This function takes a FD and determines whether the current
position is in data section or in a hole. In addition to that,
it also determines how much bytes are there remaining till the
current section ends.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One big downside of using the pipe to transfer the data is that
we can really transfer just bare data. No metadata can be carried
through unless some formatted messages are introduced. That would
be quite painful to achieve so let's use a message queue. It's
fairly easy to exchange info between threads now that iohelper is
no longer used.
The reason why we cannot use the FD for plain files directly is
that despite us setting noblock flag on the FD, any
read()/write() blocks regardless (which is a show stopper since
those parts of the code are run from the event loop) and poll()
reports such FD as always readable/writable - even though the
subsequent operation might block.
The pipe is still not gone though. It is used to signal the event
loop that an event occurred (e.g. data is available for reading
in the queue, or vice versa).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since we allow active layer block commit the users are allowed to commit
the top of the chain (e.g. vda) into the backing image. The API would
not accept that parameter, as it tried to look up the image in the
backing chain.
Add the ability to use the top level image target name explicitly as the
top image of the block commit operation.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1451394
The QEMU default is GICv2, and some of the code in libvirt
relies on the exact value. Stop pretending that's not the
case and use GICv2 explicitly where needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There are currently some limitations in the emulated GICv3
that make it unsuitable as a default. Use GICv2 instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450433
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently we consider all UNIX paths with specific prefix as generated
by libvirt, but that's a wrong assumption. Let's make the detection
better by actually checking whether the whole path matches one of the
paths that we generate or generated in the past.
The UNIX path isn't stored in config XML since libvirt-1.3.1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The debian etch distro was end-of-life a long time ago so we no
longer need the ULLONG_MAX hack. In any case gnulib now provides
an equivalent fix by default, and so our definition now triggers
syntax-check rule failure
src/internal.h:# define ULLONG_MAX ULONG_LONG_MAX
maint.mk: define the above via some gnulib .h file
maint.mk:843: recipe for target 'sc_prohibit_always-defined_macros' failed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add kernel_irqchip=split/on to the QEMU command line
and a capability that looks for it in query-command-line-options
output. For the 'split' option, use a version check
since it cannot be reasonably probed.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
There should be no need to make dir based pools world/group readable.
So use 0711, not 0755, as the default perms for storage dirs.
Updates in v2:
- adapt commit wording to mention dropping group readable as well
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The metadata libvirt cares about is identical for version 3
as for previous versions, so we merely need list the new
version number.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a shutdown is expected because it was triggered via libvirt we can
also expect the monitor to close. In those cases do not report an
internal error like:
"internal error: End of file from qemu monitor"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Simply tries to match the provided regex on a string and returns
the result. Useful if caller don't care about the matched substring
and want to just test if some pattern patches a string.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The @type from virFileReadValueString needs to be VIR_FREE each time
through the loop since it's not saved and since cleanup can be reached
prior to decoding it for @kernel_type amd bank->type, the cleanup code
needs to also have a VIR_FREE
Found by Coverity
Adjust the current message to make it clear, that it is the hotplug
operation that is unsupported with the given host device type.
https://bugzilla.redhat.com/show_bug.cgi?id=1450072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When running on a NUMA machine, populate the sibling node
and distance information using data supplied by Xen.
With locality distances information, under Xen, new host
capabilities would like:
<topology>
<cells num='4'>
<cell id='0'>
<memory unit='KiB'>263902380</memory>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='21'/>
</distances>
...
</cell>
...
</cells>
...
</topology>
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
GCC complains that inlining virStringTrimOptionalNewline is not
likely on some platforms:
cc1: warnings being treated as errors
../../src/util/virfile.c: In function 'virFileReadValueBitmap':
../../src/util/virstring.h:292: error: inlining failed in call to 'virStringTrimOptionalNewline': call is unlikely and code size would grow [-Winline]
../../src/util/virfile.c:3987: error: called from here [-Winline]
Inlining this function is not going to be a measurable performance
benefit either, since the time required to execute it is going to
be dominated by running of strlen() over the string, not by the
function call overhead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Added only in drivers that were already calling
virCapabilitiesInitNUMA(). Instead of refactoring all the callers to
behave the same way in case of error, just follow what the callers are
doing for all the functions.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We're only adding only info about L3 caches, we can add more
later (just by changing one line), but for now that's more than enough
without overwhelming anyone.
XML snippet of how this should look like (also seen as part of the commit):
<cache>
<bank id='0' level='3' type='both' size='8192' unit='KiB' cpus='0-7'/>
</cache>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It is no longer needed thanks to the great virfilewrapper.c. And this
way we don't have to add a new set of functions for each prefixed
path.
While on that, add two functions that weren't there before, string and
scaled integer reading ones. Also increase the length of the string
being read by one to accompany for the optional newline at the
end (i.e. change INT_STRLEN_BOUND to INT_BUFSIZE_BOUND).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So, because mingw is somehow OK with dereferencing a pointer within a
VIR_DEBUG macro, compared to outside of it to which it complained with a
"potential NULL pointer dereference" error (still a false positive), we
can make the code a tiny bit cleaner.
