Our fixes for CVE-2013-4400 were so effective at "fixing" bugs
in virt-login-shell that we ended up fixing it into a useless
do-nothing program.
Commit 3e2f27e1 picked the name LIBVIRT_SETUID_RPC_CLIENT for
the witness macro when we are doing secure compilation. But
commit 9cd6a57d checked whether the name IN_VIRT_LOGIN_SHELL,
from an earlier version of the patch series, was defined; with
the net result that virt-login-shell invariably detected that
it was setuid and failed virInitialize.
Commit b7fcc799 closed all fds larger than stderr, but in the
wrong place. Looking at the larger context, we mistakenly did
the close in between obtaining the set of namespace fds, then
actually using those fds to switch namespace, which means that
virt-login-shell will ALWAYS fail.
This is the minimal patch to fix the regressions, although
further patches are also worth having to clean up poor
semantics of the resulting program (for example, it is rude to
not pass on the exit status of the wrapped program back to the
invoking shell).
* tools/virt-login-shell.c (main): Don't close fds until after
namespace swap.
* src/libvirt.c (virGlobalInit): Use correct macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
The existing check of domain snapshots validated that they
point to a domain, but did not validate that the domain
points to a connection, even though any errors blindly assume
the connection is valid. On the other hand, as mentioned in
commit 6e130ddc, any valid domain is already tied to a valid
connection, and VIR_IS_SNAPSHOT vs. VIR_IS_DOMAIN_SNAPSHOT
makes no real difference; it's best to just validate the chain
of all three. For consistency with previous patches, continue
the trend of using a common macro. For now, we don't need
virCheckDomainSnapshotGoto().
* src/datatypes.h (virCheckDomainSnapshotReturn): New macro.
(VIR_IS_SNAPSHOT, VIR_IS_DOMAIN_SNAPSHOT):
Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibDomainSnapshotError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
While all errors related to invalid nwfilters appeared to be
consistent, we might as well continue the trend of using a
common macro. As in commit 6e130ddc, the difference between
VIR_IS_NWFILTER and VIR_IS_CONNECTED_NWFILTER is moot, since
reference counting means any valid nwfilter is also tied to
a valid connection. For now, we don't need virCheckNWFilterGoto().
* src/datatypes.h (virCheckNWFilterReturn): New macro.
(VIR_IS_NWFILTER, VIR_IS_CONNECTED_NWFILTER): Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibNWFilterError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
For streams validation, we weren't consistent on whether to
use VIR_FROM_NONE or VIR_FROM_STREAMS. Furthermore, in many
API, we want to ensure that a stream is tied to the same
connection as the other object we are operating on; while
other API failed to validate the stream at all. And the
difference between VIR_IS_STREAM and VIR_IS_CONNECTED_STREAM
is moot; as in commit 6e130ddc, we know that reference
counting means a valid stream will always be tied to a valid
connection. Similar to previous patches, use a common macro
to make it nicer.
* src/datatypes.h (virCheckStreamReturn, virCheckStreamGoto):
New macros.
(VIR_IS_STREAM, VIR_IS_CONNECTED_STREAM): Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibStreamError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
While all errors related to invalid secrets appeared to be
consistent, we might as well continue the trend of using a
common macro. Just as in commit 6e130ddc, the difference
between VIR_IS_SECRET and VIR_IS_CONNECTED_SECRET is moot
(due to reference counting, any valid secret must be tied to
a valid domain). For now, we don't need virCheckSecretGoto().
* src/datatypes.h (virCheckSecretReturn): New macro.
(VIR_IS_SECRET, VIR_IS_CONNECTED_SECRET): Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibSecretError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
While all errors related to invalid node device appeared to be
consistent, we might as well continue the trend of using a
common macro. For now, we don't need virCheckNodeDeviceGoto().
* src/datatypes.h (virCheckNodeDeviceReturn): New macro.
(VIR_IS_NODE_DEVICE, VIR_IS_CONNECTED_NODE_DEVICE): Drop
unused macros.
* src/libvirt.c: Use macro throughout.
(virLibNodeDeviceError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
The commit cad3cf9a95 introduced a crash
due to wrong order of parameters being passed to the function. When
deleting an element, the function decreased the iterator instead of
count and if listing volumes after that (or undefining the pool, NULL
was being dereferenced.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For storage volume validation, we weren't consistent on
whether to use VIR_FROM_NONE or VIR_FROM_STORAGE. Similar
to previous patches, use a common macro to make it nicer.
Furthermore, just as in commit 6e130ddc, the difference
between VIR_IS_STORAGE_VOL and VIR_IS_CONNECTED_STORAGE_VOL
is moot (due to reference counting, any valid volume must
be tied to a valid connection).
virStorageVolCreateXMLFrom allows cross-connection cloning,
where the error is reported against the connection of the
destination pool.
* src/datatypes.h (virCheckStorageVolReturn)
(virCheckStorageVolGoto): New macros.
(VIR_IS_STORAGE_VOL, VIR_IS_CONNECTED_STORAGE_VOL): Drop
unused macros.
* src/libvirt.c: Use macro throughout.
(virLibStorageVolError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
This basically reverts commit ba64b97134
"libxl: Allow libxl to set NIC devid". However assigning devid's
before calling libxlMakeNic does not work as that is calling
libxl_device_nic_init which sets it back to -1.
Right now auto-assignment only works in the hotplug case. But even if
that would be fixed at some point (if that is possible at all), this
would add a weird dependency between Xen and libvirt versions.
The change here should accept any auto-assignment that makes it into
libxl_device_nic_init. My understanding is that a caller always is
allowed to make the devid choice itself. And assuming libxlMakeNicList
is only used on domain creation, a sequential numbering should be ok.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
virStoragePoolBuild reported an invalid pool as if it were an
invalid network. Likewise, we weren't consistent on whether to
use VIR_FROM_NONE or VIR_FROM_STORAGE. Similar to previous
patches, use a common macro to make it nicer. Furthermore, just
as in commit 6e130ddc, the difference between VIR_IS_STORAGE_POOL
and VIR_IS_CONNECTED_STORAGE_POOL is moot (due to reference
counting, any valid pool must be tied to a valid connection).
For now, we don't need virCheckStoragePoolGoto().
* src/datatypes.h (virCheckStoragePoolReturn): New macro.
(VIR_IS_STORAGE_POOL, VIR_IS_CONNECTED_STORAGE_POOL): Drop
unused macros.
* src/libvirt.c: Use macro throughout.
(virLibStoragePoolError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
There is no easy way to test authentication against libvirt. This
commit modifies the test driver to allow simple username/password
authentication.
You modify the test XML by adding:
<node>
...
<auth>
<user password="123456">rich</user>
<user>jane</user>
</auth>
</node>
If there are any /node/auth/user elements, then authentication is
required by the test driver (if none are present, then the test driver
will work as before and not require authentication).
In the example above, two phony users are added:
rich password: 123456
jane no password required
The test driver will demand a username. If the password attribute is
present (or if the username entered is wrong), then the password is
also asked for and checked:
$ virsh -c test://$(pwd)/testnode.xml list
Enter username for localhost: rich
Enter rich's password for localhost: ***
Id Name State
----------------------------------------------------
1 fv0 running
2 fc4 running
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
When checking for a valid interface, we weren't consistent on
whether we reported as VIR_FROM_NONE or VIR_FROM_INTERFACE.
Similar to previous patches, use a common macro to make it nicer.
Furthermore, just as in commit 6e130ddc, the difference between
VIR_IS_INTERFACE and VIR_IS_CONNECTED_INTERFACE is moot (due to
reference counting, any valid interface must be tied to a valid
connection). For now, we don't need virCheckInterfaceGoto().
