This fixes
CC qemu/libvirt_driver_qemu_impl_la-qemu_conf.lo
qemu/qemu_conf.c: In function 'qemuRemoveSharedDevice':
qemu/qemu_conf.c:1384:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Some guests lock the tray and QEMU eject command will simply fail to
eject the media. But the guest OS can handle this attempt to eject the
media and can unlock the tray and open it. In this case, we should try
again to actually eject the media.
If the first attempt fails to detect a tray_open we will fail with
error, from monitor. If we receive that event, we know, that the guest
properly reacted to the eject request, unlocked the tray and opened it.
In this case, we need to run the command again to actually eject the
media from the device. The reason to call it again is, that QEMU
doesn't wait for the guest to react and report an error, that the tray
is locked.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1147471
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Modify the eject monitor functions to parse the return code and detect,
whether the error contains "is locked" to report this type of failure to
upper layers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We should distinguish between success and timeout, to let the user
handle those two events differently.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Before:
# virsh blockjob r7 vdc
error: An error occurred, but the cause is unknown
After:
# virsh blockjob r7 vdc
error: Disk 'vdc' not found in the domain
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1241355
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1142631
Commit id 'e0e290552' added a check to determine if the same bus
had the same target value. It seems that's not quite good enough
as the check should check the target name value regardless of bus type.
Also added a DO_TEST_DIFFERENT to exhibit the issue
This patch reverts commit 4749d82a which tried to tweak the logic in
volume creation. We did realloc and update our object list before we executed
volume building within a specific storage backend. If that failed, we
had to update (again) our object list to the original state as it was before the
build and delete the volume from the pool (even though it didn't exist - this
truly depends on the backend).
I misunderstood the base idea to be able to poll the status of the volume
creation using vol-info. After commit 4749d82a this wasn't possible
anymore, although no BZ has been reported yet.
Commit 4749d82a also claimed to fix
https://bugzilla.redhat.com/show_bug.cgi?id=1223177, but commit c8be606b of the
same series as 4749d82ad (which was more of a refactor than a fix)
fixes the same issue so the revert should be pretty straightforward.
Further more, BZ https://bugzilla.redhat.com/show_bug.cgi?id=1241454 can be
fixed with this revert.
Setting of 'val' is a boolean expression, so handle it that way and
adjust the check/return logic to be clearer
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since a future patch will need the device path generated when adding a
shared host device, remove the qemuAddSharedHostdev and inline the two
calls into qemuAddSharedHostdev and qemuRemoveSharedHostdev
Signed-off-by: John Ferlan <jferlan@redhat.com>
Split out the current function in order to share the code with hostdev
in a future patch. Failure to match the expected sgio value against what
is stored will cause an error which the caller would need to handle since
only the caller has the disk (or eventually hostdev) specific data in
order to uniquely identify the disk in an error message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Set the state of virDomainObj in the functions that
actually change the domain state, instead of the generic
libxlDomainCleanup function. This approach gives functions
calling libxlDomainCleanup more flexibility wrt when and
how they change virDomainObj state via virDomainObjSetState.
The prior approach of calling virDomainObjSetState in
libxlDomainCleanup resulted in the following incorrect
coding pattern in the various functions that change
domain state
libxlDomain<DoStateTransition>
call libxl function to do state transition
emit lifecycle event
libxlDomainCleanup
virDomainObjSetState
Once simple manifestation of this bug is seeing a domain
running in virt-manager after selecting the shutdown button,
even after the domain has long shutdown.
In Xen, dom0 is really just another domain that supports ballooning,
adding/removing devices, changing vcpu configuration, etc. This patch
adds support to the libxl driver for managing dom0. Note that the
legacy xend driver has long supported managing dom0.
Operations that are not supported on dom0 are filtered in libvirt
where a sensible error is reported. Errors from libxl are not
always helpful. E.g., attempting a save on dom0 results in
2015-06-23 15:25:05 MDT libxl: debug: libxl_dom.c:1570:libxl__toolstack_save: domain=0 toolstack data size=8
2015-06-23 15:25:05 MDT libxl: debug: libxl.c:979:do_libxl_domain_suspend: ao 0x7f7e68000b70: inprogress: poller=0x7f7e68000930, flags=i
2015-06-23 15:25:05 MDT libxl-save-helper: debug: starting save: Success
2015-06-23 15:25:05 MDT xc: detail: xc_domain_save_suse: starting save of domid 0
2015-06-23 15:25:05 MDT xc: error: Couldn't map live_shinfo (3 = No such process): Internal error
2015-06-23 15:25:05 MDT xc: detail: Save exit of domid 0 with errno=3
2015-06-23 15:25:05 MDT libxl-save-helper: debug: complete r=1: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:1876:libxl__xc_domain_save_done: saving domain: domain did not respond to suspend request: No such process
2015-06-23 15:25:05 MDT libxl: error: libxl_dom.c:2033:remus_teardown_done: Remus: failed to teardown device for guest with domid 0, rc -8
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Add a single boolean function to handle whether the hostdev is shared or not.
