Move stat and mkdir to virFileMakePathHelper.
Also use the stat result to detect whether the existing path
is a directory and set errno accordingly if it's not.
When no <seclabel> is present in the XML, the virDomainSeclabelDef
struct is left as all zeros. Unfortunately, this means it gets setup
as type=dynamic, with relabel=no, which is an illegal combination.
Change the 'bool relabel' attribute in virDomainSeclabelDef to
the inverse 'bool norelabel' so that the default initialization
is sensible
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/security/security_apparmor.c, src/security/security_selinux.c:
Replace 'relabel' with 'norelabel'
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.
Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach
Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()
domain.rng, network.rng, and interface.rng already use a few of the
same types (or in some cases *should* but don't), and an upcoming code
change will have them sharing even more. To prepare for that, this
patch takes those common data type definitions and moves them into
basictypes.rng.
This may break some rule about the need to RNG files to be autonomous
or something, but I saw that storageencryption.rng is used in this
way, so I figured it must not be completely against the law...
Although most functions with flags check to verify no application is
passing in flag bits that are currently undefined, for some reason
this function wasn't.
* Change all flags args from int to unsigned int
* Allow passing flags in virDomainObjParseFile (and propogate those
flags all the way down the call chain). Previously the flags were
hardcoded (to VIR_DOMAIN_XML_INTERNAL_STATUS) several layers down
the chain. Pass that value in at the one place that is currently
calling virDomainObjParseFile.
virFileMakePath returns an errno value on error, that will never
be negative. An virFileMakePath error would have been ignored here,
instead of being reported correctly.
The struct A {} A; construct triggers a linker error on OSX about
duplicate symbols. This also differs from the common struct style.
Switch to common style to fix this.
Reported by Justin Clift.
Add a new attribute to the <seclabel> XML to allow resource
relabelling to be enabled with static label usage.
<seclabel model='selinux' type='static' relabel='yes'>
<label>system_u:system_r:svirt_t:s0:c392,c662</label>
</seclabel>
* docs/schemas/domain.rng: Add relabel attribute
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
the 'relabel' attribute
* src/qemu/qemu_process.c: Unconditionally clear out the
'imagelabel' attribute
* src/security/security_apparmor.c: Skip based on 'relabel'
attribute instead of label type
* src/security/security_selinux.c: Skip based on 'relabel'
attribute instead of label type and fill in <imagelabel>
attribute if relabel is enabled.
Normally the dynamic labelling mode will always use a base
label of 'svirt_t' for VMs. Introduce a <baselabel> field
in the <seclabel> XML to allow this base label to be changed
eg
<seclabel type='dynamic' model='selinux'>
<baselabel>system_u:object_r:virt_t:s0</baselabel>
</seclabel>
* docs/schemas/domain.rng: Add <baselabel>
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
of base label
* src/qemu/qemu_process.c: Don't reset 'model' attribute if
a base label is specified
* src/security/security_apparmor.c: Refuse to support base label
* src/security/security_selinux.c: Use 'baselabel' when generating
label, if available
virStorageBackendCreateRaw: createRawFile already reported the
exact error.
Before the fix:
error: Failed to create vol vol-create.img
error: cannot create path '/var/lib/libvirt/images/vol-create.img': Unknown error 18446744073709551597
After the fix:
error: Failed to create vol vol-create.img
error: cannot fill file '/var/lib/libvirt/images/vol-create.img': No space left on device
Coverity detected that we could crash on bogus input. Meanwhile,
strtok_r is rather heavy compared to strchr.
* src/storage/storage_backend_iscsi.c (virStorageBackendIQNFound):
Check for parse failure, and use lighter-weight functions.
Detected by Coverity. qemuDomainEventQueue requires a non-NULL
pointer; most callers silently drop the event if we encountered
and OOM situation trying to create the event.
* src/qemu/qemu_migration.c (qemuMigrationFinish): Check for OOM.
Coverity noted that most clients reacted to failure to hash; but in
a best-effort kill loop, we can ignore failure.
* src/util/cgroup.c (virCgroupKillInternal): Ignore hash failure.
Coverity noted that 4 out of 5 calls to virNetClientStreamRaiseError
checked the return value. This case expects a particular value, so
warn if our expectations went wrong due to some bug elsewhere.
* src/rpc/virnetclient.c (virNetClientCallDispatchStream): Warn on
unexpected scenario.
Coverity warns if the majority of callers check a function for
errors, but a few don't; but in qemu_audit and qemu_domain, the
choice to not check for failures was safe. In qemu_command, the
failure to generate a uuid can only occur on a bad pointer.
* src/qemu/qemu_audit.c (qemuAuditCgroup): Ignore failure to get
cgroup controller.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitor)
(qemuDomainObjEnterMonitorWithDriver): Ignore failure to get
timestamp.
* src/qemu/qemu_command.c (qemuParseCommandLine): Check for error.
Detected by Coverity. The leak is on an error path, but I'm not
sure whether that path is likely to be triggered in practice.
* src/rpc/virnetserverservice.c (virNetServerServiceAccept): Plug leak.
Spotted by Coverity. If we don't update tmp each time through
the loop, then if the filter being removed was not the head of
the list, we accidentally lose all filters prior to the one we
wanted to remove.
* src/rpc/virnetserverclient.c (virNetServerClientRemoveFilter):
Don't lose unrelated filters.
