The 802.11 interfaces can not be moved by themselves, their Phy has to move too.
If there are other interfaces, they have to move too -- hopefully it's not too
confusing. This is a less-invasive alternative to defining a new hostdev type
for PHYs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Throughout the code, we have several places need to construct a path
somewhere in /sys/class/net/... They are not consistent and nearly
each code piece invents its own way how to do it. So unify this by:
1) use virNetDevSysfsFile() wherever possible
2) At least use common macro SYSFS_NET_DIR declared in virnetdev.h at
the rest of places which can't go with 1)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 49ed6cff is broken on mingw and other non-linux platforms:
CCLD libvirt.la
Cannot export virNetDevSysfsFile: symbol not defined
collect2: error: ld returned 1 exit status
* src/util/virnetdev.c: Provide virNetDevSysfsFile fallback.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add static virNetDevGetifaddrsAddress to attempt to get the interface
IP address. If getifaddrs is not supported, fall back to
virNetDevGetIPv4AddressIoctl to get the IP address.
This allows IPv6 addresses to be used for <listen type='network>
with device-backed networks.
https://bugzilla.redhat.com/show_bug.cgi?id=1192318
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Valgrind complained:
==3770== Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s)
==3770== at 0x919D407: ioctl (syscall-template.S:81)
==3770== by 0x530FE7E: rpl_ioctl (ioctl.c:42)
==3770== by 0x50CB433: virNetDevFeatureAvailable (virnetdev.c:2764)
==3770== by 0x50CB6A7: virNetDevGetFeatures (virnetdev.c:2830)
==3770== by 0x1F0E5347: udevProcessNetworkInterface (node_device_udev.c:722)
==3770== by 0x1F0E689F: udevGetDeviceDetails (node_device_udev.c:1300)
==3770== by 0x1F0E6E06: udevAddOneDevice (node_device_udev.c:1422)
==3770== by 0x1F0E6FB8: udevProcessDeviceListEntry (node_device_udev.c:1464)
==3770== by 0x1F0E70CF: udevEnumerateDevices (node_device_udev.c:1494)
==3770== by 0x1F0E7BB4: nodeStateInitialize (node_device_udev.c:1806)
==3770== by 0x51B4303: virStateInitialize (libvirt.c:777)
==3770== by 0x11DEE7: daemonRunStateInit (libvirtd.c:906)
==3770== Address 0x228e38d4 is on thread 12's stack
==3770== in frame #2, created by virNetDevFeatureAvailable (virnetdev.c:2750)
* src/util/virnetdev.c (virNetDevFeatureAvailable): Initialize all
bytes of ifr.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit c9027d8f added a detection of NIC HW features, but some of them
are not available in old kernel. Very old kernels lack enum
ethtool_flags and even if this enum is present, not all values are
available for all kernels. To be sure that we have everything in kernel
that we need, we must check for existence of most of that flags, because
only few of them were defined at first.
Also to successfully build libvirt with older kernel we need to include
<linux/types.h> before <linux/ethtool.h> to have __u32 and friends
defined.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit e562a61a introduced new function to get/set interface state but
there was misuse of ATTRIBUTE_NONNULL on non-pointer attributes and also
we need to wrap that functions by #ifdef to not break mingw build.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
e562a61a07 added these two new helper functions and only used them
within virnetdev.c, but declared them in the .h file. If some
currently unsupported interface flags need to be accessed in the
future, it will make more sense to write the appropriate higher level
function rather than require us to artificially define IFF_* on some
mythical platform that doesn't have SIOC[SG]IFFLAGS (and therefore
doesn't have IFF_*) just so we can call virNetDevSetIFFFlags() to
return an error.
To help someone in not going down the wrong road, this patch makes the
two helper functions static, hopefully making it less likely that
someone will want to use them outside of virnetdev.c.
This patch provides the utility functions needed to synchronize
the rxfilter changes made to a guest domain with the corresponding
macvtap devices on the host:
* Get/set PROMISC flag
* Get/set ALLMULTI, MULTICAST
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a default implementation of virNetDevSetIPv4Address using netlink
and libnl. This avoids requiring /usr/sbin/ip or /usr/sbin/ifconfig
external binaries.
This macro seems to be defined only on linux/unix and it fails during
mingw build. Its value is '16' (taken from net/if.h) so define it if
it's not defined.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently, build fails on FreeBSD because its struct ifreq does not
have ifr_hwaddr member. In order to fix that, check if this member
is present, otherwise fall back to the stub version of the
virNetDev{Add,Del}Multi functions.
The complaint is that if cleanup is called when virFileReadAll fails,
then mcast->entries is NULL and could be dereferenced in the clear
function. After following the code some - I saw that the caller to
the function (virNetDevGetMulticastTable) will also call
virNetDevMcastListClear if this function returns -1, so this
isn't necessary, so I removed the call.