* src/datatypes.h (virCheckInterfaceReturn): New macro.
(VIR_IS_INTERFACE, VIR_IS_CONNECTED_INTERFACE): Drop unused
macros.
* src/libvirt.c: Use macro throughout.
(virLibInterfaceError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit cfd62c1 was incomplete; I found more cases where error
messages were being overwritten, and where the code between
the three registration/deregistration APIs was not consistent.
Since it is fairly easy to trigger an attempt to deregister an
unregistered object through public API, I also changed the error
message from VIR_ERR_INTERNAL_ERROR to VIR_ERR_INVALID_ARG.
* src/conf/object_event.c (virObjectEventCallbackListEventID):
Inline...
(virObjectEventStateEventID): ...into lone caller, and report
error on failure.
(virObjectEventCallbackListAddID, virObjectEventStateCallbackID)
(virObjectEventCallbackListRemoveID)
(virObjectEventCallbackListMarkDeleteID): Tweak error category.
* src/remote/remote_driver.c (remoteConnectDomainEventRegister):
Don't leak registration on failure.
(remoteConnectDomainEventDeregisterAny)
(remoteConnectNetworkEventDeregisterAny): Don't overwrite error.
Signed-off-by: Eric Blake <eblake@redhat.com>
When checking for a valid network, we weren't consistent on
whether we reported an invalid network or a connection. Similar
to previous patches such as commit 6e130ddc, the difference
between VIR_IS_NETWORK and VIR_IS_CONNECTED_NETWORK is moot (due
to reference counting, any valid network must be tied to a valid
connection). Use a common macro to make the error reporting
for invalid networks nicer.
* src/datatypes.h (virCheckNetworkReturn, virCheckNetworkGoto): New
macros.
(VIR_IS_NETWORK, VIR_IS_CONNECTED_NETWORK): Drop unused macros.
* src/libvirt.c: Use macro throughout.
(virLibNetworkError): Drop unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
Like commit 94a26c7e from Eric Blake, the old fuzzy code should
be replaced by the new array management macros now.
And the type of scsi->count should be changed into "size_t", and
thus virSCSIDeviceListCount should return size_t instead, similar
for vir{PCI,USB}DeviceListCount.
the unix socket /var/run/libvirt/lxc/domain.sock is not created
under the selinux context which configured by <seclabel>.
If we try to connect the domain.sock under the selinux context
of domain in virtLXCProcessConnectMonitor,selinux will deny
this connect operation.
type=AVC msg=audit(1387953696.067:662): avc: denied { connectto } for pid=21206 comm="libvirtd" path="/usr/local/var/run/libvirt/lxc/systemd.sock" scontext=unconfined_u:system_r:svirt_lxc_net_t:s0:c770,c848 tcontext=unconfined_u:system_r:unconfined_t:s0-s0:c0.c1023 tclass=unix_stream_socket
fix this problem by creating socket under selinux context of domain.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The function checks for @conn to be valid and locks its mutex. Then, it
checks if callee is unregistering the same callback that he registered
previously. If this fails an error is reported and the control jumps to
'error' label. Here, if @conn has some errors (and it certainly does -
the one that's been just reported) the conn->mutex is locked again -
without any previous unlock:
Thread 1 (Thread 0x7fb500ef1800 (LWP 18982)):
#0 __lll_lock_wait () at ../nptl/sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:135
#1 0x00007fb4fd99ce56 in _L_lock_918 () from /lib64/libpthread.so.0
#2 0x00007fb4fd99ccaa in __GI___pthread_mutex_lock (mutex=0x7fb50153b670) at pthread_mutex_lock.c:64
#3 0x00007fb5007e574d in virMutexLock (m=m@entry=0x7fb50153b670) at util/virthreadpthread.c:85
#4 0x00007fb5007b198e in virDispatchError (conn=conn@entry=0x7fb50153b5e0) at util/virerror.c:594
#5 0x00007fb5008a3735 in virConnectUnregisterCloseCallback (conn=0x7fb50153b5e0, cb=cb@entry=0x7fb500f588e0 <vshCatchDisconnect>) at libvirt.c:21025
#6 0x00007fb500f5d690 in vshReconnect (ctl=ctl@entry=0x7fffff60e710) at virsh.c:328
#7 0x00007fb500f5dc50 in vshCommandRun (ctl=ctl@entry=0x7fffff60e710, cmd=0x7fb50152ca80) at virsh.c:1755
#8 0x00007fb500f5861b in main (argc=<optimized out>, argv=<optimized out>) at virsh.c:3393
And since the conn's mutex is not recursive, the virDispatchError will
never ever lock it successfully.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Cleanup after a previous patch, commit 6e130dd. In particular,
note that xenDomainUsedCpus can only be reached from
xenUnifiedDomainGetXMLDesc, which in turn is only reached from
public API that already validated the domain.
* src/xen/xen_driver.c (xenDomainUsedCpus): Drop redundant check.
* src/datatypes.h (VIR_IS_DOMAIN, VIR_IS_CONNECTED_DOMAIN):
Delete, and inline into all callers, since no other file uses it
any more.
Signed-off-by: Eric Blake <eblake@redhat.com>
In datatype.c, virGetDomainSnapshot could result in the message:
error: invalid domain pointer in bad domain
Furthermore, while there are a few functions in libvirt.c that
only care about a virDomainPtr without regards to the connection
(such as virDomainGetName), most functions also require a valid
connection. Yet several functions were blindly dereferencing
the conn member without checking it for validity first (such as
virDomainOpenConsole). Rather than try and correct all usage
of VIR_IS_DOMAIN vs. VIR_IS_CONNECTED_DOMAIN, it is easier to
just blindly require that a valid domain object always has a
valid connection object (which should be true anyways, since
every domain object holds a reference to its connection, so the
connection will not be closed until all domain objects have
also been closed to release their reference).
After this patch, all places that validate a domain consistently
report:
error: invalid domain pointer in someFunc
* src/datatypes.h (virCheckDomainReturn, virCheckDomainGoto): New
macros.
* src/datatypes.c (virGetDomainSnapshot): Use new macro.
(virLibConnError): Delete unused macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
While comparing network and domain events, I noticed that the
test driver had to do a cast in one place and not the other.
For consistency, we should hide the necessary casting as low
as possible in the stack, with everything else using saner
types.
* src/conf/network_event.h (virNetworkEventStateRegisterID): Alter
type.
* src/conf/network_event.c (virNetworkEventStateRegisterID): Hoist
cast here.
* src/test/test_driver.c (testConnectNetworkEventRegisterAny):
Simplify callers.
* src/remote/remote_driver.c
(remoteConnectNetworkEventRegisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventRegisterAny): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If a user registers for a domain event filtered to a particular
domain, but the persistent domain is offline at the time, then
the code silently failed to set up the filter. As a result,
the event fires for all domains, rather than being filtered.
Network events were immune, since they always passed an id
0 argument.
The key to this patch is realizing that
virObjectEventDispatchMatchCallback() only cared about uuid;
so refusing to create a meta for a negative id is pointless,
and in fact, malloc'ing meta at all was overkill; instead,
just directly store a uuid and a flag of whether to filter.
Note that virObjectEventPtr still needs all fields of meta,
because this is how we reconstruct a virDomainPtr inside the
dispatch handler before calling the end user's callback
pointer with the correct object, even though only the uuid
portion of meta is used in deciding whether a callback
matches the given event. So while uuid is optional for
callbacks, it is mandatory for events.
The change to testDomainCreateXMLMixed is merely on the setup
scenario (as you can't register for a domain unless it is either
running or persistent). I actually first wrote that test for
this patch, then rebased it to also cover a prior patch (commit
4221d64), but had to adjust it for that patch to use Create
instead of Define for setting up the domain long enough to
register the event in order to work around this bug. But while
the setup is changed, the main body of the test is still about
whether creation events fire as expected.
