The virJSONValueArraySize() function return ssize_t (with
possibly returning -1 if the passed json is not an array).
Storing the return value into size_t is possibly dangerous then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Call the vcpu thread info validation separately to decrease complexity
of returned values by qemuDomainRefreshVcpuInfo.
This function now returns 0 on success and -1 on error. Certain
failures of qemu to report data are still considered as success. Any
error reported now is fatal.
Validate the presence of the thread id according to state of the vCPU
rather than just checking the vCPU count. Additionally put the new
validation code into a separate function so that the information
retrieval can be split from the validation.
Long, long ago before libxl_get_required_shadow_memory() was
made publicly available, its code was copied to the libxl driver
for calculating shadow memory requirements of HVM domains.
Long ago, libxl_get_required_shadow_memory() was exported in
libxl_utils.h and included in xen-devel packages everywhere.
Remove the copied code, which has become stale, and let libxl
provode a proper shadow memory value.
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add support for IOThread quota/bandwidth and period parameters for non
session mode. If in session mode, then error out. Uses all the same
places where {vcpu|emulator|global}_{period|quota} are adjusted and
adds the iothread values.
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
If you invoke virDomainLxcEnterSecurityLabel() on security
model of "none" it will report an error. Logically a "none"
security model should be treated as a no-op, so we should
just return success immediately, instead of an error.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1289391
Rather than pass the whole drive string (which contained the alias),
pass only the alias for the qemuMonitorDriveDel call in the error
path when adding a host device in the monitor fails.
Partial fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=1336225
Similar to the other disk types, add the qemuMonitorDriveDel in the failure
to add/hotplug a USB.
Added a couple of other formatting changes just to have a less cluttered look
Move QEMU_DRIVE_HOST_PREFIX into the qemu_alias.c to dissuade future
callers from using it. Create qemuAliasDiskDriveSkipPrefix in order
to handle the current consumers that desire to check if an alias has
the drive- prefix and "get beyond it" in order to get the disk alias.
Since we already have a function that will generate the drivestr from
the alias, let's use it and remove the qemuDeviceDriveHostAlias.
Move the QEMU_DRIVE_HOST_PREFIX definition into qemu_alias.h
Also alter qemuAliasFromDisk to use the QEMU_DRIVE_HOST_PREFIX instead
of "drive-%s".
Rather than pass the disks[i]->info.alias to qemuMonitorSetDrivePassphrase
and then generate the "drive-%s" alias from that, let's use qemuAliasFromDisk
prior to the call to generate the drive alias and then pass that along
thus removing the need to generate the alias from the monitor code.
Node device lifecycle event API entry points for registering and
deregistering node deivce events, as well as types of events
associated with node device.
These entry points will be used for implementing asynchronous
lifecycle events.
Node device API:
virConnectNodeDeviceEventRegisterAny
virConnectNodeDeviceEventDeregisterAny
virNodeDeviceEventLifecycleType which has events CREATED and DELETED
As commit id 'e2b86f580' notes, when mode=agent possibly setting the
fake reboot flag to true wouldn't be necessary; however, it doesn't
"force" the issue by just ensuring the fake reboot is false, so this
patch adds the explicit setting for the reboot path.
More investigation and details can be found in commit id '8be502fd'
as well as in the archives at:
https://www.redhat.com/archives/libvir-list/2015-April/msg00715.html
Conditional setting of the fake reboot flag should only happen for
the acpi mode shutdown path; however, for the agent mode shutdown,
the fake reboot should be cleared. This patch will essentially revert
commit id '8be502fd', but adds an explicit setting of the flag to false
when using mode=agent while also only conditionally setting the reboot
flag if the guest went away. This also avoids an issue where a shutdown
with reboot semantics is done from agent mode which sets the reboot
flag followed by a shutdown from within the guest which would result
in a reboot due to the fake reboot flag being set. The change will
also properly handle the cases described in the following archive post:
https://www.redhat.com/archives/libvir-list/2015-April/msg00715.html
Commit id '44304c6eb' added the API libxlDomainAttachControllerDevice
inside a conditional LIBXL_HAVE_PVUSB, but called that function outside
the conditional in libxlDomainAttachDeviceLive.
Similarly, the API libxlDomainDetachControllerDevice was added inside a
conditional LIBXL_HAVE_PVUSB, but called outside the conditional in
libxlDomainDetachDeviceLive.
This patch adds the conditional LIBXL_HAVE_PVUSB around those two calls
from within the switch.
Prior to commit 2737aaaf, we allowed every client to connect successfully,
however, if accepting a client would eventually lead to an overcommit of the
limits, we would disconnect it immediately with "Too many active clients,
dropping connection from...". Recent changes refactored the code in a way, that
it is not possible for the client-related callback to be dispatched and the
client to be accepted if the limits wouldn't permit to do so, therefore a check
if a connection should be dropped due to limits violation has become a dead
code that could be removed.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit 2737aaaf changed our policy for accepting new clients in a way, that
instead of accepting new clients only to disconnect them immediately, since
that would overcommit the limit, we temporarily disable polling for the
dedicated file descriptor, so any new connection will queue on the socket.
