Modify some existing tests of network-based disks to omit the storage
format specification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit f80eae8c2a I was too agresive in removing properties of
-drive for empty drives. It turns out that qemu actually persists the
state of 'readonly' and the throttling information even for the empty
drive.
Removing 'readonly' thus made qemu open any subsequent images added via
the 'change' command as RW which was forbidden by selinux thanks to the
restrictive sVirt label for readonly media.
Fix this by formating the property again and bump the tests and leave a
note detailing why the rest of the properties needs to be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This shows users can now use PCI for RISC-V guests, as long
as they opt into it by manually assigning addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the password stored in the secret driver under
the uuid specified by the vnc_tls_x509_secret_uuid
option in qemu.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1602418
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If a -drive has no image, using image properties makes qemu whine that
they should not be used.
This patch stops formating cache/readonly/... for empty drives
for the pre-blockdev syntax. Unfortunately those parameters can't be
added later when inserting media, but on the other hand qemu will start
with an empty drive.
Since we already were able to start a VM with such config previously due
to qemu ignoring them I've opted just to skip formatting them.
Additionally with -blockdev support it will work as expected as the
image properties will be formatted when adding the image itself which is
not possible without it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1651457
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Upcomming change will influence CDROM with cache mode so add a test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
According to the result parsing from xml, add the unarmed property
into QEMU command line:
-device nvdimm,...[,unarmed=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add pmem property
into QEMU command line:
-object memory-backend-file,...[,pmem=on]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to the result parsing from xml, add align property
into QEMU command line:
-object memory-backend-file,...[,align=xxx]
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Deprecate DO_TEST to do nvdimm qemuxml2argvdata tests, because
DO_TEST_CAPS_LATEST is a better choice. The DO_TEST needs
to specify all qemu capabilities and is not easy for scaling.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624223
There are two ways to request memory preallocation on cmd line:
-mem-prealloc and .prealloc attribute for a memory-backend-file.
However, as it turns out it's not safe to use both at the same
time. If -mem-prealloc is used then qemu will fully allocate the
memory (this is done by actually touching every page that has
been allocated). Then, if .prealloc=yes is specified,
mbind(flags = MPOL_MF_STRICT | MPOL_MF_MOVE) is called which:
a) has to (possibly) move the memory to a different NUMA node,
b) can have no effect when hugepages are in play (thus ignoring user
request to place memory on desired NUMA nodes).
Prefer -mem-prealloc as it is more backward compatible
compared to switching to "-numa node,memdev= + -object
memory-backend-file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Depending on whether QEMU actually supports the option, we can put the
'rendernode' on the '-display egl-headless' cmdline.
https://bugzilla.redhat.com/show_bug.cgi?id=1628892
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Up until now, we formatted 'rendernode=' onto QEMU cmdline only if the
user specified it in the XML, otherwise we let QEMU do it for us. This
causes permission issues because by default the /dev/dri/renderDX
permissions are as follows:
crw-rw----. 1 root video
There's literally no reason why it shouldn't be libvirt picking the DRM
render node instead of QEMU, that way (and because we're using
namespaces by default), we can safely relabel the device within the
namespace.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).
A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.
The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We should ensure that QEMU supports zPCI when a zPCI address is defined
in XML and otherwise report an error. This patch introduces a generic
validation function qemuDomainDeviceDefValidateAddress() which calls
qemuDomainDeviceDefValidateZPCIAddress() if address type is PCI address.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit ed5aa85f37
qemu: don't use chardev FD passing for vhostuser backend
altered the legacy DO_TEST macro.
Run the test against capabilities of QEMU 2.5.0 (which did not
support QEMU_CAPS_CHARDEV_FD_PASS) as well as the latest version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Test CCID smartcard passthrough from a unix listen socket.
