When LXC labels USB devices during hotplug, it is running in
host context, so it needs to pass in a vroot path to the
container root.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a network device's bridge connection is changed by
virDomainUpdateDevice, libvirt first removes the netdev's tap from its
old bridge, then adds it to the new bridge. Sometimes, due to a
network being destroyed while a guest device is still attached, the
tap may already be "removed" from the old bridge (or the old bridge
may not even exist any more); the existing code was needlessly failing
the update when this happened, making it impossible to recover from
the situation without completely detaching (i.e. removing) the netdev
from the guest and re-attaching.
Instead of failing the entire operation when removal of the tap from
the old bridge fails, this patch changes qemuDomainChangeNetBridge to
just log a warning and continue, allowing a reasonable recover from
the situation.
(you'll appreciate this change if you ever accidentally destroy a
network while your guests are still using it).
This fixes a problem that showed up during testing of:
https://bugzilla.redhat.com/show_bug.cgi?id=881480
Due to a logic error in the function that gets the name of the bridge
an interface connects to, any time a bridge was specified directly
(type='bridge') rather than indirectly (type='network'), An error
would be logged (although the operation would then complete
successfully):
Network type 6 is not supported
The final virReportError() in the function
qemuDomainNetGetBridgeName() was apparently avoided in the past with a
"goto cleanup" at the end of each case, but the case of bridge somehow
no longer has that final goto cleanup.
The proper solution is anyway to not rely on goto's, but put the error
log inside an else {} clause, so that it's executed only if the type
is neither bridge nor network (in reality, this function should only
ever be called for those two types, that's why this is an internal
error).
While making this change, the error message was also tuned to be more
correct (since it's not really the type of the network, but the type
of the interface, and it *is* otherwise supported, it's just that the
interface type in question doesn't *have* a bridge device associated
with it, or at least we don't know how to get it).
Since we can't (currently) rely on the ability to provide blanket
support for all possible network changes by calling the toplevel
netdev hostside disconnect/connect functions (due to qemu only
supporting a lockstep between initialization of host side and guest
side of devices), in order to support live change of an interface's
nwfilter we need to make a special purpose function to only call the
nwfilter teardown and setup functions if the filter for an interface
(or its parameters) changes. The pattern is nearly identical to that
used to change the bridge that an interface is connected to.
This patch was inspired by a request from Guido Winkelmann
<guido@sagersystems.de>, who tested an earlier version.
https://bugzilla.redhat.com/show_bug.cgi?id=876828
Commit 38c4a9cc introduced a regression in hot unplugging of disks
from qemu, where cgroup device ACLs were no longer being revoked
(thankfully not a security hole: cgroup ACLs only prevent open()
of the disk; so reverting the ACL prevents future abuse but doesn't
stop abuse from an fd that was already opened before the ACL change).
Commit 1b2ebf95 overlooked that there were two spots affected.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice):
Transfer backing chain before deletion.
* src/qemu/qemu_driver.c (qemuDomainDetachDeviceDiskLive): Fix
spacing (partly to ensure a different-looking patch).
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
https://bugzilla.redhat.com/show_bug.cgi?id=876828
Commit 38c4a9cc introduced a regression in hot unplugging of disks
from qemu, where cgroup device ACLs were no longer being revoked
(thankfully not a security hole: cgroup ACLs only prevent open()
of the disk; so reverting the ACL prevents future abuse but doesn't
stop abuse from an fd that was already opened before the ACL change).
The actual regression is due to a latent bug. The hot unplug code
was computing the set of files needing cgroup ACL revocation based
on the XML passed in by the user, rather than based on the domain's
details on which disk was being deleted. As long as the revoke
path was always recomputing the backing chain, this didn't really
matter; but now that we want to compute the chain exactly once and
remember that computation, we need to hang on to the backing chain
until after the revoke has happened.
* src/qemu/qemu_hotplug.c (qemuDomainDetachPciDiskDevice):
Transfer backing chain before deletion.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For now, disk migration via block copy job is not implemented in
libvirt. But when we do implement it, we have to deal with the
fact that qemu does not yet provide an easy way to re-start a qemu
process with mirroring still intact. Paolo has proposed an idea
for a persistent dirty bitmap that might make this possible, but
until that design is complete, it's hard to say what changes
libvirt would need. Even something like 'virDomainSave' becomes
hairy, if you realize the implications that 'virDomainRestore'
would be stuck with recreating the same mirror layout.
But if we step back and look at the bigger picture, we realize that
the initial client of live storage migration via disk mirroring is
oVirt, which always uses transient domains, and that if a transient
domain is destroyed while a mirror exists, oVirt can easily restart
the storage migration by creating a new domain that visits just the
source storage, with no loss in data.
We can make life a lot easier by being cowards for now, forbidding
certain operations on a domain. This patch guarantees that we
never get in a state where we would have to restart a domain with
a mirroring block copy, by preventing saves, snapshots, migration,
hot unplug of a disk in use, and conversion to a persistent domain
(thankfully, it is still relatively easy to 'virsh undefine' a
running domain to temporarily make it transient, run tests on
'virsh blockcopy', then 'virsh define' to restore the persistence).
