prlsdkLoadDomains function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Call virDomainDefAddImplicitControllers to add disk
controllers, so virDomainDef, filled by this function
will look exactly like the one returned by virDomainDefParseString.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Implement virDomainManagedSave api function. In PCS
this feature called "suspend". You can suspend VM or
CT while it is in running or paused state. And after
resuming (or starting) it will have the same state, as
before suspend.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Split function prlsdkDomainChangeState into
prlsdkDomainChangeStateLocked and prlsdkDomainChangeState.
So it can be used from places, where virDomainObj already
found and locked.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
In order to change an existing domain we delete all existing devices and add
new from scratch. In case of network devices we should also delete corresponding
virtual networks (if any) before removing actual devices from xml. In the patch,
we do it by extending prlsdkDoApplyConfig with a new parameter, which stands for
old xml, and calling prlsdkDelNet every time old xml is specified.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
which is on by default when a new VM/CT is created.
We should do this because this feature can't be controlled
by libvirt now and it sets up some iptables rules. So it's
better to do this to avoid potential conflict of different
set of rules or to avoid unexpected behavior.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
In order to support 'bridge' network adapters in parallels
driver we need to plug our veth devices into corresponding
linux bridges.
We are going to do this by reusing our abstraction of
Virtual Networks in terms of PCS. On a domain creation, we
create a new Virtual Network naming it with the same name
as a source bridge for each network interface.
Having done this, we plug PCS veth interfaces created with names of
target dev into specified bridges using our standard PCS procedures
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Failures of parallelsStorageOpen occured because we incorrectly treated
path to VM' configuration file as a directory. Now initialization of
parallels VM domains home directory is fixed.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Otherwise exporting existing domain config and defining a new one like this:
virsh -c parallels:///system dumpxml instance01 > my.xml
virsh -c parallels:///system define my.xml
leads to an error because PCS default x64 mode turns to x32.
Thus, we need to set correct cpuMode in prlsdkDoApplyConfig() explicitly.
Signed-off-by: Mikhail Feoktistov <mfeoktistov@parallels.com>
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
1. Delete all boot devices for VM instance
2. Find the first HDD from XML and set it as bootable
Now we support only one boot device and it should be HDD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It's possible to create a container with existing
disk image as root filesystem. You need to remove
existing disks from PCS VM config and then add a new
one, pointing to your image. And then call PrlVm_RegEx
with PRNVM_PRESERVE_DISK flag.
With this patch you can create such container with
something like this for new domain XML config:
<filesystem type='file' accessmode='passthrough'>
<driver type='ploop' format='ploop'/>
<source file='/path-to-image'/>
<target dir='/'/>
</filesystem>
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Handle information about filesystems in domain config
and add corresponding devices to container via
parallels sdk.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
PCS removes disk image from filesystem, if you remove it
from config. There is a special flag PVCF_DETACH_HDD_BUNDLE
which allow to remove disk only from VM/CT config.
If you call virDomainDefine and remove some disk from
config it should be preserved, so call PrlVm_CommitEx
always with flag PVCF_DETACH_HDD_BUNDLE.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about container's filesystems and
store it in virDomainDef structure.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add missing VNC setup via Parallels SDK.
Parallels Cloud Server starts one VNC server per domain,
so we could process only one VNC server definition.
Network-based listening currently is unimplemented.
Signed-off-by: Alexander Burluka <aburluka@parallels.com>
VIR_STORAGE_FILE_AUTO should be used only in xml provided to
libvirt by user, if I understood correctly. Driver should
set storage source format to specific disk format in
*DomainGetXMLDesc.
CDROMs in PCS use raw image format.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
For SCSI and SATA devices controller and unit are used
to specify drive address. For IDE devices - bus specifies
IDE bus, becase usually there are 2 IDE buses on IDE
controller.
Parallels SDK allows to set drive position by calling
PrlVmDev_SetStackIndex. Since PCS VMs have only one
controller of each type, for SATA and SCSI devices it
simple means position on bus, for IDE devices -
2 * bus_number + position_on_bus.
This patch fixes mapping from libvirt's disk->info.addr.drive
to parallels's 'StackIndex'.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
It seems file format is usually specified event for
real block devices. So report that file format is
raw in virDomainGetXMLDesc and add checks for proper
file format to prlsdkAddDisk.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
NULL value of virDomainVideoAccelDefPtr means default
values for video acceleration, so don't report error in
this case.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
If we want to perform some operation and domain state is not suitable
for that operation, we should report error VIR_ERR_OPERATION_INVALID.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
When PrlJob_GetRetCode sets second argument to
error value it means sdk function failed and we
must return error from getJobResultHelper.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Return error code, returned by parallels SDK from
waitJob and getJobResult, so that caller can handle
different errors.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Get cdrom devices list from parallels server in
prlsdkLoadDomains and add ability to define a domain
with cdroms.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
First, we don't need to call prlsdkApplyConfig after
creating new VM or containers, because it's done in
functions prlsdkCreateVm and prlsdkCreateCt.
No need to check, if domain exists in the list after
prlsdkAddDomain.
Also organize code, so that we can call virObjectUnlock
in one place.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
This patch replaces code, which creates domains by
running prlctl command.
prlsdkCreateVm/Ct will do prlsdkApplyConfig, because
we send request to the server only once in this case.
But prlsdkApplyConfig will be called also from
parallelsDomainDefineXML function. There is no problem with
it, parallelsDomainDefineXML will be refactored later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Rewrite code, which applies domain configuration given
to virDomainDefineXML function to the VM of container
registered in PCS.
This code first check if there are unsupported parameters
in domain XML and if yes - reports error. Some of such
parameters are not supported by PCS, for some - it's not
obvious, how to convert them into PCS's corresponding params,
so let's put off it, and implement only basic params in
this patch.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Change domain state using parallels SDK functions instead of
prlctl command.
We don't need to send events from these functions now, becase
events handler will send them. But we still need to update
virDomainObj in privconn->domains.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Subscribe to events from parallels server. It's
needed for 2 things: to update cached domains list
and to send corresponding libvirt events.
Parallels server sends a lot of different events, in
this patch we handle only some of them. In the future
we can handle for example, changes in a host network
configuration or devices states.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about domains using parallels sdk instead of prlctl.
prlsdkLoadDomains functions behaves as former parallelsLoadDomains with
NULL as second parameter (name) - it fills parallelsConn.domains list.
prlsdkLoadDomain is now able to update specified domain by given
virDomainObjPtr.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add files parallels_sdk.c and parallels_sdk.h for code
which works with SDK, so libvirt's code will not mix with
dealing with parallels SDK.
To use Parallels SDK you must first call PrlApi_InitEx function,
and then you will be able to connect to a server with
PrlSrv_LoginLocalEx function. When you've done you must call
PrlApi_Deinit. So let's call PrlApi_InitEx on first .connectOpen,
count number of connections and deinitialize, when this counter
becomes zero.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