Use the capabilities of QEMU 2.5.0 which did not support
chardev FD passing and the latest one, which (at the time
of this commit) it does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Attempting to use a chardev definition like
<serial type='unix'>
<target type='isa-serial'/>
</serial>
correctly results in an error being reported, since the source
path - a required piece of information - is missing; however,
the very similar
<serial type='unix'>
<target type='pci-serial'/>
</serial>
was happily accepted by libvirt, only to result in libvirtd
crashing as soon as the guest was started.
The issue was caused by checking the chardev's targetType
against whitelisted values from virDomainChrChannelTargetType
without first checking the chardev's deviceType to make sure
it is actually a channel, for which the check makes sense,
rather than a different type of chardev.
The only reason this wasn't spotted earlier is that the
whitelisted values just so happen to correspond to USB and
PCI serial devices and Xen and UML consoles respectively,
all of which are fairly uncommon.
https://bugzilla.redhat.com/show_bug.cgi?id=1609720
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1622455
If a domain is configured to use <source type='file'/> under
<memoryBacking/> we have to honour that setting and produce
-mem-path on the command line. We are not doing so if domain has
no guest NUMA nodes nor hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new tests use DO_TEST_CAPS_ARCH_LATEST() with an input
XML describing a very simple headless guest and cover most
architectures and machine types we care about.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-serial is an alias for virtio-serial-pci, which
should not have been used for a PCIe-less aarch64/virt
guest but it ended up being used anyway because the
virtio-mmio capability was missing and the algorithm
is buggy.
Fix the test case so that we can fix the algorithm next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 6534b3c4 tried to raise an error when there is no numa
nodes by setting access='shared' in the domain config, but added
a helper called from qemuDomainDeviceDefValidate instead of a
helper called from qemuDomainDefValidate for XML:
<memoryBacking>
<hugepages/>
<access mode='shared'/>
</memoryBacking>
Since there are no memory devices in the test XML, there would
be no validation failure, but the test added was still failing.
Investigating that it turns out that unnecessary XML elements
were causing the failure (no need for <video>, <graphics>,
<pm>, usb controller model "piix3-uhci", disk attribute for
"discard='unmap'", <serial>, <console>, <channel> and a
memballoon model). Removing all those before moving the method
caused the test to succeed.
So this patch moves the validation to the right place and
removes all the unnecessary XML pieces that were causing
a false validation failure.
https://bugzilla.redhat.com/show_bug.cgi?id=1448149#c14
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The architecture is new enough that we don't need to
concern ourselves with backwards compatibility in any
capacity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'metadata' and 'leases' are features internal to libvirt and thus don't
influence the generated QEMU command line. As they are not tested we
don't need the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now we assume the flag always so there's no use for this test. Probably
a leftover from the cleanup of the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The test files were unused, but we don't have any other test for this
feature. Make use of the existing files by removing disks and using
DO_TEST_CAPS_LATEST to execute them. The legacy output files will be
dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
aarch64-acpi-nouefi and hostdev-scsi-boot are unused. Noticed when
checking whether '-nodefconfig' is still used by libvirt.
Unused since their introduction in commit deb38c4 and bab6ee6
respectively.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemus support FD passing so modify the tests to test the
proper code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.
Add XML formatter, parser, schema and docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data for nested backing chains with/without indexes (used in
status XMLs) which will excercise blockdev and the related work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockdev support will change existing approach to add disks to VMs
so all tests using the DO_TEST_CAPS_LATEST approach which have any disks
need to be forked so that the changes can be applied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to test SEV we need real QEMU capabilities. Ideally, this would
be tested with -latest capabilities, however, our capabilities are
currently tied to Intel HW, even the 2.12.0 containing SEV were edited by
hand, so we can only use that one for now, as splitting the capabilities
according to the vendor is a refactor for another day. The need for real
capabilities comes from the extended SEV platform data (PDH, cbitpos,
etc.) we'll need to cache/parse.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Previously we were ignoring "nodeset" attribute for hugepage pages
if there was no guest NUMA topology configured in the domain XML.
Commit <fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5> partially fixed
that issue but it introduced a somehow valid regression.
