Commit Graph

1415 Commits

Author SHA1 Message Date
Ján Tomko
024e9af3e5 qemu: call post-parse callbacks when parsing command line too
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.

Assume format type is 'auto' when none is specified on
qemu command line.
2013-04-25 12:10:22 +02:00
Li Zhang
dfd0e4f7f2 qemu: Add command line builder and parser for NVRAM.
This patch is to add command line builder and parser
for NVRAM device, and add test cases.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2013-04-25 16:50:45 +08:00
Osier Yang
45d6c67143 Introduce a sub-element <driver> for controller
Like what we did for "disk", "filesystem" and "interface", this
introduces sub-element <driver> for "controller", and put the "queues"
into it.
2013-04-25 12:10:58 +08:00
Osier Yang
18b428980f Change the tag name "num_queues" into "queues"
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
2013-04-24 23:36:07 +08:00
Peter Krempa
20cb7f3a41 qemu: Improve handling of channels when generating SPICE command line
Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.

This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126
2013-04-24 14:37:57 +02:00
Daniel P. Berrange
d407a11eab Dedicated name for sub-driver open/close methods
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:54 +01:00
Daniel P. Berrange
07a6b9aac4 Rename 'DeviceMonitor' to 'NodeDeviceDriver'
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:53 +01:00
Daniel P. Berrange
abe038cfc0 Extend previous check to validate driver struct field names
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-24 10:59:53 +01:00
Jiri Denemark
6d4804858e qemu: Use -machine accel=tcg|kvm when available
This is a better interface to choose accelerator than guessing whether
we should enable or disable kvm to get the right one.
2013-04-23 21:19:35 +02:00
Jiri Denemark
cfe24c1a18 qemu: Move -enable-kvm and friends earlier in the command line 2013-04-23 21:19:35 +02:00
Eric Blake
1bf25ba249 docs: fix usage of 'onto'
http://www.uhv.edu/ac/newsletters/writing/grammartip2009.07.01.htm
(and several other sites) give hints that 'onto' is best used if
you can also add 'up' just before it and still make sense. In many
cases in the code base, we really want the two-word form, or even
a simplification to just 'on' or 'to'.

* docs/hacking.html.in: Use correct 'on to'.
* python/libvirt-override.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* src/util/virpci.c: Likewise.
* daemon/THREADS.txt: Use simpler 'on'.
* docs/formatdomain.html.in: Better usage.
* docs/internals/rpc.html.in: Likewise.
* src/conf/domain_event.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* tests/qemumonitortestutils.c: Likewise.
* HACKING: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-04-19 14:31:16 -06:00
Li Zhang
88c6159ca7 Set legacy USB option with default for ppc64.
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-19 11:30:49 +01:00
Osier Yang
9969ade669 syntax-check: Only allows to include public headers in external tools
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
2013-04-18 11:31:19 +08:00
Osier Yang
09d2547f96 qemu: Allow the disk wwn to have "0x" prefix
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.

qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'

Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
2013-04-17 23:05:56 +08:00
Osier Yang
2beae9c202 cleanup: Only include testutils.h once
No reason to include it in both "if" and "else" branches.
2013-04-17 15:41:04 +08:00
John Ferlan
c3ad5a3670 Resolve valgrind error
Commit id '1acfc171' resulted in the following valgrind failure:

==25317== 136 (24 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 4 of 4
==25317==    at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25317==    by 0x4C6F851: virAlloc (viralloc.c:124)
==25317==    by 0x4C71493: virBitmapNew (virbitmap.c:74)
==25317==    by 0x4C71B79: virBitmapNewData (virbitmap.c:434)
==25317==    by 0x402EF2: test8 (virbitmaptest.c:436)
==25317==    by 0x40499F: virtTestRun (testutils.c:157)
==25317==    by 0x402E8D: mymain (virbitmaptest.c:474)
==25317==    by 0x404FDA: virtTestMain (testutils.c:719)
==25317==    by 0x39D0821A04: (below main) (in /usr/lib64/libc-2.16.so)
2013-04-16 07:13:43 -04:00
Daniel P. Berrange
83336118db Track symlinks for co-mounted cgroup controllers
If a cgroup controller is co-mounted with another, eg

   /sys/fs/cgroup/cpu,cpuacct

Then it is a requirement that there exist symlinks at

   /sys/fs/cgroup/cpu
   /sys/fs/cgroup/cpuacct

pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:32 +01:00
Daniel P. Berrange
767596bdb4 Remove non-functional code for setting up non-root cgroups
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
8d4adf3efa Add XML config for resource partitions
Allow VMs to be placed into resource groups using the
following syntax

  <resource>
    <partition>/virtualmachines/production</partition>
  </resource>

A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
aa8604dd45 Add a new virCgroupNewPartition for setting up resource partitions
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
8d1c141a8d Refactor cgroups internal data structures
Currently the virCgroupPtr struct contains 3 pieces of
information

 - path - path of the cgroup, relative to current process'
   cgroup placement
 - placement - current process' placement in each controller
 - mounts - mount point of each controller

When reading/writing cgroup settings, the path & placement
strings are combined to form the file path. This approach
only works if we assume all cgroups will be relative to
the current process' cgroup placement.

To allow support for managing cgroups at any place in the
heirarchy a change is needed. The 'placement' data should
reflect the absolute path to the cgroup, and the 'path'
value should no longer be used to form the paths to the
cgroup attribute files.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
d14524701a Add a test suite for cgroups functionality
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.

Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
b7f1d218d8 Conditionally compile storagevolxml2argvtest
Only compile storagevolxml2argvtest if WITH_STORAGE is
set, because it links to that driver

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
c78a2b13a6 Conditionalize use of symlink() function in test suite
On Win32 symlink() is not available, so virstoragetest.c
must be conditionalized to avoid compile failures.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:30 +01:00
Stefan Berger
c772feb069 Add test case for TPM passthrough
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
2013-04-12 16:55:46 -04:00
Li Zhang
a6e37aedff Add USB option capability
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2013-04-12 10:56:03 +01:00
Bogdan Purcareata
442d6a0527 Implement support for <hostdev caps=net>
This allows a container-type domain to have exclusive access to one of
the host's NICs.

Wire <hostdev caps=net> with the lxc_controller - when moving the newly
created veth devices into a new namespace, also look for any hostdev
devices that should be moved. Note: once the container domain has been
destroyed, there is no code that moves the interfaces back to the
original namespace. This does happen, though, probably due to default
cleanup on namespace destruction.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
2013-04-08 17:40:08 +01:00
Osier Yang
664270b849 Support seclabels for volume type disk
"seclabels" is only valid for 'file' or 'block' type storage volume.
2013-04-08 18:59:50 +08:00
Osier Yang
43404fee37 Support startupPolicy for 'volume' disk
"startupPolicy" is only valid for file type storage volume, otherwise
it fails on starting the domain.
2013-04-08 18:54:37 +08:00
Osier Yang
4bc331c894 Introduce new XMLs to specify disk source using libvirt storage
With this patch, one can specify the disk source using libvirt
storage like:

  <disk type='volume' device='disk'>
    <driver name='qemu' type='raw' cache='none'/>
    <source pool='default' volume='fc18.img'/>
    <target dev='vdb' bus='virtio'/>
  </disk>

"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.

docs/formatdomain.html.in:
  * Add documents for new XMLs
docs/schemas/domaincommon.rng:
  * Add rng for new XMLs;
src/conf/domain_conf.h:
  * New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
  * Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
  * New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
    type disk source.
  * New helper virDomainDiskSourcePoolDefFree to free the source def
    if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
  * New test
2013-04-08 18:48:14 +08:00
Osier Yang
9f781da69d New XML attributes for storage pool source adapter
This introduces 4 new attributes for storage pool source adapter.
E.g.

<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>

Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.

* docs/formatstorage.html.in:
  - Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
  - Add RNG schema
* src/conf/storage_conf.c:
  - Parse and format the new XMLs
* src/conf/storage_conf.h:
  - New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
  - New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
  - Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
  - Replace "adapter" with "adapter.data.name", which is member of the union
    of the new struct virStoragePoolSourceAdapter now. Later patch will
    add the checking, as "adapter.data.name" is only valid for "scsi_host"
    adapter.
* src/storage/storage_backend_scsi.c:
  - Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
  - New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
  - Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
    specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
  - New test
* tests/storagepoolxml2xmltest.c:
  - Include the test
2013-04-08 18:41:06 +08:00
Daniel P. Berrange
2d77704509 Avoid cast alignment warnings in port allocator test
To avoid

virportallocatortest.c: In function 'bind':
virportallocatortest.c:34:33: warning: cast increases required alignment of target type [-Wcast-align]
     struct sockaddr_in *saddr = (struct sockaddr_in *)addr;
                                 ^

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:21 +01:00
Daniel P. Berrange
15d8511b41 Add a test suite for keycode mapping functions
Validate that translations between different keycode sets
are functioning.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:20 +01:00
Osier Yang
1acfc171da util: Add a helper to check if all bits of a bitmap are clear 2013-04-06 10:14:21 +08:00
Osier Yang
d4bf0a9378 qemu: Support multiple queue virtio-scsi
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
2013-04-06 10:08:47 +08:00
Daniel P. Berrange
b1d3154a50 Ensure LD_PRELOAD exists before running test case
The linker will ignore LD_PRELOAD libraries which do not
exist, just printing a warning message. This is not helpful
for the test suite which will be utterly fubar without the
preload library present. Add an explicit test for existence
of the library to protect against this

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:41:46 +01:00
Peter Krempa
482e5f159c virCaps: get rid of defaultConsoleTargetType callback
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
2013-04-04 22:42:39 +02:00
Peter Krempa
46becc18ba virCaps: get rid of macPrefix field
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
2013-04-04 22:42:38 +02:00
Peter Krempa
8960d65674 virCaps: get rid of hasWideScsiBus
Use the virDomainXMLConf structure to hold this data.
2013-04-04 22:42:38 +02:00
Peter Krempa
b299084988 virCaps: get rid of defaultDiskDriverType
Use the qemu specific callback to fill this data in the qemu driver as
it's the only place where it was used and fix tests as the qemu test
capability object didn't configure the defaults for the tests.
2013-04-04 22:42:38 +02:00
Peter Krempa
b5def001cc virCaps: get rid of emulatorRequired
This patch removes the emulatorRequired field and associated
infrastructure from the virCaps object. Instead the driver specific
callbacks are used as this field isn't enforced by all drivers.

This patch implements the appropriate callbacks in the qemu and lxc
driver and moves to check to that location.
2013-04-04 22:42:38 +02:00
Peter Krempa
9ea249e7d9 virCaps: get rid of defaultDiskDriverName
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
2013-04-04 22:42:38 +02:00
Peter Krempa
a68d672667 qemu: Record the default NIC model in the domain XML
This patch implements the devices post parse callback and uses it to fill
the default qemu network card model into the XML if none is specified.

Libvirt assumes that the network card model for qemu is the "rtl8139".
Record this in the XML using the new callback to avoid user
confusion.
2013-04-04 22:41:20 +02:00
Peter Krempa
ad0d10b2b1 conf callback: Rearrange function parameters
Move the xmlopt and caps arguments to the end of the argument list.
2013-04-04 22:41:19 +02:00
Peter Krempa
43b99fc4c0 conf: Add post XML parse callbacks and prepare for cleaning of virCaps
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.

