Soon, the minimal version of QEMU is going to be bumped to 5.2.0.
Drop test cases that require older version.
NB, iothreads-disk-virtio-ccw test is removed completely as we
already have plenty of other tests covering the same code paths.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The disk-network-tlsx509-vxhs.xml file will be removed soon. Drop
the test case in qemusecuritytest that relies on it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As I don't have a sparc machine handy add emulated capabilities.
This patch is in preparation for bumping minimum qemu version beyond the
oldest 'sparc' caps we currently have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since -netdev user can be disabled during QEMU compilation, we
can't blindly expect it to just be there. We need a capability
that tracks its presence.
For qemu-4.2.0 we are not able to detect the capability so do the
next best thing - assume the capability is there. This is
consistent with our current behaviour where we blindly assume the
capability, anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The inspiration for these rules comes from
qemuValidateDomainDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While it's very unlikely to have QEMU that supports SEV-SNP but
doesn't support plain SEV, for completeness sake we ought to
query SEV capabilities if QEMU supports either. And similarly to
QEMU_CAPS_SEV_GUEST we need to clear the capability if talking to
QEMU proves SEV is not really supported.
This in turn removes the 'sev-snp-guest' capability from one of
our test cases as Peter's machine he uses to refresh capabilities
is not SEV capable. But that's okay. It's consistent with
'sev-guest' capability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Soon, QEMU_CAPS_SEV_SNP_GUEST is going to be dependant on more
than plain presence of "sev-snp-guest" object in QEMU. Explicitly
enable the capability for "launch-security-sev-snp" test so that
we can continue testing cmd line and xml2xml.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
An iSCSI device with zero hosts will result in a segmentation fault. This patch
adds a check for the number of hosts, which must be one in the case of iSCSI.
Minimal reproducing XML:
<domain type='qemu'>
<name>MyGuest</name>
<uuid>4dea22b3-1d52-d8f3-2516-782e98ab3fa0</uuid>
<os>
<type arch='x86_64'>hvm</type>
</os>
<memory>4096</memory>
<devices>
<disk type='network'>
<source name='dummy' protocol='iscsi'/>
<target dev='vda'/>
</disk>
</devices>
</domain>
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 7c8e606b64 attempted to fix
the specification of the ramfb property for vfio-pci devices, but it
failed when ramfb is explicitly set to 'off'. This is because only the
'vfio-pci-nohotplug' device supports the 'ramfb' property. Since we use
the base 'vfio-pci' device unless ramfb is enabled, attempting to set
the 'ramfb' parameter to 'off' this will result in an error like the
following:
error: internal error: QEMU unexpectedly closed the monitor
(vm='rhel'): 2024-06-06T04:43:22.896795Z qemu-kvm: -device
{"driver":"vfio-pci","host":"0000:b1:00.4","id":"hostdev0","display":"on
","ramfb":false,"bus":"pci.7","addr":"0x0"}: Property 'vfio-pci.ramfb'
not found.
This also more closely matches what is done for mdev devices.
Resolves: https://issues.redhat.com/browse/RHEL-28808
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds some previously missing test cases that test for
proper firewall rule creation when the following are included in the
network definition:
* <forward dev='blah'>
* no forward element (an "isolated" network)
* nat port range when only ipv4 is nat-ed
* nat port range when both ipv4 & ipv6 are nated
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
When the chain names and table name used by the nftables firewall
backend were changed in commit
958aa7f274, I forgot to change the test
data file base.nftables, which has the extra "list" and "add
chain/table" commands that are generated for the first test case of
networkxml2firewalltest.c. When the full set of tests is run, the
first test will be an iptables test case, so those extra commands
won't be added to any of the nftables cases, and so the data in
base.nftables never matches, and the tests are all successful.
However, if the test are limited with, e.g. VIR_TEST_RANGE=2 (test #2
will be the nftables version of the 1st test case), then the commands
to add nftables table/chains *will* be generated in the test output,
and so the test will fail. Because I was only running the entire test
series after the initial commits of nftables tests, I didn't notice
this. Until now.
base.nftables has now been updated to reflect the current names for
chains/table, and running individual test cases is once again
successful.
Fixes: 958aa7f274
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
The firmware descriptors have 'amd-sev-snp` feature which
describes whether firmware is suitable for SEV-SNP guests.