Use the new function for the qemu{Add|Remove}SharedHostdev calls as well
as qemuSetUnprivSGIO. NB: This third usage fixes a possible bug where
if this feature is enabled at some time in the future and the shareable flag
wasn't set, the sgio would have been erroneously set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If user passes an invalid address for shared memory device to qemu,
neither libvirt nor qemu will report an error, but qemu will auto assign
a pci address to the shared memory device.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
As the backend of shmem server is a unix type chr device, save it in
virDomainChrSourceDef, so we can reuse the existing code for chr device.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Rename qemuBuildShmemDevCmd to qemuBuildShmemDevStr and change the
return type so that it can be reused in the device hotplug code later.
And split the chardev creation part in a new function
qemuBuildShmemBackendStr for reuse in the device hotplug code later.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
It is better not to assume that newly created network should be
connected to a bridge with same name, but specify it explicitly
by PRL_USE_VNET_NAME_FOR_BRIDGE_NAME flag.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Since QEMU commit ea96bc6 [1]:
i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
the floppy controller is no longer implicit.
Specify it explicitly on the command line if the machine type version
is 2.4 or later.
Note that libvirt's floppy drives do not result in QEMU implying the
controller, because libvirt uses if=none instead of if=floppy.
https://bugzilla.redhat.com/show_bug.cgi?id=1227880
[1] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=ea96bc6
For the implicit controller, we set them via -global.
Separating them will allow reuse for explicit fdc controller as well.
No functional impact apart from one extra allocation.
Explicit 'enum' keyword does not work with portablexdr-rpcgeb, causing its
parser to fail. Fix method is borrowed from virnetprotocol.x
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Commit 2a31c5f0 introduced support for storage pool state XMLs, however
it also introduced a regression:
if (!virstoragePoolObjIsActive(pool)) {
virStoragePoolObjUnlock(pool);
continue;
}
The idea behind this was that since we've got state XMLs and the pool
wasn't marked as active by autostart routine (if the autostart flag had been
set earlier), the pool is inactive and we can leave it be and continue with
other pools. However, filesystem type pools like fs,dir, possibly netfs are
supposed to be active if the filesystem is mounted on the host. And this is
exactly where the regression occurs, e.g. pool type 'dir' which has been
previously destroyed and marked as !autostart gets filtered out
by the condition above.
The resolution should be simply to remove the condition completely,
all pools will get their 'active' flag updated by check callback and if
they do not support such callback, the logic doesn't change and such
pools will be inactive by default (e.g. RBD, even if a state XML exists).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238610
Optimize the virBitmap to array-of-char bitmap conversion by skipping
trailing zero bytes.
This also fixes a regression when requesting iothread information from a
live VM since after commit 825df8c315 the
bitmap returned from virProcessGetAffinity is too big to be formatted
properly via RPC. A user would get the following error:
error: Unable to get domain IOThreads information
error: Unable to encode message payload
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238589
When use setvcpus command with --guest option to a offline vm,
we will get error:
# virsh setvcpus test3 1 --guest
error: Guest agent is not responding: QEMU guest agent is not connected
However guest is not running, agent status could not be connected.
In this case, report domain is not running will be better than agent is
not connected. Move the guest status check more early to output error to
point out guest status is not right.
Also from the logic, a running vm is a basic requirement to use
agent, we cannot use agent if vm is not running.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We support only one IPv4 and one IPv6 default gateway.
If static IPs are not present in instance config,
then we switch on DHCP for this adapter.
PrlVmDevNet_SetAutoApply to makes necessary settings within guest OS
In linux case it creates network startup scripts
/etc/sysconfig/network-scripts/ifcfg-ethN and fills it with necessary
parameters.