Later, if the qemu design is enhanced, we can relax our code.
The change to qemudDomainDefine looks a bit odd for undoing an
assignment, rather than probing up front to avoid the assignment,
but this is because of how virDomainAssignDef combines both a
lookup and assignment into a single function call.
* src/conf/domain_conf.h (virDomainHasDiskMirror): New prototype.
* src/conf/domain_conf.c (virDomainHasDiskMirror): New function.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemudDomainDefine): Prevent dangerous
actions while block copy is already in action.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
to the extent that it can be resolved with current qemu functionality.
It attempts to detect as many situations as possible when the simple
operation of disconnecting an existing tap device from one bridge and
attaching it to another will satisfy the change requested in
virDomainUpdateDeviceFlags() for a network device. Before this patch,
that situation could only be detected if the pre-change interface
*and* the post-change interface definition were both "type='bridge'".
After this patch, it can also be detected if the before or after
interfaces are any combination of type='bridge' and type='network'
(the networks can be <forward mode='nat|route|bridge'>, as long as
they use a Linux host bridge and not macvtap connections).
This extra effort is especially useful since the recent discovery that
a netdev_del+netdev_add combo (to reconnect the network device with
completely different hostside configuration) doesn't work properly
with current qemu (1.2) unless it is accompanied by the matching
device_del+device_add - see this mailing list message for details:
http://lists.nongnu.org/archive/html/qemu-devel/2012-10/msg02355.html
(A slight modification of the patch referenced there has been prepared
to apply on top of this patch, but won't be pushed until qemu can be
made to work with it.)
* qemuDomainChangeNet needs access to the virDomainDeviceDef that
holds the new netdef (so that it can clear out the virDomainDeviceDef
if it ends up using the NetDef to replace the original), so the
virDomainNetDefPtr arg is replaced with a virDomainDeviceDefPtr.
* qemuDomainChangeNet previously checked for *some* changes to the
interface config, but this check was by no means complete. It was also
a bit disorganized.
This refactoring of the code is (I believe) complete in its check of
all NetDef attributes that might be changed, and either returns a
failure (for changes that are simply impossible), or sets one of three
flags:
needLinkStateChange - if the device link state needs to go up/down
needBridgeChange - if everything else is the same, but it needs
to be connected to a difference linux host
bridge
needReconnect - if the entire host side of the device needs
to be torn down and reconstructed (currently
non-working, as mentioned above)
Note that this function will refuse to make any change that requires
the *guest* side of the device to be detached (e.g. changing the PCI
address or mac address). Those would be disruptive enough to the guest
that it's reasonable to require an explicit detach/attach sequence
from the management application.
* As mentioned above, qemuDomainChangeNet also does its best to
understand when a simple change in attached bridge for the existing
tap device will work vs. the need to completely tear down/reconstruct
the host side of the device (including tap device).
This patch *does not* implement the "reconnect" code anyway - there is
a placeholder that turns that into an error. Rather, the purpose of
this patch is to replicate existing behavior with code that is ready
to have that functionality plugged in in a later patch.
* The expanded uses for qemuDomainChangeNetBridge meant that it needed
to be enhanced as well - it no longer replaces the original brname
string in olddev with the new brname; instead, it relies on the
caller to replace the *entire* olddev with newdev (since we've gone
to great lengths to assure they are functionally identical other
than the name of the bridge, this is now not only safe, but more
correct). Additionally, qemuDomainNetChangeBridge can now set the
bridge for type='network' interfaces as well as plain type='bridge'
interfaces. (Note that I had to make this change simultaneous to the
reorganization of qemuDomainChangeNet because the two are too
closely intertwined to separate).
All USB device lookup functions emit an error when they cannot find the
requested device. With this patch, their caller can choose if a missing
device is an error or normal condition.
The code which looks up a USB device specified by hostdev is duplicated
in two places. This patch creates a dedicated function that can be
called in both places.
Many parts of virDomainDefPtr were using 'int' variables as
array length counts. Replace all these with size_t and update
various format strings & API signatures to adapt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Disk hotplug is a two phase action: qemuMonitorAddDrive followed by
qemuMonitorAddDevice. When the first part succeeds but the second one
fails, we need to rollback the drive addition.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c
Refactoring existing code without causing any functional changes to
prepare for new code.
This patch makes the code reusable.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
virtPortProfile is now used by 4 different types of network devices
(NETWORK, BRIDGE, DIRECT, and HOSTDEV), and it's getting cumbersome to
replicate so much code in 4 different places just because each type
has the virtPortProfile in a slightly different place. This patch puts
a single virtPortProfile in a common place (outside the type-specific
union) in both virDomainNetDef and virDomainActualNetDef, and adjusts
the parse and format code (and the few other places where it is used)
accordingly.
Note that when a <virtualport> element is found, the parse functions
verify that the interface is of a type that supports one, otherwise an
error is generated (CONFIG_UNSUPPORTED in the case of <interface>, and
INTERNAL in the case of <actual>, since the contents of <actual> are
always generated by libvirt itself).