Provide necessary implementation to detect the feature and pick
the right firmware if guest is SEV-SNP enabled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Pretty straightforward as qemu has 'sev-snp-guest' object which
attributes maps pretty much 1:1 to our XML model. Except for
@vcek where QEMU has 'vcek-disabled`, an inverted boolean, while
we model it as virTristateBool. But that's easy to map too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
SEV-SNP is an enhancement of SEV/SEV-ES and thus it shares some
fields with it. Nevertheless, on XML level, it's yet another type
of <launchSecurity/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks sev-snp-guest object availability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In QEMU commit v9.0.0-1155-g59d3740cb4 the return type of
'query-sev' monitor command changed to accommodate SEV-SNP. Even
though we currently support launching plain SNP guests, this will
soon change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 23c4794488 added parsing of serial ports connected to vspc, but
the VM can also have a network serial port with an empty filename or no
filename at all. Parse these the same way, as a <serial type='null'>.
Resolves: https://issues.redhat.com/browse/RHEL-32182
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v9.0.0-1388-g80e8f06021 plus a patch from upstream fixing a
crash when probing, which has no impact on the data.
Notable changes:
- 'MEM_UNPLUG_ERROR' event removed
- 'discard-source' argument for 'blockdev-backup' added
- 'sev-snp-guest' QOM object added
- 'query-sev' now returns variants of the return object based on sev
type
- removed deprecated 'vcpu' field from trace-event infrastructure
- 'scsi' option of 'virtio-blk-pci' removed
(a variant of 'virtio-lun' qemuxmlconftest case was pinned to the
previous version to continue testing the positive use case)
- new cpu features:
'fred', 'succor', 'vmx-nested-exception', 'lkgs', 'overflow-recov',
'wrmsrns'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Everywhere we use TPM 2.0 as our default, the chances of TPM
1.2 being supported by the guest OS are very slim. Just reject
such configurations outright.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
TPM 1.2 is a pretty bad default these days, especially for
architectures which were introduced when TPM 2.0 already existed.
We're already carving out exceptions for several scenarios, but
that's basically backwards: at this point, using TPM 1.2 is the
exception.
Restructure the code so that it reflects reality and we don't
have to remember to update it every time a new architecture is
introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The default-models tests provide coverage for these scenarios
now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have a non-trivial amount of architecture-specific logic
dealing with TPM, so it's good to have coverage for it.
Note that two architectures currently don't have support for
TPM devices enabled by default in QEMU: loongarch64 and s390x.
The situation might change for the former, but that's unlikely
to happen for the latter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuMonitorTestAddErrorResponse() function is a printf-like
function. But the annotation was mistakenly done in .c file
instead of corresponding .h file rendering the annotation
ineffective. Move the annotation to the header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While __attribute((sentinel)) (exposed by glib under
G_GNUC_NULL_TERMINATED macro) is a gcc extension, it's supported
by clang too. It's already being used throughout our code but
some functions that take variadic arguments and expect NULL at
the end were lacking such annotation. Fill them in.
After this, there are still some functions left untouched because
they expect a different sentinel than NULL. Unfortunately, glib
does not provide macro for different sentinels. We may come up
with our own, but let's save that for future work.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data based on qemu commit v9.0.0-995-g60b54b67c6 on x86_64
Comparison to previous release:
Feature additions:
- 9.1 machine type added
- 'SierraForest' cpu type added
- 'SapphireRapids-v3-x86_64-cpu' added
- 'VFIO_MIGRATION' event added (and corresponding 'migration-events'
bool for the device
- 'exit-on-error' argument for 'migrate-incoming' added
- 'sev-guest' gained 'legacy-vm-type' boolean
- cpu topology added 'module' fields
- 'compat-props' argument 'query-machines' added
- 'deprecated-props' argument for 'query-cpu-model-expansion' added
Deprecated removals:
- legacy non-shared-storage migration fully removed (config/stats)
- legacy migration compression fully removed
- RDMA support removed
- dropped 'nios2' field type from 'query-cpus-fast' return data
Note that this dump was done on a newer kernel version which resulted in
the 'pcommit' feature being removed from the few test cases which depend
on the real CPU flag dump.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
iifname/oifname need to lookup the string that contains the name of
the interface each time a packet is checked, while iif/oif compare the
ifindex of the interface, which is included directly in the
packet. Conveniently, the rule is created using the *name* of the
interface (which gets converted to ifindex as the rule is added), so
no extra work is required other than changing the commandline option.
If it was the case that the interface could be deleted and re-added
during the life of the rule, we would have to use Xifname (since
deleting and re-adding the interface would result in ifindex
changing), but for our uses this never happens, so Xif works for us,
and undoubtedly improves performance by at least 0.0000001%.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use contemporary style for declarations and automatic memory clearing
for a helper string.
Since the function can't fail any more, remove any mention of returning
errno and remove error checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The iptables backend (which was used as the model for the nftables
backend) used the same "filter" and "nat" tables used by other
services on the system (e.g. firewalld or any other host firewall
management application), so it was possible that one of those other
services would be blocking DNS, DHCP, or TFTP from guests to the host;
we added our own rules at the beginning of the chain to allow this
traffic no matter if someone else rejected it later.