Coverity complains that because the for loop is from 0 to 5 (max tokens)
and the impending switch/case statements used each of the #define values
that the 'default' wouldn't reachable. This patch will convert the #define's
into enum's and add the obligatory dead_error_begin marker for these type
situations.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This patch provides the utility functions to needed to synchronize the
changes made to a guest domain network device's multicast filter
with the corresponding macvtap device's filter on the host:
* Get/add/remove multicast MAC addresses
* Get the macvtap device's RX filter list
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
virNetDevLinkDump() gets a message from netlink into "resp", then
calls nlmsg_parse() to fill the table "tb" with pointers into resp. It
then returns tb to its caller, but not before freeing the buffer at
resp. That means that all the callers of virNetDevLinkDump() are
examining memory that has already been freed. This can be verified by
filling the buffer at resp with garbage prior to freeing it (or, I
suppose, just running libvirtd under valgrind) then performing some
operation that calls virNetDevLinkDump().
The code has been like this ever since virNetDevLinkDump() was written
- the original author didn't notice it, and neither did later
additional users of the function. It has only been pure luck (or maybe
a lack of heavy load, and/or maybe an allocation algorithm in malloc()
that delays re-use of just-freed memory) that has kept this from
causing errors, for example when configuring a PCI passthrough or
macvtap passthrough network interface.
The solution taken in this patch is the simplest - just return resp to
the caller along with tb, then have the caller free it after they are
finished using the data (pointers) in tb. I alternately could have
made a cleaner interface by creating a new struct that put tb and resp
together along with a vir*Free() function for it, but this function is
only used in a couple places, and I'm not sure there will be
additional new uses of virNetDevLinkDump(), so the value of adding a
new type, extra APIs, etc. is dubious.
This same structure will be used to retrieve RX filter info for
interfaces on the host via netlink messages, and RX filter info for
interfaces on the guest via the qemu "query-rx-filter" command.
Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
virFileReadAll already logs an error. If reading the 'speed' file
fails with EINVAL, we log an error even though we ignore it. If it
fails with other errors, we log two errors.
Use virFileReadAllQuiet - ignore EINVAL and report just one error
in other cases.
Fixes this error on libvirtd startup:
2014-06-30 12:47:14.583+0000: 20971: error : virFileReadAll:1297 :
Failed to read file '/sys/class/net/wlan0/speed': Invalid argument
The kernel's more broken than one would think. Various drivers report
various (usually spurious) values if the interface is in other state
than 'up' . While on some we experience -EINVAL when read()-ing the
speed sysfs file, with other drivers we might get anything from 0 to
UINT_MAX. If that's the case it's better to not report link speed.
Well, the interface is not up anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we're compiling on non-Linux platform, the virNetDevGetLinkInfo()
is a dummy function which barely logs debug message that getting link
info is not supported. However, while the debug message was prepared
for printing the interface name too, I actually forgot to pass the
variable which resulted in build error on platforms like mingw or
FreeBSD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The purpose of this function is to fetch link state
and link speed for given NIC name from the SYSFS.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Functions virNetDevRestoreMacAddress() and virNetDevRestoreMacAddress()
allocate memory for variable @path using virAsprintf(), but they
haven't freed that memory before returning out.
Signed-off-by: Zhang bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Various methods in virnetdev.c and virhostdev.c were missing
const-ness for several char * parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In order to make a client-only build successful on RHEL4 (yes, you
read that correctly!), commit 3ed2e54 modified src/util/virnetdev.c so
that the functional version of virNetDevGetVLanID() was only compiled
if GET_VLAN_VID_CMD was defined. However, it is *never* defined, but
is only an enum value, so the proper version was no longer compiled
even on platforms that support it. This resulted in the vlan tag not
being properly set for guest traffic on VEPA mode guest macvtap
interfaces that were bound to a vlan interface (that's the only place
that libvirt currently uses virNetDevGetVLanID)
Since there is no way to compile conditionally based on the presence
of an enum value, this patch modifies configure.ac to check for said
enum value with AC_CHECK_DECLS(), which #defines
HAVE_DECL_GET_VLAN_VID_CMD to 1 if it's successful compiling a test
program that uses GET_VLAN_VID_CMD (and still #defines it, but to 0,
if it's not successful). We can then make the compilation of
virNetDevGetVLanID() conditional on the value of
HAVE_DECL_GET_VLAN_VID_CMD.
When virAsprintf was changed from a function to a macro
reporting OOM error in dc6f2da, it was documented as returning
0 on success. This is incorrect, it returns the number of bytes
written as asprintf does.
Some of the functions were converted to use virAsprintf's return
value directly, changing the return value on success from 0 to >= 0.
For most of these, this is not a problem, but the change in
virPCIDriverDir breaks PCI passthrough.
The return value check in virhashtest pre-dates virAsprintf OOM
conversion.
vmwareMakePath seems to be unused.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=971325
The problem was that if virPCIGetVirtualFunctions was given the name
of a non-existent interface, it would return to its caller without
initializing the pointer to the array of virtual functions to NULL,
and the caller (virNetDevGetVirtualFunctions) would try to VIR_FREE()
the invalid pointer.
The final error message before the crash would be:
virPCIGetVirtualFunctions:2088 :
Failed to open dir '/sys/class/net/eth2/device':
No such file or directory
In this patch I move the initialization in virPCIGetVirtualFunctions()
to the begining of the function, and also do an explicit
initialization in virNetDevGetVirtualFunctions, just in case someone
in the future adds code into that function prior to the call to
virPCIGetVirtualFunctions.