Commit 8b1f0469 then added the possibility to change the limits during runtime
but it didn't re-enable polling for the previously disabled file descriptor,
thus any new connection would still continue to queue on the socket. This patch
forces an update of the services each time the limits were changed in some way.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357776
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So far, virNetServerCheckLimits was only used to possibly re-enable accepting
new clients that might have previously been disabled due to client limits
violation (max_clients, max_anonymous_clients). This patch refactors
virNetServerAddClient, which is currently the only place where the services get
disabled, in order to use the virNetServerCheckLimits helper instead of
checking the limits by itself.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since virNetServerAddClient checks for the limits in order to temporarily
suspend the services, thus not accepting any more clients, there is no reason
why virNetServerCheckLimits, which is only responsible for re-enabling
previously disabled services according to the limits, could not do both. To be
able to do that however, it needs to be moved up in the file since it's static
(and because it's just a helper and there's only one caller it should remain
static).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In case of error, libxlReconnectDomain may call
virDomainObjListRemoveLocked. However it has no local reference on
the domain object, leading to segfault. Get a reference to the domain
object at the start of the function and release it at the end to avoid
problems.
This commit also factorizes code between the error and normal ends.
To sync with virDomainControllerModelUSB, we add two models
in qemuControllerModelUSB 'qusb1' and 'qusb2', but those
models are not supported in qemu driver. So add check in
device post parse to report errors if 'qusb1' and 'qusb2'
are specified.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
libxl configuration files conversion can now handle USB controllers.
When parting libxl config file, USB controllers with type PV are
ignored as those aren't handled.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When hotplugging a USB device, check if there is an available controller
and port, if not, automatically create a USB controller of version
2.0 and 8 ports.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Support USB controller hot-plug and hot-unplug.
#virsh attach-device dom usbctrl.xml
#virsh detach-device dom usbctrl.xml
usbctrl.xml example:
<controller type='usb' index='0' model='qusb2'>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
To support USB Controller in xen guest domains, just add
USB controller in domain config xml as following:
<controller type='usb' model='qusb2' ports='4'/>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
According to libxl implementation, it supports pvusb
controller of version 1.1 and version 2.0, and it
supports two types of backend, 'pvusb' (dom0 backend)
and 'qusb' (qemu backend). But currently pvusb backend
is not checked in yet.
To match libxl support, extend usb controller schema
to support two more models: qusb1 (qusb, version 1.1)
and 'qusb2' (qusb version 2.0).
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Let's cleanly differentiate what wiping a volume does for ploop and
other volumes so it's more readable what is done for each one instead of
branching out multiple times in different parts of the same function.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some functions use volume specification merely to use the target path
from it. Let's change it to pass the path only so that it can be used
for other files than just volumes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is done in order to call them in next patches from each other and
definitions would be missing otherwise.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When reset was called from a domain that crashed we didn't change the
crashed state into a paused one which could confuse users.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1269575
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Until now we simply errored out when the translation from pool+volume
failed. However, we should instead check whether that disk is needed or
not since there is an option for that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1168453
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is an error reset following the function and check for
startupPolicy before that. Let's reflect those things inside that
function so that future code doesn't have to be that complex.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When wiping a volume we just rewrite all the data of the volume, not
only the content. Since format gets overridden, we need to recreate the
volume. However we can't do that for every possible format out there.
Since it was only coded for the ploop volume type, let's document what
might be the consequences instead of forbidding it for every other
format out there.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=868771
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The panic devices with models s390 and pseries are autogenerated.
For backwards compatibility reasons the devices are to be removed
when migrating.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Ever since virDomainCreateWithFlags() was introduced by de3aadaa
[drivers: add virDomainCreateWithFlags if virDomainCreate exists], the
domain ID retrieved with virDomainGetID() was incorrect for several
drivers after virDomainCreateWithFlags() was called. The API consumer
had to look up the domain anew to retrieve the correct ID.
For the ESX driver, this was fixed in 6139b274 [esx: Update ID after
starting a domain]. For the openvz driver, it was fixed in fd81a097
[openvzDomainCreateWithFlags: set domain id to the correct value]. The
test driver, the OpenNebula driver (removed in the meantime) and the
vbox driver were already updating the domain ID correctly in
domainCreate().
Copy over the ID in qemuDomainCreateWithFlags() to fix this for the qemu
driver, too.
Fixes: de3aadaa ("drivers: add virDomainCreateWithFlags if virDomainCreate exists")
Reported-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Consider the following XML snippet:
<memory model=''>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
</memory>
Whats wrong you ask? The @model attribute. This should result in
an error thrown into users faces during virDomainDefine phase.
Except it doesn't. The XML validation catches this error, but if
users chose to ignore that, they will end up with invalid XML.
Well, they won't be able to start the machine - that's when error
is produced currently. But it would be nice if we could catch the
error like this earlier.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The original name 'admin_uri_default' was introduced to our code by commit
dbecb87f. However, at that time we already had a separate config file for
admin library but the commit mentioned above didn't properly adjust the
config's option name. The result is that when we're loading the config, we
check a non-existent config option (there's not much to do with the URIs
anyway, since we only allow local connection). Additionally, virt-admin's man
page documents, that the default URI can be altered by setting
admin_uri_default option. So the fix proposed by this patch leaves the
libvirt-admin.conf as is and adjusts the naming in the code as well as in the
virt-admin's man page.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356436
Commit id '56057900' altered the discovery of iSCSI node targets by
using the "--op nonpersistent". This caused issues for clean environments
or if by chance a "-m node -o delete" was executed.
