All callers pass 'true'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patches removed the job submission for the handler so now even
the handler itself can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu code will need to check other qemu-private conditions when
reporting success for waiting. Thus we must replace all use of it with a
qemu-specific helper. For now the helper forwards directly to
virDomainObjWait.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainJobObj into hypervisor/ as generalized
virDomainJobObj along with generalized private job callbacks as
virDomainObjPrivateJobCallbacks.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For RDMA migration we update memory locking limit, but never set it back
once migration finishes (on the destination host) or aborts (on the
source host).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainAdjustMaxMemLock combined computing the desired limit with
applying it. This patch separates the code to apply a memory locking
limit to a new qemuDomainSetMaxMemLock helper for better reusability.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setup all fields for use with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Since we now have a full virStorageSource for storing the nvram path we
don't need the extra dance of transferring the data into the 'pflash1'
variable which was an intermediary solution to use -blockdev.
For now we keep it functionally identical to the previous impl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Extract the internals of qemuDomainPrepareStorageSourceBlockdev into
qemuDomainPrepareStorageSourceBlockdevNodename so that we can reuse it
when instantiating the virStorageSource for pflash backing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
So far migration could only be completed while a migration API was
running and waiting for the migration to finish. In case such API could
not be called (the connection that initiated the migration is broken)
the migration would just be aborted or left in a "don't know what to do"
state. But this will change soon and we will be able to successfully
complete such migration once we get the corresponding event from QEMU.
This is specific to post-copy migration when vCPUs are already running
on the destination and we're only waiting for all memory pages to be
transferred. Such post-copy migration (which no-one is actively
watching) is called unattended migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function never returns anything but zero.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Unix socket chardevs with FD passing need to use the direct mode so we
need to convert it to use qemuFDPassDirect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare for the upcoming refactor to use qemuFDPass for all the network
related file descriptors:
- tapfds
- vhostfds
- slirp
- vdpa
This patch adds the private data variables and a utility function to
clear it. Clearing is useful since we don't really need the data once
the VM is running so we save some memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the FDs are closed right after use to prevent leaks, at certain
point we don't need the whole helper any more. Clear them for char
devices after hotplug and on start.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While 'add-fd' qmp command gives the possibility to find an unused fdset
ID when hot-adding fdsets, such usage is extremely inconvenient.
This patch allows us to track the used fdset id so that we can avoid the
need to check results and thus employ simpler code flow when hot-adding
devices which use FD passing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since v1.3.0-90-gafbe1d4c56 the original value of memlock limit
is stored inside virDomainObj struct directly (under
originalMemlock member). This is needless because the value is
used only inside QEMU driver and thus can reside in
qemuDomainObjPrivate struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The iSCSI hostdev code doesn't require the check for the empty drive
and the check for the protocol because those are already guaranteed at
that point.
In qemuDomainSecretStorageSourcePrepare we don't need to check the
network disk type either as it's now guaranteed by the definition
validator.
Thus both callers can simply check whether src->auth is present and the
helper can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acquiring job introduced in commit [1] to fix a race described in the
commit. Actually it does not help because we get domain in create API
before acuiring job. Then [2] fixed the race but [1] was not reverted even
it is does not required by [2] to work properly.
[1] commit b629c64e5e
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Oct 30 14:38:35 2014 +0100
qemu: avoid rare race when undefining domain
[2] commit c7d1c139ca
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Dec 11 11:14:08 2014 +0100
qemu: avoid rare race when undefining domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that we attempt to remove logs only if virtlogd is in use.
Otherwise we do not know the pattern for rotated files.
For example for VM named "foo" we can not use "foo.log*" pattern to
remove rotated logs as we can have VM named "foo.log" with log
"foo.log.log". We can add extra check that filename does not end with
".log" but for VM "foo.log" we can have rotated log "foo.log.log.1". Ok
let's check we don't have "log" in filename part corresponging to * but
what if someone will use logrotate with "%Y.log-%m-%d" 'dateformat'
option. In this case the check will exclude proper rotated files.
Yes, the last example if quite artificial but it shows it is difficult
to find out correctly rotated files when rotated files pattern is not
known. Thus the above decision only to support case with virtlogd when
we know the pattern.
Another reason for not removing log files when logrotate is present is
that due to races some files can escape deletion. For example foo.log.3
will be rotated to foo.log.4 after removing function will read directory
files and thus foo.log.4 will not be deleted.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These enums are essentially the same and always sorted in the
same order in every hypervisor with jobs. They can be generalized
by using the qemu enums as the main ones as they are the most
extensive.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It does not make sense to have both of these, since one of them
is only a wrapper for the other one. I decided to preserve the
more general one, which requires only virDomainObj and rewrote it
a bit, so that it pulls the qemu driver from privateData.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Before creating a NVRAM path, the qemuDomainNVRAMPathGenerate
method checks whether the config is using the old style
firmware approach. This check is redundant in one of the two
callers. By inlining the check into the other caller, it makes
it clearer to understand that the NVRAM path filling is done
conditionally.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rewrite the parts which already pass FDs via fdset or directly to use
the new infrastructure.