There should be at least one domain for each guest
in cababilities. And in current code we don't add
domain for this guest for example.
if ((guest = virCapabilitiesAddGuest(caps, VIR_DOMAIN_OSTYPE_HVM,
VIR_ARCH_X86_64,
"vz",
NULL, 0, NULL)) == NULL)
Anyway, with two virt types it looks a litte messy, so let's
move adding guest and domain to a separate function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Current version of SDK event dispatcing is incorrect. For most VM events (add,
delete etc) issuer type is PIE_DISPATCHER. Actually analyzing issuer type
doesn't have any benifints so this patch get rid of it. All dispatching is done
only on event type.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Avoid a false positive since Coverity find a path in virResizeN which
could return 0 prior to the allocation of memory and thus flags a
possible NULL dereference. Instead allocate the output buffer based
on 'nparams' and only fill it partially if need be - shouldn't be too
much a waste of space. Quicker than multiple VIR_RESIZE_N calls or
two loops of STREQ's sandwiched around a single VIR_ALLOC_N using
'n' matches from a first loop to generate the 'n' addresses to return
Signed-off-by: John Ferlan <jferlan@redhat.com>
QEMU working in vhost-user mode communicates with the other end (i.e.
some virtual router application) via unix domain sockets. This requires
that permissions for the socket files are correctly written into
/etc/apparmor.d/libvirt/libvirt-UUID.files.
Signed-off-by: Michal Dubiel <md@semihalf.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inheritance among CPU model is cool but it makes reviewing CPU model
definitions and comparing them to CPU models from QEMU rather hard and
unpleasant. Let's define all CPU models from scratch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit id 'cd490086' added a VIR_FORCE_CLOSE of the 'sock', but it
was after the VIR_FREE() of phyp_driver, resulting in a possible/likely
NULL dereference.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Convert virPCIDriverDir to return the buffer allocated (or not) and make the
appropriate check in the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Convert virPCIDriverFile to return the buffer allocated (or not) and make the
appropriate check in the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Convert virPCIFile to return the buffer allocated (or not) and make the
appropriate check in the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
So, recently I was testing the LXC driver. You know, startup some
domains. But to my surprise, I was not able to start a single one:
virsh # start --console test
error: Reconnected to the hypervisor
error: Failed to start domain test
error: internal error: guest failed to start: unexpected exit status 125
So I've start digging. It turns out, that in virExec(), when I printed
out the @cmd, I got strange values: *(cmd->outfdptr) was certainly not
valid FD number: it has random value of several millions. This
obviously made prepareStdFd(childout, STDOUT_FILENO) fail (line 611).
But outfdptr is set in virCommandSetOutputFD(). The only place within
LXC driver where the function is called is in
virLXCProcessBuildControllerCmd(). If you take a closer look at the
function it looks like this:
static virCommandPtr
virLXCProcessBuildControllerCmd(virLXCDriverPtr driver,
..
int logfd,
const char *pidfile)
{
...
virCommandSetOutputFD(cmd, &logfd);
virCommandSetErrorFD(cmd, &logfd);
...
}
Yes, you guessed it. @logfd is passed into the function by value.
However, in the function we try to get its address (an address of a
local variable) which is no longer valid once function is finished and
stack is cleaned. Therefore when cmd->outfdptr is evaluated at any
point after this function, we may get a random number, depending on
what's currently on the stack. Of course, this may work sometimes too
- it depends on the compiler how it arranges the code, when the stack
is wiped out.
In order to fix this, lets pass a pointer to @logfd instead of
figuring out (wrong) its value in a function.
The bug was introduced in e1de5521.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Using a custom device tree image may cause unexpected behavior in
architectures that use this approach to detect platform devices. Since
usually the device tree is generated by qemu and thus it's not normally
used let's taint VMs using it to make it obvious as a possible source of
problems.
Since the balloon driver does not guarantee that it returns memory to
the host, using the value in the audit message is not a good idea.
This patch removes auditing from updating the balloon size and reports
the total physical size at startup.
The code which generates paths for UNIX socket blindly used target name
without checking if it was set. Thus for the following device XML
<channel type='unix'>
<source mode='bind'/>
<target type='virtio'/>
</channel>
we would generate "/var/lib/libvirt/qemu/channel/target/NAME.(null)"
path which works but is not really correct. Let's not use the
".target_name" suffix at all if target name is not set.
https://bugzilla.redhat.com/show_bug.cgi?id=1226854
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While CPU0 was made unpluggable in Linux a while ago it's not desirable
to unplug it since some parts of the kernel (suspend-to-ram) still
depend on it.