Since each iSCSI Storage Pool has the required iSCSI target path, use
that and the virISCSINodeNew API in order to generate the iSCSI node record.
https://bugzilla.redhat.com/show_bug.cgi?id=1356436
According to RFC 3721 (https://www.ietf.org/rfc/rfc3721.txt), there are
two ways to "discover" targets in/for the iSCSI environment. Discovery
is the process which allows the initiator to find the targets to which
it has access and at least one address at which each target may be
accessed.
The method currently implemented in libvirt using the virISCSIScanTargets
API is known as "SendTargets" discovery. This method is more useful when
the target IP Address and TCP port information are available, e.g. in
libvirt terms the "portal". It returns a list of targets for the portal.
From that list, the target can be found. This operation can also fill an
iSCSI node table into which iSCSI logins may occur. Commit id '56057900'
altered that filling by adding the "--op nonpersistent" since it was
not necessarily desired to perform that for non libvirt related targets.
The second method is "Static Configuration". This method not only needs
the IP Address and TCP port (e.g. portal), but also the iSCSI target name.
In libvirt terms this would be the device path field from the iSCSI pool
<source> XML. This patch implements the second methodology using that
required device path as the targetname.
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactor the virStorageFileMatchesNNN methods so that
they don't take a struct FileFormatInfo parameter, but
instead get the actual raw dat items they needs. This
will facilitate reuse in other contexts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To collect all balloon statistics for all guests it was necessary to make
several libvirt requests. Now it's possible to get all balloon statiscs via
single connectGetAllDomainStats call.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To allow richer definitions of disk sources add infrastructure that will
allow to register functionst generating a JSON object based definition.
This infrastructure will then convert the definition to the proper
command line syntax and use it in cases where it's necessary. This will
allow to keep legacy definitions for back-compat when possible and use
the new definitions for the configurations requiring them.
Add support for converting objects nested in arrays with a numbering
discriminator on the command line. This syntax is used for the
object-based specification of disk source properties.
As gluster natively supports multiple hosts for failover reasons we can
easily add the support to the storage driver code in libvirt.
Extract the code setting an individual host into a separate function and
call them in a loop. The new code also tries to keep the debug log
entries sane.
Extract the code so that it can be called from multiple places. This
also removes a tricky fallthrough in the large switch in
qemuBuildNetworkDriveStr.
Add a modular parser that will allow to parse 'json' backing definitions
that are supported by qemu. The initial implementation adds support for
the 'file' driver.
Due to the approach qemu took to implement the JSON backing strings it's
possible to specify them in two approaches.
The object approach:
json:{ "file" : { "driver":"file",
"filename":"/path/to/file"
}
}
And a partially flattened approach:
json:{"file.driver":"file"
"file.filename":"/path/to/file"
}
Both of the above are supported by qemu and by the code added in this
commit. The current implementation de-flattens the first level ('file.')
if possible and required. Other handling may be added later but
currently only one level was possible anyways.
The cur_balloon also increases/decreases with dimm hotplug/unplug.
To be consistent, adjust the value for coldplug too. This was inconsistently
taken care when cur_ballon != memory to begin with. The patch fixes it
irrespective of that.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit c4bdff19, the path to the configuration file has been constructed
in the following manner:
- if no config filename was passed to virConfLoadConfigPath, libvirt.conf was
used as default
- otherwise the filename was concatenated with
"<config_dir>/libvirt/libvirt%s%s.conf" which in admin case resulted in
"libvirt-libvirt-admin.conf.conf". Obviously, this non-existent config led to
ignoring all user settings in libvirt-admin.conf. This patch requires the
config filename to be always provided as an argument with the concatenation
being simplified.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357364
Signed-off-by: Erik Skultety <eskultet@redhat.com>
For use with memory hotplug virQEMUBuildCommandLineJSONRecurse attempted
to format JSON arrays as bitmap on the command line. Make the formatter
function configurable so that it can be reused with different syntaxes
of arrays such as numbered arrays for use with disk sources.
This patch extracts the code and adds a parameter for the function that
will allow to plug in different formatters.
Until now the JSON->commandline convertor was used only for objects
created by qemu. To allow reusing it with disk formatter we'll need to
escape ',' as usual in qemu commandlines.
Refactor the command line generator by adding a wrapper (with
documentation) that will handle the outermost object iteration.
This patch also renames the functions and tweaks the error message for
nested arrays to be more universal.
The new function is then reused to simplify qemucommandutiltest.
As we already test that the extraction of the backing store string works
well additional tests for the backing store string parser can be made
simpler.
Export virStorageSourceNewFromBackingAbsolute and use it to parse the
backing store strings, format them using virDomainDiskSourceFormat and
match them against expected XMLs.
Nothing in the code path after the removed call has needs/uses the alias
anyway (as would be the case for command line building or talking to monitor).
The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any
device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree
as well as during virDomainDeviceInfoFree for host devices.
For persistent domains, the domain definition (including aliases) gets
freed a few screens later when it's replaced with newDef.
For transient domains, the definition is freed/unref'd along with the
virDomainObj a few moments later.