Sighed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When adding a nwfilter onto the list in
virNWFilterObjListAssignDef() this array is re-allocated to match
demand for new size. However, it is never freed leading to a
leak:
==26535== 136 bytes in 1 blocks are definitely lost in loss record 1,079 of 1,250
==26535== at 0x4C2E2BE: realloc (vg_replace_malloc.c:785)
==26535== by 0x54BA28E: virReallocN (viralloc.c:245)
==26535== by 0x54BA384: virExpandN (viralloc.c:294)
==26535== by 0x54BA657: virInsertElementsN (viralloc.c:436)
==26535== by 0x55DB011: virNWFilterObjListAssignDef (virnwfilterobj.c:362)
==26535== by 0x55DB530: virNWFilterObjListLoadConfig (virnwfilterobj.c:503)
==26535== by 0x55DB635: virNWFilterObjListLoadAllConfigs (virnwfilterobj.c:539)
==26535== by 0x2AC5A28B: nwfilterStateInitialize (nwfilter_driver.c:250)
==26535== by 0x5621C64: virStateInitialize (libvirt.c:770)
==26535== by 0x124379: daemonRunStateInit (libvirtd.c:881)
==26535== by 0x554AC78: virThreadHelper (virthread.c:206)
==26535== by 0x8F5F493: start_thread (in /lib64/libpthread-2.23.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
After bdcf6e481 there is a crasher in libvirt. The commit assumes
that priv->perf is always set. That is not true. For inactive
domains, the priv->perf is not allocated as it is set in
qemuProcessLaunch(). Now, usually we differentiate between
accesses to inactive and active definition and it works just
fine. Except for 'domstats'. There priv->perf is accessed without
prior check for domain inactivity. While we could check for that,
more robust solution is to make virPerfEventIsEnabled() accept
NULL.
How to reproduce:
1) ensure you have at least one inactive domain
2) virsh domstats
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
This patch fixes the following MinGW error (although actually being a
false positive):
../../src/util/virmdev.c: In function 'virMediatedDeviceListMarkDevices':
../../src/util/virmdev.c:453:21: error: potential null pointer
dereference [-Werror=null-dereference]
const char *mdev_path = mdev->path;
^~~~~~~~~
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The problem resides in virHostdevUpdateActiveMediatedDevices which gets
called during qemuProcessReconnect. The issue here is that
virMediatedDeviceListAdd takes a pointer to the item to be added to the
list to which VIR_APPEND_ELEMENT is used, which also clears the pointer.
However, in this case only the local copy of the pointer got cleared,
leaving the original pointing to valid memory. To sum it up, during
cleanup phase, the original pointer is freed and the daemon crashes
basically any time it would access it.
Backtrace:
0x00007ffff3ccdeba in __strcmp_sse2_unaligned
0x00007ffff72a444a in virMediatedDeviceListFindIndex
0x00007ffff7241446 in virHostdevReAttachMediatedDevices
0x00007fffc60215d9 in qemuHostdevReAttachMediatedDevices
0x00007fffc60216dc in qemuHostdevReAttachDomainDevices
0x00007fffc6046e6f in qemuProcessStop
0x00007fffc6091596 in processMonitorEOFEvent
0x00007fffc6091793 in qemuProcessEventHandler
0x00007ffff7294bf5 in virThreadPoolWorker
0x00007ffff7294184 in virThreadHelper
0x00007ffff3fdc3c4 in start_thread () from /lib64/libpthread.so.0
0x00007ffff3d269cf in clone () from /lib64/libc.so.6
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446455
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Use a local variable to hold data, rather than accessing the pointer
after calling virMediatedDeviceListAdd (therefore VIR_APPEND_ELEMENT).
Although not causing an issue at the moment, this change is a necessary
prerequisite for tweaking virMediatedDeviceListAdd in a separate patch,
which will take a reference for the source pointer (instead of pointer
value) and will clear it along the way.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Even though there are several checks before calling this function
and for some scenarios we don't call it at all (e.g. on disk hot
unplug), it may be possible to sneak in some weird files (e.g. if
domain would have RNG with /dev/shm/some_file as its backend). No
matter how improbable, we shouldn't unlink it as we would be
unlinking a file from the host which we haven't created in the
first place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
Just like in previous commit, this fixes the same issue for
hotplug.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
While the code allows devices to already be there (by some
miracle), we shouldn't try to create devices that don't belong to
us. For instance, we shouldn't try to create /dev/shm/file
because /dev/shm is a mount point that is preserved. Therefore if
a file is created there from an outside (e.g. by mgmt application
or some other daemon running on the system like vhostmd), it
exists in the qemu namespace too as the mount point is the same.