This patch adds the support to run the QEMU network helper
under unprivileged user. It also adds the support for
attach-interface option in virsh to run under unprivileged
user.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
* src/conf/domain_conf.c:
- Add virDomainControllerFind to find controller device by type
and index.
- Add virDomainControllerRemove to remove the controller device
from maintained controler list.
* src/conf/domain_conf.h:
- Declare the two new helpers.
* src/libvirt_private.syms:
- Expose private symbols for the two new helpers.
* src/qemu/qemu_driver.c:
- Support attach/detach controller device persistently
* src/qemu/qemu_hotplug.c:
- Use the two helpers to simplify the codes.
Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread. When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.
In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in. Syntax check to the rescue!
The syntax check can catch uses such as
virReportError(code,
_("split "
"string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.
This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.
* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Libvirt updates the configuration of SPICE server only when something
changes. This is unfortunate when the user wants to disconnect a
existing spice session when the connected attribute is already
"disconnect".
This patch modifies the conditions for calling the password updater to
be called when nothing changes, but the connected attribute is already
"disconnect".
The pciDevice structure corresponding to the device being hot-unplugged
was freed after it was "stolen" from activeList. The pointer was still
used for eg-inactive list. This patch removes the free of the structure
and frees it only if reset fails on the device.
If qemuPrepareHostdevUSBDevices fail it will roll back devices added
to the driver list of used devices. However, if it may fail because
the device is being used already. But then again - with roll back.
Therefore don't try to remove a usb device manually if the function
fail. Although, we want to remove the device if any operation
performed afterwards fail.
when failing to attach another usb device to a domain for some reason
which has one use device attached before, the libvirtd crashed.
The crash is caused by null-pointer dereference error in invoking
usbDeviceListSteal passed in NULL value usb variable.
commit 05abd1507d introduces the bug.
src/qemu/qemu_hostdev.c:
refactor qemuPrepareHostdevUSBDevices function, make it focus on
adding usb device to activeUsbHostdevs after check. After that,
the usb hotplug function qemuDomainAttachHostDevice also could use
it.
expand qemuPrepareHostUSBDevices to perform the usb search,
rollback on failure.
src/qemu/qemu_hotplug.c:
If there are multiple usb devices available with same vendorID and productID,
but with different value of "bus, device", we give an error to let user
use <address> to specify the desired one.
usbFindDevice():get usb device according to
idVendor, idProduct, bus, device
it is the exact match of the four parameters
usbFindDeviceByBus():get usb device according to bus, device
it returns only one usb device same as usbFindDevice
usbFindDeviceByVendor():get usb device according to idVendor,idProduct
it probably returns multiple usb devices.
usbDeviceSearch(): a helper function to do the actual search
Most of our errors complaining about an inability to support a
particular action due to qemu limitations used CONFIG_UNSUPPORTED,
but we had a few outliers. Reported by Jiri Denemark.
* src/qemu/qemu_command.c (qemuBuildDriveDevStr): Prefer
CONFIG_UNSUPPORTED.
* src/qemu/qemu_driver.c (qemuDomainReboot)
(qemuDomainBlockJobImpl): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciControllerDevice):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction)
(qemuMonitorBlockJob, qemuMonitorSystemWakeup): Likewise.
Originally, qemuDomainCheckEjectableMedia was entering monitor with qemu
driver lock. Commit 2067e31bf9, which I
made to fix that, revealed another issue we had (but didn't notice it
since the driver was locked): we didn't set nested job when
qemuDomainCheckEjectableMedia is called during migration. Thus the
original fix I made was wrong.
This patch was created to resolve this upstream bug:
https://bugzilla.redhat.com/show_bug.cgi?id=784767
and is at least a partial solution to this RHEL RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
Previously the only attribute of a network device that could be
modified by virUpdateDeviceFlags() ("virsh update-device") was the
link state; attempts to change any other attribute would log an error
and fail.
This patch adds recognition of a change in bridge device name, and
supports reconnecting the guest's interface to the new device.
Standard audit logs for detaching and attaching a network device are
also generated. Although the current auditing function doesn't log the
bridge being attached to, this will later be changed in a separate
patch.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This avoids possible deadlock of the qemu driver in case a domain is
begin migrated (in Begin phase) and unrelated connection to qemu driver
is closed at the right time.
I checked all callers of qemuDomainCheckEjectableMedia() and they are
calling this function with qemu driver locked.
In qemuDomainDetachNetDevice, detach was being used before it had been
validated. If no matching device was found, this resulted in a
dereference of a NULL pointer.
This behavior was a regression introduced in commit
cf90342be0, so it has not been a part of
any official libvirt release.
There are several functions in domain_conf.c that remove a device
object from the domain's list of that object type, but don't free the
object or return it to the caller to free. In many cases this isn't a
problem because the caller already had a pointer to the object and
frees it afterward, but in several cases the removed object was just
left floating around with no references to it.
In particular, the function qemuDomainDetachDeviceConfig() calls
functions to locate and remove net (virDomainNetRemoveByMac), disk
(virDomainDiskRemoveByName()), and lease (virDomainLeaseRemove())
devices, but neither it nor its caller qemuDomainModifyDeviceConfig()
ever obtain a pointer to the device being removed, much less free it.