With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.

Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
  - called for a single device parsed and for every single device in a
    domain config. A virDomainDeviceDefPtr is passed along with the
    domain definition and virCaps.

* virDomainDefPostParseCallback, (domainPostParseCallback)
  - A callback that is meant to process the domain config after it's
  parsed.  A virDomainDefPtr is passed along with virCaps.

Both types of callbacks support arbitrary opaque data passed for the
callback functions.

Errors may be reported in those callbacks resulting in a XML parsing
failure.
2013-04-04 22:29:48 +02:00
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Daniel P. Berrange
347081effa Implement minimal sysinfo for ARM platforms
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:31 +01:00
Daniel P. Berrange
0464ab183d Disable of unused sysinfotest functions
Certain functions in the sysinfotest.c are not used unless
a whitelisted architecture is being built. Disable those
functions unless required to avoid warnings about unused
functions.

sysinfotest.c:93:1: warning: 'sysinfotest_run' defined but not used [-Wunused-function]
 sysinfotest_run(const char *test,

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:00 +01:00
Martin Kletzander
e7cd2844ca Allow multiple parameters for schedinfo
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:

virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0

Invalid scheduler options are reported as well.  These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
2013-04-03 08:49:30 +02:00
Peter Krempa
ab4bf20ead util: Change virMacAddrFormat to lowercase hex characters
The domain XML generator creates the mac addres strings with lowercase
strings with a separate piece of code. This patch changes the formating
helper to do the same stuff to allow using it to normalize a string
provided by the user. After this change some of the tests that are
outputing the mac address will need to be changed.
2013-04-02 15:53:43 +02:00
Li Zhang
f84b92ea19 Optimize machine option to set more options with it
Currently, -machine option is used only when dump-guest-core is set.

To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-04-02 07:02:34 -06:00
Eric Blake
6f7e4ea359 smartcard: spell ccid-card-emulated qemu property correctly
Reported by Anthony Messina in
https://bugzilla.redhat.com/show_bug.cgi?id=904692
Present since introduction of smartcard support in commit f5fd9baa

* src/qemu/qemu_command.c (qemuBuildCommandLine): Match qemu spelling.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.args:
Fix broken test.
2013-04-02 06:23:33 -06:00
Ján Tomko
f03dcc5df1 qemu: Allow migration over IPv6
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.

Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.

Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
2013-04-02 11:23:47 +02:00
Eric Blake
7524cd893e Revert "qemu: detect multi-head qxl via more than version check"
This reverts commit 5ac846e42e.

After further discussions with Alon Levy, I learned the following:

The use of '-vga qxl' vs. '-device qxl-vga' is completely orthogonal
to whether ram_size can be exposed.  Downstream distros are interested
in backporting support for multi-head qxl, but this can be done in
one of two ways:
1. Support one head per PCI device.  If you do this, then it makes
sense to have full control over the PCI address of each device. For
full control, you need '-device qxl-vga' instead of '-vga qxl'.
2. Support multiple heads through a single PCI device.  If you do
this, then you need to allocate more RAM to that PCI device (enough
ram to cover the multiple screens).  Here, the device is hard-coded
to 0:0:2.0, both in qemu and libvirt code.

Apparently, backporting ram_size changes to allow multiple heads in
a single device is much easier than backporting multiple device
support.  Furthermore, the presence or absence of qxl-vga.surfaces
is no different than the presence or absence of qxl-vga.ram_size;
both properties can be applied regardless of whether you have one
PCI device (-vga qxl) or multiple (-device qxl-vga), so this property
is NOT a good witness of whether '-device qxl-vga' support has been
backported.

Downstream RHEL will NOT be using this patch; and worse, leaving this
patch in risks doing the wrong thing if compiling upstream libvirt
on RHEL, so the best course of action is to revert it.  That means
that libvirt will go back to only using '-device qxl-vga' for qemu
>= 1.2, but this is just fine because we know of no distros that plan
on backporting multiple PCI address support to any older version of
qemu.  Meanwhile, downstream can still use ram_size to pack multiple
heads through a single PCI device.
2013-03-25 08:38:35 -06:00
Michal Privoznik
70bc623b58 viralloc: Export virAllocTest*
If users build with --enable-test-oom configure option,
they get this error saying, virAllocTest* functions are
not defined within tests/testutils.c.
2013-03-22 12:45:14 +01:00
Paolo Bonzini
9f7a9aee37 qemu: add support for LSI MegaRAID SAS1078 (aka megasas) SCSI controller
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:11:14 +08:00
Paolo Bonzini
523207fe8c qemu: pass iscsi authorization credentials
A better way to do this would be to use a configuration file like

   [iscsi "target-name"]
   user = name
   password = pwd

and pass it via -readconfig.  This would remove the username and password
from the "ps" output.  For now, however, keep this solution.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
6dca6d84ed domain: parse XML for iscsi authorization credentials
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
c820fbff9f qemu: support passthrough for iscsi disks
This enables usage of commands like persistent reservations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:23 +08:00
Paolo Bonzini
1a308ee015 qemu: add support for libiscsi
libiscsi provides a userspace iSCSI initiator.