* src/conf/object_event_private.h (_virObjectEventCallback):
Replace meta with uuid and flag.
(virObjectEventCallbackListAddID): Update signature.
* src/conf/object_event.h (virObjectEventStateRegisterID):
Likewise.
* src/conf/object_event_private.h (virObjectEventNew): Document
use of name and uuid in events.
* src/conf/object_event.c (virObjectEventCallbackListAddID): Drop
arguments that don't affect filtering.
(virObjectEventCallbackListRemoveID)
(virObjectEventDispatchMatchCallback)
(virObjectEventStateRegisterID): Update clients.
* src/conf/domain_event.c (virDomainEventCallbackListAdd)
(virDomainEventStateRegisterID): Likewise.
* src/conf/network_event.c (virNetworkEventStateRegisterID):
Likewise.
* tests/objecteventtest.c (testDomainCreateXMLMixed): Enhance test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Consider these two calls, in either order:
id1 = virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(callback), NULL, NULL);
virConnectDomainEventRegister(conn, callback, NULL, NULL);
Right now, the second call fails, because under the hood, the
old-style function registration is tightly coupled to the
new style lifecycle eventID, and the two calls both try
to register the same global eventID callback representation.
We've alreay documented that users should avoid old-style
registration and deregistration, so anyone heeding the advice
won't run into this situation. But it would be even nicer if
we pretend the two interfaces are completely separate, and
disallow any cross-linking. That is, a call to old-style
deregister should never remove a new-style callback even if it
is the same function pointer, and a call to new-style callback
using only callbackIDs obtained legitimately should never
remove an old-style callback (of course, since our callback
IDs are sequential, and there is still coupling under the
hood, you can easily guess the callbackID of an old style
registration and use new-style deregistration to nuke it - but
that starts to be blatantly bad coding on your part rather
than a surprising result on what looks like reasonable
stand-alone API).
With this patch, you can now register a global lifecycle event
handler twice, by using both old and new APIs; if such an event
occurs, your callback will be entered twice. But that is not a
problem in practice, since it is already possible to use the
new API to register both a global and per-domain event handler
using the same function, which will likewise fire your callback
twice for that domain. Duplicates are still prevented when
using the same API with same parameters twice (old-style twice,
new-style global twice, or new-style per-domain with same domain
twice), and things are still bounded (it is not possible to
register a single function pointer more than N+2 times per event
id, where N is the number of domains available on the connection).
Besides, it has always been possible to register as many
separate function pointers on the same event id as desired,
through either old or new style API, where the bound there is
the physical limitation of writing a program with enough
distinct function pointers.
Adding another event registration in the testsuite is sufficient
to cover this, where the test fails without the rest of the patch.
* src/conf/object_event.c (_virObjectEventCallback): Add field.
(virObjectEventCallbackLookup): Add argument.
(virObjectEventCallbackListAddID, virObjectEventStateCallbackID):
Adjust callers.
* tests/objecteventtest.c (testDomainCreateXMLMixed): Enhance test.
Signed-off-by: Eric Blake <eblake@redhat.com>
On the surface, this sequence of API calls should succeed:
id1 = virConnectDomainEventRegisterAny(..., VIR_DOMAIN_EVENT_ID_LIFECYCLE,...);
id2 = virConnectDomainEventRegisterAny(..., VIR_DOMAIN_EVENT_ID_RTC_CHANGE,...);
virConnectDomainEventDeregisterAny(id1);
id1 = virConnectDomainEventRegisterAny(..., VIR_DOMAIN_EVENT_ID_LIFECYCLE,...);
And for test:///default, it does. But for qemu:///system, it fails:
libvirt: XML-RPC error : internal error: domain event 0 already registered
Looking closer, the bug is caused by miscommunication between
the object event engine and the client side of the remote driver.
In our implementation, we set up a single server-side event per
eventID, then the client side replicates that one event to all
callbacks that have been registered client side. To know when
to turn the server side eventID on or off, the client side must
track how many events for the same eventID have been registered.
But while our code was filtering by eventID on event registration,
it did not filter on event deregistration. So the above API calls
resulted in the deregister returning 1 instead of 0, so no RPC
deregister was issued, and the final register detects on the
server side that the server is already handling eventID 0.
Unfortunately, since the problem is only observable on remote
connections, it's not possible to enhance objecteventtest to
expose the semantics using only public API entry points.
* src/conf/object_event.c (virObjectEventCallbackListCount): New
function.
(virObjectEventCallbackListAddID)
(virObjectEventCallbackListRemoveID)
(virObjectEventCallbackListMarkDeleteID): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the host is configured with very restrictive firewall (default policy
is DROP for all chains, including OUTPUT), the bridge driver for Linux
adds netfilter entries to allow DHCP and DNS requests to go from the VM
to the dnsmasq of the host.
The issue that this commit fixes is the fact that a DROP policy on the OUTPUT
chain blocks the DHCP replies from the host’s dnsmasq to the VM.
As DHCP replies are sent in UDP, they are not caught by any --ctstate ESTABLISHED
rule and so, need to be explicitly allowed.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr.eu.org>
When determining if a device is behind a PCI bridge, the PCI device
class is checked by reading the config space. However, there are some
devices which have the wrong class on the config space, but the class is
initialized by Linux correctly as a PCI BRIDGE. This class can be read
by the sysfs file '/sys/bus/pci/devices/xxxx:xx:xx.x/class'.
One example of such bridge is IBM PCI Bridge 1014:03b9, which is
identified as a Host Bridge when reading the config space.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Tighten up scope after the previous patch avoided using
internals. This will also make it easier to change
internal implementation without having to chase down quite
as many impacted callers or worrying about two files getting
implementations out of sync.
* src/conf/object_event_private.h
(virObjectEventCallbackListAddID, virObjectEventQueueClear)
(virObjectEventStateLock, virObjectEventStateUnlock)
(virObjectEventTimer): Drop prototype.
(_virObjectEventCallbackList, _virObjectEventState)
(_virObjectEventCallback): Move...
* src/conf/object_event.c: ...here.
(virObjectEventCallbackListAddID, virObjectEventQueueClear)
(virObjectEventStateLock, virObjectEventStateUnlock)
(virObjectEventTimer): Mark private.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, the older virConnectDomainEventRegister (takes a
function pointer, returns 0 on success) and the newer
virConnectDomainEventRegisterID (takes an eventID, returns a
callbackID) share the underlying implementation (the older
API ends up consuming a callbackID for eventID 0 under the
hood). We implemented that by a lot of copy and pasted
code between object_event.c and domain_event.c, according to
whether we are dealing with a function pointer or an eventID.
However, our copy and paste is not symmetric. Consider this
sequence:
id1 = virConnectDomainEventRegisterAny(conn, dom,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(callback), NULL, NULL);
virConnectDomainEventRegister(conn, callback, NULL, NULL);
virConnectDomainEventDeregister(conn, callback);
virConnectDomainEventDeregsiterAny(conn, id1);
the first three calls would succeed, but the third call ended
up nuking the id1 callbackID (the per-domain new-style handler),
then the fourth call failed with an error about an unknown
callbackID, leaving us with the global handler (old-style) still
live and receiving events. It required another old-style
deregister to clean up the mess. Root cause was that
virDomainEventCallbackList{Remove,MarkDelete} were only
checking for function pointer match, rather than also checking
for whether the registration was global.
Rather than playing with the guts of object_event ourselves
in domain_event, it is nicer to add a mapping function for the
internal callback id, then share common code for event removal.