This patch modifies the following "remove" functions to return a
pointer to the device object being removed from the domain device
arrays, to give the caller the option of freeing the device object
using that pointer if needed. In places where the object was
previously leaked, it is now freed:
virDomainDiskRemove
virDomainDiskRemoveByName
virDomainNetRemove
virDomainNetRemoveByMac
virDomainHostdevRemove
virDomainLeaseRemove
virDomainLeaseRemoveAt
The functions that had been leaking:
libxlDomainDetachConfig - leaked a virDomainDiskDef
qemuDomainDetachDeviceConfig - could leak a virDomainDiskDef,
a virDomainNetDef, or a
virDomainLeaseDef
qemuDomainDetachLease - leaked a virDomainLeaseDef
There were certain paths through the hostdev detach code that could
lead to the lower level function failing (and not removing the object
from the domain's hostdevs list), but the higher level function
free'ing the hostdev object anyway. This would leave a stale
hostdevdef pointer in the list, which would surely cause a problem
eventually.
This patch relocates virDomainHostdevRemove from the lower level
functions qemuDomainDetachThisHostDevice and
qemuDomainDetachHostPciDevice, to their caller
qemuDomainDetachThisHostDevice, placing it just before the call to
virDomainHostdevDefFree. This makes it easy to verify that either both
operations are done, or neither.
NB: The "dangling pointer" part of this problem was introduced in
commit 13d5a6, so it is not present in libvirt versions prior to
0.9.9. Earlier versions would return failure in certain cases even
though the the device object was removed/deleted, but the removal and
deletion operations would always both happen or neither.
These changes are applied only if the hostdev has a parent net device
(i.e. if it was defined as "<interface type='hostdev'>" rather than
just "<hostdev>"). If the parent netdevice has virtual port
information, the original virtualport associate functions are called
(these set and restore both mac and port profile on an
interface). Otherwise, only mac address is set on the device.
Note that This is only supported for SR-IOV Virtual Functions (not for
standard PCI or USB netdevs), and virtualport association is only
supported for 802.1Qbh. For all other types of cards and types of
virtualport, a "Config Unsupported" error is returned and the
operation fails.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
qemuDomainAttachNetDevice
- re-ordered some things at start of function because
networkAllocateActualDevice should always be run and a slot
in def->nets always allocated, but host_net_add isn't needed
if the actual type is hostdev.
- if actual type is hostdev, defer to
qemuDomainAttachHostDevice (which will reach up to the NetDef
for things like MAC address when necessary). After return
from qemuDomainAttachHostDevice, slip directly to cleanup,
since the rest of the function is specific to emulated net
devices.
- put assignment of new NetDef into expanded def->nets down
below cleanup: (but only on success) since it is also needed
for emulated and hostdev net devices.
qemuDomainDetachHostDevice
- after locating the exact device to detach, check if it's a
network device and, if so, use toplevel
qemuDomainDetachNetDevice instead so that the def->nets list
is properly updated, and 'actual device' properly returned to
network pool if appropriate. Otherwise, for normal hostdevs,
call the lower level qemuDomainDetachThisDevice.
qemuDomainDetachNetDevice
- This is where it gets a bit tricky. After locating the device
on the def->nets list, if the network device type == hostdev,
call the *lower level* qemuDomainDetachThisDevice (which will
reach back up to the parent net device for MAC address /
virtualport when appropriate, then clear the device out of
def->hostdevs) before skipping past all the emulated
net-device-specific code to cleanup:, where the network
device is removed from def->nets, and the network device
object is freed.
In short, any time a hostdev-type network device is detached, we must
go through the toplevel virDomaineDetachNetDevice function first and
last, to make sure 1) the def->nnets list is properly managed, and 2)
any device allocated with networkAllocateActualDevice is properly
freed. At the same time, in the middle we need to go through the
lower-level vidDomainDetach*This*HostDevice to be sure that 1) the
def->hostdevs list is properly managed, 2) the PCI device is properly
detached from the guest and reattached to the host (if appropriate),
and 3) any higher level teardown is called at the appropriate time, by
reaching back up to the NetDef config (part (3) will be covered in a
separate patch).
This refactoring is necessary to support hotplug detach of
type=hostdev network devices, but needs to be in a separate patch to
make potential debugging of regressions more practical.
Rather than the lowest level functions searching for a matching
device, the search is now done in the toplevel function, and an
intermediate-level function (qemuDomainDetachThisHostDevice()), which
expects that the device's entry is already found, is called (this
intermediate function will be called by qemuDomainDetachNetDevice() in
order to support detach of type=hostdev net devices)
This patch should result in 0 differences in functionality.
In order to allow for a virDomainHostdevDef that uses the
virDomainDeviceInfo of a "higher level" device (such as a
virDomainNetDef), this patch changes the virDomainDeviceInfo in the
HostdevDef into a virDomainDeviceInfoPtr. Rather than adding checks
all over the code to check for a null info, we just guarantee that it
is always valid. The new function virDomainHostdevDefAlloc() allocates
a virDomainDeviceInfo and plugs it in, and virDomainHostdevDefFree()
makes sure it is freed.