It's only /dev and /dev only that is different. The same
reasoning applies to all other preserved mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
Currently, all we need to do in qemuDomainCreateDeviceRecursive() is to
take given @device, get all kinds of info on it (major & minor numbers,
owner, seclabels) and create its copy at a temporary location @path
(usually /var/run/libvirt/qemu/$domName.dev), if @device live under
/dev. This is, however, very loose condition, as it also means
/dev/shm/* is created too. Therefor, we will need to pass more arguments
into the function for better decision making (e.g. list of mount points
under /dev). Instead of adding more arguments to all the functions (not
easily reachable because some functions are callback with strictly
defined type), lets just turn this one 'const char *' into a 'struct *'.
New "arguments" can be then added at no cost.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
When setting up mount namespace for a qemu domain the following
steps are executed:
1) get list of mountpoints under /dev/
2) move them to /var/run/libvirt/qemu/$domName.ext
3) start constructing new device tree under /var/run/libvirt/qemu/$domName.dev
4) move the mountpoint of the new device tree to /dev
5) restore original mountpoints from step 2)
Note the problem with this approach is that if some device in step
3) requires access to a mountpoint from step 2) it will fail as
the mountpoint is not there anymore. For instance consider the
following domain disk configuration:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/dev/shm/vhostmd0'/>
<target dev='vdb' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
In this case operation fails as we are unable to create vhostmd0
in the new device tree because after step 2) there is no /dev/shm
anymore. Leave aside fact that we shouldn't try to create devices
living in other mountpoints. That's a separate bug that will be
addressed later.
Currently, the order described above is rearranged to:
1) get list of mountpoints under /dev/
2) start constructing new device tree under /var/run/libvirt/qemu/$domName.dev
3) move them to /var/run/libvirt/qemu/$domName.ext
4) move the mountpoint of the new device tree to /dev
5) restore original mountpoints from step 3)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
When we get a POLLHUP or VIR_EVENT_HANDLE_HANGUP event for a client, we
still want to read from the socket to process any accumulated data. But
doing so inevitably results in an error and a call to
virNetClientMarkClose before we get to processing the hangup event (and
another call to virNetClientMarkClose). However the close reason passed
to the second virNetClientMarkClose call is ignored because another one
was already set. We need to pass the correct close reason when marking
the socket to be closed for the first time.
https://bugzilla.redhat.com/show_bug.cgi?id=1373859
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While fixing a bug with incorrectly freed memory in commit
v3.1.0-399-g5498aa29a, I accidentally broke persistent migration of
transient domains. Before adding qemuDomainDefCopy in the path, the code
just took NULL from vm->newDef and used it as the persistent def, which
resulted in no persistent XML being sent in the migration cookie. This
scenario is perfectly valid and the destination correctly handles it by
using the incoming live definition and storing it as the persistent one.
After the mentioned commit libvirtd would just segfault in the described
scenario.
https://bugzilla.redhat.com/show_bug.cgi?id=1446205
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If we are encoding a block of data that is 16 bytes in length,
we cannot leave it as 16 bytes, we must pad it out to the next
block boundary, 32 bytes. Without this padding, the decoder will
incorrectly treat the last byte of plain text as the padding
length, as it can't distinguish padded from non-padded data.
The problem exhibited itself when using a 16 byte passphrase
for a LUKS volume
$ virsh secret-set-value 55806c7d-8e93-456f-829b-607d8c198367 \
$(echo -n 1234567812345678 | base64)
Secret value set
$ virsh start demo
error: Failed to start domain demo
error: internal error: process exited while connecting to monitor: >>>>>>>>>>Len 16
2017-05-02T10:35:40.016390Z qemu-system-x86_64: -object \
secret,id=virtio-disk1-luks-secret0,data=SEtNi5vDUeyseMKHwc1c1Q==,\
keyid=masterKey0,iv=zm7apUB1A6dPcH53VW960Q==,format=base64: \
Incorrect number of padding bytes (56) found on decrypted data
Notice how the padding '56' corresponds to the ordinal value of
the character '8'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When creating v3.2.0-77-g8be3ccd04 commit, I completely forgot that one
migration capability is very special. It's the "events" capability which
tells QEMU to report "MIGRATION" events. Since libvirt always wants the
events, it is enabled in qemuConnectMonitor and the rest of the code
should not touch it.
https://bugzilla.redhat.com/show_bug.cgi?id=1439841https://bugzilla.redhat.com/show_bug.cgi?id=1441165
Messed-up-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
... with VIR_NET_GENERATED_MACV???_PREFIX, which is defined in
util/virnetdevmacvlan.h.
Since VIR_NET_GENERATED_PREFIX is used for plain tap devices, it is
renamed to VIR_NET_GENERATED_TAP_PREFIX and moved to virnetdev.h
The parser had been clearing out *all* suggested device names for
type='direct' (aka macvtap) interfaces. All of the code implementing
macvtap allows for a user-specified device name, so we should allow
it. In the case that an interface name starts with "macvtap" or
"macvlan" though, we do still clear it out, just as we do with "vnet"
(which is the prefix used for automatically generated tap device
names), since those are the prefixes for the names we autogenerate for
macvtap and macvlan devices.