In case that there is no guest NUMA topology configured and the
"nodeset" attribute is set to "0" it was accepted and was working
properly even though it was not completely valid XML.
This patch introduces a workaround that it will ignore the nodeset="0"
only in case that there is no guest NUMA topology in order not to
hit the validation error.
After this commit the following XML configuration is valid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
but this configuration remains invalid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
<page size='1048576' unit='KiB'/>
</hugepages>
</memoryBacking>
The issue with the second configuration is that it was originally
working, however changing the order of the <page> elements resolved
into using different page size for the guest. The code is written
in a way that it expect only one page configured and always uses only
the first page in case that there is no guest NUMA topology configured.
See qemuBuildMemPathStr() function for details.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591235
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This use-case was broken by commit
<fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5>.
We allowed this configuration and it was working as expected therefore
we can consider it as regression. We should have never allowed such
configuration so now the best solution is in case of non-numa guest
silently ignore the 'nodeset' attribute if it's set to '0'.
That will be fixed by following patches.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This test case is currently working but it uncovers existing issue
in our code that the generated QEMU commandline uses the default 1G
hugepage instead of the 2M hugepage specified for exact node.
The issue in our code is that for non-numa guests we take into account
only the first hugepage. This will be fixed as invalid configuration
since it doesn't make any sense to set default and specific hugepage
for non-numa guest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove unnecessary XML elements as well.
<numatune> for numa guest is tested by numatune-memnode test.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
From the args output you can see that the 'discard' feature is not
honored if you don't use hugepages, that is a bug, following patche
will fix it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Starting from pc-q35-2.4 the floppy controller is not enabled by
default. Fix the version check so that it does not match 2.11 as being
2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix regression introduced in <42fd5a58adb>. With q35 machine type which
requires the explicitly specified FDC we'd format twoisa-fdc
controllers to the command line as the code was moved to a place where
it's called per-disk.
Move the call back after formatting all disks and reiterate the disks to
find the floppy controllers.
This also moves the '-global' directive which sets up the default
ISA-FDC to the end after all the disks but since we are modifying the
properties it is safe to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The floppy drive command line is different on the q35 machine. Make sure
to test that both drives are supported and also multiple machine
versions as we generate the commandline differently.
Note that both output files show wrong command line which will be fixed
subsequently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We should still make an effort to fill in data, just not raise
an error if say an ostype/virttype combo disappeared from caps.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have several cases when a VM has multiple disks in the test files so
having another one without any interesting configuration is not
necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the authentication and ipv6 cases into the main test file. To allow
removal of the separate testing of the secure credential passing via the
'secret' object in qemu, use the DO_TEST_CAPS_VER macro with version
2.5.0 when the secret object is not supported by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The xml2argv variant was unused. The xml2xml variant is redundant in
other tests for RBD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move various different iSCSI configuration into one test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'unsafe' cache test into 'disk-cache' and remove all the
individual cases for one cache mode each.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll aggregate testing of all cache modes in this test later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify most of the tests into a common test named disk-cdrom-network by
adding multiple cdroms. The 'http' test is dropped since there can be
only 4 cdroms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Few disk tests were testing support for pure -drive command line
generation for disks now that we assume it for all qemu versions the
cases are obsolete.
Replacements:
disk-readonly-no-device -> disk-readonly-disk
disk-floppy-tray-no-device -> disk-floppy-tray
disk-cdrom-tray-no-device -> disk-cdrom-tray
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We also have disk-copy_on_read.xml which also tests the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.12, QEMU understands a new vfio-pci device option 'display'
which can be used to turn on display capabilities on vgpu-enabled
mediated devices, IOW emulated GPU devices like QXL will no longer be
needed with vgpu-enable mdevs.
QEMU defaults to 'auto' for the 'display' attribute, which is not
foolproof, so we need to play it safe here and default to display='off'
if this attribute wasn't provided in the XML explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').
