Commit Graph

75 Commits

Author SHA1 Message Date
Richard W.M. Jones
5090c576e3 Add a ./run script for running programs from the local directory.
With this script you can run libvirt programs without needing to
install them first.  You just have to do for example:

  ./run ./tools/virsh [args ...]

If you are already in the tools/ subdirectory, then the following
command will also work:

  ../run ./virsh [...]

You can also run the C programs under valgrind like this:

  ./run valgrind [valgrind opts...] ./program

or under gdb:

  ./run gdb --args ./program

This also works with sudo (eg. if you need root access for libvirt):

  sudo ./run ./tools/virsh list --all

Derived from libguestfs and simplified.  The ./run script in
libguestfs is much more sophisticated:

https://github.com/libguestfs/libguestfs/blob/master/run.in
2012-09-18 10:59:16 +01:00
Daniel P. Berrange
6a714d31d0 Switch automated builds to use Mingw64 toolchain instead of Mingw32
The Mingw32 toolchain is broadly obsoleted by the Mingw64 toolchain.
The latter has been adopted by Fedora 17 and newer. Maintaining a
RPM spec for Mingw32 is a needless burden, so switch to a Mingw64
RPM spec (which provides 32 & 64 bit builds).

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-06-25 10:41:10 +01:00
Eric Blake
ff81956ac6 maint: add missing copyright notices
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
2011-07-28 15:01:17 -06:00
Daniel Veillard
c7ac48c7d7 Re-add libvirt.spec to tarball to allwo "make rpm"
Commit e6972165 broke "make rpm" and rpmbuild -ta tarball
2011-05-09 14:23:19 +08:00
Eric Blake
e697216527 build: drop files generated by config.status from tarball
The rule of thumb is that any file generated by config.status
is a) reproducible by any user, b) dependent on configure options.
Therefore, it is inappropriate to include such generated files
in the tarball (for proof, Makefile is generated from Makefile.in;
the former is not in the tarball while the latter is).

* Makefile.am (EXTRA_DIST): Remove files covered by AC_OUTPUT.
2011-05-06 11:09:32 -06:00
Eric Blake
2d24037db0 build: nuke all .x-sc* files, and fix VPATH syntax-check
Not every day you see a patch that nukes 27 files!

* .gnulib: Update to latest, for maint.mk improvements
* bootstrap: Resync to gnulib.
* bootstrap.conf (ACLOCAL): Swap the secondary aclocal include
directory, now that bootstrap picks up gnulib/m4 instead of m4.
* Makefile.am (syntax_check_exceptions, EXTRA_DIST): No longer
worry about nuked files.
* cfg.mk (sc_x_sc_dist_check): Delete dead rule.
(VC_LIST_ALWAYS_EXCLUDE_REGEX): Add HACKING.
(exclude_file_name_regexp--sc_*): Inline and simplify contents...
* .x-sc_*: ...from here, then delete the files.
2011-03-23 15:51:32 -06:00
Eric Blake
fac97c65c1 build: distribute 'make syntax-check' tweaks
* Makefile.am (EXTRA_DIST): Distribute cfg.mk.
2011-02-09 12:34:32 -07:00
Eric Blake
030ce43b49 maint: reject raw close, popen in 'make syntax-check'
commit f1fe9671e was supposed to make sure we use files.h
macros to avoid double close, but it didn't work.

Meanwhile, virCommand is vastly superior to system(), fork(),
and popen() (also to virExec, but we haven't completed that
conversion), so enforce that, too.

* cfg.mk (sc_prohibit_close): Fix typo that excluded close, and
add pclose.
(sc_prohibit_fork_wrappers): New rule, for fork, system, and popen.
* .x-sc_prohibit_close: More exemptions.
* .x-sc_prohibit_fork_wrappers: New file.
* Makefile.am (syntax_check_exceptions): Ship new file.
* src/datatypes.c (virReleaseConnect): Tweak comment to avoid
false positive.
* src/util/files.h (VIR_CLOSE): Likewise.
2011-01-29 10:36:47 -07:00
Eric Blake
63dbc84a88 maint: improve sc_prohibit_strncmp syntax check
* .gnulib: Update, for sc_prohibit_strcmp fix.
* cfg.mk: Adjust copyright; the only FSF portions come from when
this file was copied from coreutils.
(sc_prohibit_strncmp): Copy bug-fixes from sc_prohibit_strcmp.
* .x-sc_prohibit_strcmp: Delete, now that rule is smarter.
* .x-sc_prohibit_strncmp: Likewise.
* Makefile.am (syntax_check_exceptions): Track deletion.
2011-01-14 15:39:05 -07:00
Eric Blake
416c09bcc0 maint: prohibit most uses of xmlGetProp
Making this change makes it easier to spot the memory leaks
that will be fixed in the next patch.