This patch fixes the vCPU selection code in libvirt so that it will not
be disabled.
The target type comparison in qemuDomainDetachChrDevice
used the VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE enum, so virtio-serial
addresses were not freed properly for channel devices.
Call qemuDomainReleaseDeviceAddress uncoditionally and decide
based on the address type instead of the target/device types.
Also check the device type when deciding what type the address should
be. Commit 9807c47 (aiming to fix another error in address allocation)
only checked the target type, but its value is different for different
device types. This resulted in an error when trying to attach
a channel with target type 'virtio':
error: Failed to attach device from channel-file.xml
error: internal error: virtio serial device has invalid address type
Make the logic for releasing the address dependent only on
* the address type
* whether it was allocated earlier
to avoid copying the device and target type checks.
https://bugzilla.redhat.com/show_bug.cgi?id=1230039
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
def->vcpus was never updated after successfully changing the live
vcpu count of a domain. Subsequent queries for vcpu info would
return incorrect results. E.g.:
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 4
virsh setvcpus test 2
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 4
After patch, live current config is reported correctly:
virsh vcpucount test
maximum config 4
maximum live 4
current config 4
current live 2
While fixing this, noticed that the live config was not saved
to cfg->stateDir via virDomainSaveStatus. Save the live config
and change error handling of virDomainSave{Config,Status} to
log a message via VIR_WARN, instead of failing the entire
DomainSetVcpusFlags operation.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl driver always uses virDomainObj->def when formatting
the domain XML description. Use virDomainObj->newDef when
--inactive flag is set.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
libxlDomainCreateXML() would remove a persistent domain if
libxlDomainStart() failed. Check if domain is persistent
before removing.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When restarting libvirtd and reconnecting to running domains,
libxlReconnectDomain() would unconditionally set the domain state
to VIR_DOMAIN_RUNNING, overwriting the state maintained in
$statedir/<domname>.xml. A domain in a paused state would have
the state changed to running, even though it was actually in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1201760
When the domain "<on_crash>coredump-destroy</on_crash>" is set, the
domain wasn't being destroyed, rather it was being rebooted.
Add VIR_DOMAIN_LIFECYCLE_CRASH_COREDUMP_DESTROY to the list of
on_crash types that cause "-no-reboot" to be added to the qemu
command line.
Although defined the same way, fortunately there hadn't been any deviation.
Ensure any assignments to onCrash use VIR_DOMAIN_LIFECYCLE_CRASH_* defs and
not VIR_DOMAIN_LIFECYCLE_* defs
https://bugzilla.redhat.com/show_bug.cgi?id=1232606
Since an mpath pool contains all the Multipath devices on a host, allowing
more than one defined on a host at a time should be disallowed under the
policy of disallowing duplicate source pools for the host.
Adjust to docs to clarify the Multipath target path value usage for both
the storage driver (only 1 pool per host) and formatstorage references
(ignore the target element in favor of the default target mapping of
/dev/mapper).
https://bugzilla.redhat.com/show_bug.cgi?id=1230664
Per the devmapper docs, use "/dev/mapper" or "/dev/dm-n" in order to
determine if a device is under control of DM Multipath.
So add "/dev/mapper" to the virFileExists, leaving the "/dev/mpath"
as a "legacy" option since it appears for a while it was the preferred
mechanism, but is no longer maintained
https://bugzilla.redhat.com/show_bug.cgi?id=1201143
The formatdomain.html description for <disk> device 'lun' indicates that
it must be either a type 'block' or type 'network' with protocol 'iscsi';
however, we did not make that check until domain startup.
This caused issues for virt-manager which had an unexpected failure at
run time rather config time.
This patch adds a check in post part disk device checking for the specific
and supported lun types as well as adjusting the test failure to be for
parse config rather than run time.
Libvirt periodically refreshes all volumes in a storage pool, including
the volumes being cloned.
While cloning a storage volume from parent, we drop pool locks. Subsequent
volume refresh sometimes changes allocation for an ongoing copy, and leads
to corrupt images.
Fix: Introduce a shadow volume that isolates the volume object under refresh
from the base which has a copy ongoing.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Spice events have mostly similar information present in the event JSON
but they differ in the name of the element containing the port.
The JSON event also provides connection ID which might be useful in the
future.