This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The tls, x509 and x509verify options were deprecated in QEMU v2.5.0:
commit 3e305e4a4752f70c0b5c3cf5b43ec957881714f7
Author: Daniel P. Berrange <berrange@redhat.com>
ui: convert VNC server to use QCryptoTLSSession
Use the tls-creds-x509 object when available.
https://bugzilla.redhat.com/show_bug.cgi?id=1598167
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a test with QEMU 2.4.0 capabilites, as well as the latest caps.
The code paths for formatting TLS options will be altered and
2.4.0 is the newest version where QEMU_CAPS_OBJECT_TLS_CREDS_X509
is not supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the new proper location for the read/write error policy selection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add output arguments generated with the latest qemu capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add multiple drives with the various configurations rather than having
multiple tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are testing character devices so the disk is not necessary. Minimize
the configuration. This will prevent changes when switching to blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU uses a shorthand '-sdl' which maps to '-display sdl'. However, if
there are any options to be passed to SDL, the full command version must
be used. Everything seemingly worked for us until commit 5038b30043
introduced OpenGL support for SDL and added ',gl=on/off' option which as
mentioned above could have never worked with the shorthand version of
the command. Indeed starting a domain with an SDL display and OpenGL
enabled, QEMU produces a rather cryptic error:
-sdl: Could not open 'gl=on': No such file or directory
This patch provides fixes to both the SDL cmdline generation and the
test suite.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When support was adding for passing a pre-opened listener socket to UNIX
chardevs, it accidentally passed the listener socket for client mode
chardevs too with predictable amounts of fail resulting. This affects
libvirt when using QEMU >= 2.12
Expand the unit test coverage to validate that we are only doing FD
passing when operating in server mode.
https://bugzilla.redhat.com/show_bug.cgi?id=1598440
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU chardevs have a bug which makes the vhostuser backend complain
about lack of support for FD passing when validating the chardev.
While this is ultimately QEMU's responsibility to fix, libvirt needs to
avoid tickling the bug.
Simply disabling chardev FD passing just for vhostuser's chardev is
the most prudent approach, avoiding need for a QEMU version number
check.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we format the serial, geometry and error policy on the -drive
backend argument.
QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.
We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.
Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add comma escaping for netsource. This is done here because
qemuBuildNetworkDriveStr has other external callers which
may not expect an escaped comma; however, this particular
command building path needs to perform the escaping for the
hostdev command line, so we do it now to ensure src->path
and src->host->name are covered.
Signed-off-by: Anya Harter <aharter@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
VMs with hardcoded platform network devices are forced to use old
style '-net nic' command line config. Current we use qemu's vlan
option to hook this with the '-netdev' host side of things.
However since qemu 1.2 there is '-net nic,netdev=X' option for
explicitly referencing a netdev ID, which is more inline with
typical VM commandlines, so let's switch to that
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add comma escaping for cfg->spiceTLSx509certdir and
graphics->data.spice.rendernode.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for smartcard->data.cert.file[i] and
smartcard->data.cert.database.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for dev->data.file.path in cases
VIR_DOMAIN_CHR_TYPE_DEV and VIR_DOMAIN_CHR_TYPE_PIPE.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add test case explicitly defining a smartcard host certificates
database via the following xml:
<smartcard mode='host-certificates'>
<database>/tmp/foo</database>
</smartcard>
This case is not currently covered in the test suite.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adjust the documentation, parser and tests to change:
launch-security -> launchSecurity
reduced-phys-bits -> reducedPhysBits
dh-cert -> dhCert
Also fix the headline in formatdomain.html to be more generic,
and some leftover closing elements in the documentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU >= 2.12 provides 'sev-guest' object which is used to launch encrypted
VMs on AMD platform using SEV feature. The various inputs required to
launch SEV guest is provided through the <launch-security> tag. A typical
SEV guest launch command line looks like this:
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 ...\
-machine memory-encryption=sev0 \
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid problems with test cases specifying an alias machine type which
would change once capabilities for a newer version are added strip all
alias machine types for the DO_TEST_CAPS_LATEST based tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Format probing will be dropped so remove the tests which will become
obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds extensions to existing test cases and specific test cases
for the tpm-emulator.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default NBD TLS certificate path varies based on prefix given to
configure, causing tests to fail depending on build options.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a race condition when spawning QEMU where libvirt has spawned
QEMU but the monitor socket is not yet open. Libvirt has to repeatedly
try to connect() to QEMU's monitor until eventually it succeeds, or
times out. We use kill() to check if QEMU is still alive so we avoid
waiting a long time if QEMU exited, but having a timeout at all is still
unpleasant.