* cfg.mk (sc_prohibit_xmlGetProp): New rule.
* .x-sc_prohibit_xmlGetProp: New exception.
* Makefile.am (EXTRA_DIST): Ship exception file.
* tools/virsh.c (cmdDetachInterface, cmdDetachDisk): Adjust
offenders.
* src/conf/storage_conf.c (virStoragePoolDefParseSource):
Likewise.
* src/conf/network_conf.c (virNetworkDHCPRangeDefParseXML)
(virNetworkIPParseXML): Likewise.
2010-11-24 15:23:43 -07:00
Eric Blake
97cde147b5 maint: ensure syntax check exceptions are distributed
* Makefile.am (EXTRA_DIST): Factor exceptions files...
(syntax_check_excpetions): into new list.  Include recently added
exceptions.
* cfg.mk (sc_x_sc_dist_check): New check, copied from coreutils.
2010-11-24 15:23:43 -07:00
Eric Blake
f1fe9671e3 build: enforce files.h usage
* cfg.mk (sc_prohibit_close): New syntax-check rule.
* src/util/pci.c (pciWaitForDeviceCleanup): Fix violation.
* .x-sc_prohibit_close: New exceptions.
* Makefile.am (EXTRA_DIST): Distribute new file.
2010-11-24 15:23:43 -07:00
Eric Blake
d2af8ffcd8 maint: tighten strncmp syntax check
Using 'int ret = strcmp(a, b)' in a qsort function is a valid use of
str[n]cmp that should _not_ be turned to STREQ, but it was falling
foul of our specific syntax-check.  Meanwhile, gnulib's maint.mk
already has a tighter bound for strcmp, so we can copy that regex and
just check for strncmp, which results in fewer false positives that
require exceptions.

* cfg.mk (sc_prohibit_strcmp_and_strncmp): Rename...
(sc_prohibit_strncmp): ...to this, and tighten, to mirror
maint.mk's sc_prohibit_strcmp's better regex.
* Makefile.am (syntax_check_exceptions): Update exception rule.
* .x-sc_prohibit_strcmp_and_strncmp: Rename...
* .x-sc_prohibit_strncmp: ...and trim.
2010-11-18 12:21:58 -07:00
Eric Blake
e8aba782e7 maint: avoid remaining sprintf uses
* cfg.mk (sc_prohibit_sprintf): New rule.
(sc_prohibit_asprintf): Avoid false positives.
* docs/hacking.html.in (Printf-style functions): Document the
policy.
* HACKING: Regenerate.
* .x-sc_prohibit_sprintf: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* src/vbox/vbox_tmpl.c (vboxStartMachine, vboxAttachUSB): Use
virAsprintf instead.
* src/uml/uml_driver.c (umlOpenMonitor): Use snprintf instead.
* tools/virsh.c (cmdDetachInterface): Likewise.
* src/security/security_selinux.c (SELinuxGenSecurityLabel):
Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineCmd): Likewise,
and ensure large enough buffer.
2010-11-17 10:13:12 -07:00
Eric Blake
144c06d4ee maint: update to latest gnulib
Allows bootstrap to work on FreeBSD, where gzip doesn't have a '.'
in its version; and silences false positives in the new
'make syntax-check' rule.