There were 4 places allocating virDomainHostdevDefs, all of them
parsers of one sort or another, and those have all had their
VIR_ALLOC(hostdev) changed to virDomainHostdevDefAlloc(). Other than
that, and the new functions, all the rest of the changes are just
mechanical removals of "&" or changing "." to "->".
There will be cases where the iterator callback will need to know the
type of the device whose info is being operated on, and possibly even
need to use some of the device's config. This patch adds a
virDomainDeviceDefPtr to the args of every callback, and fills it in
appropriately as the devices are iterated through.
The virDomainDeviceInfoPtrs in qemuCollectPCIAddress and
qemuComparePCIDevice are named "dev" and "dev1", but those functions
will be changed (in order to match a change in the args sent to
virDomainDeviceInfoIterate() callback args) to contain a
virDomainDeviceDefPtr device.
This patch renames "dev" to "info" (and "dev[n]" to "info[n]") to
avoid later confusion.
For any disk controller model which is not "lsilogic", the command
line will be like:
-drive file=/dev/sda,if=none,id=drive-scsi0-0-3-0,format=raw \
-device scsi-disk,bus=scsi0.0,channel=0,scsi-id=3,lun=0,i\
drive=drive-scsi0-0-3-0,id=scsi0-0-3-0
The relationship between the libvirt address attrs and the qdev
properties are (controller model is not "lsilogic"; strings
inside <> represent libvirt adress attrs):
bus=scsi<controller>.0
channel=<bus>
scsi-id=<target>
lun=<unit>
* src/qemu/qemu_command.h: (New param "virDomainDefPtr def"
for function qemuBuildDriveDevStr; new param "virDomainDefPtr
vmdef" for function qemuAssignDeviceDiskAlias. Both for
virDomainDiskFindControllerModel's use).
* src/qemu/qemu_command.c:
- New param "virDomainDefPtr def" for qemuAssignDeviceDiskAliasCustom.
For virDomainDiskFindControllerModel's use, if the disk bus is "scsi"
and the controller model is not "lsilogic", "target" is one part of
the alias name.
- According change on qemuAssignDeviceDiskAlias and qemuBuildDriveDevStr
* src/qemu/qemu_hotplug.c:
- Changes to be consistent with declarations of qemuAssignDeviceDiskAlias
qemuBuildDriveDevStr, and qemuBuildControllerDevStr.
* tests/qemuxml2argvdata/qemuxml2argv-pseries-vio-user-assigned.args,
tests/qemuxml2argvdata/qemuxml2argv-pseries-vio.args: Update the
generated command line.
In qemuDomainAttachNetDevice, the guest's tap interface has only been
attached to the bridge if iface_connected is true. It's possible for
an error to occur prior to that happening, and previously we would
attempt to remove the tap interface from the bridge even if it hadn't
been attached.
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
QEMU always sends details about all available block devices as an answer
for "info block"/"query-block" command. On the other hand, our
qemuMonitorGetBlockInfo was made for a single block devices queries
only. Thus, when asking for multiple devices, we asked qemu multiple
times to always get the same answer from which different parts were
filtered. This patch makes qemuMonitorGetBlockInfo return a hash table
of all block devices, which may later be used for getting details about
specific devices.
pciTrySecondaryBusReset checks if there is active device on the
same bus, however, qemu driver doesn't maintain an effective
list for the inactive devices, and it passes meaningless argument
for parameter "inactiveDevs". e.g. (qemuPrepareHostdevPCIDevices)
if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
return -1;
..skipped...
if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
goto reattachdevs;
NB, the "pcidevs" used above are extracted from domain def, and
thus one won't be able to attach a device of which bus has other
device even detached from host (nodedev-detach). To see more
details of the problem:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=773667
This patch is to resolve the problem by introducing an inactive
PCI device list (just like qemu_driver->activePciHostdevs), and
the whole logic is:
* Add the device to inactive list during nodedev-dettach
* Remove the device from inactive list during nodedev-reattach
* Remove the device from inactive list during attach-device
(for non-managed device)
* Add the device to inactive list after detach-device, only
if the device is not managed
With the above, we have a sufficient inactive PCI device list, and thus
we can use it for pciResetDevice. e.g.(qemuPrepareHostdevPCIDevices)
if (pciResetDevice(dev, driver->activePciHostdevs,
driver->inactivePciHostdevs) < 0)
goto reattachdevs;
When sVirt is integrated with the LXC driver, it will be neccessary
to invoke the security driver APIs using only a virDomainDefPtr
since the lxc_container.c code has no virDomainObjPtr available.
Aside from two functions which want obj->pid, every bit of the
security driver code only touches obj->def. So we don't need to
pass a virDomainObjPtr into the security drivers, a virDomainDefPtr
is sufficient. Two functions also gain a 'pid_t pid' argument.
* src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/security/security_apparmor.c,
src/security/security_dac.c,
src/security/security_driver.h,
src/security/security_manager.c,
src/security/security_manager.h,
src/security/security_nop.c,
src/security/security_selinux.c,
src/security/security_stack.c: Change all security APIs to use a
virDomainDefPtr instead of virDomainObjPtr
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.