But with nftables, each service uses their own table, and all traffic
must be acepted by all tables no matter what - it's not possible for
us to just insert a higher priority/earlier rule that will override
some reject rule put in by, e.g., firewalld. Instead the firewalld (or
other) table must be setup by that service to allow the traffic. That,
along with the fact that our table is already "accept by default",
makes it possible to eliminate the individual accept rules for DHCP,
DNS, and TFTP. And once those rules are eliminated, there is no longer
any need for the guest_to_host or host_to_guest tables.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Because the chains added by the network driver nftables backend will
go into a table used only by libvirt, we don't need to have "libvirt"
in the chain names. Instead, we can make them more descriptive and
less abrasive (by using lower case, and using full words rather than
abbreviations).
Also (again because nobody else is using the private "libvirt_network"
table) we can directly put our rules into the input ("guest_to_host"),
output ("host_to_guest"), and postrouting ("guest_nat") chains rather
than creating a subordinate chain as done in the iptables backend.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This way when we implement nftables for the nwfilter driver, we can
create a separate table called "libvirt_nwfilter" and everything will
look all symmetrical and stuff.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Run all the networkxml2firewall tests twice - once with iptables
backend, and once with the nftables backend.
The results files for the existing iptables tests were previously
named *.args. That has been changed to *.iptables, and the results
files for the new nftables tests are named *.nftables.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When destroying a network, the network driver has always assumed that
it knew what firewall rules had been added as the network was
started. This was usually correct - I only recall one time in the past
that the firewall rules added by libvirt were changed. But if the
exact rules used for a network *were* ever changed from one
build/version of libvirt to another, then we would end up attempting
to remove rules that hadn't been added, and could possibly *not*
remove rules that had been added.
The solution to this to not make such brash assumptions about the
past, but instead to save (in the network status object at network
start time) a list of all the rules needed to remove the rules that
were added for the network, and then use that saved list during
network destroy to remove exactly what was previous added.
Beyond making net-destroy more precise, there are other benefits:
1) We can change the details of the rules we add for networks from one
build/release of libvirt to another and painlessly upgrade.
2) The user can switch from one firewall backend to another by simply
changing the setting in network.conf and restarting
libvirtd/virtnetworkd.
In both cases, the restarted libvirtd/virtnetworkd will remove all the
rules that had been previously added (based on the network status),
and then add new rules (saving the new removal commands back into the
network status)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It still can have only one useful value ("iptables"), but once a 2nd
value is supported, it will be selectable by setting
"firewall_backend=nftables" in /etc/libvirt/network.conf.
If firewall_backend isn't set in network.conf, then libvirt will check
to see if FIREWALL_BACKEND_DEFAULT_1 is available and, if so, set
that. (Since FIREWALL_BACKEND_DEFAULT_1 is currently "iptables", this
means checking to see it the iptables binary is present on the
system). If the default backend isn't available, that is considered a
fatal error (since no networks can be started anyway), so an error is
logged and startup of the network driver fails.
NB: network.conf is itself created from network.conf.in at build time,
and the advertised default setting of firewall_backend (in a commented
out line) is set from the meson_options.txt setting
"firewall_backend_default_1". This way the conf file will have correct
information no matter what ordering is chosen for default backend at
build time (as more backends are added, settings will be added for
"firewall_backend_default_n", and those will be settable in
meson_options.txt and on the meson commandline to change the ordering
of the auto-detection when no backend is set in network.conf).
virNetworkLoadDriverConfig() may look more complicated than necessary,
but as additional backends are added, it will be easier to add checks
for those backends (and to re-order the checks based on builders'
preferences).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(This paragraph is for historical reference only, described only to
avoid confusion of past use of the name with its new use) In a past
life, virFirewallBackend had been a private static in virfirewall.c
that was set at daemon init time, and used to globally (i.e. for all
drivers in the daemon) determine whether to directly execute iptables
commands, or to run them indirectly via the firewalld passthrough
API. This was removed in commit d566cc55, since we decided that using
the firewalld passthrough API is never appropriate.
Now the same enum, virFirewallBackend, is being reintroduced, with a
different meaning and usage pattern. It will be used to pick between
using nftables commands or iptables commands (in either case directly
handled by libvirt, *not* via firewalld). Additionally, rather than
being a static known only within virfirewall.c and applying to all
firewall commands for all drivers, each virFirewall object will have
its own backend setting, which will be set during virFirewallNew() by
the driver who wants to add a firewall rule.