Apart from simpler code this also adds the appropriate names to the fds
in the fdsets which will allow us to properly remove the fdsets won
hot-unplug of chardevs, which we didn't do for now and resulted in
leaking the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a VM we must assign unique IDs for fdsets we add via
'-add-fd'. For now it was done by using the index of the filedescriptor
passed to the virCommand. That approach is not very flexible, because
you need to have already passed the 'fd' to virCommand before generating
the fdset path, and also won't nicely work with fdsets containing two or
more fds.
This patch introduces a counter into the private data of a qemu domain
so that we can allocate unique ids without relying on virCommand.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They're used only inside qemu_domain.c. Move it before their usage,
and unexport them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QOM path will be needed by code which is querying the cpu flags via
'qom-get' and thus needs a valid QOM path to the vCPU.
Add it into the private data and transfer from the queried data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This identifies various MIPS Malta machines, be it 32-bit or 64-bit,
little-endian or big-endian.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
And its callers. The parameter is no longer used since virDomainObjSave
was replaced with qemuDomainSaveStatus wrapper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When setting up TLS options from config in qemuDomainPrepareChardevSourceOne
we can also extract the x509 certificate path and default tlsVerify
setting so that 'qemuBuildChardevCommand' doesn't need to access the
config object any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Completely seprate the creation of the commandline string from the setup
of other objects instantiated on the commandline.
'qemuBuildChardevCommand' will aggregate the setup of individual
parameters such as -add-fd and setup of TLS and the -chardev parameter
itself while the code formatting the commandline will be moved into
qemuBuildChardevStr.
'fdset' names are then stored in qemuDomainChrSourcePrivate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have just one case when we wish to wait for incomming connections for
a listening socket and that is for vhost-user network devices.
Passing this via a flag to qemuBuildChrChardevStr is unwieldy. Add a
field to qemuDomainChrSourcePrivate and populate it for our special
case inside of qemuDomainPrepareChardevSourceOne.
Since we wait for incomming connections only on startup of a new VM we
also need to pass in a flag whether qemuDomainPrepareChardevSourceOne
is called on a new start or on hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the qemuDomainDeviceBackendChardevForeach helper to iterate all
eligible structs and convert the setup of the TLS defaults from the
config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The opening of files for FD passing for a chardev backend was
historically done in the function which is formatting the commandline.
This has multiple problems. Firstly the function takes a lot of
parameters which need to be passed through the commandline formatters.
This made the 'qemuBuildChrChardevStr' extremely unappealing to the
extent that we have multiple other custom formatters in places which
didn't really want to use the function.
Additionally the function is also creating files in the host in certain
configurations which is wrong for a commandline formatter to do. This
meant that e.g. not all chardev test cases can be converted to use
DO_TEST_CAPS_LATEST as we attempt to use such code path and attempt to
create files outside of the test directory.
This patch moves the opening of the filedescriptors from
'qemuBuildChrChardevFileStr' into a new helper
'qemuProcessPrepareHostBackendChardevOne' which is called using
'qemuDomainDeviceBackendChardevForeach'.
To preserve test behaviour we also have another instance
'testPrepareHostBackendChardevOne' which is populating mock
filedescriptors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuDomainDeviceBackendChardevForeach(One) which calls the
callback if either given device has a chardev backend or for all chardev
backends of all devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I think it makes more sense for the variable about jobs to be in
the job object. I also renamed it to be consistent with the rest
of the struct.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This reverts my
commit dc2fd51fd7
Check for domain liveness in qemuDomainObjExitMonitor
which fixed the symptoms of the bug later fixed by
commit 81f50cb92d
qemu: Avoid calling qemuProcessStop without a job
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This wrapper for qemuDomainObjExitMonitorInternal was
extended by my commit dc2fd51fd7
to check whether the domain is still alive, because
we were observing crashes if the QEMU process died
while some of our APIs were in the monitor and the thread
processing the EOF event freed the domain definition.
This bug was fixed by:
commit 81f50cb92d
qemu: Avoid calling qemuProcessStop without a job
but we kept checking for the return value since.
Remove the G_GNUC_WARN_UNUSED_RESULT attribute since
all of the calls that could set def->id to -1 are protected
by qemuProcessBeginStopJob and cannot happen while we have a job
in the monitor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The post parse callback is part of the real (non-test) processing flow.
This commit adds it (for disks) to the qemublocktest flow as well.
Specifically, this will be needed for tests that use luks encryption,
so that the default encryption engine (which is added in an upcoming commit)
will be overridden by qemu.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'effectiveBootIndex' is a copy of 'bootIndex' if '<boot order=' was
present and left unassigned if not. This allows hypervisor drivers to
reinterpret <os><boot> without being visible in the XML.
QEMU driver had a internal implementation for disks, which is now
replaced. Additionally this will simplify a refactor of network boot
assignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