Introduce initial support for domainBlockStats API call that
allow us to query block device statistics. OpenStack nova
uses this API call to query block statistics, alongside
virDomainMemoryStats and virDomainInterfaceStats. Note that
this patch only introduces it for VBD for starters. QDisk
would come in a separate patch series.
A new statistics data structure is introduced to fit common
statistics among others specific to the underlying block
backends. For the VBD statistics on linux these are exported
via sysfs on the path:
"/sys/bus/xen-backend/devices/vbd-<domid>-<devid>/statistics"
To calculate the block devno libxlDiskPathToID is introduced.
Each backend implements its own function to extract statistics,
allowing support for multiple backends and different platforms.
VBD stats are exposed in reqs and number of sectors from
blkback, and it's up to us to convert it to sector sizes.
The sector size is gathered through xenstore in the device
backend entry "physical-sector-size".
BlockStatsFlags variant is also implemented which has the
added benefit of getting the number of flush requests.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
Dropping the caching of ccw address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.
The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.
Add a function that calculates the ccw address set
from the domain definition.
Dropping the caching of virtio serial address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.
Credit goes to Cole Robinson.
Dropping the caching of virtio serial address set.
Instead of using the cached address set, a function in qemu_hotplug.c
now recalculates it on demand.
Credit goes to Cole Robinson.
The address sets (pci, ccw, virtio serial) are currently cached
in qemu private data, but all the information required to recreate
these sets is in the domain definition. Therefore I am removing
the redundant data and adding a way to recalculate these sets.
Add a function that calculates the virtio serial address set
from the domain definition.
Credit goes to Cole Robinson.
The symbol being missing has been reported as causing build
failures on OS X. If it's not already defined, define it to
zero so that it won't have any effect.
Commit 4a585a88 introduced searching QOM device path by alias, let's use it for
memballoon too. This may speedup the search because in most cases we will find
the correct QOM device path directly by using alias without the need for the
recursion code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit ce745914 introduced detection of actual video ram sizes to fix migration
if QEMU decide to modify the values provided by libvirt. This works perfectly
for domains with number of video devices up to two.
If there are more than two video devices in the guest all the secondary devices
in the XML will have the same memory values. This is because our current code
search for QOM device path only by the device type name and all the secondary
video devices has the same name "qxl".
This patch introduces a new search function that will try to search a QOM device
path using also device's alias if the alias is available. After that it will
fallback to the old recursive code if the alias search found no results.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358728
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Previously, qemuDomainAttachDeviceFlags was doing two things:
handling the job and attaching devices. Now the second part is
in a new function.
This change is required to make it possible to test more complex
device attachment situations, like attaching a device to both
config and live at once.
We want to be able to pass a NULL instead of the connection
and use this function in tests. To achieve this, the virConnectPtr
is passed instead of virDomainPtr, and the driver is a new separate
parameter.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So commit 306b3a8504 tried mimicking behaviour of commit 540c339a25, but
added a virObjectRef(vm) only after virDomainObjListAdd() in
lxcDomainDefineXMLFlags() and not in lxcDomainCreateXMLWithFiles().
That way undefining a domain that was started with different XML than
defined will leave the domain object in a state with not enough
references to then remove it. Hence any lxcDomainDestroyFlags() called
afterwards crashes the daemon.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1351057
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since return code is checked globally at the end of the function, let's
make sure that we set it correctly at any point.
This fixes a regression introduced in commit 0aa19f35 where the first
command to eject changeable media would fail unconditionally.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
This patch forces container's init process, to become a session leader,
that is its session ID is made the same as its process ID.
That might seem unnecessary in general, but if we want to checkpoint a
container with CRIU, which is needed for container migration,
we must ensure that the SID of each process inside the container points
to a process that lives in the same PID namespace as the container.
Therefore, we force that the session leader is the init.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
When parsing a command line with USB devices that have
no address specified, QEMU automatically adds a USB hub
if the device would fill up all the available USB ports.
To help most of the users, add one hub if there are more
USB devices than available ports. For wilder configurations,
expect the user to provide us with more hubs and/or controllers.
Walk through all the usb hubs in the domain definition
that have a USB address specified, create the
corresponding structures in the virDomainUSBAddressSet
and mark the port it occupies as used.
A new type to track USB addresses.
Every <controller type='usb' index='i'/> is represented by an
object of type virDomainUSBAddressHub located at buses[i].
Each of these hubs has up to 'nports' ports.
If a port is occupied, it has the corresponding bit set in
the 'ports' bitmap, e.g. port 1 would have the 0th bit set.
If there is a hub on this port, then hubs[i] will point
to this hub.
Undefine procedure drops domain lock while waiting for detaching
disks vz sdk call. Meanwhile vz sdk event domain-config-changed
arrives, its handler finds domain and is blocked waiting for job
condition. After undefine API call finishes event processing procedes
and tries to refreshes domain config thru existing vz sdk domain handle.
Domain does not exists anymore and event processing fails. Everything
is fine we just don't want to see error message in log for this
particular case.
Fortunately domain has flag that domain is removed from list. This
also imply that vz sdk domain is also undefined. Thus if we check
for this flag right after domain is locked again on accuiring
job condition we gracefully handle this situation.