Resolves: https://bugzilla.redhat.com/1335798
MACVTAP_NAME_PREFIX and MACVLAN_NAME_PREFIX could be useful to other
files if they were defined in virnetdevmacvlan.h instead of
virnetdevmacvlan.c, so do that (while slightly renaming them and also
adding yet another #define that chooses between macvlan/macvtap based
on flags).
This is a prerequisite to fix: https://bugzilla.redhat.com/1335798
If the network isn't active during networkNotifyActualDevice(), we
would log an error message stating that the bridge device didn't
exist. This patch adds a check to see if the network is active, making
the logs more useful in the case that it isn't.
Partially resolves: https://bugzilla.redhat.com/1442700
Nothing that could happen during networkNotifyActualDevice() could
justify unceremoniously killing the qemu process, but that's what we
were doing.
In particular, new code added in commit 85bcc022 (first appearred in
libvirt-3.2.0) attempts to reattach tap devices to their assigned
bridge devices when libvirtd restarts (to make it easier to recover
from a restart of a libvirt network). But if the network has been
stopped and *not* restarted, the bridge device won't exist and
networkNotifyActualDevice() will fail.
This patch changes networkNotifyActualDevice() and
qemuProcessNotifyNets() to return void, so that qemuProcessReconnect()
will soldier on regardless of what happens (any errors will still be
logged though).
Partially resolves: https://bugzilla.redhat.com/1442700
After 1eb6647979 nobody calls the iohelper with 6 arguments.
Everybody uses the other mode. Well, the only user of iohelper
after the previous commit is virFileWrapperFd really.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently we use iohelper for virFDStream implementation. This is
because UNIX I/O can lie sometimes: even though a FD for a
file/block device is set as unblocking, actual read()/write() can
block. To avoid this, a pipe is created and one end is kept for
read/write while the other is handed over to iohelper to
write/read the data for us. Thus it's iohelper which gets blocked
and not our event loop.
This approach has two problems:
1) we are spawning a new process.
2) any exchange of information between daemon and iohelper can be
done only through the pipe.
Therefore, iohelper is replaced with an implementation in thread
which is created just for the stream lifetime. The data are still
transferred through pipe (for now), but both problems described
above are solved.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
While this is no functional change, it makes the code look a bit
nicer. Moreover, it prepares ground for future work.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There is really no reason why we should have to have 'struct'
everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a USB3 controller and it's a better choice than piix3-uhci.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
The new logic will set the piix3-uhci if available regardless of
any architecture and it will be updated to better model based on
architecture and device existence.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
Since commit c5f6151390 qemuDomainBlockInfo tries to update the
"physical" storage size for all network storage and not only block
devices.
Since the storage driver APIs to do this are not implemented for certain
storage types (RBD, iSCSI, ...) the code would fail to retrieve any data
since the failure of qemuDomainStorageUpdatePhysical is fatal.
Since it's desired to return data even if the total size can't be
updated we need to ignore errors from that function and return plausible
data.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1442344
Since the private data structure is not freed upon stopping a VM, the
usbaddrs pointer would be leaked:
==15388== 136 (16 direct, 120 indirect) bytes in 1 blocks are definitely lost in loss record 893 of 1,019
==15388== at 0x4C2CF55: calloc (vg_replace_malloc.c:711)
==15388== by 0x54BF64A: virAlloc (viralloc.c:144)
==15388== by 0x5547588: virDomainUSBAddressSetCreate (domain_addr.c:1608)
==15388== by 0x144D38A2: qemuDomainAssignUSBAddresses (qemu_domain_address.c:2458)
==15388== by 0x144D38A2: qemuDomainAssignAddresses (qemu_domain_address.c:2515)
==15388== by 0x144ED1E3: qemuProcessPrepareDomain (qemu_process.c:5398)
==15388== by 0x144F51FF: qemuProcessStart (qemu_process.c:5979)
[...]
Clean the stale data after shutting down the VM. Otherwise the data
would be leaked on next VM start. This happens due to the fact that the
private data object is not freed on destroy of the VM.
Per xen-xl conversions from and to native under host-passthrough
mode we take care for Xen (nestedhvm = mode) applied and inherited
settings generating or processing correct feature policy:
[On Intel (VT-x) architectures]
<feature policy='disable' name='vmx'/>
or
[On AMD (AMD-V) architectures]
<feature policy='disable' name='svm'/>
It will then generate (or parse) for nestedhvm=1 in/from xl format.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Xen feature nestedhvm is the option on Xen 4.4+ which enables
nested virtualization when mode host-passthrough is applied.
nested HVM is enabled by adding below on the target domain;
<cpu mode='host-passthrough'/>
Virtualization on target domain can be disabled by specifying
such under feature policy rule on target name;
[On Intel (VT-x) architecture]
<feature policy='disable' name='vmx'/>
or:
[On AMD (AMD-V) architecture]
<feature policy='disable' name='svm'/>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
This patch maps /domain/cpu/cache element into -cpu parameters:
- <cache mode='passthrough'/> is translated to host-cache-info=on
- <cache level='3' mode='emulate'/> is transformed into l3-cache=on
- <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off
Any other <cache> element is forbidden.