As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.
device='lun' is identical to the default device='disk', except that:
1) It is only allowed if bus='virtio', type='block', and the qemu
version is "new enough" to support it ("new enough" == qemu 0.11 or
better), otherwise the domain will fail to start and a
CONFIG_UNSUPPORTED error will be logged).
2) The option "scsi=on" will be added to the -device arg to allow
SG_IO commands (if device !='lun', "scsi=off" will be added to the
-device arg so that SG_IO commands are specifically forbidden).
Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.
*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter
*src/qemu/qemu_(command|driver|hotplug).c - treat
VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.
Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=638633
Although scripts are not used by interfaces of type other than
"ethernet" in qemu, due to the fact that the parser stores the script
name in a union that is only valid when type is ethernet or bridge,
there is no way for anyone except the parser itself to catch the
problem of specifying an interface script for an inappropriate
interface type (by the time the parsed data gets back to the code that
called the parser, all evidence that a script was specified is
forgotten).
Since the parser itself should be agnostic to which type of interface
allows scripts (an example of why: a script specified for an interface
of type bridge is valid for xen domains, but not for qemu domains),
the solution here is to move the script out of the union(s) in the
DomainNetDef, always populate it when specified (regardless of
interface type), and let the driver decide whether or not it is
appropriate.
Currently the qemu, xen, libxml, and uml drivers recognize the script
parameter and do something with it (the uml driver only to report that
it isn't supported). Those drivers have been updated to log a
CONFIG_UNSUPPORTED error when a script is specified for an interface
type that's inappropriate for that particular hypervisor.
(NB: There was earlier discussion of solving this problem by adding a
VALIDATE flag to all libvirt APIs that accept XML, which would cause
the XML to be validated against the RNG files. One statement during
that discussion was that the RNG shouldn't contain hypervisor-specific
things, though, and a proper solution to this problem would require
that (again, because a script for an interface of type "bridge" is
accepted by xen, but not by qemu).
Currently, on device detach, we parse given XML, find the device
in domain object, free it and try to restore security labels.
However, in some cases (e.g. usb hostdev) parsed XML contains
less information than freed device. In usb case it is bus & device
IDs. These are needed during label restoring as a symlink into
/dev/bus is generated from them. Therefore don't drop device
configuration until security labels are restored.
This patch fixes two problems:
1) The device will be reattached to host even if it's not
managed, as there is a "pciDeviceSetManaged".
2) The device won't be reattached to host with original
driver properly. As it doesn't honor the device original
properties which are maintained by driver->activePciHostdevs.
Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile
To make way for renaming the other macvlan creation APIs in
interface.c
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
Rename APIs
Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers
* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
paths & remove conditional compilation
In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns
virNetDevMacVLanXXXXX - macvlan/macvtap interface management
virNetDevVPortProfileXXXX - virtual port profile management
* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_command.h,
src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/qemu/qemu_process.h: Update for renamed APIs
Rename the virVirtualPortProfileParams struct to be
virNetDevVPortProfile, and rename the APIs to match
this prefix.
* src/util/network.c, src/util/network.h: Rename port profile
APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c, src/qemu/qemu_hotplug.c,
src/util/macvtap.c, src/util/macvtap.h: Update for
renamed APIs/structs
The qemu RBD driver needs access to the conn in order to get the secret
needed for connecting to the ceph cluster.
Signed-off-by: Sage Weil <sage@newdream.net>
Detected by Coverity. The fix in 2c27dfa didn't catch all bad
instances of memcpy(). Thankfully, on further analysis, all of
the problematic uses are only triggered by old qemu that lacks
-device.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciDiskDevice)
(qemuDomainAttachNetDevice, qemuDomainAttachHostPciDevice): Init
all fields since monitor only populates some of them.
Detected by Coverity. Both text and JSON monitors set only the
bus and unit fields, which means driveAddr.controller spends
life as garbage on the stack, and is then memcpy()'d into the
in-memory representation which the user can see via dumpxml.
* src/qemu/qemu_hotplug.c (qemuDomainAttachSCSIDisk): Only copy
defined fields.
When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.
How to reproduce:
1) Define two domains with same PCI device defined in the confs.
2) # virsh start domain1
3) # virsh start domain2
4) # virsh nodedev-reattach $pci_device
You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).
This patch is to prohibit the bug by:
1) Prohibit a domain starting or device attachment right at
preparation period (qemuPrepareHostdevPCIDevices) if the
device is in list driver->activePciHostdevs, which means
it's used by other domain.
2) Introduces a new field for struct _pciDevice, (const char *used_by),
it will be set as the domain name at preparation period,
(qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
the device from driver->activePciHostdevs if it's still used by
other domain when stopping the domain process.
* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
changed)
Signed-off-by: Eric Blake <eblake@redhat.com>
If the daemon is restarted so we reconnect to monitor, cdrom media
can be ejected. In that case we don't want to show it in domain xml,
or require it on migration destination.
To check for disk status use 'info block' monitor command.
This patch enables modifying network device configuration using the
virUpdateDeviceFlags API method. Matching of devices is accomplished
using MAC addresses.