Actually the race can happen in other situations too. Any
time we wait for job condition in mutualy exclusive job in
time when we acquire it vz sdk domain can cease to exist.
So instead of general internal error we can return domain
not found which is easier to handle. We don't need to patch
other places in mutually exclusive jobs where domain lock
is dropped as if job is started domain can't be undefine
by mutually exclusive undefine job.
The code of this patch is quite similar to qemu driver checks
for is domain is active after acquiring a job. The difference
only while qemu domain is operational while process is active
vz domain is operational while domain exists.
Current vz driver implementation is not usable when it comes to
long runnig operations. Migration or saving a domain blocks all
other operations even query ones which are expecteted to be available.
This patch addresses this problem.
All vz driver API calls fall into next 3 groups:
1. only query domain cache (virDomainObj, vz cache statistic)
examples are vzDomainGetState, vzDomainGetXMLDesc etc.
2. use thread shared sdkdom object
examples are vzDomainSetMemoryFlags, vzDomainAttachDevice etc.
3. use no thread shared sdkdom object nor domain cache
examples are vzDomainSnapshotListNames, vzDomainSnapshotGetXMLDesc etc
API calls from group 1 don't need to be changed as they hold domain lock only
for short period of time. These calls [1] are easily distinguished. They query
domain object thru libvirt common code or query vz sdk statistics handle thru
vz sdk sync operations.
vzDomainInterfaceStats is the only exception. It uses sdkdom object to
convert interface name to its vz sdk stack index which could not be saved in
domain cache. Interface statistics is available thru this stack index as a key
rather than name. As a result we can have accidental 'not known interface'
errors on quering intrerface stats. The reason is that in the process of
updating domain configuration we drop all devices and then recreate them again
in sdkdom object and domain lock can be dropped meanwhile (to remove networks
for existing bridged interfaces and(or) (re)create new ones). We can fix this
by changing the way we support bridged interfaces or by reordering operations
and changing bridged networks beforehand. Anyway this is better than moving
this API call into 2 group and making it an exclusive job.
As to API calls from group 2, first thread shared sdkdom object needs to be
explained. vz sdk has only one handle for a given domain, thus threads need
exclusive access to operate on it. These calls are fixed to drop and reacquire
domain lock on any lengthy operations - namely waiting the result of async vz
sdk operation. As lock is dropped we need to take extra reference to domain
object if it is not taken already as domain object can be deleted from list
while lock is dropped. As this operations use thread shared sdkdom object, the
simplest way to make calls from group 2 be consistent to each other is to make
them mutually exclusive. This is done by taking/releasing job condition thru
calling correspondent job routine. This approach makes group 1 and group
2 calls consistent to each other too. Not all calls of group 2 change the
domain cache but those that do update it thru prlsdkUpdateDomain which holds
the lock thoughout the update.
API calls from group [2] are easily distinguished too. They use
beginEdit/commit to change domain configuration (vzDomainSetMemoryFlags) or/and
update domain cache from sdkdom at the end of operation (vzDomainSuspend).
There is a known issue however. Frankly speaking it was introduced by ealier
patch '[PATCH 6/9] vz: cleanup loading domain code' from a different series.
The patch significantly reduced amount of time when the driver lock is held when
creating domain from API call or as a result of domain added event from vz sdk.
The problem is these two paths race on using thread shared sdkdom as we don't
have libvirt domain object and can not lock on it. However this don't
invalidates the patch as we can't use the former approach of preadding domain
into the list as we need name at least and name is not given by event. Anyway
i'm against adding half baked object into the list. Eventually this race can be
fixed by extra measures. As to current situation races with different
configurations are unlikely and race when adding domain thru vz driver and
simultaneous event from vz sdk is not dangerous as configuration is the same.
The last group [3] is API calls that need only sdkdom object to make vz sdk
call and don't change thread shared sdkdom object or domain cache in any way.
For now these are mostly domain snapshot API calls. The changes are similar to
those of group 2 - they add extra reference and drop/reacquire the lock on waiting
vz async call result. One can simply take the immutable sdkdom object from the
cache and drop the lock for the rest of operations but the chosen approach
makes implementation of these API calls somewhat similar to those of from group
2 and thus a bit futureproof. As calls of group 3 don't need vz driver
domain/vz sdk cache in any way, they are consistent with respect to API calls from
groups 1 and 3.
There is another exception. Calls to make-snapshot/revert-to-snapshot/migrate
are moved to group 2. That is they are made mutually exclusive. The reason
is that libvirt API supports control/query only for one job per domain and
these are jobs that are likely to be queried/aborted.
Appendix.
[1] API calls that only query domain cache.