The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.

libiscsi uses "iscsi" as the scheme, not "iscsi+tcp".  We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22 12:10:22 +08:00
Paolo Bonzini
1d94891288 domain: add support for iscsi network disks
This plumbs in the XML description of iSCSI shares.  The next patches
will add support for the libiscsi userspace initiator.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-20 17:30:25 -06:00
Olivia Yin
0b3509e245 qemu: add dtb option support
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
  <qemu:commandline>
    <qemu:arg value='-dtb'/>
    <qemu:arg value='/media/ram/test.dtb'/>
  </qemu:commandline>

This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
  <os>
    <type arch='ppc' machine='ppce500v2'>hvm</type>
    <kernel>/media/ram/uImage</kernel>
    <initrd>/media/ram/ramdisk</initrd>
    <dtb>/media/ram/test.dtb</dtb>
    <cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
  </os>

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-19 15:48:58 -06:00
Gene Czarcinski
1cd2078c88 rename tests/conftest.c
To prevent confusion with configure's popular name
for a file, rename conftest.c to test_conf.c which
is consistent with the invoking test_conf.sh
Signed-off-by: Gene Czarcinski <gene@czarc.net>
2013-03-19 13:13:28 -06:00
Daniel P. Berrange
3aabe27247 Define internal APIs for managing identities
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-19 13:37:37 +00:00
Paolo Bonzini
eebbb232e6 qemu: support URI syntax for NBD
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server.  Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.

The URI syntax also supports relative paths to Unix sockets.  These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.

The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:47:50 -06:00
Paolo Bonzini
be2a15dd60 qemu: support NBD with Unix sockets
This reuses the XML format that was introduced for Gluster.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:27:56 -06:00
Paolo Bonzini
0aa9f522c4 qemu: support named nbd exports
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:12:41 -06:00
Paolo Bonzini
b96e0c18e1 qemu: test NBD command-line builder and parser
Enable more testing of NBD parsing, to ensure rewrites work.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 14:42:45 -06:00
Viktor Mihajlovski
53187afd81 S390: Testcases for virtio-scsi and virtio-rng
Adding test cases for virtio-scsi and virtio-rng. Since ccw is covering
the superset of the s390 bus handling, these are deemed to be sufficient.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-14 15:53:20 -06:00
Viktor Mihajlovski
6c92773256 qemu: Rename virtio-scsi capability
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-14 14:56:11 -06:00
Eric Blake
5ac846e42e qemu: detect multi-head qxl via more than version check
Multi-head QXL support is so useful that distros have started to
backport it to qemu earlier than 1.2.  After discussion with
Alon Levy, we determined that the existence of the qxl-vga.surfaces
property is a reliable indicator of whether '-device qxl-vga' works,
or whether we have to stick to the older '-vga qxl'.  I'm leaving
in the existing check for QEMU_CAPS_DEVICE_VIDEO_PRIMARY tied to
qemu 1.2 and newer (in case qemu is built without qxl support),
but for those distros that backport qxl, this additional capability
check will allow the correct command line for both RHEL 6.3 (which
lacks the feature) and RHEL 6.4 (where qemu still claims to be
version 0.12.2.x, but has backported multi-head qxl).

* src/qemu/qemu_capabilities.c (virQEMUCapsObjectPropsQxlVga): New
property test.
(virQEMUCapsExtractDeviceStr): Probe for backport of new
capability to qemu earlier than 1.2.
* tests/qemuhelpdata/qemu-kvm-1.2.0-device: Update test.
* tests/qemuhelpdata/qemu-1.2.0-device: Likewise.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device:
Likewise.
2013-03-14 09:38:20 -06:00
Daniel P. Berrange
1732c1c629 Fix parsing of SELinux ranges without a category
Normally libvirtd should run with a SELinux label

  system_u:system_r:virtd_t:s0-s0:c0.c1023

If a user manually runs libvirtd though, it is sometimes
possible to get into a situation where it is running

  system_u:system_r:init_t:s0

The SELinux security driver isn't expecting this and can't
parse the security label since it lacks the ':c0.c1023' part
causing it to complain

  internal error Cannot parse sensitivity level in s0

This updates the parser to cope with this, so if no category
is present, libvirtd will hardcode the equivalent of c0.c1023.

Now this won't work if SELinux is in Enforcing mode, but that's
not an issue, because the user can only get into this problem
if in Permissive mode. This means they can now start VMs in
Permissive mode without hitting that parsing error

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-14 12:42:21 +00:00
Peter Krempa
32bd699f55 virtio-rng: Add rate limiting options for virtio-RNG
Qemu's implementation of virtio RNG supports rate limiting of the
entropy used. This patch exposes the option to tune this functionality.

This patch is based on qemu commit 904d6f588063fb5ad2b61998acdf1e73fb4

The rate limiting is exported in the XML as:
<devices>
  ...
  <rng model='virtio'>
    <rate bytes='123' period='1234'/>
    <backend model='random'/>
  </rng>
  ...
2013-03-14 13:28:10 +01:00
Viktor Mihajlovski
3eefaccd47 S390: Testcases for virtio-ccw machines
This adds and corrects testcases for virtio devices on s390
guests.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-03-13 18:21:50 -06:00
Peter Krempa
27cf98e2d1 virCaps: conf: start splitting out irrelevat data
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
2013-03-13 09:27:14 +01:00
Dusty Mabe
d3092c60f7 capabilities: add NUMA memory information
'virsh capabilities' will now include a new <memory> element
per <cell> of the topology, as in:

    <topology>
      <cells num='2'>
        <cell id='0'>
          <memory unit='KiB'>12572412</memory>
          <cpus num='12'>
          ...
        </cell>

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-08 11:51:00 -07:00
Daniel P. Berrange
75e656a363 Fix crash parsing RNG device specification
Code that validates the whitelist for the RNG device filename
didn't account for fact that filename may be NULL. This led
to a NULL reference crash. This wasn't caught since the test
suite was not covering this XML syntax

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-07 12:57:10 +00:00
Eric Blake
4932ef4502 rng: restrict passthrough names to known-good files
There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng.  It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.

