Merge cancel and cancelPostCopy sections with the generic error section,
where we can easily decide whether canceling the ongoing migration is
required.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let cleanup only do things common to both failure and success paths and
move error handling code inside the new "error" section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some code which was supposed to be executed only when migration
succeeded was buried inside the cleanup code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new job state it's useful to let the compiler complain
about places where we need to think about what to do with the new
state.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We need to format alias even for inactive XMLs since that's the
way how users are going to identify their devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The point of this test is to load live XML and test hotplug. But
even though the XMLs we are parsing are live, the parsing is done
with VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The qemuxml2argvtest expects the domain XMLs to be inactive ones.
Therefore we should pass inactive XMLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since we will be allowing users to set device aliases and memory
devices are fragile when it comes to aliases we have to make sure
they won't change during migration. Other devices should be fine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
They have to be unique within the domain. As usual, backwards
compatibility takes its price. In this particular situation we
have a device that is represented twice in a domain and so is its
alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If driver that is calling the parse supports user supplied
aliases, they can be parsed even for inactive XMLs. However, to
avoid any clashes with aliases that libvirt generates, the user
ones have to have "ua-" prefix.
Note, that some drivers don't have notion of device aliases at
all. Also, in order to support user supplied aliases some extra
checks need to be done (e.g. during hotplug). Therefore we can't
just enable this feature for all the drivers. Thus we need a flag
that drivers set to tell parsing code that they can handle user
supplied device aliases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When assigning alias to a device we usually iterate over other
devices of its kind trying to find next index. We do this by
stripping down the prefix and then parsing number at the end,
Usually, if the prefix doesn't match the one we are expecting, we
just continue with next iteration. Except for couple of
functions: qemuGetNextChrDevIndex(),
qemuAssignDeviceRedirdevAlias() and qemuAssignDeviceShmemAlias().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by 6094d6ec7f.
Found by running libvirt-perl tests.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The function virEventRegisterImpl() checks the attempt to replace the
registered events. But there is a duplicate variable inside the IF statement.
The variable 'removeHandleImpl' was wrongly repeated. One of them needs to be
replaced by 'removeTimeoutImpl'.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The only remaining user of qemuMonitorGetMigrationCapability is our test
suite. Let's replace qemuMonitorGetMigrationCapability with
qemuMonitorGetMigrationCapabilities there and drop the unused function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All calls to qemuMonitorGetMigrationCapability in QEMU driver are
replaced with qemuMigrationCapsGet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Each time we need to check whether a given migration capability is
supported by QEMU, we call query-migrate-capabilities QMP command and
lookup the capability in the returned list. Asking for the list of
supported capabilities once when we connect to QEMU and storing the
result in a bitmap is much better and we don't need to enter a monitor
just to check whether a migration capability is supported.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new function is called qemuProcessInitMonitor and it will enter/exit
the monitor so that the caller doesn't have to deal with this.
The goal of this patch is to simplify the code in qemuConnectMonitor
which would otherwise be a bit hairy after the following patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than a forward linked list, let's use the virHashTable in
order to manage the objsName data.
Requires numerous changes from List to Object management similar to
many other drivers/vir*obj.c modules
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
Since the encryption information can also be disk source specific
move it from qemuDomainDiskPrivate to qemuDomainStorageSourcePrivate
Since the last allocated element from qemuDomainDiskPrivate is
removed, that means we no longer need qemuDomainDiskPrivateDispose.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the secret information is really virStorageSource specific
piece of data, let's manage the privateData from there instead of
at the Disk level.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add the object definition and helpers to store security-related private
data for virStorageSources.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Introduce the bare necessities to add privateData to _virStorageSource.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When commit id 'da86c6c22' added support for diskPriv->encinfo in
qemuDomainSecretDiskPrepare a change to qemuDomainSecretDiskDestroy
to was missed. Although qemuDomainDiskPrivateDispose probably would
do the trick.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1495511
When creating new /dev for domain ran in namespace we try to
preserve all sub-mounts of /dev. Well, not quite all. For
instance if /dev/foo/bar and /dev/foo are both mount points, only
/dev/foo needs preserving. /dev/foo/bar is preserved with it too.
Now, to identify such cases like this one STRPREFIX() is used.
That is not good enough. While it works for [/dev/foo/bar;
/dev/foo] case, it fails for [/dev/prefix; /dev/prefix2] where
the strings share the same prefix but are in fact two different
paths. The solution is to use STRSKIP().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This function is going to make decisions based on the features
set per each driver. For that we need the virDomainXMLOption
object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Let's move all the virAsprintf()-s into separate functions for
better structure of the code. Later, when somebody wants to
generate a device alias, all they need is to expose the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have a special function for assigning aliases to RNG devices.
Use that instead of plain virAsprintf().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It looks like the error message was copied from virsh, because
that's where we have @ctl. Nevertheless, it's @flags which is
invalid, not @ctl.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Back in the times of using 'pci_del', unplugging a device without
a PCI address was not wired up.
After completely removing support for qemu without QEMU_CAPS_DEVICE,
aliases are used to uniquely identify devices in all cases.
Remove the pointless validation of data that was already present
in the domain definition.