This patch splits up the event parser code into two functions and the
SPICE reimplements the event parsing with correct names and drops the
VNC only stuff.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1236585
https://bugzilla.redhat.com/show_bug.cgi?id=1227664
If the requested format type for the new entry in the file system pool
is a 'dir', then be sure to set the vol->type correctly as would be done
when the pool is refreshed.
Make sure we only assign the default spicevmc channel name to spicevmc
virtio channels. Caused by commits 3269ee65 and 1133ee2b, which moved
the assignment from XML parsing code to QEMU but failed to keep the
logic.
https://bugzilla.redhat.com/show_bug.cgi?id=1179680
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Certain PCI buses don't support hotplug, and when automatically
assigning PCI addresses for devices, libvirt is very conservative in
its assumptions about whether or not a device will need to be
hotplugged/unplugged in the future. But if the user manually assigns
an address, they likely are aware of any hotplug requirements of the
device (or at least they should be).
In short, after this patch, automatically PCI address assignment will
assume that the device must be plugged in to a hot-pluggable slot, but
manually assignment can place the device in any bus that is
compatible, regardless of whether or not it supports hotplug. If the
user makes a mistake and plugs the device into a bus that doesn't
support hotplug, then later tries to do a hot-unplug, qemu will give
an appropriate error.
(in the future we may want to add a "hotpluggable" attribute to all
devices, with default being "yes" for autoassign, and "no" for manual
assign).
When support for the pcie-root and dmi-to-pci-bridge buses on a Q35
machinetype was added, I was concerned that even though qemu at the
time allowed plugging a PCI device into a PCIe port, that it might not
be supported in the future. To prevent painful backtracking in the
possible future where this happened, I disallowed such connections
except in a few specific cases requested by qemu developers (indicated
in the code with the flag VIR_PCI_CONNECT_TYPE_EITHER_IF_CONFIG).
Now that a couple years have passed, there is a clear message from
qemu that there is no danger in allowing PCI devices to be plugged
into PCIe ports. This patch eliminates
VIR_PCI_CONNECT_TYPE_EITHER_IF_CONFIG and changes the code to always
allow PCI->PCIe or PCIe->PCI connection *when the PCI address is
specified in the config. (For newly added devices that haven't yet
been given a PCI address, the auto-placement still prefers using the
correct type of bus).
The PCI case of the switch statement in this function contains another
switch statement with a case for each model. Currently every model
except pci-root and pcie-root has a check for index > 0 (since only
those two can have index==0), and the function should never be called
for those two anyway. If we move the check for !pci[e]-root to the top
of the pci case, then we can move the check for index > 0 out of the
individual model cases. This will save repeating that check for the
three new controller models about to be added.
Instead of using qemuMonitorJSONDevGetBlockExtent (which I plan to
remove later) extract the data in place.
Additionally add a flag that will be set when the wr_highest_offset was
extracted correctly so that callers can act according to that.
The test case addition should help make sure that everything works.
Function prlsdkGetStatsParam was missing a prototype or the static
keyword. I went with static since it built successfully.
Pushed as a build breaker fix.
Implemented counters:
VIR_DOMAIN_MEMORY_STAT_SWAP_IN
VIR_DOMAIN_MEMORY_STAT_SWAP_OUT
VIR_DOMAIN_MEMORY_STAT_MINOR_FAULT
VIR_DOMAIN_MEMORY_STAT_MAJOR_FAULT
VIR_DOMAIN_MEMORY_STAT_AVAILABLE
VIR_DOMAIN_MEMORY_STAT_ACTUAL_BALLOON
VIR_DOMAIN_MEMORY_STAT_UNUSED
Comments.
1. Use vzDomObjFromDomainRef/virDomainObjEndAPI pair to get domain
object as we use prlsdkGetStatsParam. See previous statistics
comments.
2. Balloon statistics is not applicable to containers. Fault
statistics for containers not provided in PCS6 yet.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Comments.
Replace vzDomObjFromDomain/virObjectUnlock pair
to vzDomObjFromDomainRef/virDomainObjEndAPI as we
use prlsdkGetStatsParam. See previous statistics
comments.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Make net device lookup by mac return sdk handle
instead of quite ephemeral enumeration index. After
this change there is no need anymore in special
function of removing device by enumeration index.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Populate counters SDK currenly supports:
rx_bytes
rx_packets
tx_bytes
tx_packets
Comments.