While updating live configuration of a running domain, the user is
allowed only to change link state of the interface. Additional
modifications may be added later. For now the code checks for
unsupported changes and thereafter changes the link state, if
applicable.
When updating persistent configuration of guest's network interface the
whole configuration (except for the MAC address) may be modified and
is stored for the next startup.
* src/qemu/qemu_driver.c - Add dispatching of virUpdateDevice for
network devices update (live/config)
* src/qemu/qemu_hotplug.c - add setting of initial link state on live
device addition
- add function to change network device
configuration. By now it supports only
changing of link state
* src/qemu/qemu_hotplug.h - Headers to above functions
* src/qemu/qemu_process.c - set link states before virtual machine
start. Qemu does not support setting of
this on the command line.
Snapshots alter the set of disk image files opened by qemu, so
they must be audited. But they don't involve a full disk definition
structure, just the new filename. Make the next patch easier by
refactoring the audit routines to just operate on file name.
* src/conf/domain_audit.h (virDomainAuditDisk): Update prototype.
* src/conf/domain_audit.c (virDomainAuditDisk): Act on strings,
not definition structures.
(virDomainAuditStart): Update caller.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia)
(qemuDomainAttachPciDiskDevice, qemuDomainAttachSCSIDisk)
(qemuDomainAttachUsbMassstorageDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachDiskDevice):
Likewise.
Otherwise the device will still be bound to pci-stub driver even
it's set as "managed=yes" when do detaching. Of course, it won't
triger any driver reprobing too.
Currently, we attempt to run sync job and async job at the same time. It
means that the monitor commands for two jobs can be run in any order.
In the function qemuDomainObjEnterMonitorInternal():
if (priv->job.active == QEMU_JOB_NONE && priv->job.asyncJob) {
if (qemuDomainObjBeginNestedJob(driver, obj) < 0)
We check whether the caller is an async job by priv->job.active and
priv->job.asynJob. But when an async job is running, and a sync job is
also running at the time of the check, then priv->job.active is not
QEMU_JOB_NONE. So we cannot check whether the caller is an async job
in the function qemuDomainObjEnterMonitorInternal(), and must instead
put the burden on the caller to tell us when an async command wants
to do a nested job.
Once the burden is on the caller, then only async monitor enters need
to worry about whether the VM is still running; for sync monitor enter,
the internal return is always 0, so lots of ignore_value can be dropped.
* src/qemu/THREADS.txt: Reflect new rules.
* src/qemu/qemu_domain.h (qemuDomainObjEnterMonitorAsync): New
prototype.
* src/qemu/qemu_process.h (qemuProcessStartCPUs)
(qemuProcessStopCPUs): Add parameter.
* src/qemu/qemu_migration.h (qemuMigrationToFile): Likewise.
(qemuMigrationWaitForCompletion): Make static.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal): Add
parameter.
(qemuDomainObjEnterMonitorAsync): New function.
(qemuDomainObjEnterMonitor, qemuDomainObjEnterMonitorWithDriver):
Update callers.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemudDomainCoreDump, doCoreDump, processWatchdogEvent)
(qemudDomainSuspend, qemudDomainResume, qemuDomainSaveImageStartVM)
(qemuDomainSnapshotCreateActive, qemuDomainRevertToSnapshot):
Likewise.
* src/qemu/qemu_process.c (qemuProcessStopCPUs)
(qemuProcessFakeReboot, qemuProcessRecoverMigration)
(qemuProcessRecoverJob, qemuProcessStart): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationToFile)
(qemuMigrationWaitForCompletion, qemuMigrationUpdateJobStatus)
(qemuMigrationJobStart, qemuDomainMigrateGraphicsRelocate)
(doNativeMigrate, doTunnelMigrate, qemuMigrationPerformJob)
(qemuMigrationPerformPhase, qemuMigrationFinish)
(qemuMigrationConfirm): Likewise.
* src/qemu/qemu_hotplug.c: Drop unneeded ignore_value.
The domain XML now understands the <listen> subelement of its
<graphics> element (including when listen type='network'), and the
network driver has an internal API that will turn a network name into
an IP address, so the final logical step is to put the glue into the
qemu driver so that when it is starting up a domain, if it finds
<listen type='network' network='xyz'/> in the XML, it will call the
network driver to get an IPv4 address associated with network xyz, and
tell qemu to listen for vnc (or spice) on that address rather than the
default address (localhost).
The motivation for this is that a large installation may want the
guests' VNC servers listening on physical interfaces rather than
localhost, so that users can connect directly from the outside; this
requires sending qemu the appropriate IP address to listen on. But
this address will of course be different for each host, and if a guest
might be migrated around from one host to another, it's important that
the guest's config not have any information embedded in it that is
specific to one particular host. <listen type='network.../> can solve
this problem in the following manner:
1) on each host, define a libvirt network of the same name,
associated with the interface on that host that should be used
for listening (for example, a simple macvtap network: <forward
mode='bridge' dev='eth0'/>, or host bridge network: <forward
mode='bridge'/> <bridge name='br0'/>
2) in the <graphics> element of each guest's domain xml, tell vnc to
listen on the network name used in step 1:
<graphics type='vnc' port='5922'>
<listen type='network'network='example-net'/>
</graphics>
(all the above also applies for graphics type='spice').