[1]https://lists.gnu.org/archive/html/qemu-devel/2013-03/threads.html#00023

* src/conf/domain_conf.c (virDomainRNGDefParseXML): Only allow
/dev/random and /dev/hwrng.
* docs/schemas/domaincommon.rng: Flag invalid files.
* docs/formatdomain.html.in (elementsRng): Document this.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args:
Update test to match.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml:
Likewise.
2013-03-04 17:45:38 -07:00
Daniel P. Berrange
0204d6d7a0 Fix TLS tests with gnutls 3
When given a CA cert with basic constraints to set non-critical,
and key usage of 'key signing', this should be rejected. Version
of GNUTLS < 3 do not rejecte it though, so we never noticed the
test case was broken

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-04 17:42:16 +00:00
Laine Stump
db2536a627 Revert "Add support for <option> tag in network config"
This reverts commit 383ebc4694.

We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
2013-02-27 10:55:24 -05:00
Peter Krempa
2ab08e6cb1 tests: Test XML entities in source path for RNG device
Users may want to specify XML entities in paths to devices. Ensure they
are parsed and used properly.
2013-02-27 11:04:41 +01:00
Ján Tomko
ecc17eb46d tests: fix leaks in storagevolxml2argvtest
Reported by John Ferlan.
2013-02-27 10:11:52 +01:00
Eric Blake
9194679e10 tests: skip virstoragetest on RHEL 5
virstoragetest was failing on RHEL 5, but with no good error message:

TEST: virstoragetest
                                        0   FAIL

It turns out that qemu-img was so old, that it lacked support for
-o backing_file.  It didn't help that the test was also using
qemu-img from PATH, even after first probing for kvm-img.

* tests/virstoragetest.c (testPrepImages): Consistently use
discovered binary.  Skip instead of fail if qemu-img fails during
setup.
2013-02-26 12:53:36 -07:00
Eric Blake
b6176e5226 tests: old automake lacks abs_builddir
On RHEL 5, 'make check' included failures such as:

TEST: virstoragetest
unable to create directory /virstoragedata/sub
unable to return to correct directory, refusing to clean up /virstoragedata

It turns out that with automake 1.9.x, $(abs_builddir) is not
automatically provided.  We have previously worked around this
by using `pwd` before, but because we did not do it everywhere,
we had a number of broken tests.

This patch brings RHEL 5 from 8 failed tests down to 5 (the
remaining failures may be due to bugs in the older libxml2 and
RNG schema validation available in RHEL 5, so I'm not sure if
they can be fixed in libvirt, but I'm still investigating).

* tests/Makefile.am (AM_CFLAGS): Reliably set abs_builddir.
(*_la_CFLAGS): Factor out common settings; delete when nothing
remains to be added.
2013-02-26 10:37:50 -07:00
Eric Blake
eb41338e25 tests: consistent skip messages
On RHEL 5, I noticed this test failure message:

TEST: qemumonitorjsontest
libvirt not compiled with yajl, skippingSKIP: qemumonitorjsontest

* tests/virstoragetest.c (testPrepImages): Use simpler fputs.
* tests/qemumonitorjsontest.c (mymain): Ensure trailing newline.
2013-02-26 10:06:25 -07:00
Eric Blake
dce95297e3 tests: uniformly report test failures
testutils.c likes to print summaries after a test completes,
including if it failed.  But if the test outright exit()s,
this summary is skipped.  Enforce that we return instead of exit.

* cfg.mk (sc_prohibit_exit_in_tests): New syntax check.
* tests/commandhelper.c (main): Fix offenders.
* tests/qemumonitorjsontest.c (mymain): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/securityselinuxlabeltest.c (mymain): Likewise.
* tests/securityselinuxtest.c (mymain): Likewise.
* tests/testutils.h (VIRT_TEST_MAIN_PRELOAD): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
(virtTestCaptureProgramOutput): Use symbolic name.
2013-02-25 17:38:11 -07:00
Eric Blake
f20b047691 tests: don't test json when not compiled in
Now that the segfault is solved, we can skip instead of fail
the test when yajl is not present.

* tests/qemumonitorjsontest.c (mymain): Skip if no yajl.
2013-02-25 17:38:05 -07:00
Eric Blake
848a3b1d5b tests: avoid segfault if json monitor not present
On a machine without yajl headers, I was seeing random segfaults
from qemumonitorjsontest (about 90% of the runs on my particular
machine).  The segfault was inside virClassIsDerivedFrom, which
points to a case of a race leading to unreferencing a stale
pointer to an object that had already been freed.  I also noticed
that if I got the segfault, I was seeing messages such as:

2013-02-22 16:12:37.504+0000: 19833: error : virNetSocketWriteWire:1361 : Cannot write data: Bad file descriptor

which is also evidence of deferencing a stale pointer.  I traced it
to a race where qemuMonitorTestIO could execute late, after the
main thread had already called qemuMonitorTestFree and called
virNetSocketClose(test->client) but not clearing it out to NULL.
Sure enough, after test->client has been closed, fd is -1, which
causes an attempt to write to the socket to fail, which in turn
triggers the error code of qemuMonitorTestIO that tries to re-close
test->client.

* tests/qemumonitortestutils.c (qemuMonitorTestIO): Don't attempt
to free client again if test already quit.
2013-02-25 17:37:14 -07:00
Peter Krempa
e8b70ab743 tests: Add tests for virtio-rng device handling
Adds XML parsing and qemu commandline tests for the VirtIO RNG device
support.
2013-02-25 10:58:04 +01:00
Gene Czarcinski
0b73a763f3 use client id for IPv6 DHCP host definition
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address.  Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used.  According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.

Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.

Documentation and schemas have been updated.

Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
2013-02-25 02:49:06 -05:00
Ján Tomko
81738cd014 storage: move qemu-img options before positional arguments
Modify the expected output of storagevolxml2argv tests as well.
2013-02-24 18:11:40 +01:00
Ján Tomko
56e1b4c30f storage: add test for qemu-img command line generation 2013-02-24 18:11:40 +01:00
Pieter Hollants
383ebc4694 Add support for <option> tag in network config
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.

Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.

Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
2013-02-22 19:45:19 -05:00
Daniel P. Berrange
7ea8c5d140 s/arm/armv7l/ in caps-qemu-kvm.xml
Fix the caps-qemu-kvm.xml test data file to refer to correct
arm arch name.
2013-02-22 15:49:51 +00:00
John Ferlan
11a1181260 commandtest: Resolve some coverity resource leaks 2013-02-16 07:44:35 -05:00
John Ferlan
e2f1fc5220 drivermodule: Ignore coverity warning about leaked_storage 2013-02-16 07:44:34 -05:00
Eric Blake
a18452d0d2 storage: test backing chain traversal
Testing our backing chain handling will make it much easier to
ensure that we avoid issues in the future.  If only I had written
this test before I first caused several regressions...

* tests/virstoragetest.c: New test.
* tests/Makefile.am (test_programs): Build it.
* .gitignore: Ignore new files.
2013-02-15 16:07:01 -07:00
Eric Blake
ec8a2d0327 regex: gnulib guarantees that we have regex support
No need to use HAVE_REGEX_H - our use of gnulib guarantees that
the header exists and works, regardless of platform.  Similarly,
we can unconditionally assume a compiling <sys/wait.h> (although
the mingw version of this header is not full-featured).

* src/storage/storage_backend.c: Drop useless conditional.
* tests/testutils.c: Likewise.
2013-02-15 13:01:23 -07:00
Eric Blake
c6f1060ca7 util: add virendian.h macros
We have several cases where we need to read endian-dependent
data regardless of host endianness; rather than open-coding
these call sites, it will be nicer to funnel things through
a macro.

The virendian.h file can be expanded to add writer functions,
and/or 16-bit access patterns, if needed.  Also, if we need
to turn things into a function to avoid multiple evaluations
of buf, that can be done later.  But for now, a macro worked.

* src/util/virendian.h: New file.
* src/Makefile.am (UTIL_SOURCES): Ship it.
* tests/virendiantest.c: New test.
* tests/Makefile.am (test_programs, virendiantest_SOURCES): Run
the test.
* .gitignore: Ignore built file.
2013-02-12 09:00:15 -07:00
Eric Blake
ca7cc85245 build: fix VPATH testsuite
'make check' has been failing on VPATH builds since commit
907a39e7.  The tests already had magic for munging path names,
but were munging to the wrong location, thus working only on
an in-tree build.

* tests/securityselinuxlabeltest.c (testSELinuxMungePath): Munge
to correct path.
2013-02-11 15:59:42 -07:00
Daniel P. Berrange
11d926659b Turn virSecurityManager into a virObjectLockable
To enable locking to be introduced to the security manager
objects later, turn virSecurityManager into a virObjectLockable
class

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-11 12:33:41 +00:00
Daniel P. Berrange
32803ba409 Rename 'qemuCapsXXX' to 'virQEMUCapsXXX'
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:49:14 +00:00
Daniel P. Berrange
fed92f08db Turn virCapabilities into a virObject
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:26 +00:00
Daniel P. Berrange
9cceb0fc35 Fix PKI directory used for QEMU test suite
The data files for testing QEMU command line generation are
hardcoded to use /etc/pki, so we should explicitly set that
in the test case, avoiding the dynamic SYSCONFDIR value.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:25 +00:00
John Ferlan
1d8b4f0592 valgrind: Adjust the suppression file 2013-02-07 14:08:14 -05:00
John Ferlan
9442d03c48 qemumonitortestutils: Resolve resource leaks found by Valgrind
When Valgrind runs the 'qemumonitorjsontest' it would claim that the
thread created is leaked. That's because the virThreadJoin won't get
called due to the 'running' flag being cleared.  In order to avoid that,
call virThreadJoin unconditionally at cleanup time.  Also noted that the
qemuMonitorTestWorker() didn't get the test mutex lock on the failure path.

The incoming and outgoing buffers allocated by qemuMonitorTestIO() and
qemuMonitorTestAddReponse() were never VIR_FREE()'d in qemuMonitorTestFree().
2013-02-07 14:08:14 -05:00
John Ferlan
3f5250ff8e qemumonitorjsontest: Resolve resource leaks found by Valgrind
The 'package' string returned by qemuMonitorGetVersion() needs to
be VIR_FREE()'d.

testQemuMonitorJSONGetMachines(), testQemuMonitorJSONGetCPUDefinitions(),
and testQemuMonitorJSONGetCommands() did not VIR_FREE() the array and
array elements allocated by their respective qemuMonitorGet* routines.
2013-02-07 14:08:14 -05:00
John Ferlan
785d6bc58a qemuxml2argvtest: Resolve resource leaks found by Valgrind
Valgrind deterimined that fakeSecretGetValue() was using the secret
value without checking validity.  Returning NULL causes the caller
to emit a message and results in failure.