Use vzDomObjFromDomainRef/virDomainObjEndAPI pair to get domain
object as we use prlsdkGetStatsParam that can release domain
object lock and thus we need a reference in case domain
is deleated meanwhile.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
So far the argument has not much meaning and was practically ignored.
This is not good since when doing memory hotplug, the size of desired
hugepage backing is passed in that argument. Taking closer look at the
tests I'm fixing reveals the bug. For instance, while the following is
in the test:
<memory model='dimm'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>4096</pagesize>
</source>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
<address type='dimm' slot='0' base='0x100000000'/>
</memory>
the generated commandline corresponding to this XML was:
-object memory-backend-ram,id=memdimm0,size=536870912,\
host-nodes=1-3,policy=bind
Have you noticed? Yes, memory-backend-ram! Nothing can be further away
from the right answer. The hugepage backing is requested in the XML
and we happily ignore it. This is just not right. It's
memory-backend-file which should have been used:
-object memory-backend-file,id=memdimm0,prealloc=yes,\
mem-path=/dev/hugepages4M/libvirt/qemu,size=536870912,\
host-nodes=1-3,policy=bind
The problem is, that @pagesize passed to qemuBuildMemoryBackendStr
(where this part of commandline is built) was ignored. The hugepage to
back memory was searched only and only by NUMA nodes pinning. This
works only for regular guest NUMA nodes.
Then, I'm changing the hugepages size in the test XMLs too. This is
simply because in the test suite we create dummy mount points just for
2M and 1G hugepages. And in the test 4M was requested. I'm sticking to
2M, but 1G should just work too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1196644
This function constructs the backend (host facing) part of the
memory device. At the beginning, the configured hugepages are
searched to find the best match for given guest NUMA node.
Configured hugepages can have a @nodeset attribute to specify on
which guest NUMA nodes should be the hugepages backing used.
There is, however, one 'corner case'. Users may just tell 'use
hugepages to back all the nodes'. In other words:
<memoryBacking>
<hugepages/>
</memoryBacking>
<cpu>
<numa>
<cell id='0' cpus='0-1' memory='1024000' unit='KiB'/>
</numa>
</cpu>
Our code fails in this case. Well, since there's no @nodeset (nor
any <page/> child element to <hugepages/>) we fail to lookup the
default hugepage size to use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1235116
According to our XML definition, zero is as valid as any other value.
Mainly because it should be kernel-agnostic.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Drop internal data structures and use the proper fields in virDomainDef.
This allows to greatly simplify the code and allows to remove the
private data structure that was holding just redundant data.
This patch also fixes the bogous output where we'd report that a fresh
VM without vCPU pinning would not run on all vcpus.
Only self-locking APIs are used and the pointer is immutable so there's
no need to lock the driver to access the domain list.
This patch removes locking partially for everything that will not be
converted to testDomObjFromDomain in the next patch.
Make testObjectEventQueue tolerant to NULL @event and move it so that it
does not require a prototype. Additionally we are now able to remove
locking when accessing driver->eventState, since it's using self-locking
APIs and the pointer is immutable.
When migration fails in qemuMigrationPrepareAny, we unconditionally call
qemuDomainRemoveInactive, which should only be called for transient
domains. The check for !vm->persistent was accidentally removed by
commit 540c339.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the e6d180f07f commit the parallels driver was renamed to vz.
However, there was a commit merged later, which was sent to the list
before the rename. The other commit is 6de12b026b. Fix all the
missing renames.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We already enable the parser option to detect invalid UTF-8, but
didn't test it. Also, JSON states that behavior of an object
with a duplicated key is undefined; we chose to reject it, but
were not testing it.
With the enhanced tests in place, we can simplify yajl2
initialization by relying on parser defaults being sane.
* src/util/virjson.c (virJSONValueFromString): Simplify.
* tests/jsontest.c (mymain): Test more bad usage.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since older yajl ignores trailing garbage, a client can cause
problems by intentionally ending the wrapper array early. Since
we already track nesting, it's not too much harder to reject
invalid nesting pops.
* src/util/virjson. (_virJSONParser): Add field.
(virJSONValueFromString): Set witness.
(virJSONParserHandleEndArray): Use it to catch abuse.
* tests/jsontest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Yajl 2 has a nice feature that it can be configured whether to
allow multiple JSON objects parsed from a single stream, defaulting
to off. And yajl 1.0.12 at least provided a way to tell if all
input bytes were parsed, or if trailing bytes remained after a
valid JSON object was parsed. But we target RHEL 6 yajl 1.0.7,
which has neither of these. So fake it by always parsing '[...]'
instead, so that trailing garbage either trips up the array parse,
or is easily detected when unwrapping the result.