* .gnulib: Update to latest.
* bootstrap: Synchronize to upstream.
* .x-sc_bindtextdomain: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* .gitignore: Regenerate per latest bootstrap, anchor entries that
are only in the root directory, and consolidate entries from other
generated .gitignore files.
* build-aux/.gitignore, m4/.gitignore, po/.gitignore: Remove from
version control, since bootstrap generates them.
2010-11-17 10:13:12 -07:00
Matthias Bolte
34ed4e9809 Generate HACKING from docs/hacking.html.in 2010-11-12 19:47:20 +01:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Eric Blake
1987b09093 maint: fix syntax-check failure of previous patch
* cfg.mk (sc_prohibit_trailing_blank_lines): Delete; this is
adequately covered by maint.mk's sc_prohibit_empty_lines_at_EOF.
* .x-sc_prohibit_empty_lines_at_EOF: New file, to exempt raw
patches.
* Makefile.am (EXTRA_DIST): Include new exemption.
2010-10-26 15:50:19 -06:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Eric Blake
e7064aa6a2 build: restore operation of bit-rotted 'make cov'
'./autobuild.sh' with lcov installed discovered that our
coverage support has been bit-rotting for a while.  This
restores it back to a successful state, although I have
not yet spent any time looking through the resulting files to
look for low-hanging fruit in the unit test coverage front.

* configure.ac: Clear COMPILER_FLAGS at right place.
* Makefile.am (cov): Newer genhtml no longer likes plain -s.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Don't AC_SUBST
COMPILER_FLAGS; it is a shell variable for use in configure only.
* src/Makefile.am (AM_CFLAGS, AM_LDFLAGS): New variables, to make
it easier to provide global flag additions.  Use throughout, to
uniformly apply coverage flags.
* .gitignore: Globally ignore gcov output.
* daemon/.gitignore: Simplify.
* src/.gitignore: Likewise.
* tests/.gitignore: Likewise.
2010-07-29 13:41:25 -06:00
Matthias Bolte
9af989fabc Add openauth example to demonstrate a custom auth callback 2010-07-13 13:50:27 +02:00
Eric Blake
babaae9256 build: fix syntax-check problems
* .x-sc_prohibit_gettext_noop: Add new exemption.
* .x-sc_prohibit_test_minus_ao: Likewise.
* Makefile.am (EXTRA_DIST): Distribute new files.
* .gitignore: Ignore built file.
2010-04-12 16:43:05 -06:00
Stefan Berger
e3a7137ac2 Add some examples filters
This patch adds some example filters to libvirt. They are automatically
installed into the proper directory for libvirt to pick them up.
2010-03-26 18:01:17 +00:00
Jim Meyering
083b901eb3 build: avoid non-srcdir "make distcheck" failures (srcdir vs wildcard)
* tests/xencapsdata/Makefile.am: Use $(wildcard in $(srcdir)-aware manner
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am (EXTRA_DIST): Likewise.
* Makefile.am (XML_EXAMPLES): Use $(wildcard in $(srcdir)-aware manner.
2010-02-25 10:50:18 +01:00
Jamie Strandboge
ad905a195e add AppArmor test and examples to dist
tests/virt-aa-helper-test and examples/apparmor are not included in
official tarballs, but should be. Attached is a patch to fix that
which works when apparmor is and is not available.
2009-12-14 13:40:42 +01:00
Chris Lalancette
d27098c054 Add a new syntax-check rule for gethostname.
We should always be using virGetHostname in place of
gethostname; thus add in a new syntax-check rule to make
sure no new uses creep in.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-10-26 10:34:27 +01:00
Chris Lalancette
4c893ef9be Various syntax-check fixes.
Make a pass over the syntax-check files, tightening up regex's,
un-ignoring certain files, and cleaning things up.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-10-26 10:34:05 +01:00
Daniel P. Berrange
35b5f84c50 Remove some auto-generated files
Removes some auto-generated files still under version control.
It also moves the rule for generating NEWS into the Makefile.am
that's in the same directory as the output file to avoid confusion

