Commit 7068b56c introduced several hyperv features. Not all hyperv
features are supported by old enough kernels and we shouldn't allow to
start a guest if kernel doesn't support any of the hyperv feature.
There is one exception, for backward compatibility we cannot error out
if one of the RELAXED, VAPIC or SPINLOCKS isn't supported, for the same
reason we ignore invtsc, to not break restoring saved domains with older
libvirt.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This check is there to allow restore saved domain with older libvirt
where we included invtsc by default for host-passthrough model. Don't
skip the whole function, but only the part that checks for invtsc.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since commit v1.3.2-119-g1e34a8f which enabled debug-threads in QEMU
qemuGetProcessInfo would fail to parse stats for any thread with a space
in its name.
https://bugzilla.redhat.com/show_bug.cgi?id=1316803
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemu won't ever add those functions directly to QMP. They will be
replaced with 'blockdev-add' and 'blockdev-del' eventually. At this time
there's no need to keep the stubs around.
Additionally the drive_del stub in JSON contained dead code in the
attempt to report errors. (VIR_ERR_OPERATION_UNSUPPORTED was never
reported). Since the text impl does have the same message it is reported
anyways.
This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.
- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.
- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.
- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.
- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events
- Hyper-V "reset" allows guest to reset VM.
- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a user specify network type ethernet, then create it via libvirt and run
script if it provided. After this commit user does not need to
run external script to create tap device or add root permissions to qemu
process.
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
This will skip few steps from qemuProcessStart in order to create only
qemu CMD. Use a VIR_QEMU_PROCESS_START_PRETEND for all the qemuProcess*
functions called by this one to not modify or check host.
This new function will be used later on for XMLToNative API and also for
qemuxml2argvtest to make sure that both API and test uses the same code
as qemuProcessStart.
We need also update qemuProcessInit to wrap few lines of code with check
that VIR_QEMU_PROCESS_START_PRETEND that makes sense only for
qemuProcessStart.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that checks host and domain. Do not check host if we use
VIR_QEMU_PROCESS_START_PRETEND flag.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that modifies only live XML to this function. The new
VIR_QEMU_PROCESS_START_PRETEND flag will be used by qemuXMLToNative and
qemuxml2argvtest later in order to reuse the same code as
qemuProcessStart uses.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The postParse callback is the correct place to generate default values
that should be present in offline XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
QEMU changed the error message to:
"Tray of device 'drive-sata0-0-1' is not open"
and they may change the error massage in the future.
This updates the code to not depend on the text from the error message
but only on error itself.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The function already takes two bool arguments, switching to flags makes
it a lot easier to read. Especially in case we need to add another
boolean in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In post-copy mode none of the hosts has a complete guest state and
rolling back migration is impossible. Thus aborting it would be
equivalent to destroying the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When migration fails in the post-copy mode, it's impossible to just kill
the destination domain and resume the source since the source no longer
contains current guest state. Let's mark domains on both sides as
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED to let the upper layer decide what to
do with them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destination libvirtd is restarted during migration in Finish phase
just after the point we started guest CPUs, we should not kill the
domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Migration enters "postcopy-active" state after QEMU switches to
post-copy and pauses guest CPUs. From libvirt's point of view this state
is similar to "completed" because we need to transfer guest execution to
the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If a <graphics type='spice'> has no port nor tlsPort set, the generated
QEMU command line will contain -spice port=0.
This is later going to be ignored by spice-server, but it's better not
to add it at all in this situation.
As an empty -spice is not allowed, we still need to append port=0 if we
did not add any other argument.
The end goal is to avoid adding -spice port=0,addr=127.0.0.1 to QEMU command
line when no SPICE port is specified in libvirt XML.
Currently, the code relies on port=xx to always be present, so subsequent
args can be unconditionally appended with a leading ','. Since port=0
will no longer be added in a subsequent commit, we append a ',' to every
arg instead of prepending, and remove the last one before adding it to
the arg list.
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
Commit 'ef2ab8fd' moved just the virDomainConfNWFilterTeardown and left
the logic to save/restore the current error essentially doing nothing
in the error path for qemuBuildCommandLine. So move it to where it
was meant to be.
Although the original code would reset the filter on command creation
errors after building the network command portion and commit 'ef2ab8fd'
altered that logic, the teardown is called during qemuProcessStop from
virDomainConfVMNWFilterTeardown and that code has the save/restore
last error logic, so just allow that code to handle the teardown rather
than running it twice. The qemuProcessStop would be called in the failure
path of qemuBuildCommandLine.
We include the file in plenty of places. This is mostly due to
historical reasons. The only place that needs something from the
header file is storage_backend_fs which opens _PATH_MOUNTED. But
it gets the file included indirectly via mntent.h. At no other
place in our code we need _PATH_.*. Drop the include and
configure check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Mostly it is just passing new parameter here and there. In case
of zero value we fallback to auto selecting port and thus keep
backward compatibility.
Also we need to fix places of auto selected port managment.
We should bother only when auto selected was done that is
when externally specified port is not 0.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
In qemuConnectDomainXMLToNative() we set up the monitor, but we never
memset() it to zeros. Thanks to the introduction of the logfile
parameter of chardevs (and the logfile member of the struct), we started
checking whether that's non-NULL and that exposed this old error.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reverting to a snapshot may change domain configuration. New
configuration should be saved if domain has persistent flag.
VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT is emitted in case of
configuration update.
Add new function to manage adding the panic device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the NVRAM device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the RNG device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildRNGDevStr to use const virDomainDef instead
of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the memballoon device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also modify the qemuBuildMemballoonDevStr to use const virDomainDef
instead of virDomainDefPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