With QEMU 2.12 we can pass in a pre-opened FD for UNIX domain or TCP
sockets. If libvirt has called bind() and listen() on this FD, then we
have a guarantee that libvirt can immediately call connect() and
succeed without any race.
Although we only really care about this for the monitor socket and agent
socket, this patch does FD passing for all UNIX socket based character
devices since there appears to be no downside to it.
We don't do FD passing for TCP sockets, however, because it is only
possible to pass a single FD, while some hostnames may require listening
on multiple FDs to cover IPv4 and IPv6 concurrently.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add code that will handle the managed persistent reservations object
separately from the unmanaged one. There is only one managed object so
handling it with disks is awkward and does not scale well when backing
chains come into view.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.
Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.
This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the 'vxhs' suffix so other network protocols using TLS can be
put into the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the disk encryption type to qcow2+luks so that the appropriate
secret objects are generated. This tests that the proper alias is used
for the passphrase secret object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk encryption part is no way relevant to the rest of the test so
drop it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Create a new vsock endpoint by opening /dev/vhost-vsock,
set the requested CID via ioctl (or assign a free one if auto='yes'),
pass the file descriptor to QEMU and build the command line.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
If the domain requests usage of the genid functionality,
then add the QEMU '-device vmgenid' to the command line
providing either the supplied or generated GUID value.
Add tests for both a generated and supplied GUID value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The VM Generation ID is a mechanism to provide a unique 128-bit,
cryptographically random, and integer value identifier known as
the GUID (Globally Unique Identifier) to the guest OS. The value
is used to help notify the guest operating system when the virtual
machine is executed with a different configuration.
This patch adds support for a new "genid" XML element similar to
the "uuid" element. The "genid" element can have two forms "<genid/>"
or "<genid>$GUID</genid>". If the $GUID is not provided, libvirt
will generate one and save it in the XML.
Since adding support for a generated GUID (or UUID like) value to
be displayed modifying the xml2xml test to include virrandommock.so
is necessary since it will generate a "known" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1534418
Just like ec982f6d92 denies hugepages for non-existent
guest NUMA nodes in case there are some nodes configured.
Unfortunately, when there are none, qemuBuildNumaArgStr() is not
called and thus we have to have check in qemuBuildMemPathStr()
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The JSON property generator should not escape commas as we do on the
command line. The JSON->commandline generator already does that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have to escape commas when formatting them on the command line. Add a
test case of a TLS path containing a comma.
Note that the output is wrong, this test case is to prove there's a bug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.
Drop the attribute and adjust the code accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Support OpenGL when using SDL backend via -sdl,gl=on. Add associated
tests.
NB: Usage of DO_TEST_CAPS_LATEST in qemuxml2argv doesn't work in
this case because -sdl gl is not introspectable.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Generates the QEMU command line for the vfio-ccw device.
Adds various functionality testing for vfio-ccw in libvirt:
1. Generation of QEMU command line from domain xml file
2. Generation of dump xml from domain xml file
3. Checks duplicate/invalid addresses for vfio-ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1480668
QEMU has this new feature memory-backend-file.discard-data=yes
which is a nifty optimization. Basically, when qemu is quitting
or on memory hotplug it calls munmap() and close() on the file
that is backing the memory. However, this does not mean kernel
won't stop touching that part of memory. It still might. With
this feature enabled we tell kernel: "we don't need this memory
nor data stored in it". This makes kernel drop the memory
immediately without trying to sync memory with the mapped file.