For now, the function-to-id mapping is used only internally;
I thought about whether a new public API to let a user learn
the callback would be useful, but decided exposing this to the
user is probably a disservice, since we already publicly
document that they should avoid the old style, and since this
patch already demonstrates that older libvirt versions have
weird behavior when mixing old and new styles.
And like all good bug fix patches, I enhanced the testsuite,
validating that the changes in tests/ expose the failure
without the rest of the patch.
* src/conf/object_event.c (virObjectEventCallbackLookup)
(virObjectEventStateCallbackID): New functions.
(virObjectEventCallbackLookup): Use helper function.
* src/conf/object_event_private.h (virObjectEventStateCallbackID):
Declare new function.
* src/conf/domain_event.c (virDomainEventStateRegister)
(virDomainEventStateDeregister): Let common code handle the
complexity.
(virDomainEventCallbackListRemove)
(virDomainEventCallbackListMarkDelete)
(virDomainEventCallbackListAdd): Drop unused functions.
* tests/objecteventtest.c (testDomainCreateXMLMixed): New test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since the introduction of network events, any driver that uses
a single event state object to track both domain and network
events should not include 'domain' in the name of that object.
* src/test/test_driver.c (_testConn):
s/domainEventState/eventState/, and fix all callers.
* src/remote/remote_driver.c (private_data): Likewise.
(remoteDomainEventQueue): Rename to remoteEventQueue.
(remoteDomainEvents): Rename to remoteEvents.
Signed-off-by: Eric Blake <eblake@redhat.com>
Prior to this patch, every test:/// URI has its own event manager,
which means that registering for an event can only ever receive
events from the connection where it issued the API that triggered
the event. But the whole idea of events is to be able to learn
about something where an API call did NOT trigger the action.
In order to actually test asynchronous events, I wanted to be able
to tie multiple test connections to the same state. Use of a file
in a test URI is still per-connection state, but now parallel
connections to test:///default (from the same binary, of course)
now share common state and can affect one another.
The updated testsuite fails without the rest of this patch.
Valgrind didn't report any leaks.
* src/test/test_driver.c (testConnectOpen): Move per-connection
state initialization...
(testOpenFromFile): ...here.
(defaultConn, defaultConnections, defaultLock, testOnceInit): New
shared state.
(testOpenDefault): Only initialize on first connection.
(testConnectClose): Don't clobber state if still shared.
* tests/objecteventtest.c (testDomainStartStopEvent): Enhance to
cover this.
(timeout, mymain): Ensure test fails rather than blocks.
Signed-off-by: Eric Blake <eblake@redhat.com>
The @name variable is VIR_STRDUP()-ed into, but never freed. In fact,
there's no need to duplicate a command line argument since all places
where @name is used expect const char.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
CVE-2013-6458
Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.
CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069
When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.
That said, every API that is going to begin a job should do that before
fetching data from vm->def.
This patch fixes a segmentation fault when creating new virtual machines using QEMU.
The segmentation fault is caused by commit f41830680e
and commit cbb6ec42e2.
In virQEMUCapsProbeQMPMachineTypes, when copying machines to qemuCaps, "none" is skipped.
Therefore, the value of i and "qemuCaps->nmachineTypes - 1" do not always match.
However, defIdx value (used to call virQEMUCapsSetDefaultMachine) is set using the value in i
when the array elements are in qemuCaps->nmachineTypes - 1.
So, when libvirt tries to create virtual machines using the default machine type,
qemuCaps->machineTypes[defIdx] is accessed and since the defIdx is NULL, it results in segmentation fault.
Signed-off-by: Yudai Yamagishi <yummy@sfc.wide.ad.jp>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Cleanup after commit db3dd08 removed all clients outside of
the .h file.
* src/datatypes.h (VIR_IS_CONNECT): Delete, and inline into all
callers, since no other file uses it any more.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ever since their introduction (commit 1509b80 in v0.5.0 for
virConnectDomainEventRegister, commit 4445723 in v0.8.0 for
virConnectDomainEventDeregisterAny), the event deregistration
functions have been documented as returning 0 on success;
likewise for older registration (only the newer RegisterAny
must return a non-zero callbackID). And now that we are
adding virConnectNetworkEventDeregisterAny for v1.2.1, it
should have the same semantics.
Fortunately, all of the stateful drivers have been obeying
the docs and returning 0, thanks to the way the remote_driver
tracks things (in fact, the RPC wire protocol is unable to
send a return value for DomainEventRegisterAny, at least not
without adding a new RPC number). Well, except for vbox,
which was always failing deregistration, due to failure to
set the return value to anything besides its initial -1.
But for local drivers, such as test:///default, we've been
returning non-zero numbers; worse, the non-zero numbers have
differed over time. For example, in Fedora 12 (libvirt 0.8.2),
calling Register twice would return 0 and 1 [the callbackID
generated under the hood]; while in Fedora 20 (libvirt 1.1.3),
it returns 1 and 2 [the number of callbacks registered for
that event type]. Since we have changed the behavior over
time, and since it differs by local vs. remote, we can safely
argue that no one could have been reasonably relying on any
particular behavior, so we might as well obey the docs, as well
as prepare callers that might deal with older clients to not be
surprised if the docs are not strictly followed.
For consistency, this patch fixes the code for all drivers,
even though it only makes an impact for vbox and for local
drivers. By fixing all drivers, future copy and paste from
a remote driver to a local driver is less likely to
reintroduce the bug.
Finally, update the testsuite to gain some coverage of the
issue for local drivers, including the first test of old-style
domain event registration via function pointer instead of
event id.
* src/libvirt.c (virConnectDomainEventRegister)
(virConnectDomainEventDeregister)
(virConnectDomainEventDeregisterAny): Clarify docs.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventDeregister)
(libxlConnectDomainEventDeregisterAny): Match documentation.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventDeregister)
(lxcConnectDomainEventDeregisterAny): Likewise.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventDeregister)
(testConnectDomainEventDeregisterAny)
(testConnectNetworkEventDeregisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventDeregister)
(umlConnectDomainEventDeregisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxConnectDomainEventRegister)
(vboxConnectDomainEventDeregister)
(vboxConnectDomainEventDeregisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventDeregister)
(xenUnifiedConnectDomainEventDeregisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventDeregisterAny): Likewise.
* tests/objecteventtest.c (testDomainCreateXMLOld): New test.
(mymain): Run it.
(testDomainCreateXML): Check return values.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, the qemuProcessStop tries to open the domain log file
and saves the original error afterwards. Then all the cleanup is
done after which the error is restored back. This has however one
flaw: if opening of the log file fails an error is reported,
which results in previous error being overwritten (the useful
one, e.g. "PCI device XXXX:XXXX could not be found"). Hence, user
sees something like:
error: failed to create logfile /var/log/libvirt/qemu/ovirt_usb.log: No such file or directory
instead of:
error: internal error: Did not find USB device 8644:8003
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reported-by: Zhou Yimin <zhouyimin@huawei.com>
@listenAddress and @cookiein arguments, should be exchanged,
because the order of the caller and the callee does not match.
This results in the listen address being ignored for peer-to-peer
migration and the cookie being ignored for v2 migration.
Introduced by c4ac7ef (v1.1.4-rc1~141).
https://bugzilla.redhat.com/show_bug.cgi?id=1049338
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The libvirt_internal.h header was included by the internal.h header.
This made it painful to add new stuff to the header file that would
require some more specific types. Remove inclusion by internal.h and add
it to appropriate places manually.