The tricky part is detecting whether QEMU supports the CPU properties.
The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480,
earlier QEMU releases enabled host-cache-info by default and had no way
to disable it. If the property is present, it defaults to 'off' for any
QEMU until at least 2.9.0.
The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa.
Earlier versions worked as if l3-cache=off was passed. For any QEMU
until at least 2.9.0 l3-cache is 'off' by default.
QEMU 2.9.0 was the first release which supports probing both properties
by running device-list-properties with typename=host-x86_64-cpu. Older
QEMU releases did not support device-list-properties command for CPU
devices. Thus we can't really rely on probing them and we can just use
query-cpu-model-expansion QMP command as a witness.
Because the cache property probing is only reliable for QEMU >= 2.9.0
when both are already supported for quite a few releases, we let QEMU
report an error if a specific cache mode is explicitly requested. The
other mode (or both if a user requested CPU cache to be disabled) is
explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case
the QEMU defaults change. Any older QEMU already turns them off so not
doing so explicitly does not make any harm.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch introduces
<cache level='N' mode='emulate'/>
<cache mode='passthrough'/>
<cache mode='disable'/>
sub element of /domain/cpu. Currently only a single <cache> element is
allowed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The type of this parameter is virCPUType so calling it 'mode' is pretty
strange, 'type' is a much better name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Not all async jobs are visible via virDomainGetJobStats (either they are
too fast or getting the stats is not allowed during the job), but
forcing all of them to advertise the operation is easier than hunting
the jobs for which fetching statistics is allowed. And we won't need to
think about this when we add support for getting stats for more jobs.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As with virtio-scsi, the "internal error" messages after
preparing a vhost-scsi hostdev overwrites more meaningful
error messages deeper in the callchain. Remove it too.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
I tried to attach a SCSI LUN to two different guests, and forgot
to specify "shareable" in the hostdev XML. Attaching the device
to the second guest failed, but the message was not helpful in
telling me what I was doing wrong:
$ cat scsi_scratch_disk.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host3'/>
<address bus='0' target='15' unit='1074151456'/>
</source>
</hostdev>
$ virsh attach-device dasd_sles_d99c scsi_scratch_disk.xml
Device attached successfully
$ virsh attach-device dasd_fedora_0e1e scsi_scratch_disk.xml
error: Failed to attach device from scsi_scratch_disk.xml
error: internal error: Unable to prepare scsi hostdev: scsi_host3:0:15:1074151456
I eventually discovered my error, but thought it was weird that
Libvirt doesn't provide something more helpful in this case.
Looking over the code we had just gone through, I commented out
the "internal error" message, and got something more useful:
$ virsh attach-device dasd_fedora_0e1e scsi_scratch_disk.xml
error: Failed to attach device from scsi_scratch_disk.xml
error: Requested operation is not valid: SCSI device 3:0:15:1074151456 is already in use by other domain(s) as 'non-shareable'
Looking over the error paths here, we seem to issue better
messages deeper in the callchain so these "internal error"
messages overwrite any of them. Remove them, so that the
more detailed errors are seen.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
0feebab2 adds calling qemuBlockNodeNamesDetect for completed job
on updating block jobs. This affects cancelling drive mirror logic as
this function drops vm lock. Now we have to recheck all disks
before the disk with the completed block job before going
to wait for block job events.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuDomainGetNumaParameters would return the automatic nodeset even for
the persistent config if the domain was running. This is incorrect since
the automatic nodeset will be re-queried upon starting the vm.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1445325
While peer-to-peer migration enters the Confirm phase even if the
Perform phase fails, the client which initiated a non-p2p migration will
never call virDomainMigrateConfirm* API if the Perform phase failed.
Thus we need to explicitly reset migration before reporting a failure
from the Perform phase API.
https://bugzilla.redhat.com/show_bug.cgi?id=1425003
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The recently added sanlock_strerror function can be used to translate
sanlock's numeric errors into human readable strings.
https://bugzilla.redhat.com/show_bug.cgi?id=1409511
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Migration with old QEMU which does not support query-migrate-parameters
would fail because the QMP command is called unconditionally since the
introduction of TLS migration. Previously it was only called if the user
explicitly requested a feature which uses QEMU migration parameters. And
even then the situation was not ideal, instead of reporting an
unsupported feature we'd just complain about missing QMP command.
Trivially no migration parameters are supported when
query-migrate-parameters QMP command is missing. There's no need to
report an error if it is missing, the callers will report better error
if needed.
https://bugzilla.redhat.com/show_bug.cgi?id=1441934
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than waiting for the first save to fail, let's generate the
directory with the correct privs during initialization.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than overloading one function - split apart the logic to have
separate interfaces and local/private structures to manage the data
for which the helper is collecting.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than 'nuuids' it should be 'maxuuids' and rather than 'got'
it should be 'nuuids'. Alter the logic of the list traversal to
utilize those names.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than using "ret = -1" and cleanup processing, alter the return
path on failure to goto error and then just return the data.got.