Unfortunately, this cannot be turned on by default because we
can't be sure when users really don't care about what happens to
data after qemu dies. So it has to be opt-in. As usual, there are
three places where one can configure memory attributes. This
patch adds the feature to all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU has possibility to call madvise(.., MADV_REMOVE) in some
cases. Expose this feature to users by new element/attribute
discard.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa1>.
Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.
Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Alter qemuBuildTPMDevStr to format the tpm-crb on the command line
and use the enum range checking for valid model.
Add a test case for the formation of the tpm-crb QEMU device
command line. The qemuxml2argvtest changes cannot use the newer
DO_TEST_CAPS_LATEST since building of the command line involves
calling qemuBuildTPMBackendStr which attempts to open the
path to the device (e.g. /dev/tmp0).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Enable the TPM CRB to be specified in the domain XML. This
now allows to describe the TPM device like this:
<tpm model='tpm-crb'>
<backend type='passthrough'>
<device path='/dev/tpm0'/>
</backend>
</tpm>
Extend the XML schema to also allow tpm-crb.
Extend the documentation.
Add a test case for testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though we just introduced the rom.enabled attribute to
properly cover the use case, there might be guests out there
that use the only previously available way of disabling PCI
ROM loading by not opting in to schema validation.
To make sure such guests will keep working going forward,
introduce a test case covering the legacy workaround.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1425058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The disk cache mode translates to various frontend and backend
attributes for the qemu block layer. For the frontend device the
'writeback' parameter is used and provided as 'write-cache'. Implement
this so that we can later switch to using -blockdev where we will not
pass the cachemode directly any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Prepare the tests for adding the new parameter. The parameter was
introduced in qemu-2.7.0, so add a forked version of the test case to
see that it is formatted properly.
This test is also an example how the new testing macros should be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If QEMU uses a seccomp blacklist (since 2.11), -sandbox on
no longer tries to whitelist all the calls, but uses sets
of blacklists:
default (always blacklisted with -sandbox on)
obsolete (defaults to deny)
elevateprivileges (setuid & co, default: allow)
spawn (fork & execve, default: allow)
resourcecontrol (setaffinity, setscheduler, default: allow)
If these are supported, default to sandbox with all four
categories blacklisted.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This functions contains logic that tries to use vhost for virtio
interfaces, even if <driver name='vhost'/> was not supplied.
In this case, a failure is non-fatal.
On my system, /dev/vhost-net was not accessible to the user running
'make check', but we should not depend on that.
Mock it to prevent accessing /dev/vhost-net and return some predictable
file descriptor numbers instead.
Introduced by commit c1f684e - deprecate QEMU_CAPS_VHOST_NET.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jiří Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Implied by QEMU >= 1.2.0.
Also delete the now redundant disk-drive-copy-on-read test.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The (now assumed) QEMU_CAPS_CHARDEV_SPICEVMC is preferred.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implied by QEMU >= 1.2.0.
Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used
when QEMU_CAPS_NO_USER_CONFIG is unsupported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This makes qemuDomainSupportsNetdev identical to
qemuDomainSupportsNicdev and leaves some code in
qemuDomainAttachNetDevice to be cleaned up later.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until now we have only formatted non-default GIC versions on
the command line, in order to maintain compatibility with older
QEMU versions that didn't implement the gic-version option to
begin with; however, doing so is entirely unnecessary for newer
QEMU versions, where the option is available. Moreover, having
the GIC version formatted on the command line at all times
ensures that QEMU changing its own defaults doesn't affect the
ABI of libvirt guests.
A few test cases are removed to avoid extra churn. It doesn't
matter for coverage, as those scenarios are already covered by
other parts of the test suite.