This will allow the nwfilter and network drivers to each have their
own backend setting, even when they coexist in a single unified
daemon. At least as important as that, it will also allow an instance
of the network driver to remove iptables rules that had been added by
a previous instance, and then add nftables rules for the new instance
(in the case that an admin, or possibly an update, switches the driver
backend from iptables to nftable)
Initially, the enum will only have one usable value -
VIR_FIREWALL_BACKEND_IPTABLES, and that will be hardcoded into all
calls to virFirewallNew(). The other enum value (along with a method
of setting it for each driver) will be added later, when it can be
used (when the nftables backend is in the code).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These objects aren't rules, they are commands that are executed that
may create a firewall rule, delete a firewall rule, or simply list the
existing firewall rules. It's confusing for the objects to be called
"Rule" (especially in the case of the function
virFirewallRemoveRule(), which doesn't remove a rule from the
firewall, it takes one of the objects out of the list of commands to
execute! In order to remove a rule from the host's firewall, you have
to Add a "rule" (now "cmd" aka command) to the list that will, when
applied/run, remove a rule from the host firewall.)
Changing the name to virFirewallCmd makes it all much less confusing.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There was no test for this and we mistakenly used 'B' rather than 'T'
when constructing the json value for this parameter. Thus, a value of
'off' was VIR_TRISTATE_SWITCH_OFF=2, which was translated to a boolean
value of 'true'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I've noticed some tests fail to run under valgrind with the
following error:
$ valgrind --leak-check=full --trace-children=yes ./qemuxmlconftest
valgrind: symbol lookup error: libvirt.git/_build/tests/libdomaincapsmock.so: undefined symbol: virQEMUCapsGet
But without valgrind the test passes just fine. While we usually
don't want to change our code just to adhere to random tools, in
this case we ought to make an exception because valgrind helps us
to detect memory leaks.
NB, the --trace-children=yes is needed whenever a test
re-executes itself, i.e. when it uses mocks. Otherwise we'd just
get (boring) result for the first invocation of main() which does
nothing more than sets up the environment and calls exec().
When running the test binary without valgrind I can see the
libtest_qemu_driver.so being loaded even after exec:
$ LD_DEBUG=libs ./qemuxmlconftest 2>&1 | grep -e libtest_qemu_driver.so -e virQEMUCapsGet
6439: find library=libtest_qemu_driver.so [0]; searching
6439: trying file=libvirt.git/_build/tests/../src/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v3/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v2/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6439: find library=libtest_qemu_driver.so [0]; searching
6439: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling fini: libvirt.git/_build/tests/libtest_qemu_driver.so [0]
But running the same under valgrind:
$ LD_DEBUG=libs valgrind --leak-check=full --trace-children=yes ./qemuxmlconftest 2>&1 | grep -e libtest_qemu_driver.so -e virQEMUCapsGet
6515: find library=libtest_qemu_driver.so [0]; searching
6515: trying file=libvirt.git/_build/tests/../src/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v3/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v2/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6515: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6515: libvirt.git/_build/tests/libdomaincapsmock.so: error: symbol lookup error: undefined symbol: virQEMUCapsGet (fatal)
valgrind: symbol lookup error: libvirt.git/_build/tests/libdomaincapsmock.so: undefined symbol: virQEMUCapsGet
To me, it looks like valgrind forced linker to lookup symbols
"sooner", as individual libraries are loaded. But I must admit I
have no idea how valgrind does that (or if that's even valgrind's
'fault').
But fix is pretty simple: link mocks that rely on symbols from
the QEMU driver with the QEMU driver, well, its test suite
suitable version (libtest_qemu_driver.so).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add a missing option for the test to prove that we parse/format this
option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allocated in testQemuInfoSetArgs(), the vdpafds member of
testQemuArgs is never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It can be safely removed from the VMX, VMWare will still boot the
machine and once another ethernet is added it is updated in the VMX to
zero. So do not require it and default to zero too since this part of
the XML is done as best effort and it is mentioned even in our
documentation.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The mdev code requires YAJL in order to convert from node dev XML to
mdev's config format.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libxlmock.c conditionalizes on WITH_YAJL, but this mock is
used from other tests which only conditionalize on WITH_LIBXL.
The libxl code does not have any dependancy on YAJL, so the
bogus condition can be removed from the mock and also from
libxlxml2domconfigtest.c
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The securityselinuxhelper build is conditionalized on the SELinux
security driver feature. It is also needed, however, by viridentitytest
whenever libselinux is present.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'virsh-auth' test is mistakenly conditionalized on the libvirtd
daemon build, however, it just uses the 'test:///default' driver
URI, so does not require a daemon.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virdrivermoduletest will attempt to dlopen() each driver module,
so they must be build before the test can run.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'virsh-auth' test needs to be able to invoke the 'virsh' binary
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Various tests try to open a connection to 'test:///default' and
must be skipped when the test driver is disabled.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