In the error path, we no longer check for ret < 0, we just can free
anything added to the array and return -1 directly.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than dereferencing obj->def->X, create a local 'def' variable
that will dereference the def and use directly.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When processing a virSecretPtr use 'secret' as a variable name.
When processing a virSecretObjPtr use 'obj' as a variable name.
When processing a virSecretDefPtr use 'def' as a variable name,
unless a distinction needs to be made with a 'newdef' such as
virSecretObjListAddLocked (which also used the VIR_STEAL_PTR macro
for the configFile and base64File).
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have the caller check if !obj before calling, just check
in the function for !obj and return.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Make various virSecretObjList*Locked functions static and make
virSecretObjNew static since they're only called within virtsecretobj.c.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Only save the config when using a generated UUID if we were able to
create an object for the def. There could have been "other reasons"
for the assignment to fail, so saving the config could be incorrect.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than "wait" for the first config file to be created, force creation
of the configDir during driver state initialization.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Essentially virNWFilterSaveDef executed in a different order the same
sequence of calls, so let's just make one point of reference.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than separate calls, use a common call and generate a better
error message which includes the incorrect uuidstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move from virnwfilterobj.h to virnwfilterobj.c.
Create the virNWFilterObjListNew() API in order to allocate.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structure to virnwfilterobj.c and create necessary accessor API's
for the various fields.
Also make virNWFilterObjFree static since there's no external callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than dereferencing obj->def->XXX or nwfilters->objs[i]->X
create local virNWFilterObjPtr and virNWFilterDefPtr variables.
Future adjustments will be privatizing the object more, so this just
prepares the code for that reality.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When processing a virNWFilterPtr use 'nwfilter' as a variable name.
When processing a virNWFilterObjPtr use 'obj' as a variable name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Instead of figuring out upfront whether <input> will be a single
or a pair element, format the subelements into a separate buffer
and close <input/> early if this buffer is empty.
https://bugzilla.redhat.com/show_bug.cgi?id=1439132
During 'matrix' testing of all possible combinations I found that if
device is formated with "gpt" first, then an attempt is made to format
using "mac", a startup will fail.
Deeper analysis by Peter Krempa indicates that the "mac" table fits
into the first block on the disk. Since the GPT disklabel is stored
at LBA address 1 it is not overwritten at all. Thus it's apparent that
the (blkid) detection tool then prefers GPT over a older disklabel.
The GPT disklabel has also a secondary copy at the last LBA of the disk.
So, follow the same logic as the logical pool in clearing a 1MB swath
at the beginning and end of the device to avoid potential issues with
larger sector sizes for the device.
Also fixed a minor formatting nit in virStorageBackendDeviceIsEmpty call.
Create a wrapper/helper that can be used to call the storage backend
wipe helper - storageBackendVolWipeLocalFile for future use by logical
and disk backends to clear out the partition table rather than having
each open code the same algorithm.
Add bool 'zero_end' and logic that would allow a caller to wipe specific
portions of a target device either from the beginning (the default) or
from the end when zero_end is true.
This will allow for this code to wipe out partition table information
from a device.
There were a few bugs in keycodemap tool that broke it
when run on python circa 2.7.5 or older, which affected
RHEL builds.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A long time ago we imported the keymaps.csv file from GTK-VNC so we
can do conversions between keycode sets. Meanwhile lots of bug fixes
have gone into this CSV file and libvirt hasn't kept in sync. The
keymaps.csv file and associated generator script has been pulled out
of GTK-VNC into a dedicated GIT repo for use as a submodule. This
allows GTK-VNC, SPICE-GTK, QEMU and libvirt to share the same master
database and tools and pushing updates merely requires a submodule
commit update as with gnulib.
The test suite is updated to cover some extra boundary conditions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Shorten the time needed to keep the list lock and alter the cleanup
path to be more of an error path.
Utilize the the virObjectListFree function to handle the calls for
virObjectUnref on each list element and the VIR_FREE of the list
instead of open coding it.
Change the name of the virHashForEach callback to match the name
of the Export function with the Callback added onto it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '865f479da' altered the logic to use a common test*ObjFindByName
helpers which would lock/unlock the test driver; however, a few cleanup paths
in that cleanup missed removing the Unlock, so remove it now.
Signed-off-by: John Ferlan <jferlan@redhat.com>
it should be a comparison of modes between new and old devices. So
the argument of the second virDomainNetGetActualDirectMode should be
newdev.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Currently, virNetDevSetCoalesce() stub is always returning error. As
it's used by virNetDevTapCreateInBridgePort(), it essentially breaks
bridged networking if coalesce is not supported.
To make it work, relax the stub to trigger error only when its
coalesce argument is not NULL, otherwise report success.
