We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element. This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Trying to define a domain name containing an embedded '/'
will immediately fail when trying to write the XML to disk for
our stateful drivers. This patch explicitly rejects names
containing a '/', and provides an xmlopt feature for drivers
to avoid this validation check, which is enabled in every
non-stateful driver that already has xmlopt handling wired up.
(Technically this could reject a previously accepted vmname like
'/foo', however at least for the qemu driver that falls over
later when starting qemu)
https://bugzilla.redhat.com/show_bug.cgi?id=639923
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type. The new function will auto-expand the listens array
and append a new listen.
The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen. The two remaining uses can access the
listen structure directly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
To avoid having to forbid new features added to domain XML in post parse
callbacks for individual hypervisor drivers the feature flag mechanism
will allow to add a central check that will be disabled for the drivers
that will add support.
As a first example flag, the 'hasWideSCSIBus' is converted to the new
bitmap.
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Tool such as libguestfs need the datacenter path to get access to disk
images. The ESX driver knows the correct datacenter path, but this
information cannot be accessed using libvirt API yet. Also, it cannot
be deduced from the connection URI in a robust way.
Expose the datacenter path in the domain XML as <vmware:datacenterpath>
node similar to the way the <qemu:commandline> node works. The new node
is ignored while parsing the domain XML. In contrast to <qemu:commandline>
it is output only.
https://bugzilla.redhat.com/show_bug.cgi?id=1210587 (completed)
When generating the default drive address for a SCSI <disk> device,
check the generated address to ensure it doesn't conflict with a SCSI
<hostdev> address. The <disk> address generation algorithm uses the
<target> "dev" name in order to determine which controller and unit
in order to place the device. Since a SCSI <hostdev> device doesn't
require a target device name, its placement on the guest SCSI address
"could" conflict. For instance, if a SCSI <hostdev> exists at
controller=0 unit=0 and an attempt to hotplug 'sda' into the guest
made, there would be a conflict if the <hostdev> is already using
/dev/sda.
Although defined the same way, fortunately there hadn't been any deviation.
Ensure any assignments to onCrash use VIR_DOMAIN_LIFECYCLE_CRASH_* defs and
not VIR_DOMAIN_LIFECYCLE_* defs
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
VMware ESX does not always set the "serialX.fileType" tag in VMX files. The
default value for this tag is "device", and when adding a new serial port
of this type VMware will omit the fileType tag. This caused libvirt to
fail to parse the VMX file. Fixed by making this tag optional and using
"device" as a default value. Also updated vmx2xmltest to test for this
case.
Signed-off-by: Eric Blake <eblake@redhat.com>
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
The original implementation of the VMX config parser assumed that the
virtualHW.version would have more influence on the content of the VMX
file than it actually seems to have. It started with accepting only
version 4. Additonal versions were added later without any additional
changes in the parser itself. This suggests that the influence of the
virtualHW.version on the content and format of the VMX file is small
or non-existent.
The parser worked without any changes across several virtualHW and
vSphere versions. So instead of adding new virtualHW.version values to
the parser as they come along, or adding an extra flag to allow unknown
virtualHW.version values just relax the check to require version 4 or
later.
A future patch wants to create disk definitions with non-zero
default contents; to avoid crashes, all callers that allocate
a disk definition should go through a common point.
I found allocation points by looking for any code that increments
ndisks, as well as any matches for ALLOC.*disk. Most places that
modified ndisks were covered by the parse from XML to domain/device
definition by initial domain creation or device hotplug; I also
hand-checked all drivers that generate a device struct on the
fly during getXMLDesc.
* src/conf/domain_conf.h (virDomainDiskDefNew): New prototype.
* src/conf/domain_conf.c (virDomainDiskDefNew): New function.
(virDomainDiskDefParseXML): Use it.
* src/parallels/parallels_driver.c (parallelsAddHddInfo):
Likewise.
* src/qemu/qemu_command.c (qemuParseCommandLine): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/vmx/vmx.c (virVMXParseDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
Part of a series of cleanups to use new accessor methods.
* src/vmx/vmx.c (virVMXHandleLegacySCSIDiskDriverName)
(virVMXParseDisk, virVMXFormatDisk, virVMXFormatFloppy): Use
accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.
Found by:
git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
vmx/vmx.c ignores the transient attribute on the disk xml format. This patch
adds a 1-1 relationship between it and [disk].mode = "independent-nonpersistent".
The other modes are ignored as before. It works in my testing.
https://bugzilla.redhat.com/show_bug.cgi?id=1044023
Signed-off-by: Eric Blake <eblake@redhat.com>
The vmx file parsing code was reporting errors when parsing floppy.fileName
entries if the filename didn't end in .flp. There is no such restriction in
ESX; even using the GUI to configure floppy filenames you can specify any
arbitrary file with any extension.
Fix by changing the vmx parsing code so that it uses the floppy.fileType
value to determine whether floppy.fileName refers to a block device or a
regular file.
Also remove code that would have generated an error if no floppy.fileName
was specified. This is not an error either.
Updated the floppy tests in vmx2xmltest.c and xml2vmxtest.c.
The virVMXFormatConfig called virVMXEscapeHexPipe but
forgot to check for OOM. This caused data to silently
be lost.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
