Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
This function does not make any sense now, that network driver is
(almost) dropped. I mean, previously, when threads were
serialized, this function was there to check, if no other network
with the same name or UUID exists. However, nowadays that threads
can run more in parallel, this function is useless, in fact it
gives misleading return values. Consider the following scenario.
Two threads, both trying to define networks with same name but
different UUID (e.g. because it was generated during XML parsing
phase, whatever). Lets assume that both threads are about to call
networkValidate() which immediately calls
virNetworkObjIsDuplicate().
T1: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T2: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T1: calls virNetworkAssignDef() and successfully places its
network into the virNetworkObjList.
T2: calls virNetworkAssignDef() and since network with the same
name exists, the network definition is replaced.
Okay, this is mainly because virNetworkAssignDef() does not check
whether name and UUID matches. Well, lets make it so! And drop
useless function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Midonet is an opensource virtual networking that over lays the IP
network between hypervisors. Currently, such networks can be made
with the openvswitch virtualport type.
This patch, defines the schema and documentation that will serve
as basis for the follow up patches that will add support to libvirt
for using Midonet virtual ports for its interfaces. The schema
definition requires that the port profile expresses its interfaceid
as part of the port profile. For that reason, this is part of the
patch too.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
Previously we had to check for 3 fields to see if the source was filled.
Repurpose one of the variables as a boolean flag and use it instead of
combining multiple sources.
For the condition that checks that only CDROM/FLOPPY drives can be empty
we can use the virStorageSourceIsEmpty() helper.
We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int. That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.
QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit. Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
Now that the size of guest's memory can be inferred from the NUMA
configuration (if present) make it optional to specify <memory>
explicitly.
To make sure that memory is specified add a check that some form of
memory size was specified. One side effect of this change is that it is
no longer possible to specify 0KiB as memory size for the VM, but I
don't think it would be any useful to do so. (I can imagine embedded
systems without memory, just registers, but that's far from what libvirt
is usually doing).
Forbidding 0 memory for guests also fixes a few corner cases where 0 was
not interpreted correctly and caused failures. (Arguments for numad when
using automatic placement, size of the balloon). This fixes problems
described in https://bugzilla.redhat.com/show_bug.cgi?id=1161461
Test case changes are added to verify that the schema change and code
behave correctly.
Use the NUMA total instead of the configured size both in XML and for
uses in the code once NUMA is enabled for a domain.
One test case change is necessary as the rounding of the individual cell
sizes was not matching the rounding of the total size.
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
virDomainNetFindIdx no longer returns info whether device was not found,
or there was multiple matches. Additionally it already handle error
reporting. Introduce virDomainHasNet which does a simple task, without
implicit error reporting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
A helper that never returns an error and treats bits out of bitmap range
as false.
Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
More or less a virtual copy of the existing virDomainVcpuPin{Add|Del} API's.
NB: The IOThreads implementation "reused" the virDomainVcpuPinDefPtr
since it provided everything necessary - an "id" and a "map" for each
thread id configured.
This patch turns both virNetworkObjFindByUUID() and
virNetworkObjFindByName() to return an referenced object so that
even if caller unlocks it, it's for sure that object won't
disappear meanwhile. Especially if the object (in general) is
locked and unlocked during the caller run.
Moreover, this commit is nicely small, since the object unrefing
can be done in virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every API that touches internal structure of the object must lock
the object first. Not every API that has the object as an
argument needs to do that though. Some APIs just pass the object
to lower layers which, however, must lock the object then. Look
at the code, you'll get my meaning soon.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is going to be needed later, when some functions already
have the virNetworkObjList object already locked and need to
lookup a object to work on. As an example of such function is
virNetworkAssignDef(). The other use case might be in
virNetworkObjListForEach() callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Later we can turn APIs to lock the object if needed instead of
relying on caller to mutually exclude itself (probably done by
locking a big lock anyway).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is practically copy of qemuDomObjEndAPI. The reason why is
it so widely available is to avoid code duplication, since the
function is going to be called from our bridge driver, test
driver and parallels driver too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If a domain object is being removed and looked up concurrently we must
ensure we unlock the object before unreferencing it, since the latter
might free the object.
The flaw was introduced in commit feb1a4d792.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Undefining a running, autostarted domain removes the autostart link, but
dom->autostart is not cleared. If the domain is subsequently redefined,
libvirt thinks it is already autostarted and will not create the link
even if requested:
# virsh dominfo example | grep Autostart
Autostart: enable
# ls /etc/libvirt/qemu/autostart/example.xml
/etc/libvirt/qemu/autostart/example.xml
# virsh undefine example
Domain example has been undefined
# virsh define example.xml
Domain example defined from example.xml
# virsh dominfo example | grep Autostart
Autostart: enable
# virsh autostart example
Domain example marked as autostarted
# ls /etc/libvirt/qemu/autostart/example.xml
ls: cannot access /etc/libvirt/qemu/autostart/example.xml: No such file or directory
This commit ensures dom->autostart is cleared whenever the config and
autostart link (if present) are removed.
The bridge network driver cleared this flag itself in networkUndefine.
This commit moves this into virNetworkDeleteConfig for symmetry with
virDomainDeleteConfig, and to ensure it is not missed in future network
drivers.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API will be used in the future to call passed callback over
each network object in the list. It's slightly different to its
virDomainObjListForEach counterpart, because virDomainObjList
uses a hash table to store domain object, while virNetworkObjList
uses an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):
<devices>
<emulator>/usr/bin/qemu</emulator>
...
<panic>
</panic>
</devices>
Lets format "<panic/>" instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since the APIs support just one element per namespace and while
modifying an element all duplicates would be removed, let's do this
right away in the post parse callback.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190590
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