(marked [*] are included for a different reason)
.domainLookupByID = vzDomainLookupByID, /* 0.10.0 */
.domainLookupByUUID = vzDomainLookupByUUID, /* 0.10.0 */
.domainLookupByName = vzDomainLookupByName, /* 0.10.0 */
.domainGetOSType = vzDomainGetOSType, /* 0.10.0 */
.domainGetInfo = vzDomainGetInfo, /* 0.10.0 */
.domainGetState = vzDomainGetState, /* 0.10.0 */
.domainGetXMLDesc = vzDomainGetXMLDesc, /* 0.10.0 */
.domainIsPersistent = vzDomainIsPersistent, /* 0.10.0 */
.domainGetAutostart = vzDomainGetAutostart, /* 0.10.0 */
.domainGetVcpus = vzDomainGetVcpus, /* 1.2.6 */
.domainIsActive = vzDomainIsActive, /* 1.2.10 */
.domainIsUpdated = vzDomainIsUpdated, /* 1.2.21 */
.domainGetVcpusFlags = vzDomainGetVcpusFlags, /* 1.2.21 */
.domainGetMaxVcpus = vzDomainGetMaxVcpus, /* 1.2.21 */
.domainHasManagedSaveImage = vzDomainHasManagedSaveImage, /* 1.2.13 */
.domainGetMaxMemory = vzDomainGetMaxMemory, /* 1.2.15 */
.domainBlockStats = vzDomainBlockStats, /* 1.2.17 */
.domainBlockStatsFlags = vzDomainBlockStatsFlags, /* 1.2.17 */
.domainInterfaceStats = vzDomainInterfaceStats, /* 1.2.17 */ [*]
.domainMemoryStats = vzDomainMemoryStats, /* 1.2.17 */
.domainMigrateBegin3Params = vzDomainMigrateBegin3Params, /* 1.3.5 */
.domainMigrateConfirm3Params = vzDomainMigrateConfirm3Params, /* 1.3.5 */
[2] API calls that use thread shared sdkdom object
(marked [*] are included for a different reason)
.domainSuspend = vzDomainSuspend, /* 0.10.0 */
.domainResume = vzDomainResume, /* 0.10.0 */
.domainDestroy = vzDomainDestroy, /* 0.10.0 */
.domainShutdown = vzDomainShutdown, /* 0.10.0 */
.domainCreate = vzDomainCreate, /* 0.10.0 */
.domainCreateWithFlags = vzDomainCreateWithFlags, /* 1.2.10 */
.domainReboot = vzDomainReboot, /* 1.3.0 */
.domainDefineXML = vzDomainDefineXML, /* 0.10.0 */
.domainDefineXMLFlags = vzDomainDefineXMLFlags, /* 1.2.12 */ (update part)
.domainUndefine = vzDomainUndefine, /* 1.2.10 */
.domainAttachDevice = vzDomainAttachDevice, /* 1.2.15 */
.domainAttachDeviceFlags = vzDomainAttachDeviceFlags, /* 1.2.15 */
.domainDetachDevice = vzDomainDetachDevice, /* 1.2.15 */
.domainDetachDeviceFlags = vzDomainDetachDeviceFlags, /* 1.2.15 */
.domainSetUserPassword = vzDomainSetUserPassword, /* 1.3.6 */
.domainManagedSave = vzDomainManagedSave, /* 1.2.14 */
.domainSetMemoryFlags = vzDomainSetMemoryFlags, /* 1.3.4 */
.domainSetMemory = vzDomainSetMemory, /* 1.3.4 */
.domainRevertToSnapshot = vzDomainRevertToSnapshot, /* 1.3.5 */ [*]
.domainSnapshotCreateXML = vzDomainSnapshotCreateXML, /* 1.3.5 */ [*]
.domainMigratePerform3Params = vzDomainMigratePerform3Params, /* 1.3.5 */ [*]
.domainUpdateDeviceFlags = vzDomainUpdateDeviceFlags, /* 2.0.0 */
prlsdkHandleVmConfigEvent
[3] API calls that do not use thread shared sdkdom object
.domainManagedSaveRemove = vzDomainManagedSaveRemove, /* 1.2.14 */
.domainSnapshotNum = vzDomainSnapshotNum, /* 1.3.5 */
.domainSnapshotListNames = vzDomainSnapshotListNames, /* 1.3.5 */
.domainListAllSnapshots = vzDomainListAllSnapshots, /* 1.3.5 */
.domainSnapshotGetXMLDesc = vzDomainSnapshotGetXMLDesc, /* 1.3.5 */
.domainSnapshotNumChildren = vzDomainSnapshotNumChildren, /* 1.3.5 */
.domainSnapshotListChildrenNames = vzDomainSnapshotListChildrenNames, /* 1.3.5 */
.domainSnapshotListAllChildren = vzDomainSnapshotListAllChildren, /* 1.3.5 */
.domainSnapshotLookupByName = vzDomainSnapshotLookupByName, /* 1.3.5 */
.domainHasCurrentSnapshot = vzDomainHasCurrentSnapshot, /* 1.3.5 */
.domainSnapshotGetParent = vzDomainSnapshotGetParent, /* 1.3.5 */
.domainSnapshotCurrent = vzDomainSnapshotCurrent, /* 1.3.5 */
.domainSnapshotIsCurrent = vzDomainSnapshotIsCurrent, /* 1.3.5 */
.domainSnapshotHasMetadata = vzDomainSnapshotHasMetadata, /* 1.3.5 */
.domainSnapshotDelete = vzDomainSnapshotDelete, /* 1.3.5 */
[4] Known issues.
1. accidental errors on getting network statistics
2. race with simultaneous use of thread shared domain object on paths
of adding domain thru API and adding domain on vz sdk domain added event.
sdk domain handle is unique per connection so there is
no sense to query it again if we have it in vzDomObjPtr.
Side effect of prlsdkSdkDomainLookupByUUID is refreshing
domain config is of no use too as PrlVm_BeginEdit do it too.