Since we have that information provided by @def which is not a private
object, there is really no need for the variable.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So udevGetDeviceDetails was one those functions using an enum in a
switch, but since it had a 'default' case, compiler didn't warn about an
unhandled enum. Moreover, the error about an unsupported device type
reported in the default case is unnecessary, since by the time we get
there, udevGetDeviceType (which was called before) already made sure
that any unrecognized device types had been handled properly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
ka maybe have been freeed in virObjectUnref, application using
virKeepAliveTimer will segfault when unlock ka. We should keep
ka's refs positive before using it.
#0 0x00007fd8f79970e8 in virClassIsDerivedFrom (klass=0xdeadbeef, parent=0x7fd8e8001b80) at util/virobject.c:169
#1 0x00007fd8f799742e in virObjectIsClass (anyobj=anyobj entry=0x7fd8e800b9c0, klass=＜optimized out＞) at util/virobject.c:365
#2 0x00007fd8f79974e4 in virObjectUnlock (anyobj=0x7fd8e800b9c0) at util/virobject.c:338
#3 0x00007fd8f7ac477e in virKeepAliveTimer (timer=＜optimized out＞, opaque=0x7fd8e800b9c0) at rpc/virkeepalive.c:177
#4 0x00007fd8f7e5c9cf in libvirt_virEventInvokeTimeoutCallback () from /usr/lib64/python2.7/site-packages/libvirtmod.so
#5 0x00007fd8ff64db94 in PyEval_EvalFrameEx () from /lib64/libpython2.7.so.1.0
#6 0x00007fd8ff64f1ad in PyEval_EvalCodeEx () from /lib64/libpython2.7.so.1.0
#7 0x00007fd8ff64d85f in PyEval_EvalFrameEx () from /lib64/libpython2.7.so.1.0
#8 0x00007fd8ff64d950 in PyEval_EvalFrameEx () from /lib64/libpython2.7.so.1.0
#9 0x00007fd8ff64d950 in PyEval_EvalFrameEx () from /lib64/libpython2.7.so.1.0
#10 0x00007fd8ff64f1ad in PyEval_EvalCodeEx () from /lib64/libpython2.7.so.1.0
#11 0x00007fd8ff5dc098 in function_call () from /lib64/libpython2.7.so.1.0
#12 0x00007fd8ff5b7073 in PyObject_Call () from /lib64/libpython2.7.so.1.0
#13 0x00007fd8ff5c6085 in instancemethod_call () from /lib64/libpython2.7.so.1.0
#14 0x00007fd8ff5b7073 in PyObject_Call () from /lib64/libpython2.7.so.1.0
#15 0x00007fd8ff648ff7 in PyEval_CallObjectWithKeywords () from /lib64/libpython2.7.so.1.0
#16 0x00007fd8ff67d7e2 in t_bootstrap () from /lib64/libpython2.7.so.1.0
#17 0x00007fd8ff358df3 in start_thread () from /lib64/libpthread.so.0
#18 0x00007fd8fe97d3ed in clone () from /lib64/libc.so.6
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It was left there after removing a macro it was part of in first
version or so. Now it will always be NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit f4ef3a71 made a variation of virNetDevSetMAC that would return
without logging an error message if errno was set to
EADDRNOTAVAIL. This errno is set by some SRIOV VF drivers (in
particular igbvf) when they fail to set the device's MAC address due
to the PF driver refusing the request. This is useful if we want to
try a different method of setting the VF MAC address before giving up
(Commit 86556e16 actually does this, setting the desired MAC address
to the "admin MAC in the PF, then detaching and reattaching the VF
netdev driver to force a reinit of the MAC address).
During testing of Bug 1442040 t was discovered that the ixgbe driver
returns EPERM in this situation, so this patch changes the exception
case for silent+non-terminal failure to account for this difference.
Completes resolution to: https://bugzilla.redhat.com/1415609 (RHEL 7.4)
https://bugzilla.redhat.com/1442040 (RHEL 7.3.z)
The current fallback stub for virNetDevSetCoalesce is inside an
earlier conditional block. This deals with the feature being
missing on older Linux platforms. We need a second fallback stub
though, outside the top level conditional, to ensure builds work
on Win32/FreeBSD platforms too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch makes use of the virNetDevSetCoalesce() function to make
appropriate settings effective for devices that support them.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That function is able to configure coalesce settings for an interface,
similarly to 'ethtool -C'. This function also updates back the
structure so that it contains actual data on the device (if the device
doesn't support some settings kernel might just return 0 and not set
whatever is not supported), so this way we'll have up-to-date
information in the live domain XML.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reported by Rafał Wojciechowski <it@rafalwojciechowski.pl>.