* src/util/virjson.c (virJSONValueFromString): With older json,
wrap text to avoid trailing garbage.
* tests/jsontest.c (mymain): Add tests for this.
Signed-off-by: Eric Blake <eblake@redhat.com>
We have been allowing javascript style comments in JSON ever
since commit 9428f2c (v0.7.5), but qemu doesn't send them, and
they are not strict JSON. Reject them for now; if we can later
prove that it is worthwhile, we can reinstate it at that point
(or even make it conditional, by adding a bool parameter to
the libvirt entry point).
* src/util/virjson.c (virJSONValueFromString): Don't enable
comment parsing.
* tests/jsontest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit ceb496e5 fails on RHEL 6, with yajl 1.0.7, because that
version of yajl returns yajl_status_insufficient_data when the
parser is waiting for the rest of a token (this enum value was
dropped in yajl 2, so we have to wrap it). It also exposes a
problem where older yajl silently ignores trailing garbage after
a successful parse, so this patch works around that by changing
the testsuite. Another more invasive patch can add tighter
semantics to json parsing, but this is sufficient for a minimal
clean backport.
While touching this, fix up our error message cleanup. Yajl
documents that error messages produced by yajl_get_error()
MUST be cleaned with yajl_free_error(); this is certainly
true if we were to pass non-NULL allocator callbacks during
yajl_alloc(), but probably harmless in our usage of passing
NULL. But better safe than sorry.
* src/util/virjson.c (virJSONValueFromString): Allow different
error code. Use canonical cleanup of error message.
(VIR_YAJL_STATUS_OK): New helper macro.
* tests/jsontest.c (mymain): Wrap text to avoid difference in
trailing garbage handling
Signed-off-by: Eric Blake <eblake@redhat.com>
In this patch we add VIR_DOMAIN_DEVICE_NET handlers implementation
for domainAttachDevice and domainDetachDevice callbacks.
As soon as we don't support this operation for hypervisor type domains,
we implement this functionality for containers only.
In detach procedure we find network device by MAC address.
Because PrlVmDevNet_GetMacAddress() returns MAC as a UTF-8 encoded
null-terminated string, we use memcmp() to compare it.
Also we remove corresponding virtual network by prlsdkDelNetAdapter call.
This patch provides support for the new watchdog model "diag288".
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Related to :
https://bugzilla.redhat.com/show_bug.cgi?id=1171933
Rather than ignore the return status from virStorageBackendSCSIFindLUs,
cause a failure to start the pool if a -1 is returned. Issue was noted
during testing of the bz for iscsi that 'scsi' and 'fc' pools don't fail.
Commit id '1feaccf0' attempted to handle an empty secrettype value; however,
it made a mistake by processing the secretType as if it was the original
secrettype string. The 'secretType' is actually whether 'usage' or 'uuid'
was used.
Thus adjust part of the change to make the same check for def->src->type !=
VIR_STORAGE_TYPE_VOLUME before setting auth_secret_usage from the
secrettype field.
Luckily the aforementioned commits misdeed would be overwritten by the
call to virStorageTranslateDiskSourcePool
Just refactor existing code to use a child buf instead of
check all element before format <blkiotune> and <cputune>.
This will avoid the more and more bigger element check during
we introduce new elements in <blkiotune> and <cputune> in the
future.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Functions like virDomainOpenConsole() and virDomainOpenChannel() accept
NULL as a dev_name parameter. Try using alias for the error message if
dev_name is not specified.
Before:
error: internal error: character device <null> is not using a PTY
After:
error: internal error: character device serial0 is not using a PTY
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit id '832a9256' adjusted the code to recognize when the default
type of "unknown" was provided as the format type and to use "dos" if
found. Since the pool is built with "dos" and it could cause some
confusion when formatting the XML after building by seeing "unknown"
in the output, let's just adjust the pool's setting to "dos" so that
subsequent formats will see the value.
By trying to lead the way of clean includes, I sorted the lines
alphabetically and that is a problem for mingw builds with gnulib.
As 'configmake.h' defines DATADIR and 'datatypes.h' transitively
includes 'winsock.h' that uses 'DATADIR' as a name for a struct,
it's enough to reorder those.
Even though this might be worked around in gnulib later on, this
fixes the build for now.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