Commit id '5e46d7d6' did not take into account that usage of a luks
volume will require usage of the master key encrypted passphrase for
a QEMU environment. So rather than allow creation of something that
won't be usable, just fail the creation.
Resolves a CI test integration failure with a RHEL6/Centos6 environment.
In order to use a LUKS encrypted device, the design decision was to
generate an encrypted secret based on the master key. However, commit
id 'da86c6c' missed checking for that specifically.
When qemuDomainSecretSetup was implemented, a design decision was made
to "fall back" to a plain text secret setup if the specific cipher was
not available (e.g. virCryptoHaveCipher(VIR_CRYPTO_CIPHER_AES256CBC))
as well as the QEMU_CAPS_OBJECT_SECRET. For the luks encryption setup
there is no fall back to the plaintext secret, thus if that gets set
up by qemuDomainSecretSetup, then we need to fail.
Also, while the qemuxml2argvtest has set the QEMU_CAPS_OBJECT_SECRET
bit, it didn't take into account the second requirement that the
ability to generate the encrypted secret is possible. So modify the
test to not attempt to run the luks-disk if we know we don't have
the encryption algorithm.
Any error happening after the hand shake in the lxc controller
will not result in a failure as errors are checked during the handshake.
Move the handshake after the last possible error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021
Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.
For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.
Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).
Add the .args output for adding the LUKS disk to the domain
Signed-off-by: John Ferlan <jferlan@redhat.com>
Soon we will be adding luks encryption support. Since a volume could require
both a luks secret and a secret to give to the server to use of the device,
alter the alias generation to create a slightly different alias so that
we don't have two objects with the same alias.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id 'a1344f70a' added AES secret processing for RBD when starting
up a guest. As such, when the hotplug code calls qemuDomainSecretDiskPrepare
an AES secret could be added to the disk about to be hotplugged. If an AES
secret was added, then the hotplug code would need to generate the secret
object because qemuBuildDriveStr would add the "password-secret=" to the
returned 'driveStr' rather than the base64 encoded password.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Partially resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1301021
If the volume xml was looking to create a luks volume take the necessary
steps in order to make that happen.
The processing will be:
1. create a temporary file (virStorageBackendCreateQemuImgSecretPath)
1a. use the storage driver state dir path that uses the pool and
volume name as a base.
2. create a secret object (virStorageBackendCreateQemuImgSecretObject)
2a. use an alias combinding the volume name and "_luks0"
2b. add the file to the object
3. create/add luks options to the commandline (virQEMUBuildLuksOpts)
3a. at the very least a "key-secret=%s" using the secret object alias
3b. if found in the XML the various "cipher" and "ivgen" options
Signed-off-by: John Ferlan <jferlan@redhat.com>
When formatting the graphics data for TYPE_SPICE, check if the glisten
is NULL before blindly referencing
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
A recent adjustment to qemuDomainAttachRNGDevice to properly cleanup
the props object after a qemuMonitorAddObject also would affect this
code. Alter the cleanup to be similar to RNG changes.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Commit da665fbd introduced the following condition to virLXCProcessEnsureRootFS
and openvzReadFSConf:
if (!(<some_var> = virDomainFSDefNew()) < 0)
which broke the build on fedora with GCC 5.3.1: "logical not is only applied to
the left hand side of comparison".
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The commit da665fbd introduced virStorageSourcePtr inside the structure
_virDomainFSDef. This is causing an error when libvirt is being compiled.
make[3]: Entering directory `/media/julio/8d65c59c-6ade-4740-9cdc-38016a4cb8ae
/home/julio/Desktop/virt/libvirt/src'
CC security/virt_aa_helper-virt-aa-helper.o
security/virt-aa-helper.c: In function 'get_files':
security/virt-aa-helper.c:1087:13: error: passing argument 2 of 'vah_add_path'
from incompatible pointer type [-Werror]
if (vah_add_path(&buf, fs->src, "rw", true) != 0)
^
security/virt-aa-helper.c:732:1: note: expected 'const char *' but argument is
of type 'virStorageSourcePtr'
vah_add_path(virBufferPtr buf, const char *path, const char *perms, bool
recursive)
^
cc1: all warnings being treated as errors
Adding the attribute "path" from virStorageSourcePtr fixes this issue.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
vz supports only a subset of tcp and udp parameters.
1. tcp type supports only 'raw' protocol.
2. udp type supports only same parameters of 'host' and 'service'
for 'bind' and 'connect'.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
After domain is in the domains list let's keep it there. This
is approach taken by qemu driver and vz vzDomainMigrateFinish3Params too.
It quite reasonable, driver domain object is fully constructed and
can be discovered by client later.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
9c14a9ab introduced vzNewDomain function to enlist libvirt domain
object before actually creating vz sdk domain. Fix should fix
race on same vz sdk domain added event where libvirt domain object is
enlisted too. But later eb5e9c1e added locked checks for
adding livirtd domain object to list on vz sdk domain added event.
Thus now approach of 9c14a9ab is unnecessary complicated.
See we have otherwise unuseful prlsdkGetDomainIds function only
to create minimal domain definition to create libvirt domain object.
Also vzNewDomain is difficult to use as it creates partially
constructed domain object.