Additionally commit 'b090aa7d' changes leaked vncSASLdir and vncTLSx509certdir
2013-02-07 14:08:14 -05:00
John Ferlan
0eb62708a7 virnettlscontexttest: Resolve memory leak found by Valgrind
testTLSDerEncode() will allocate memory for der.data, it wasn't VIR_FREE()'d.
also don't initialized der to use static buffer.
2013-02-07 14:08:13 -05:00
Eric Blake
98fc0137f1 bitmap: add way to find next clear bit
We had an easy way to iterate set bits, but not for iterating
cleared bits.

* src/util/virbitmap.h (virBitmapNextClearBit): New prototype.
* src/util/virbitmap.c (virBitmapNextClearBit): Implement it.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test4): Test it.
2013-02-05 16:23:14 -07:00
Eric Blake
3a9382ca2a tests: reserve more fds for commandtest
Commit 39c77fe triggered random failures, depending on the platform
and what other fds leak into the testsuite (for me, it passed on
RHEL 6 but failed on Fedora 18).  The reason was that we were
expecting an fd that fell outside of our reserved range.  By reserving
a larger range, the test once again passes on all platforms.

* tests/commandtest.c (mymain): Reserve enough fds.
2013-02-05 10:47:00 -07:00
Daniel P. Berrange
b090aa7d55 Introduce a virQEMUDriverConfigPtr object
Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.

NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-05 15:49:25 +00:00
Michal Privoznik
f0154959b3 tests: Create test for virCommandDoAsyncIO
This is just a basic test, so we don't break virCommand in the
future. A "Hello world\n" string is written to commanhelper,
which copies input to stdout and stderr where we read it from.
Then the read strings are compared with expected values.
2013-02-05 15:45:21 +01:00
Michal Privoznik
39c77fe586 Introduce event loop to commandtest
This is just preparing environment for the next patch, which is
going to need an event loop.
2013-02-05 15:45:21 +01:00
Eric Blake
949ebc3022 tests: add a comment about our fake qmp
While testing QMP, I used a simple qemu session of
'qemu-kvm -M none -nodefaults -nographic -qmp stdio'
for some experiments.  But it took me far too long to remember
the magic invocation to unlock QMP into accepting normal commands.
While I was able to grep libvirt sources and easily find where
libvirt expects the normal "QMP" greeting, I could not find the
proper reply to that greeting nearby.

Reading the testsuite didn't help either, since there we don't
emulate the mandatory handshake.  But since my grep hit the
testsuite, adding a bit of documentation will make it much easier
to jog my memory in the future.

* tests/qemumonitortestutils.c (QEMU_JSON_GREETING): Mention that
the normal counterpart reply is skipped.
2013-01-31 10:15:33 -07:00
Jiri Denemark
d6c8597046 tests: Don't build securityselinuxlabeltest without qemu
Sources for securityselinuxlabeltest are only defined if qemu driver is
enabled so we should not try to build the test if qemu driver is
disabled.
2013-01-31 10:32:43 +01:00
John Ferlan
46b1d8cf7a Enforce return check on virAsprintf() calls
Way back when I started making changes for Coverity messages my first set
were to a bunch of CHECKED_RETURN errors.  In particular virAsprintf() had
a few callers that Coverity noted didn't check their return (although some
did check if the buffer being printed to was NULL or not).

It was suggested at the time as a further patch an ATTRIBUTE_RETURN_CHECK
should be added to virAsprintf(), see:

https://www.redhat.com/archives/libvir-list/2013-January/msg00120.html

This patch does that and fixes a few more instances not found by Coverity
that failed the check.
2013-01-30 14:42:22 -07:00
Josh Durgin
c1509ab47e qemu: escape ipv6 for rbd network disk hosts
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to qemu.

Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.

Acked-by: Osier Yang <jyang@redhat.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2013-01-25 11:48:24 +08:00
John Ferlan
9ff3876cc8 virbitmaptest: Resolve Coverity errors
test1: Need to check for bitmap before using as well as free it properly
test2: need to check for bitsString2 before using it.
2013-01-23 15:02:06 +01:00
John Ferlan
31e0de1a85 tests: Remove VIR_FREE() on static/stack buffer (der.data) 2013-01-23 15:02:06 +01:00
Alon Levy
55bfd020d8 qemu: Support ram bar size for qxl devices
Adds a "ram" attribute globally to the video.model element, that changes
the resulting qemu command line only if video.type == "qxl".

<video>
  <model type='qxl' ram='65536' vram='65536' heads='1'/>
</video>

That attribute gets a default value of 64*1024. The schema is unchanged
for other video element types.

The resulting qemu command line change is the addition of

-global qxl-vga.ram_size=<ram>*1024

or

-global qxl.ram_size=<ram>*1024

For the main and secondary qxl devices respectively.

The default for the qxl ram bar is 64*1024 kilobytes (the same as the
default qxl vram bar size).
2013-01-22 10:40:45 -07:00
John Ferlan
35c30522a5 tests: Need to initialize 'test' properly on error path
In the error path, the test buffer is free'd, but due to how the free
routine is written the 'test' buffer pointer does not return to the caller
as NULL and then the free'd buffer address is returned to the caller.
2013-01-22 17:29:26 +01:00
John Ferlan
3e8502165f commandtest: Need to initialize 'errbuf'
It was possible to call VIR_FREE in cleanup prior to initialization
2013-01-22 17:29:25 +01:00
John Ferlan
ff4eac595f virnetsockettest: Need to initialize 'path'
It was possible to call VIR_FREE in cleanup prior to initialization
2013-01-22 17:29:25 +01:00
Eric Blake
f403bdc189 build: fix build on BSD
A build on FreeBSD failed with:
util/virportallocator.c:108: error: storage size of 'addr' isn't known
util/virportallocator.c:123: error: 'INADDR_ANY' undeclared (first use in this function)

It turns out that while POSIX allows sockaddr_in to leak in through
<arpa/inet.h> (the way Linux does it), it is not mandatory, and
conforming applications are required to get it through <netinet/in.h>.