The datatype.c object checks could result in a message like:
error: invalid connection pointer in no connection
This consolidates all clients of this message to have uniform contents:
error: invalid connection pointer in someFunc
Note that virCheckConnectReturn raises an error immediately; in
datatypes.c, where we don't need to raise the error (but instead
just leave it in the thread-local setting), we use
virCheckConnectGoto and the cleanup label instead. Then, for
consistency in that file, all subsequent error messages are
touched to also use the cleanup error label.
* src/datatypes.h (virCheckConnectReturn)
(virCheckConnectGoto): New macros.
* src/datatypes.c: Use new macro.
* src/libvirt-qemu.c (virDomainQemuAttach): Likewise.
(virLibConnError): Delete unused macro.
* src/libvirt-lxc.c (virLibConnError): Likewise.
* src/libvirt.c: Use new macro throughout.
* docs/api_extension.html.in: Modernize documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
As pointed out by the Xen folks [1], HVM nics should always be set
to type LIBXL_NIC_TYPE_VIF_IOEMU unless the user explicity requests
LIBXL_NIC_TYPE_VIF via model='netfront'. The current logic in
libxlMakeNic() only sets the nictype to LIBXL_NIC_TYPE_VIF_IOEMU if
a model is specified that is not 'netfront', which breaks PXE booting
configurations where no model is specified (i.e. use the hypervisor
default).
Reported-by: Stefan Bader <stefan.bader@canonical.com>
[1] https://www.redhat.com/archives/libvir-list/2013-December/msg01156.html
This reverts commit aa4619337c.
This patch was accidentally pushed prematurely, and has incorrect
logic for which shutdown methods to attempt.
Signed-off-by: Eric Blake <eblake@redhat.com>
AArch64 qemu has similar behavior as armv7l, like use of mmio etc.
This patch adds similar bypass checks what we have for armv7l to aarch64.
E.g. we are enabling mmio transport for Nicdev.
Making addDefaultUSB and addDefaultMemballoon to false etc.
V3:
- Adding missing domain rng schema for aarcg64 and test case in
testutilsqemu.c which was causing test suite failure
while running make check.
V2:
- Added testcase to qemuxml2argvtest as suggested
during review comments of V1.
V1:
- Initial patch.
Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
Some of our operation denied messages are outright stupid; for
example, if virIdentitySetAttr fails:
error: operation Identity attribute is already set forbidden for read only access
This patch fixes things to a saner:
error: operation forbidden: Identity attribute is already set
It also consolidates the most common usage pattern for operation
denied errors: read-only connections preventing a public API. In
this case, 'virsh -r -c test:///default destroy test' changes from:
error: operation virDomainDestroy forbidden for read only access
to:
error: operation forbidden: read only access prevents virDomainDestroy
Note that we were previously inconsistent on which APIs used
VIR_FROM_DOM (such as virDomainDestroy) vs. VIR_FROM_NONE (such as
virDomainPMSuspendForDuration). After this patch, all uses
consistently use VIR_FROM_NONE, on the grounds that it is unlikely
that a caller learning that a call is denied can do anything in
particular with extra knowledge which error domain the call belongs
to (similar to what we did in commit baa7244).
* src/util/virerror.c (virErrorMsg): Rework OPERATION_DENIED error
message.
* src/internal.h (virCheckReadOnlyGoto): New macro.
* src/util/virerror.h (virReportRestrictedError): New macro.
* src/libvirt-lxc.c: Use new macros.
* src/libvirt-qemu.c: Likewise.
* src/libvirt.c: Likewise.
* src/locking/lock_daemon.c (virLockDaemonClientNew): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1047234
Add a range check for supported numa memory placement modes provided by
the user before setting them in the domain definition. Without the check
the user is able to provide a (yet) unknown mode which is then stored in
the domain definition. This potentially causes a NULL dereference when
the defintion is formatted into the XML.
To reproduce run:
virsh numatune DOMNAME --mode 6 --nodeset 0
The XML will then contain:
<numatune>
<memory mode='(null)' nodeset='0'/>
</numatune>
With this fix, the command fails:
error: Unable to change numa parameters
error: invalid argument: unsupported numa_mode: '6'
Add whitespace to separate logical code blocks, reformat error messages
and clean up code flow.
This patch changes error handling in some cases where the the loop would
be continued to jump to cleanup instead and error out rather than modify
the domain any further.
We might as well take advantage of viralloc.h instead of open-coding
array management ourselves. While at it, I simplified several
places that were doing repetitive pointer chasing to use an
intermediate variable for legibility (some other places remain,
but they will disapper in later refactoring patches).
* src/conf/object_event_private.h (_virObjectEventCallbackList):
Use size_t for count.
* src/conf/object_event.c (_virObjectEventQueue): Likewise.
(virObjectEventCallbackListRemoveID): Use VIR_DELETE_ELEMENT.
(virObjectEventQueuePush, virObjectEventCallbackListAddID): Use
VIR_APPEND_ELEMENT.
(virObjectEventCallbackListEventID)
(virObjectEventStateDispatchCallbacks): Simplify code.
Signed-off-by: Eric Blake <eblake@redhat.com>
No need to use an int that only ever stores 0 and 1.
* src/conf/object_event_private.h (_virObjectEventCallback):
Change deleted to bool.
* src/conf/object_event.c (virObjectEventDispatchMatchCallback):
Switch return type to bool.
(virObjectEventCallbackListMarkDeleteID): Update client.
* src/conf/domain_event.c (virDomainEventCallbackListMarkDelete):
Likewise.
Do not leave the PCI address of the primary video card set
to the legacy default (0000:00:02.0) if we're doing two-pass
allocation.
Since QEMU 1.6 (QEMU_CAPS_VIDEO_PRIMARY) we allow the primary
video card to be on other slots than 0000:00:02.0 (as we use
-device instead of -vga).
However we fail to assign it an address if:
* another device explicitly uses 0000:00:02.0 and
* the primary video device has no address specified
On the first pass, we have set the address to default, then checked
if it's available, leaving it set even if it wasn't. This address
got picked up by the second pass, resulting in a conflict:
XML error: Attempted double use of PCI slot 0000:00:02.0
(may need "multifunction='on'" for device on function 0)
Also fix the test that was supposed to catch this.
We weren't very consistent in our use of VIR_ERR_NO_SUPPORT; many
users just passed __FUNCTION__ on, while others passed "%s" to
silence over-eager compilers that warn about __FUNCTION__ not
containing any %. It's nicer to route all these uses through
a single macro, so that if we ever need to change the reporting,
we can do it in one place.
I verified that 'virsh -c test:///default qemu-monitor-command test foo'
gives the same error message before and after this patch:
error: this function is not supported by the connection driver: virDomainQemuMonitorCommand
Note that in libvirt.c, we were inconsistent on whether virDomain*
API used virLibConnError() (with VIR_FROM_NONE) or virLibDomainError()
(with VIR_FROM_DOMAIN); this patch unifies these errors to all use
VIR_FROM_NONE, on the grounds that it is unlikely that a caller
learning that a call is unimplemented can do anything in particular
with extra knowledge of which error domain it belongs to.
One particular change to note is virDomainOpenGraphics which was
trying to fail with VIR_ERR_NO_SUPPORT after a failed
VIR_DRV_SUPPORTS_FEATURE check; all other places that fail a
feature check report VIR_ERR_ARGUMENT_UNSUPPORTED.
* src/util/virerror.h (virReportUnsupportedError): New macro.
* src/libvirt-qemu.c: Use new macro.
* src/libvirt-lxc.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/security/security_manager.c: Likewise.
* src/util/virinitctl.c: Likewise.
* src/libvirt.c: Likewise.
(virDomainOpenGraphics): Use correct error for unsupported feature.
Signed-off-by: Eric Blake <eblake@redhat.com>
Having one API call into another is generally not good; among
other issues, it gives confusing logs, and is not quite as
efficient.