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.
* docs/schemas/domain.rng: updated to allow the <listen> element
* docs/formatdomain.html.in: document the <listen> element and its
attributes.
* src/conf/domain_conf.[hc]:
1) The domain parser, formatter, and data structure are modified to
support 0 or more <listen> subelements to each <graphics>
element. The old style "legacy" listen attribute is also still
accepted, and will be stored internally just as if it were a
separate <listen> element. On output (i.e. format), the address
attribute of the first <listen> element of type 'address' will be
duplicated in the legacy "listen" attribute of the <graphic>
element.
2) The "listenAddr" attribute has been removed from the unions in
virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
This attribute is now in the <listen> subelement (aka
virDomainGraphicsListenDef)
3) Helper functions were written to provide simple access
(both Get and Set) to the listen elements and their attributes.
* src/libvirt_private.syms: export the listen helper functions
* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c
Modify all these files to use the listen helper functions rather
than directly referencing the (now missing) listenAddr
attribute. There can be multiple <listen> elements to a single
<graphics>, but the drivers all currently only support one, so all
replacements of direct access with a helper function indicate index
"0".
* tests/* - only 3 of these are new files added explicitly to test the
new <listen> element. All the others have been modified to reflect
the fact that any legacy "listen" attributes passed in to the domain
parse will be saved in a <listen> element (i.e. one of the
virDomainGraphicsListenDefs), and during the domain format function,
both the <listen> element as well as the legacy attributes will be
output.
The network driver needs to assign physical devices for use by modes
that use macvtap, keeping track of which physical devices are in use
(and how many instances, when the devices can be shared). Three calls
are added:
networkAllocateActualDevice - finds a physical device for use by the
domain, and sets up the virDomainActualNetDef accordingly.
networkNotifyActualDevice - assumes that the domain was already
running, but libvirtd was restarted, and needs to be notified by each
already-running domain about what interfaces they are using.
networkReleaseActualDevice - decrements the usage count of the
allocated physical device, and frees the virDomainActualNetDef to
avoid later accidentally using the device.
bridge_driver.[hc] - the new APIs. When WITH_NETWORK is false, these
functions are all #defined to be "0" in the .h file (effectively
becoming a NOP) to prevent link errors.
qemu_(command|driver|hotplug|process).c - add calls to the above APIs
in the appropriate places.
tests/Makefile.am - we need to include libvirt_driver_network.la
whenever libvirt_driver_qemu.la is linked, to avoid unreferenced
symbols (in functions that are never called by the test
programs...)
The qemu driver accesses fields in the virDomainNetDef directly, but
with the advent of the virDomainActualNetDef, some pieces of
information may be found in a different place (the ActualNetDef) if
the network connection is of type='network' and that network is of
forward type='bridge|private|vepa|passthrough'. The previous patch
added functions to mask this difference from callers - they hide the
decision making process and just pick the value from the proper place.
This patch uses those functions in the qemu driver as a first step in
making qemu work with the new network types. At this point, the
virDomainActualNetDef is guaranteed always NULL, so the GetActualX()
function will return exactly what the def->X that's being replaced
would have returned (ie bisecting is not compromised).
There is one place (in qemu_driver.c) where the internal details of
the NetDef are directly manipulated by the code, so the GetActual
functions cannot be used there without extra additional code; that
file will be treated in a separate patch.
The virtPortProfile in the domain interface struct is now a separately
allocated object *pointed to by* (rather than contained in) the main
virDomainNetDef object. This is done to make it easier to figure out
when a virtualPortProfile has/hasn't been specified in a particular
config.
When monitor is entered with qemuDomainObjEnterMonitorWithDriver, the
correct method for leaving and unlocking the monitor is
qemuDomainObjExitMonitorWithDriver.
Query commands are safe to be called during long running jobs (such as
migration). This patch makes them all work without the need to
special-case every single one of them.
The patch introduces new job.asyncCond condition and associated
job.asyncJob which are dedicated to asynchronous (from qemu monitor
point of view) jobs that can take arbitrarily long time to finish while
qemu monitor is still usable for other commands.
The existing job.active (and job.cond condition) is used all other
synchronous jobs (including the commands run during async job).
Locking schema is changed to use these two conditions. While asyncJob is
active, only allowed set of synchronous jobs is allowed (the set can be
different according to a particular asyncJob) so any method that
communicates to qemu monitor needs to check if it is allowed to be
executed during current asyncJob (if any). Once the check passes, the
method needs to normally acquire job.cond to ensure no other command is
running. Since domain object lock is released during that time, asyncJob
could have been started in the meantime so the method needs to recheck
the first condition. Then, normal jobs set job.active and asynchronous
jobs set job.asyncJob and optionally change the list of allowed job
groups.
Since asynchronous jobs only set job.asyncJob, other allowed commands
can still be run when domain object is unlocked (when communicating to
remote libvirtd or sleeping). To protect its own internal synchronous
commands, the asynchronous job needs to start a special nested job
before entering qemu monitor. The nested job doesn't check asyncJob, it
only acquires job.cond and sets job.active to block other jobs.
