After this patch, ownership of virPCIDevice instances is very easy
to keep track of: for each host PCI device, the only instance that
actually matters is the one inside one of the bookkeeping list.
Whenever some operation needs to be performed on a PCI device, the
actual device is looked up first; when this is not the case, a
comment explains the reason.
Unmanaged devices, as the name suggests, are not detached
automatically from the host by libvirt before being attached to a
guest: it's the user's responsability to detach them manually
beforehand. If that preliminary step has not been performed, the
attach operation can't complete successfully.
Instead of relying on the lower layers to error out with cryptic
messages such as
error: Failed to attach device from /tmp/hostdev.xml
error: Path '/dev/vfio/12' is not accessible: No such file or directory
prevent the situation altogether and provide the user with a more
useful error message.
Unmanaged devices are attached to guests in two steps: first,
the device is detached from the host and marked as inactive;
subsequently, it is marked as active and attached to the guest.
If the daemon is restarted between these two operations, we lose
track of the inactive device.
Steps 5 and 6 of virHostdevPreparePCIDevices() already subtly
take care of this situation, but some planned changes will make
it so that's no longer the case. Plus, explicit is always better
than implicit.
Update testutilsqemu to overwrite libDir and channelTargetDir and set
private paths using domain's privateData. This changes is required for
following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will skip few steps from qemuProcessStart in order to create only
qemu CMD. Use a VIR_QEMU_PROCESS_START_PRETEND for all the qemuProcess*
functions called by this one to not modify or check host.
This new function will be used later on for XMLToNative API and also for
qemuxml2argvtest to make sure that both API and test uses the same code
as qemuProcessStart.
We need also update qemuProcessInit to wrap few lines of code with check
that VIR_QEMU_PROCESS_START_PRETEND that makes sense only for
qemuProcessStart.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that checks host and domain. Do not check host if we use
VIR_QEMU_PROCESS_START_PRETEND flag.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that modifies only live XML to this function. The new
VIR_QEMU_PROCESS_START_PRETEND flag will be used by qemuXMLToNative and
qemuxml2argvtest later in order to reuse the same code as
qemuProcessStart uses.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The postParse callback is the correct place to generate default values
that should be present in offline XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
QEMU changed the error message to:
"Tray of device 'drive-sata0-0-1' is not open"
and they may change the error massage in the future.
This updates the code to not depend on the text from the error message
but only on error itself.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Every aligning requires at least one cast and it's hard to read. Let's
make a function that makes sure the pointer is moved according to the
alignment and use that to move throughout the data buffer.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Problem is that in the test any status file matching
tests/nssdata/*.status is loaded as it contains IP addresses that
are parsed. However, there's no order specified in which the
files are loaded. Therefore on different systems the order may be
different. This is then producing an unexpected results.
Instead of defining an order in which the files are loaded, make
the code that checks for missing IP addresses (or redundant ones)
cope with unordered list of addresses. The reasoning behind is
that the code doing the parsing is used in real NSS module where
we don't care for ordering.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When reading in an XML definition for a SCSI target device, the name
property of struct scsi_target refers to the @target element.
Let's fix this obvious typo and also extend the XML schema to provide
validation.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Until now, the libxl driver ignored any <hap> setting in domain XML
and deferred to libxl, which enables hap if not specified. While
this is a good default, it prevents disabling hap if desired.
This change allows disabling hap with <hap state='off'/>. hap is
explicitly enabled with <hap/> or <hap state='on/>. Absense of <hap>
retains current behavior of deferring default state to libxl.
hap is enabled by default in xm and xl config and usually only
specified when it is desirable to disable hap (hap = 0). Change
the xm,xl <-> xml converter to behave similarly. I.e. only
produce 'hap = 0' when <hap state='off'/> and vice versa.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Most hypervisors use Hardware Assisted Paging by default and don't
require specifying the feature in domain conf. But some hypervisors
support disabling HAP on a per-domain basis. To enable HAP by default
yet provide a knob to disable it, extend the <hap> feature with a
'state=on|off' attribute, similar to <pvspinlock> and <vmport> features.
In the absence of <hap>, the hypervisor default (on) is used. <hap>
without the state attribute would be the same as <hap state='on'/> for
backwards compatibility. And of course <hap state='off'/> disables hap.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The function already takes two bool arguments, switching to flags makes
it a lot easier to read. Especially in case we need to add another
boolean in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In post-copy mode none of the hosts has a complete guest state and
rolling back migration is impossible. Thus aborting it would be
equivalent to destroying the domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When migration fails in the post-copy mode, it's impossible to just kill
the destination domain and resume the source since the source no longer
contains current guest state. Let's mark domains on both sides as
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED to let the upper layer decide what to
do with them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destination libvirtd is restarted during migration in Finish phase
just after the point we started guest CPUs, we should not kill the
domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Migration enters "postcopy-active" state after QEMU switches to
post-copy and pauses guest CPUs. From libvirt's point of view this state
is similar to "completed" because we need to transfer guest execution to
the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To use post-copy one has to start the migration with
VIR_MIGRATE_POSTCOPY flag and, while migration is in progress, call
virDomainMigrateStartPostCopy() to switch from pre-copy to post-copy.
Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This allows setting the address in host and/or network order and makes
the naming consistent. Now you don't need to call [hn]to[nh]l()
functions as that is taken care of by these functions. Also, now
the *NetOrder take the address in network order, the other functions in
host order so the naming and usage is consistent. Some places were
having the address in network order and calling ntohl() just so the
original function can call htonl() again. This makes it nicer to read.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If a <graphics type='spice'> has no port nor tlsPort set, the generated
QEMU command line will contain -spice port=0.
This is later going to be ignored by spice-server, but it's better not
to add it at all in this situation.
As an empty -spice is not allowed, we still need to append port=0 if we
did not add any other argument.
The end goal is to avoid adding -spice port=0,addr=127.0.0.1 to QEMU command
line when no SPICE port is specified in libvirt XML.
Currently, the code relies on port=xx to always be present, so subsequent
args can be unconditionally appended with a leading ','. Since port=0
will no longer be added in a subsequent commit, we append a ',' to every
arg instead of prepending, and remove the last one before adding it to
the arg list.
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
Even if nss is disabled, the build system tries to build some
targets like libnss_libvirt_impl.la and nsstest. Hide those
under the "if WITH_NSS" block like the rest of NSS plugin bits.