This fixes several instances, but not all: we still have instances
in both libvirt.c and in backend hypervisors (lxc and qemu) calling
the public virTypedParamsGetString and friends, which dispatch
errors immediately. I'm not sure if it is worth trying to clean
that up in a separate patch (such a cleanup may be easiest by
separating the public function into a wrapper around the internal,
then tweaking internal.h so that internal users directly use the
internal function).
* src/libvirt.c (virDomainGetUUIDString, virNetworkGetUUIDString)
(virStoragePoolGetUUIDString, virSecretGetUUIDString)
(virNWFilterGetUUIDString): Avoid nested public API call.
* src/util/virtypedparam.c (virTypedParamsReplaceString): Don't
dispatch errors here.
(virTypedParamsGet): No need to reset errors.
(virTypedParamsGetBoolean): Use consistent ordering.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1036248
Incorrect usage of virAsprintf. vmware-vmx reports version
information to stderr, at least for OS X 10.9.1.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any file with access to object_event_private.h also has access to
the internals of virObjectEvent, without needing an accessor
function. Not to mention the accessor function was doing type
checks that would always succeed.
* src/conf/object_event_private.h (virObjectEventGetEventID): Drop.
* src/conf/object_event.c (virObjectEventGetEventID): Drop.
(virObjectEventDispatchMatchCallback): Simplify caller.
* src/conf/domain_event.c (virDomainEventDispatchDefaultFunc):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
While working on events, I found a number of minor issues; I'm
hoisting these to the front rather than doing it piecemeal in
the patches where I first noticed bad or missing documentation.
* src/conf/object_event.c: Fix grammar, document all parameters
of public functions, wrap some long lines.
* src/conf/object_event.h: Likewise.
* src/conf/network_event.c: Likewise.
* src/conf/domain_event.c: Likewise (except for the large number
of event creation functions).
* src/libvirt_private.cyms (conf/object_event.h): Split...
(conf/network_event.h): ...to account for new file.
Signed-off-by: Eric Blake <eblake@redhat.com>
We document that calling any public API wipes out all prior
libvirt errors in the same thread; but weren't obeying this
style in a few functions.
There are a couple of nested uses of virConnectRef (in lxc
and qemu reboot paths), but they should not be affected by
this change in semantics since there should not be any
previous error getting nuked (a later patch will clean up
the nested calls, along with abuse of virConnectClose on
cleanup paths which DOES nuke errors).
* src/libvirt.c (virGetVersion, virConnectRef, virDomainRef)
(virDomainGetSecurityLabel, virDomainGetSecurityLabelList)
(virDomainSetMetadata, virDomainGetMetadata)
(virNodeGetSecurityModel, virNetworkRef, virInterfaceRef)
(virStoragePoolRef, virStorageVolRef, virNodeDeviceGetName)
(virNodeDeviceRef, virSecretRef, virStreamRef, virNWFilterRef)
(virDomainSnapshotRef): Reset error on entrance.
(do_open): Drop redundant error reset.
* src/libvirt-qemu.c (virDomainQemuAgentCommand): Likewise.
* src/libvirt-lxc.c (virDomainLxcEnterNamespace)
(virDomainLxcEnterSecurityLabel): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
While auditing error messages in libvirt.c, I found a couple
instances that had not been converted to modern error styles,
and a few places that failed to dispatch the error through
the known-good connection.
* src/libvirt.c (virDomainPinEmulator, virDomainGetDiskErrors)
(virDomainSendKey, virDomainGetSecurityLabelList)
(virDomainGetEmulatorPinInfo): Use typical error reporting.
(virConnectGetCPUModelNames, virConnectRegisterCloseCallback)
(virConnectUnregisterCloseCallback, virDomainGetUUID): Report
error through connection.
Signed-off-by: Eric Blake <eblake@redhat.com>
Style only. In particular, the message on "flags 'affect live'
and 'affect config'" being mutually exclusive was already split
in some instances.
* src/libvirt.c: Wrap some long error messages to fit in 80 columns.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our public APIs emit a debug log on entry, prior to anything
else. There were a few exceptions where obvious failures were not
logged, so fix those. When moving a debug earlier, this patch also
makes sure to avoid any NULL dereference during the log (the APIs
are supposed to gracefully fail if the user passes NULL for the object).
However, do NOT use VIR_DEBUG prior to virInitialize, since setting
up the error reporting can change where VIR_DEBUG output would be
routed. Instead add documentation to virGlobalInit, virInitialize,
and virGetVersion that better explains initialization.
* src/libvirt.c (virGetVersion, virConnectRef, virDomainRef)
(virNetworkRef, virInterfaceRef, virStoragePoolRef)
(virStorageVolRef, virNodeDeviceRef, virSecretRef, virStreamRef)
(virNWFilterRef, virDomainSnapshotRef): Debug on function entry.
* src/libvirt-lxc.c (virDomainLxcEnterNamespace)
(virDomainLxcEnterSecurityLabel): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed that the virDomainQemuMonitorCommand debug output wasn't
telling me the name of the domain it was working on. While it was
easy enough to determine which pointer matches the domain based on
other log messages, it is nicer to be consistent.
* src/util/viruuid.h (VIR_UUID_DEBUG): Moved here from...
* src/libvirt.c (VIR_UUID_DEBUG): ...here.
(VIR_ARG15, VIR_HAS_COMMA, VIR_DOMAIN_DEBUG_EXPAND)
(VIR_DOMAIN_DEBUG_PASTE, VIR_DOMAIN_DEBUG_0, VIR_DOMAIN_DEBUG_1)
(VIR_DOMAIN_DEBUG_2, VIR_DOMAIN_DEBUG): Move...
* src/datatypes.h: ...here.
* src/libvirt-qemu.c (virDomainQemuMonitorCommand)
(virDomainQemuAgentCommand): Better debug messages.
* src/libvirt-lxc.c (virDomainLxcOpenNamespace): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Preliminary cleanups to make search-and-replace easier in later
patches. Many of these were done by grepping for (multiline)
pattern violations, then bundled all into one patch.
* src/libvirt.c: Uniform two spaces between functions, return
type and open brace on separate line, avoid blank lines around
open brace, label in column 1, drop redundant (), consistent
indentation for function headers split across lines.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since libvirt 0.9.3, the entire virevent.c file has been a public
API, so improve the documentation in this file. Also, fix a
potential core dump - it could only be triggered by bogus use of
the API and would only affect the caller (not libvirtd), but we
might as well be nice.
* src/libvirt.c (virConnectSetKeepAlive)
(virConnectDomainEventRegister, virConnectDomainEventRegisterAny)
(virConnectNetworkEventRegisterAny): Document event loop requirement.
* src/util/virevent.c (virEventAddHandle, virEventRemoveHandle)
(virEventAddTimeout, virEventRemoveTimeout): Likewise.
(virEventUpdateHandle, virEventUpdateTimeout): Likewise, and avoid
core dump if caller didn't register handler.
(virEventRunDefaultImpl): Expand example, and set up code block in
html docs.
(virEventRegisterImpl, virEventRegisterDefaultImpl): Document more
on the use of the event loop.
Signed-off-by: Eric Blake <eblake@redhat.com>
Prior to this patch, an attempt to register an event without an
event loop started results in the vague:
libvirt: Remote Driver error : adding cb to list
Now it gives the much nicer:
libvirt: error : internal error: could not initialize domain event timer
This also avoids hiding other reasonable error messages, such as
attempts to register a duplicate callback or OOM errors.