This patch is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use QEMU_CAPS_MACHINE_OPT and QEMU_CAPS_MACHINE_VMPORT_OPT
since it specifies <vmport state=off/>.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that support for the pcie-to-pci-bridge controller has
been implemented, adding the QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE
capability to the existing test is enough to cause the guest
to use pcie-to-pci-bridge instead of dmi-to-pci-bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This test shows what happens when you add a traditional PCI
device such as pci-serial to a pure PCIe machine type such
as aarch64/virt.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
So build the qemu command line for ccw devices.
Also add test cases for virtio-{keyboard, mouse, tablet}-ccw.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
S390 guests can only support a virtio-gpu-ccw device as a video
device. So set default video model type to VIR_DOMAIN_VIDEO_TYPE_VIRTIO
for S390 guests.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support the virtio-gpu-ccw device,
which can be used as a video device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio-gpu-ccw device.
Let's introduce a new qemu capability for the device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1558317
Similarly to b133fac356 we need to look up alias of CCID
controller when constructing smartcard command line instead of
relying on broken assumption it will always be 'ccid0'. After
user aliases it can be anything.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We're going to use the same test case to exercise all optional
pSeries features, so a more generic name is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552127
When building command line for USB controllers we have to do more
than just put controller's alias onto the command line. QEMU has
concept of these joined USB controllers. For instance ehci and
uhci controllers need to create the same USB bus. To achieve that
the slave controller needs to refer the master controller. This
worked until we've introduced user aliases because both master
and slave had the same alias. With user aliases slave can have
different alias than master. Therefore, when generating command
line for slave we need to look up the master's alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Nobody should use format detection due to security implications. The
result of the change is that 'raw' format will be printed unless
specified explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This change catches an invalid use of the option in our
test suite.
https://bugzilla.redhat.com/show_bug.cgi?id=1483816
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This change catches an invalid use of the option in our
test suite.
https://bugzilla.redhat.com/show_bug.cgi?id=1483816
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This wires up the previously added Chassis strings XML schema to be able to
generate comamnd line args for QEMU. This requires QEMU >= 2.1 release
containing this patch:
SMBIOS: Build aggregate smbios tables and entry point
https://git.qemu.org/?p=qemu.git;a=commit;h=c97294ec1b9e36887e119589d456557d72ab37b5
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This type of information defines attributes of a system
chassis, such as SMBIOS Chassis Asset Tag.
access inside VM (for example)
Linux: /sys/class/dmi/id/chassis_asset_tag.
Windows: (Get-WmiObject Win32_SystemEnclosure).SMBIOSAssetTag
wirhin Windows PowerShell.
As an example, add the following to the guest XML
<chassis>
<entry name='manufacturer'>Dell Inc.</entry>
<entry name='version'>2.12</entry>
<entry name='serial'>65X0XF2</entry>
<entry name='asset'>40000101</entry>
<entry name='sku'>Type3Sku1</entry>
</chassis>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When no GIC version is specified, we currently default to GIC v2;
however, that's not a great default, since guests will fail to
start if the hardware only supports GIC v3.
Change the behavior so that a sensible default is chosen instead.
That basically means using the same algorithm whether the user
didn't explicitly enable the GIC feature or they explicitly
enabled it but didn't specify any GIC version.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Account for the fact that the default might change based on what
GIC versions are supported by QEMU. That's not the case at the
moment, but it will be soon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
These test cases are supposed to verify GIC support works as
expected, and shouldn't concern themselves with other features;
we can trim them down significantly, and make them less likely
to need updating after unrelated changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashes or restarts, the QEMU process should be reconnected to
OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This wires up the previously added OEM strings XML schema to be able to
generate comamnd line args for QEMU. This requires QEMU >= 2.12 release
containing this patch:
commit 2d6dcbf93fb01b4a7f45a93d276d4d74b16392dd
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Sat Oct 28 21:51:36 2017 +0100
smbios: support setting OEM strings table
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 10c73bf1 fixed a bug that I had introduced back in commit
70249927 - if a vhost-scsi device had no manually assigned PCI
address, one wouldn't be assigned automatically. There was a slight
problem with the logic of the fix though - in the case of domains with
pcie-root (e.g. those with a q35 machinetype),
qemuDomainDeviceCalculatePCIConnectFlags() will attempt to determine
if the host-side PCI device is Express or legacy by examining sysfs
based on the host-side PCI address stored in
hostdev->source.subsys.u.pci.addr, but that part of the union is only
valid for PCI hostdevs, *not* for SCSI hostdevs. So we end up trying
to read sysfs for some probably-non-existent device, which fails, and
the function virPCIDeviceIsPCIExpress() returns failure (-1).