Let's move back to original approach where prlsdkLoadDomain do
all the necessary job. Another benefit is that we can now
take driver lock for bare minimum and in single place. Reducing
locking time have small disadvatage of double parsing on race
conditions which is typical if domain is added thru vz driver.
Well we have this double parse inevitably with current vz sdk api
on any domain updates so i would not take it here seriously.
Performance events subscribtion is done before locked check and
therefore could be done twice on races but this is not the problem.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Vz containers are able to use ploop volumes from storage pools
to work upon.
To use filesystem type volume, pool name and volume name should be
specifaed in <source> :
<filesystem type='volume' accessmode='passthrough'>
<driver type='ploop' format='ploop'/>
<source pool='guest_images' volume='TEST_POOL_CT'/>
<target dir='/'/>
</filesystem>
The information about pool and volume is stored in ct dom configuration:
<StorageURL>libvirt://localhost/pool_name/vol_name</StorageURL>
and can be easily obtained via PrlVmDevHd_GetStorageURL sdk call.
The only shorcoming: if storage pool is moved somewhere the ct
should be redefined in order to refresh the information aboot path
to root.hdd
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
We do not need to check domainf fs type there,
because it is done in prlsdkCheckUnsupportedParams.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
New type of <devices> <filesystem type= 'volume'> is introduced.
This patch allows to use volumes for storing the filesystem, that is
accessed from the guest e.g. root directory for container.
To take advantage of volumes as a backend of filesystem volume
and pool names should be specified:
<filesystem type= 'volume'>
<source pool='pool name' volume='volume name'/>
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Adding domain to domain list on preparation step is not correct.
First domain is not fully constructed - domain definition is
missing. Second we can't use VIR_MIGRATE_PARAM_DEST_XML parameter
to parse definition as vz sdk can patch it by itself. Let's add/remove
domain on finish step. This is for synchronization purpose only so domain
is present/absent on destination after migration completion. Actually
domain object will probably be created right after actual vz sdk
migration start by vz sdk domain defined event.
We can not and should not sync domain cache on error path in finish step
of migration. We can not as we really don't know what is the reason of
cancelling and we should not as user should not make assumptions on
state on error path. What we should do is cleaning up temporary migration
state that is induced on prepare step but we don't have one. Thus
cancellation should be noop.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
libvirt domain defined event is issued only on correspondent vz sdk
event. But in case event delivered before domain is added to
domain list we can mistakenly skip this event if prlsdkNewDomainByHandle
return NULL in case of domain is discovered in the list under
the driver lock. Let's return domain object in this case.
Now prlsdkNewDomainByHandle returns NULL only in case of
error which is more convinient.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The first version of migration cookie was rather dumb resulting
in passing empty or unused fields here and there. Add flags to
specify what to bake to and eat from cookie so we deal only
with meaningful data. However for backwards compatibility
we still need to pass at least some faked fields sometimes.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Older libvirt versions send persistent XML in a migration cookie even
when VIR_MIGRATE_PERSIST_DEST flag is not used, but current libvirt
properly fails if the cookie contains unexpected flags. Thus migration
from old libvirt fails with
internal error: Unsupported migration cookie feature persistent
unless VIR_MIGRATE_PERSIST_DEST flag is set.
https://bugzilla.redhat.com/show_bug.cgi?id=1320500
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A nodedev device definition like this is required for testing
NodeDeviceCreateXML and NodeDeviceDestroy. So unless it's part
of the stock test:///default set there's no way to actually
invoke those functions for the default URI
Convert the individual XML documents into one big XML document
in the format expected by the non-default test://$PATH URI, and
use the same internal helpers for assembling the driver contents.
virConfGetValueLLong() errors out if the value is too big to
fit into a long long integer, but claims the supported range
to be (0,LLONG_MAX) instead of (LLONG_MIN,LLONG_MAX).
When parsing numeric values, we always store them as unsigned
unless they're negative. We can use this fact to simplify the
logic by removing a bunch of unnecessary checks.
Commit 6381c89f8c changed virConfValue to store long long
integers instead of long integers; however, the temporary variable
used in virConfParseLong() was not updated accordingly, causing
trouble for 32-bit machines.
In preparation to tracking which USB addresses are occupied.
Introduce two helper functions for printing the port path
as a string and appending it to a virBuffer.
We were requiring a USB port path in the schema, but not enforcing it.
Omitting the USB port would lead to libvirt formatting it as (null).
Such domain cannot be started and will disappear after libvirtd restart
(since it cannot parse back the XML).
Only format the port if it has been specified and mark it as optional
in the XML schema.
Migration to an older libvirt (pre v1.3.0-175-g7140807) is broken
because older versions of libvirt generated different channel paths and
they didn't drop the default paths when parsing domain XMLs. We'd get
such a nice error message:
internal error: process exited while connecting to monitor:
2016-07-08T15:28:02.665706Z qemu-kvm: -chardev socket,
id=charchannel0,path=/var/lib/libvirt/qemu/channel/target/
domain-3-nest/org.qemu.guest_agent.0,server,nowait: Failed to bind
socket to /var/lib/libvirt/qemu/channel/target/domain-3-nest/
org.qemu.guest_agent.0: No such file or directory
That said, we should not even format the default paths when generating a
migratable XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1320470
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