* src/remote/remote_driver.c (remoteConnectNetworkEventRegisterAny)
(remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Preserve more detailed error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit eb70ceb tried to create a code block for
libvirt-libvirt.html#virConnectGetType, but failed to note
that our doc generator treats everything after "Returns" as
part of the return description rather than looking for
paragraph and code layout. Fix some other API that also had
generic details crammed into the return type paragraph.
* src/libvirt.c (virConnectOpen, virConnectOpenReadOnly)
(virConnectOpenAuth, virConnectListAllDomains): Fit doc pattern.
Signed-off-by: Eric Blake <eblake@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1046337
The <driver> name attribute of an interface is interpreted in two
different ways depending on the <interface> type - if the interface is
type='hostdev', then the driver name describes which backend to use
for the hostdev device assignment (vfio or kvm), but if the interface
is any emulated type *and* the model type is "virtio", then the driver
name can be "vhost" or "qemu", telling which backend qemu should use
to communicate with the emulated device.
The problem comes when someone has defined a an interface like this
(which is accepted by the parser as long as no <driver name='xxx'/> is
specified):
<interface type='hostdev'>
...
<model type='virtio'/>
...
</interface>
As libvirt storing this definition in the domain's status, the driver
name is automatically filled in with the backend that was
automatically decided by libvirt, so it stores this in the status:
<interface type='hostdev'>
...
<driver name='vfio'/>
...
<model type='virtio'/>
...
</interface>
This isn't noticed until the next time libvirtd is restarted - as it
is reading the status of all domains, it encounters the above
interface definition, logs an error:
internal error: Unknown interface <driver name='vfio'> has been specified
and fails to reload the domain status, so the domain is marked as
inactive.
The solution is to stop the parser from interpreting <driver>
attributes as if the device was an emulated virtio device, when it is
actually a hostdev.
(Although the bug has existed since vfio support was added, it has
just recently become more apparent because libvirt previously didn't
automatically set the driver name for hostdev interfaces in the domain
status to vfio/kvm as it does since commit f094aa, first appearing in
v1.1.4.)
Similar to commit 52dbeac, we should indent code snippets in
other places to ensure they appear correctly in html. See
http://libvirt.org/html/libvirt-libvirt.html#virNodeGetCPUStats
for an example improved by this patch. Also fix some missing
semicolons in the examples.
* src/libvirt.c: Indent code samples in comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1044806
Currently, sending the ANSI_A keycode from os_x codepage doesn't work as
it has a special value of 0x0. Our internal code handles that no
different to other not defined keycodes. Hence, in order to allow it we
must change all the undefined keycodes from 0 to -1 and adapt some code
too.
# virsh send-key guestname --codeset os_x ANSI_A
error: invalid keycode: 'ANSI_A'
# virsh send-key guestname --codeset os_x ANSI_B
# virsh send-key guestname --codeset os_x ANSI_C
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the @flags usage is a bit unclear at first sight to say the
least. There's no need for such unclear code especially when we can
borrow the working code from qemuDomainShutdownFlags().
In addition, this fixes one bug too. If user requested both
VIR_DOMAIN_SHUTDOWN_INITCTL and VIR_DOMAIN_SHUTDOWN_SIGNAL at the same
time, he is basically saying: 'Use the force Luke! If initctl fails try
sending a signal.' But with the current code we don't do that. If
initctl fails for some reason (e.g. inability to write to /dev/initctl)
we don't try sending any signal but fail immediately. To make things
worse, making a domain shutdown with bare _SIGNAL was working by blind
chance of a @rc variable being placed at correct place on the stack so
its initial value was zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=956994
Currently, it is possible to start an interface that is already running:
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
# virsh iface-start eth2
Interface eth2 started
# echo $?
0
Same applies for destroying a dead interface. We should not allow such
state transitions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By actually removing the <vcpupin> element (from within the
<cputune> section) from the XML, rather than jus update it with
a fully set vcpu affinity mask.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
And use it to implement libxlDomainPinVcpu(), similarly to what
happens in the QEMU driver. This way, it is possible to both
query and change the vcpu affinity of a persistent but not
running domain.
In face, before this patch, we have:
# virsh list --all
Id Name State
----------------------------------------------------
5 debian_32 running
- fedora20_64 shut off
# virsh vcpupin fedora20_64 0 2-4 --current
error: this function is not supported by the connection driver: virDomainPinVcpuFlags
After (same situation as above):
# virsh vcpupin fedora20_64 0 2-4 --current
# virsh vcpupin fedora20_64 0
VCPU: CPU Affinity
----------------------------------
0: 2-4
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
So that it is possible to query vcpu related information of
a persistent but not running domain, like it is for the QEMU
driver.
In fact, before this patch, we have:
# virsh list --all
Id Name State
----------------------------------------------------
5 debian_32 running
- fedora20_64 shut off
# virsh vcpuinfo fedora20_64
error: this function is not supported by the connection driver: virDomainGetVcpuPinInfo
After (same situation as above, i.e., fedora20_64 not running):
# virsh vcpuinfo fedora20_64
VCPU: 0
CPU: N/A
State: N/A
CPU time N/A
CPU Affinity: yyyyyyyy
VCPU: 1
CPU: N/A
State: N/A
CPU time N/A
CPU Affinity: yyyyyyyy
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1045002
If a domain has an <interface type='hostdev'> or an <interface
type='network'> where the network itself is a pool of hostdev devices,
then libvirt will internally keep that device on both the interface
list *and* the hostdev list for the domain. One of the places this
comes in handy is when a new device is being added and libvirt wants
to find a unique "alias" name for it - it just scans through the
hostdev array and makes sure it picks a name that doesn't match the
alias of any device in that array.
However, when libvirtd was restarted, if there was an <interface
type='network'> with the network being a hostdev pool, the device
would not be added to the reconstructed internal hostdev array, so its
alias would not be found during a scan of the hostdev array, thus
attempts to add a new hostdev (or <interface type='hostdev'> or
<interface type='network'>) would result in a message like this:
internal error: unable to execute QEMU command 'device_add':
Duplicate ID 'hostdev0' for device
This patch simply fixes the existing code in the domain XML parser
that fixes up the hostdev array in the case of <interface
type='hostdev'> to do the same thing in the case of <interface
type='network'> with a hostdev network.
This bug has existed since the very first addition of hostdev networks
to libvirt (0.10.0).
This eliminates the misleading error message that was being logged
when a vfio hostdev hotplug failed:
error: unable to set user and group to '107:107' on '/dev/vfio/22':
No such file or directory
as documented in:
https://bugzilla.redhat.com/show_bug.cgi?id=1035490
Commit ee414b5d (pushed as a fix for Bug 1016511 and part of Bug
1025108) replaced the single call to
virSecurityManagerSetHostdevLabel() in qemuDomainAttachHostDevice()
with individual calls to that same function in each
device-type-specific attach function (for PCI, USB, and SCSI). It also
added a corresponding call to virSecurityManagerRestoreHostdevLabel()
in the error handling of the device-type-specific functions, but
forgot to remove the common call to that from
qemuDomainAttachHostDevice() - this resulted in a duplicate call to
virSecurityManagerRestoreHostdevLabel(), with the second occurrence
being after (e.g.) a PCI device has already been re-attached to the
host driver, thus destroying some of the device nodes / links that we
then attempted to re-label (e.f. /dev/vfio/22) and generating an error
log that obscured the original error.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035490
virProcessSetMaxMemLock() (which is a wrapper over prlimit(3)) expects
the memory size in bytes, but libvirt's domain definition (which was
being used by qemuDomainAttachHostPciDevice()) stores all memory
tuning parameters in KiB. This was being accounted for when setting
MaxMemLock at domain startup time (so cold-plugged devices would
work), but not for hotplug.