Detected by Coverity. Some, but not all, error paths were clean;
but they were repetitive so I refactored them.
* src/util/pci.c (pciGetDevice): Plug leak.
To avoid regressions, we let callers specify whether to require a
minor and micro version. Callers that were parsing uname() output
benefit from defaulting to 0, whereas callers that were parsing
version strings from other sources should not change in behavior.
* src/util/util.c (virParseVersionString): Allow caller to choose
whether to fail if minor or micro is missing.
* src/util/util.h (virParseVersionString): Update signature.
* src/esx/esx_driver.c (esxGetVersion): Update callers.
* src/lxc/lxc_driver.c (lxcVersion): Likewise.
* src/openvz/openvz_conf.c (openvzExtractVersionInfo): Likewise.
* src/uml/uml_driver.c (umlGetVersion): Likewise.
* src/vbox/vbox_MSCOMGlue.c (vboxLookupVersionInRegistry):
Likewise.
* src/vbox/vbox_tmpl.c (vboxExtractVersion): Likewise.
* src/vmware/vmware_conf.c (vmwareExtractVersion): Likewise.
* src/xenapi/xenapi_driver.c (xenapiGetVersion): Likewise.
Reported by Matthias Bolte.
According to the automake manual, CPPFLAGS (aka INCLUDES, as spelled
in automake 1.9.6) should only include -I, -D, and -U directives; more
generic directives like -Wall belong in CFLAGS since they affect more
phases of the build process. Therefore, we should be sticking CFLAGS
additions into a CFLAGS container, not a CPPFLAGS container.
* src/Makefile.am (libvirt_driver_vmware_la_CFLAGS): Use AM_CFLAGS.
(INCLUDES): Move CFLAGS items...
(AM_CFLAGS): ...to their proper location.
* python/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
* tests/Makefile.am (INCLUDES, AM_CFLAGS): Likewise.
(commandtest_CFLAGS, commandhelper_CFLAGS)
(virnetmessagetest_CFLAGS, virnetsockettest_CFLAGS): Use AM_CFLAGS.
linux 3.0 has no micro version number, and that is causing problems
for virParseVersionString. The patch below should allow for:
major
major.minor
major.minor.micro
If major or minor are not present they just default to zero.
We found this in Ubuntu (https://bugs.launchpad.net/bugs/802977)
Detected by Coverity. No real harm in leaving these, but fixing
them cuts down on the noise for future analysis.
* src/rpc/virnetserver.c (virNetServerAddService): Delete unused
entry.
* src/util/sysinfo.c (virSysinfoRead): Delete dead assignment to
base.
EXTRA_DIST files should unconditionally be part of the tarball,
rather than depending on the presence of sanlock-devel.
Meanwhile, parallel builds could fail if we don't use mkdir -p.
* src/Makefile.am (EXTRA_DIST): Always ship sanlock .aug and
template .conf files.
(%-sanlock.conf): Use MKDIR_P.
For good or for bad, I did a fresh checkout, ./autogen.sh, then
'configure', then 'make syntax-check', and was surprised that it
failed. Running 'make' before 'make syntax-check' cleaned up the
issue, but this patch makes it work up front.
* cfg.mk (sc_po_check): Add prerequisites.
Based on Coverity's finding on the previous patch, I audited
gnulib's pipe2 code and found that we had the potential for
a subtle double-close bug, unless gnulib guarantees that the
contents of the fd array are unchanged on pipe2() failure.
* .gnulib: Update to latest, for pipe2 fix.
Detected by Coverity. Both are instances of bad things happening
if pipe2 fails; the virNetClientNew failure could free garbage,
and virNetSocketNewConnectCommand could close random fds.
Note: POSIX doesn't guarantee the contents of fd[0] and fd[1]
after pipe failure: http://austingroupbugs.net/view.php?id=467
We may need to introduce a virPipe2 wrapper that guarantees
that on pipe failure, the fds are explicitly set to -1, rather
than our current state of assuming the fds are unchanged from
their value prior to the failed pipe call.
* src/rpc/virnetclient.c (virNetClientNew): Initialize variable.
* src/rpc/virnetsocket.c (virNetSocketNewConnectCommand):
Likewise.
Detected by Coverity. info.nrVirtCpu is unsigned short, but if
cpumaplen is int, then the product of the two in vshMalloc risks
unintended sign extension. cmdVcpuinfo had already solved this
by using size_t cpumaplen.
* tools/virsh.c (cmdVcpuPin): Use correct type.
The virDomainMigratePrepareTunnel3 impl in the remote driver
was using the procedure number for the virDomainMigratePrepareTunnel
method. This doesn't work out so well, because it makes the server
ignore & drop all stream packets
* src/remote/remote_driver.c: Fix procedure for PrepareTunnel3
We ignore any stream data packets which come in for streams which
are not registered, since these packets are async and do not have
a reply. If we get a stream control packet though we must send back
an actual error, otherwise a (broken) client may hang forever
making it hard to diagnose the client bug.
* src/rpc/virnetserverprogram.c: Send back error for unexpected
stream control messages
If a message packet for a invalid stream is received it is just
free'd. This is not good because it doesn't let the client RPC
request counter decrement. If a stream is shutdown with pending
packets the message also isn't released properly because of an
incorrect header type
* daemon/stream.c: Fix message header type
* src/rpc/virnetserverprogram.c: Send dummy reply instead of
free'ing ignored stream message
