Commit Graph

21 Commits

Author SHA1 Message Date
Daniel P. Berrangé
43c9c0859f qemu: use long on|off syntax for -chardev boolean option values
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.

The long format has been supported with -chardev since at least 1.5.3,
so we don't need to check for it.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-16 12:38:20 +00:00
Peter Krempa
8bcda6e260 qemu: Add test cases for 'host_cdrom' blockdev backend via <disk>
Simulate that the device is a cdrom when the path equals to /dev/cdrom
to provide testing for the 'host_cdrom' backend.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-11-02 14:14:51 +01:00
Daniel P. Berrangé
0279a51b83 tests: fix name of 32-bit x86 QEMU binary
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-03 13:57:44 +00:00
Michal Privoznik
a08c4b3741 qemu: Always assume QEMU_CAPS_REALTIME_MLOCK
The '-realtime mlock' cmd line argument was introduced in QEMU
commit v1.5.0-rc0~190 which matches minimal QEMU version we
require. Therefore, the capability will always be present.

Apparently, nearly none of our xml2argv test cases had the
capability hence slightly bigger change under qemuxml2argvdata/.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 13:39:42 +02:00
Erik Skultety
75a9169881 qemu: command: Override HOME variable for system QEMU
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-15 16:41:26 +01:00
Erik Skultety
7e73137495 qemu: command: Enforce setting XDG variables for system QEMU
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-15 16:41:26 +01:00
Peter Krempa
1dcba456fa qemu: caps: Always assume presence of 'ide-hd' and 'ide-cd' devices
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.

Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 08:34:17 +01:00
Peter Krempa
6db0d03383 qemu: command: Don't skip 'readonly' and throttling info for empty drive
In commit f80eae8c2a I was too agresive in removing properties of
-drive for empty drives. It turns out that qemu actually persists the
state of 'readonly' and the throttling information even for the empty
drive.

Removing 'readonly' thus made qemu open any subsequent images added via
the 'change' command as RW which was forbidden by selinux thanks to the
restrictive sVirt label for readonly media.

Fix this by formating the property again and bump the tests and leave a
note detailing why the rest of the properties needs to be skipped.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-04 09:49:37 +01:00
Peter Krempa
f80eae8c2a qemu: command: Don't format image properties for empty -drive
If a -drive has no image, using image properties makes qemu whine that
they should not be used.

This patch stops formating cache/readonly/... for empty drives
for the pre-blockdev syntax. Unfortunately those parameters can't be
added later when inserting media, but on the other hand qemu will start
with an empty drive.

Since we already were able to start a VM with such config previously due
to qemu ignoring them I've opted just to skip formatting them.
Additionally with -blockdev support it will work as expected as the
image properties will be formatted when adding the image itself which is
not possible without it.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1651457

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-21 17:04:26 +01:00
Peter Krempa
a641e044c1 tests: qemuxml2argv: Add test case for empty CDROM with cache mode
Upcomming change will influence CDROM with cache mode so add a test
case.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-21 17:04:26 +01:00
Peter Krempa
caccbba64a qemu: capabilities: Always assume QEMU_CAPS_BOOTINDEX
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.

There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.

Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-09 17:00:54 +02:00
Peter Krempa
e5dce69a9c tests: qemuxml2argv: Unify testing of local cdroms
Test empty cdroms along with cdroms with medium.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-07-23 15:32:34 +02:00
Ján Tomko
53fa2edb62 qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT
Implied by QEMU >= 1.3.0.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-17 14:50:25 +02:00
Ján Tomko
5a41bd6df2 qemu: deprecate QEMU_CAPS_DISPLAY
Implied by QEMU >= 1.2.0.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-17 14:49:21 +02:00
Ján Tomko
84b40886f2 qemu: deprecate QEMU_CAPS_DUMP_GUEST_CORE
Implied by QEMU >= 1.2.0.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-17 14:35:09 +02:00
Ján Tomko
69420756b2 qemu: deprecate QEMU_CAPS_MACHINE_OPT
Implied by QEMU >= 1.2.0.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-17 14:24:09 +02:00
Ján Tomko
fe35b1ad64 qemu: deprecate QEMU_CAPS_NO_SHUTDOWN
Implied by QEMU >= 1.2.0.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-16 20:31:42 +02:00
Ján Tomko
470c3827cf qemu: deprecate QEMU_CAPS_RTC
Implied by QEMU >= 1.2.0.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-16 14:55:55 +02:00
Ján Tomko
cc32731a3c qemu: deprecate QEMU_CAPS_NO_USER_CONFIG
Implied by QEMU >= 1.2.0.

Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used
when QEMU_CAPS_NO_USER_CONFIG is unsupported.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-12 17:17:17 +02:00
Ján Tomko
a32539dea1 qemu: deprecate QEMU_CAPS_MONITOR_JSON
We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-04-12 17:17:17 +02:00
Michal Privoznik
ad24406440 tests: Drop qemuxml2argv- prefix for qemuxml2argv test cases
Similarly to the previous commit, rename .args files.

The files were renamed using the following commands. From
qemuxml2argvdata:

  for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done

and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:

  for i in $(find . -xtype l); do \
      ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
  done

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-12-05 07:32:08 +01:00