Thread 1 (Thread 0x7f194b99d700 (LWP 5631)):
0 virNetDevGetifaddrsAddress (addr=0x7f194b99c7c0, ifname=0x7f193400e2b0 "ovirtmgmt") at util/virnetdevip.c:738
1 virNetDevIPAddrGet (ifname=0x7f193400e2b0 "ovirtmgmt", addr=addr@entry=0x7f194b99c7c0) at util/virnetdevip.c:795
2 0x00007f19467800d6 in networkGetNetworkAddress (netname=<optimized out>, netaddr=netaddr@entry=0x7f1924013f18) at network/bridge_driver.c:4780
3 0x00007f193e43a33c in qemuProcessGraphicsSetupNetworkAddress (listenAddr=0x7f19340f7650 "127.0.0.1", glisten=0x7f1924013f10) at qemu/qemu_process.c:4062
4 qemuProcessGraphicsSetupListen (vm=<optimized out>, graphics=0x7f1924014f10, cfg=0x7f1934119f00) at qemu/qemu_process.c:4133
5 qemuProcessSetupGraphics (flags=17, vm=0x7f19240155d0, driver=0x7f193411f1d0) at qemu/qemu_process.c:4196
6 qemuProcessPrepareDomain (conn=conn@entry=0x7f192c00ab50, driver=driver@entry=0x7f193411f1d0, vm=vm@entry=0x7f19240155d0, flags=flags@entry=17) at qemu/qemu_process.c:4969
7 0x00007f193e4417c0 in qemuProcessStart (conn=conn@entry=0x7f192c00ab50, driver=driver@entry=0x7f193411f1d0, vm=0x7f19240155d0,asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_START, migrateFrom=migrateFrom@entry=0x0, migrateFd=migrateFd@entry=-1, migratePath=migratePath@entry=0x0,snapshot=snapshot@entry=0x0, vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_CREATE, flags=17, flags@entry=1) at qemu/qemu_process.c:5553
Man page for getifaddrs also states that the "ifa_addr" may contain
a null pointer which happens if there is an existing network interface
on the host without IP address.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In the RPC client event loop code, if poll() returns only a POLLHUP
or POLLERR status, then we end up reporting a bogus error message:
error: failed to connect to the hypervisor
error: An error occurred, but the cause is unknown
We do actually report an error, but we virNetClientMarkClose method
has already captured the error status before we report it, so the
real error gets thrown away. The key fix is to report the error
before calling virNetClientMarkClose(). In changing this, we also
split out reporting of POLLHUP vs POLLERR to make any future bugs
easier to diagnose.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the vcpu hotplug code if exit from the monitor failed we would still
attempt to save the status XML. When the daemon is terminated the
monitor socket is closed. In such case, the written status XML would not
contain the monitor path and thus be invalid.
Avoid this issue by only saving status XML on success of the monitor
command.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1439452
The history of USB controller for ppc64 guest is complex and goes
back to libvirt 1.3.1 where the fun started.
Prior Libvirt 1.3.1 if no model for USB controller was specified
we've simply passed "-usb" on QEMU command line.
Since Libvirt 1.3.1 there is a patch (8156493d8d) that fixes this
issue by using "-device pci-ohci,..." but it breaks migration with
older Libvirts which was agreed that's acceptable. However this
patch didn't reflect this change in the domain XML and the model
was still missing.
Since Libvirt 2.2.0 there is a patch (f55eaccb0c) that fixes the
issue with not setting the USB model into domain XML which we need
to know about to not break the migration and since the default
model was *pci-ohci* it was used as default in this patch as well.
This patch tries to take all the previous changes into account and
also change the default for newly defined domains that don't specify
any model for USB controller.
The VIR_DOMAIN_DEF_PARSE_ABI_UPDATE is set only if new domain is
defined or new device is added into a domain which means that in
all other cases we will use the old *pci-ohci* model instead of the
better and not broken *nec-usb-xhci* model.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1373184
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So far there is probably no change that is allowed to be done
by the VIR_DOMAIN_DEF_PARSE_ABI_UPDATE flag that would break
guest ABI but this may change in the future.
This introduces new VIR_DOMAIN_DEF_PARSE_ABI_UPDATE_MIGRATION
which should be used only for ABI updates that are "safe" for
persistent migration.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
With QEMU older than 2.9.0 libvirt uses CPUID instruction to determine
what CPU features are supported on the host. This was later used when
checking compatibility of guest CPUs. Since QEMU 2.9.0 we ask QEMU for
the host CPU data. But the two methods we use usually provide disjoint
sets of CPU features because QEMU/KVM does not support all features
provided by the host CPU and on the other hand it can enable some
feature even if the host CPU does not support them.
So if there is a domain which requires a CPU features disabled by
QEMU/KVM, libvirt will refuse to start it with QEMU > 2.9.0 as its guest
CPU is incompatible with the host CPU data we got from QEMU. But such
domain would happily start on older QEMU (of course, the features would
be missing the guest CPU). To fix this regression, we need to combine
both CPU feature sets when checking guest CPU compatibility.
https://bugzilla.redhat.com/show_bug.cgi?id=1439933
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Sometimes we want to call virCPUGetHost only when it is implemented for
a given architecture to avoid logging expected and possibly misleading
errors. The new virCPUGetHostIsSupported API may be used to guard such
calls to virCPUGetHost.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