This patch simplifies the few lines that call
virProcessSetMemMaxLock(), and multiply the amount * 1024 so that
we're locking the correct amount of memory.
What remains a mystery to me is why hot-plug of a managed='no' device
would succeed (at least on my system) while managed='yes' would
fail. I guess in one case the memory was coincidentally already
resident and in the other it wasn't.
there is a segfault in libxl logging in libxl_ctx_free when domain
create fail. because the log output handler vmessage is freed by
xtl_logger_destroy before libxl_ctx_free in virDomainObjListRemove.
move xtl_logger_destroy after libxl_ctx_free could fix this bug.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
by, in libxlDomainGetNumaParameters(), calling libxl_bitmap_init() as soon as
possible, which avoids getting to 'cleanup:', where libxl_bitmap_dispose()
happens, without having initialized the nodemap, and hence crashing after some
invalid free()-s:
# ./daemon/libvirtd -v
*** Error in `/home/xen/libvirt.git/daemon/.libs/lt-libvirtd': munmap_chunk(): invalid pointer: 0x00007fdd42592666 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7bbe7)[0x7fdd3f767be7]
/lib64/libxenlight.so.4.3(libxl_bitmap_dispose+0xd)[0x7fdd2c88c045]
/home/xen/libvirt.git/daemon/.libs/../../src/.libs/libvirt_driver_libxl.so(+0x12d26)[0x7fdd2caccd26]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virDomainGetNumaParameters+0x15c)[0x7fdd4247898c]
/home/xen/libvirt.git/daemon/.libs/lt-libvirtd(+0x1d9a2)[0x7fdd42ecc9a2]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(virNetServerProgramDispatch+0x3da)[0x7fdd424e9eaa]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0x1a6f38)[0x7fdd424e3f38]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa81e5)[0x7fdd423e51e5]
/home/xen/libvirt.git/src/.libs/libvirt.so.0(+0xa783e)[0x7fdd423e483e]
/lib64/libpthread.so.0(+0x7c53)[0x7fdd3febbc53]
/lib64/libc.so.6(clone+0x6d)[0x7fdd3f7e1dbd]
Signed-off-by: Dario Faggili <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain> --hard-limit 133T'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
#1 0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
at util/vircgroup.c:669
#2 0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
#3 0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
#4 0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
at util/vircgroup.c:1944
#5 0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
#6 0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
#7 0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
at remote_dispatch.h:7621
#8 0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
ret=0x7fffe40b84f0) at remote_dispatch.h:7591
#9 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:435
#10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:305
#11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
#12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain>'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
#1 0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
#2 0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
#3 0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
at util/vircgroup.c:1962
#4 0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
#5 0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
#6 0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote.c:1895
#7 0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote_dispatch.h:4050
#8 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:435
#9 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:305
#10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
#11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While looking at event code, I noticed that the documentation was
trying to refer me to functions that don't exist. Also fix some
typos and poor formatting.
* src/libvirt.c (virConnectDomainEventDeregister)
(virConnectDomainEventRegisterAny)
(virConnectDomainEventDeregisterAny)
(virConnectNetworkEventRegisterAny)
(virConnectNetworkEventDeregisterAny): Link to correct function.
* include/libvirt.h.in (VIR_DOMAIN_EVENT_CALLBACK)
(VIR_NETWORK_EVENT_CALLBACK): Likewise.
(virDomainEventID, virConnectDomainEventGenericCallback)
(virNetworkEventID, virConnectNetworkEventGenericCallback):
Improve docs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 6cd60b6 was flat out broken - it tried to print into the
wrong variable. My testing was obviously too cursory (did the
name get a slash added?); valgrind would have caught the error.
Thankfully it didn't hit any release.
Reported by Peter Krempa.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Fix bogus code.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_WARNINGS_NO_CAST_ALIGN / VIR_WARNINGS_RESET should
not have any trailing ';' since they are pragmas. The use
of a ';' results in an empty statement which confuses CIL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code around so that the forward declaration isn't needed. Also
fix code style of the opening brace of the function by moving it to a
separate line.
Recent addition of the gluster pool type omitted fixing the virsh and
virConnectListAllStoragePool filters. A typecast of the converting
function in virsh showed that also the sheepdog pool was omitted in the
command parser.
This patch adds gluster pool filtering support and fixes virsh to
properly convert all supported storage pool types. The added typecast
should avoid doing such mistakes in the future.
Currently the virDBusAddWatch does
virEventAddHandle(fd, flags,
virDBusWatchCallback,
watch, NULL);
dbus_watch_set_data(watch, info, virDBusWatchFree);
Unfortunately this is racy - since the event loop is in a
different thread, the virDBusWatchCallback method may be
run before we get to calling dbus_watch_set_data. We must
reverse the order of these calls
See https://bugzilla.redhat.com/show_bug.cgi?id=885445
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Starting from commit 2e82c18c in Xen (will be included in Xen 4.4)
both libxl_get_max_cpus() and libxl_get_max_nodes() start returning
a proper libxl error code, in case of failure. This patch fixes
this in the libxl driver.
Note that, although it is now basically impossible for them to return
0, that would, theoretically, still be wrong. Also, checking that the
returned value is '<= 0' makes the code correct for both Xen 4.4 and
Xen 4.3 (and 4.2), and that is why we go for it (rather than
just '< 0').
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
On a system that is enforcing FIPS, most libraries honor the
current mode by default. Qemu, on the other hand, refused to
honor FIPS mode unless you add the '-enable-fips' command
line option; worse, this option is not discoverable via QMP,
and is only present on binaries built for Linux. So, if we
detect FIPS mode, then we unconditionally ask for FIPS; either
qemu is new enough to have the option and then correctly
cripple insecure VNC passwords, or it is so old that we are
correctly avoiding a FIPS violation by preventing qemu from
starting. Meanwhile, if we don't detect FIPS mode, then
omitting the argument is safe whether the qemu has the option
(but it would do nothing because FIPS is disabled) or whether
qemu lacks the option (including in the case where we are not
running on Linux).
The testsuite was a bit interesting: we don't want our test
to depend on whether it is being run in FIPS mode, so I had
to tweak things to set the capability bit outside of our
normal interaction with capability parsing.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1035474
* src/qemu/qemu_capabilities.h (QEMU_CAPS_ENABLE_FIPS): New bit.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Conditionally
set capability according to detection of FIPS mode.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Use it.
* tests/qemucapabilitiestest.c (testQemuCaps): Conditionally set
capability to test expected output.
* tests/qemucapabilitiesdata/caps_1.2.2-1.caps: Update list.
* tests/qemucapabilitiesdata/caps_1.6.0-1.caps: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Systemd specified that any /dev/pts/NNN device on which it
is expected to spawn a agetty login, should be listed in
the 'container_ttys' env variable. It should just contain
the relative paths, eg 'pts/0' not '/dev/pts/0' and should
be space separated.
http://cgit.freedesktop.org/systemd/systemd/commit/?id=1d97ff7dd71902a5604c2fed8964925d54e09de9
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, 'vol-resize --allocate' allocates new space at the
vol->capacity offset. But the vol->capacity is not necessarily the same
as vol->allocation. For instance:.
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 1.00 GiB 1.00 GiB
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 2G
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 2.00 GiB 1.00 GiB
So, if we want to allocate more bytes, so the file is say 3G big, the
real allocated size is 2G actually:
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 3.00 GiB 2.00 GiB
This commit uses the correct vol->allocation instead of incorrect
vol->capacity, so the output of the commands above looks like this:
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 3.00 GiB 3.00 GiB
Moreover, if the '--alocate' flag was used, we must update the
vol->allocation member in storageVolResize API too, not just
vol->capacity.
Reported-by: Wang Sen <wangsen@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