* src/util/virportallocator.c: Include header for struct
sockaddr_in.
* tests/virportallocatortest.c: Likewise.
2013-01-17 16:39:10 -07:00
Daniel P. Berrange
da5a8aee2b Avoid integer wrap on remotePortMax in QEMU driver
The QEMU driver default max port is 65535, but it then increments
this by 1 to 65536. This maps to 0 in an unsigned short :-( This
was apparently done so that for() loops could use "< max" instead
of "<= max". Remove this insanity and just make the loop do the
right thing.
2013-01-17 13:52:33 +00:00
Daniel P. Berrange
9c9d4d32d3 Add a port allocator class
Introduce a virPortAllocator for managing TCP port allocations.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-16 11:02:58 +00:00
Daniel P. Berrange
325b02b5a3 Convert virDomainObj, qemuAgent, qemuMonitor, lxcMonitor to virObjectLockable
The  virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-16 11:02:58 +00:00
John Ferlan
7ae3f2d53d securityselinuxhelper.c: Don't try to include xattr.h if not available
Commit 907a39e7 missed adding the WITH_ATTR around #include <attr/xattr.h>
resulting in a build failure:

  CC     libsecurityselinuxhelper_la-securityselinuxhelper.lo
  securityselinuxhelper.c:27:24: fatal error: attr/xattr.h: No such file or directory
  compilation terminated.
  make[2]: *** [libsecurityselinuxhelper_la-securityselinuxhelper.lo] Error 1
  make[2]: Leaving directory `/home/jferlan/libvirt.work/tests'
  make[1]: *** [all-recursive] Error 1
  make[1]: Leaving directory `/home/jferlan/libvirt.work'
  make: *** [all] Error 2
2013-01-14 21:00:51 +01:00
Daniel P. Berrange
7184af1364 Add missing stubs to securityselinuxhelper.c
Make sure we override both the raw and non-raw stubs in
securityselinuxhelper.c. Also add diagnostics if
securityselinuxlabeltest fails a test item
2013-01-14 18:34:49 +00:00
Daniel P. Berrange
907a39e735 Add a test suite for validating SELinux labelling
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:40:04 +00:00
Daniel P. Berrange
bccd4a8cbc Rename HAVE_GNUTLS to WITH_GNUTLS 2013-01-14 13:26:47 +00:00
Daniel P. Berrange
321a7d53f3 Convert HAVE_SASL to WITH_SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
49a1c16027 Convert HAVE_YAJL into WITH_YAJL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:22 +00:00
Guannan Ren
fc66c1603c qemu: add usb-net caps flag
QEMU_CAPS_DEVICE_USB_NET /* -device usb-net */
2013-01-10 21:56:31 +08:00
Guannan Ren
f8d478b6df qemu: add usb-serial caps flag
QEMU_CAPS_DEVICE_USB_SERIAL /* -device usb-serial */
2013-01-10 21:26:50 +08:00
John Ferlan
5a4af2a7d6 tests: Remove remnants of removing the fake emulator output
Coverity determined that 'emulator' could no longer be set and determined the
code was dead.  Looking through the history, I discovered commit-id ed769e18
removed code originally added by commit-id 9237e955 and further modified by
commit-id 6a7e7c4f.
2013-01-08 17:19:32 -07:00
Daniel P. Berrange
f587c27768 Make TLS support conditional
Add checks for existence of GNUTLS and automatically disable
it if not found.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-08 20:57:31 +00:00
John Ferlan
51811e4161 Resolve COPY_PASTE error found by Coverity
Fix copy-paste error doing handshake.

The clientShake was not set to true, thus we'd potentially never leave
the handshake while loop.
2013-01-08 16:21:46 +01:00
J.B. Joret
db2b6861dc S390: Enable SCLP Console in QEMU driver
This is the QEMU backend code for the SCLP console support.
It includes SCLP capability detection, QEMU command line generation
and a test case.

Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-01-08 11:37:52 +01:00
Osier Yang
535aed56a2 conf: Parse and format the new XML
Like "rawio", "sgio" is only allowed for block disk of device
type "lun".

It doesn't default disk->sgio to "filtered" when parsing, as
it won't be able to distinguish explicitly requested "filtered"
and a default "filtered" in driver then. We have to error out for
explicit request when the kernel doesn't support the new sysfs
knob "unpriv_sgio", however, for defaulted "filtered", we can
just ignore it if the kernel doesn't support "unpriv_sgio".
2013-01-07 21:38:43 +08:00
John Ferlan
7ac12d84d0 tests: check and handle error for virAsprintf() calls 2013-01-04 10:57:20 -07:00
John Ferlan
0c6e95fe78 Check return on mkdir for LOCKSPACE_DIR 2013-01-04 10:57:09 -07:00
Daniel P. Berrange
f24404a324 Rename virterror.c virterror_internal.h to virerror.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
556cf5f617 Rename xml.{c,h} to virxml.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
44f6ae27fe Rename util.{c,h} to virutil.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
404174cad3 Rename threads.{c,h} to virthread.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
88ba722c12 Rename sysinfo.{c,h} to virsysinfo.{c,h} 2012-12-21 11:19:48 +00:00
Daniel P. Berrange
fde9df8dcc Rename stats_linux.{c,h} to virstatslinux.{c,h} 2012-12-21 11:19:48 +00:00
Daniel P. Berrange
ab9b7ec2f6 Rename memory.{c,h} to viralloc.{c,h} 2012-12-21 11:17:14 +00:00