* docs/libvirt-api.xml, docs/libvirt-refs.xml, NEWS: Remove
  auto-generated files from source control
* Makefile.am: Add rule for generating NEWS file
* docs/Makefile.am: Remove rule for generating NEWS file
2009-10-09 13:01:22 +01:00
Daniel Veillard
553f31c579 Fix a few 'make rpm' breakages
* Makefile.am: examples/domain-events/events-python should be added
  to dist tarball
* libvirt.spec.in: there is no makefile in domain-events but in
  domain-events/events-c and python/libvirtclass.txt has vanished
2009-09-30 16:20:25 +02:00
Daniel P. Berrange
13f59ad733 Move example XML files into examples/xml
* docs/storage/: Move to examples/xml/storage/
* docs/test*.xml: Move to examples/xml/test/
* docs/Makefile.am: Remove example XML files from dist
* Makefile.am: Add examples/xml to EXTRA_DIST
* tests/virshtest.c: Update for moved test XML
* libvirt.spec.in: Include example XML files as docs
* tests/int-overflow: UPdate for moved XML
2009-09-21 14:41:48 +01:00
Daniel P. Berrange
cebeba7bd7 Move docs/examples into examples/
* Makefile.am: Add examples/dominfo examples/domsuspend examples/python
  as SUBDIRS
* configure.in: Update AC_OUTPUT for new/old Makefiles
* docs/Makefile.am: Remove examples from SUBDIRS
* docs/examples/info1.c: Move to examples/dominfo/info1.c
* docs/examples/suspend.c: Move to examples/domsuspend/suspend.c
* docs/examples: Remove all remaining files
* docs/examples/python: Moved to examples/python/
* examples/dominfo/Makefile.am, examples/domsuspend/Makefile.am: New
  build files
* libvirt.spec.in: Update to take account of moved examples
2009-09-21 14:41:46 +01:00
Daniel P. Berrange
7ff256ec98 Move virsh into tools/ directory
Move the virsh tool and its man page into the tools directory

* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
  src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
  virsh location
2009-09-21 14:41:45 +01:00
Daniel P. Berrange
5c2a1ae876 Rename qemud/ directory to daemon/
* qemud/: Rename to daemon/
* Makefile.am, configure.in, src/Makefile.am, src/remote_internal.c,
  tests/Makefile.am, tests/eventtest.c: s/qemud/daemon/ where needed
2009-09-21 14:41:42 +01:00
Jim Meyering
f272378d52 build: automatically rerun ./bootstrap when needed
When "git pull" (or any other operation) brings in a new version of the
gnulib git submodule, you must rerun the autogen.sh script.  With this
change, "make" now fails and tells you to run ./autogen.sh, when needed.
* autogen.sh: Maintain a new file, .git-module-status, containing
the current submodule status.  If it doesn't exist or its content
is different from what "git submodule status" prints, then run
./bootstrap
* .gitignore: Add .git-module-status
* cfg.mk: Diagnose out of date submodule and fail.
* README-hacking: Update not to mention bootstrap.
* Makefile.am (MAINTAINERCLEANFILES): Add .git-module-status,
so that "make maintainerclean" will remove it.
2009-07-10 13:39:28 +02:00
Daniel P. Berrange
75618aaf88 Fix wierd build problems due to autopoint overwriting gnulib m4
* Makefile.am: List -I m4 first, in ACLOCAL_AMFLAGS
* .gitignore: ignore gnulib/, ChangeLog, *rej, *orig, *#*# (emacs
  temporary files)
2009-07-09 12:18:14 +01:00
Jim Meyering
2d9bf021a1 build: adjust aclocal's search patch to prefer gnulib's m4 files.
* Makefile.am (ACLOCAL_AMFLAGS): Search gnulib/m4/ before m4/.
2009-07-08 21:27:41 +02:00
Jim Meyering
27b175b9a2 generate ChangeLog from git logs into distribution tarball
No longer maintain a version-controlled ChangeLog file, but do
continue to include a ChangeLog file in distribution tarball.
* Makefile.am (gen-ChangeLog): New rule.
(dist-hook): Depend on it.
(EXTRA_DIST): Add ChangeLog-old.
* bootstrap (modules): Add gitlog-to-changelog.
* ChangeLog: Remove file.  Renamed to...
* ChangeLog-old: ...this.  New file.
* autogen.sh: Touch ChangeLog, to ensure it exists.  For automake.
2009-07-08 16:17:51 +02:00
Jim Meyering
c120fcc06a Prepare to use maint.mk from gnulib
Since Makefile.maint will soon come from gnulib's maint.mk,
sync Makefile.maint to have the same contents (modulo minor
things).  In syncing it, we have to remove some libvirt-specific
rules.  Since we want to keep them (of course), put those in cfg.mk.
* Makefile.maint: Merge from gnulib's maint.mk.
* cfg.mk (sc_avoid_write): New rule.  From Makefile.cfg.
(sc_prohibit_strcmp_and_strncmp): Likewise, and rename.
(sc_prohibit_asprintf, sc_prohibit_VIR_ERR_NO_MEMORY): Likewise.
(sc_prohibit_nonreentrant): Likewise.
(sc_prohibit_ctype_h): Likewise.
(sc_TAB_in_indentation, sc_avoid_ctype_macros): Likewise.
(sc_prohibit_virBufferAdd_with_string_literal): Likewise.
(sc_prohibit_gethostby): Likewise.
(sc_libvirt_unmarked_diagnostics): Likewise.  Also, rename the
rule, inserting "_libvirt", since this rule is a specialization of
the one in gnulib.
* GNUmakefile: Include cfg.mk, not Makefile.cfg
* .x-sc_prohibit_strcmp_and_strncmp: New file.
* Makefile.am (EXTRA_DIST): Add .x-sc_prohibit_strcmp_and_strncmp
2009-07-08 16:17:51 +02:00
Jim Meyering
b731d7830e use automake-1.11's silent-rules option, when possible
Don't use mylibtool, (subsumed by automake's silent rules)
Its use was causing a non-srcdir build to fail.
* Makefile.am (EXTRA_DIST): Remove mylibtool.
* configure.in: Don't use mylibtool.