By coincidence, the return value is being examined as a boolean, and
since -1 is true, we still end up assigning the vhost-scsi device to
an Express slot, but that is just by chance (and could fail in the
case that the gibberish in the "hostside PCI address" was the address
of a real device that happened to be legacy PCI).
Since (according to Paolo Bonzini) vhost-scsi devices appear just like
virtio-scsi devices in the guest, they should follow the same rules as
virtio devices when deciding whether they should be placed in an
Express or a legacy slot. That's accomplished in this patch by
returning early with virtioFlags, rather than erroneously using
hostdev->source.subsys.u.pci.addr. It also adds a test case for PCIe
to assure it doesn't get broken in the future.
When the -machine pseries,max-cpu-compat=X is supported use
machine parameter instead of -cpu host,compat=X parameter as
that is deprecated now with qemu >= v2.10.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1519146
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1448149
If a domain has no numa nodes, that means we don't put any
memory-backend-file onto the qemu command line. That in turn
means we can't set access='shared'. Therefore, we should produce
an error instead of ignoring the setting silently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 2.7 and newer don't allow guests to start unless the initial
vCPUs count is a multiple of the vCPU hotplug granularity, so
validate it and report an error if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283700
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit id '70249927b' neglected to cover this case because the test
had taken the "shortcut" to already add the <address>; however, when
the PCI address assignment code was adjusted by commit id '70249927'
the vhost-scsi (VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI_HOST) wasn't
covered thus returning a 0 for pciFlags. So I altered the tests too
to make sure it doesn't happen again.
Previously the qemuxml2xmloutdata was a softlink to the source
qemuxml2argvdata, so I unlinked and recreated the output file to
force generation of the adddress. Without the test changes, an
address generation returns:
libvirt: Domain Config error : internal error: Cannot automatically
add a new PCI bus for a device with connect flags 00
if an address was supplied in the test, a restart of libvirtd or
edit of a guest would display the following opaque message:
warning : qemuDomainCollectPCIAddress:1237 :
qemuDomainDeviceCalculatePCIConnectFlags() thinks that the device
with PCI address 0000:00:09.0 should not have a PCI address
where the address is related to the guest PCI address provided.
Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.
Remove the disk and the .args file since the expectation is the test
will fail in qemuxml2argvtest because floppy is not supported on pseries
and thus no disk is necessary and no .args file would be created to
compare against.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Similarly to the previous commit, rename .args files.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that <serial> and <console> on s390/s390x behave a bit more like the
other architectures, remove this extra differentation, and use sclp
console by default for new guests. New virtio consoles can still be
added, and it is actually needed because of the limited number of
instances for sclp and sclplm.
This reverts commit b1c88c1476, whose
reasons are not totally clear.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The existing implementation set the address type for all serial
devices to spapr-vio, which made it impossible to use other devices
such as usb-serial and pci-serial; moreover, some decisions were
made based on the address type rather than the device type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1512934
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Qemu has now an internal mechanism for locking images to fix specific
cases of disk corruption. This requires libvirt to mark the image as
shared so that qemu lifts certain restrictions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378242
Disk sharing between two VMs may corrupt the images if the format driver
does not support it. Check that the user declared use of a supported
storage format when they want to share the disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
Some test cases have the backend tag inside wrong interfaces. The backend xml
tag does not support <interface type='user|direct|hostdev'>. So this commit
changes some network types inside the interfaces that have backend defined.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
Just like in 9324f67a57 we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