* configure.in: Use AM_SILENT_RULES([yes]),
but only if that m4 macro is defined.
Thus, it works even on systems that lack automake-1.11.
Daniel Berrange suggested adding the conditional, so that
we don't have a hard requirement on 1.11, e.g., for RHEL5.
2009-07-08 16:15:46 +02:00
Cole Robinson
b8893d0277 Fix rpm build: add 'mylibtool' to EXTRADIST. 2009-05-19 13:23:07 +00:00
Daniel P. Berrange
fa4126087b Add tool for validating XML & fix misc bugs in virsh POD docs 2009-04-19 15:10:45 +00:00
Daniel Veillard
66780313c2 New example program
* Makefile.am configure.in examples/hellolibvirt/Makefile.am
  examples/hellolibvirt/hellolibvirt.c: new trivial example program
  by David Allan
Daniel
2009-02-26 16:14:50 +00:00
Daniel P. Berrange
071be08079 Add syntax check rule to look for non-reentrant POSIX apis 2009-01-20 20:19:55 +00:00
Jim Meyering
4cea12bb69 enforce the "include <config.h> first" rule
* qemud/Makefile.am: Ensure that the generated remote_protocol.c
includes <config.h> first.
* Makefile.maint (sc_require_config_h_first): New rule, so that
"make syntax-check" enforces this.
* .x-sc_require_config_h_first: New file.
* Makefile.am (.x-sc_require_config_h_first): Add it.
* qemud/remote_protocol.x: Don't include <config.h> here.
* qemud/remote_protocol.c: Regenerate.
2008-12-17 17:23:21 +00:00
Daniel Veillard
1509b8027f Massive patch adding event APIs by Ben Guthro
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
  src/libvirt.c src/libvirt_sym.version: new libvirt event entry
  points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
  src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
  src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
  src/remote_internal.c src/storage_backend_fs.c src/test.c
  qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
  qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
  qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
  qemud/remote_protocol.c qemud/remote_protocol.h
  qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
  Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
  docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
  examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
2008-10-23 13:18:18 +00:00
Richard W.M. Jones
0ae26314b3 Updated MinGW spec file.
* .cvsignore, Makefile.am, autobuild.sh, configure.in,
	  mingw32-libvirt.spec.in: Import the latest MinGW libvirt spec
	  file.  Note that the file has been renamed to conform to
	  new Fedora packaging guidelines.
	* autobuild.sh: Fix a bug in the generation of the $EXTRA_RELEASE
	  field when autobuilding.
2008-10-10 11:33:10 +00:00
Daniel Veillard
9d3d43436e * configure.in libvirt.spec.in docs/*: preparing release of
libvirt-0.4.5
* po/*: rebuilt and updated de.po
daniel
2008-09-08 14:32:18 +00:00
Daniel P. Berrange
542039fab0 Fully support mingw builds 2008-09-05 12:03:45 +00:00
Daniel Veillard
a48f26c718 adding autogen.sh to EXTRA_DIST
* Makefile.am: adding autogen.sh to EXTRA_DIST
Daniel
2008-06-13 09:08:44 +00:00
Daniel P. Berrange
aa2bb9c88c Switch to using lcov for code coverage repots 2008-05-29 19:27:04 +00:00