Commit Graph

727 Commits

Author SHA1 Message Date
Andrea Bolognani
3b6d69237f Revert "conf: Introduce MTE domain feature"
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.

Reverts: 720e8f13ff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2023-05-22 15:13:19 +02:00
Peter Krempa
af621caa6b conf: numa: Allow formatting 'none' values for 'associativity' and 'policy' of cache
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-05-17 10:07:18 +02:00
Peter Krempa
a8a63587ff qemuxml2xmltest: Modernize all 'audio-' cases
Use DO_TEST_CAPS_LATEST to run with the latest capapbilities.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-05-17 10:02:19 +02:00
Peter Krempa
36d7d87c87 qemuxml2xmlout: Replace symlinks of all 'audio-' tests by real files
Symlinks are hard to maintain and especially un-cool when attempting to
test against real capapbilities.

Replace symlinks by real files first so that we can switch to real caps
and see the difference.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-05-17 10:02:19 +02:00
Michal Privoznik
720e8f13ff conf: Introduce MTE domain feature
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.

1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2023-05-16 17:42:58 +02:00
Peter Krempa
3d6bc5c611 conf: qemu: Add support for multi-channel mode for 'usb' sound cards
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.

Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-05-09 15:12:03 +02:00
Peter Krempa
d6d4cfa5fc qemuxml2(argv|xml)test: Modernize 'sound-device' case
Drop the unnecessary disk definition and use x86_64 emulator.

For 'qemuxml2argvtest' replace the fake-caps invocation by a 4.2.0
version-locked invocation and  add a '_CAPS_LATEST' invocation.

For 'qemuxml2xmltest' convert to use '_CAPS_LATEST' only.

There are no sound-device relevant changes in the output files.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-05-09 15:12:03 +02:00
Peter Krempa
351504744e qemuxml2(argv|xml)test: Remove 'sound' case
The test case is a subset of what the 'sound-device' case tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-05-09 15:12:03 +02:00
Ján Tomko
03ca889b15 qemu: allow forcing emulated maxphysaddr
Treat:
  <maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2023-04-25 11:19:37 +02:00
Ján Tomko
d6fbb21210 conf: cpu: add limit for maxphysaddr
Add a limit attribute to restrict the maximum physical address bits
that would be used for the guest CPU:

   <cpu mode='host-passthrough'>
     <maxphysaddr mode='passthrough' limit='39'/>
   </cpu>

https://gitlab.com/libvirt/libvirt/-/issues/450
https://bugzilla.redhat.com/show_bug.cgi?id=2171860

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2023-04-25 11:19:37 +02:00
Martin Kletzander
2669b442f9 qemu: Forbid ib700 watchdogs for non-i440fx machine types
We can launch qemu with it, but it will not work since it's not even
probed by the kernel at the mapped address with different machine types
since they are expected to be connected to ISA and not even its newer
LPC counterpart found on q35.  And it does not exist on non-x86
architectures.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-04-20 10:17:35 +02:00
Andrea Bolognani
f9ad302335 conf: Fix migration in some firmware autoselection scenarios
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.

https://bugzilla.redhat.com/show_bug.cgi?id=2184966

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-12 18:03:21 +02:00
Peter Krempa
962bf7c9a5 qemuxml2xmltest: Convert rest of 'aarch64' cases to real capabilities
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-11 10:08:32 +02:00
Peter Krempa
bd4da926b1 qemuxml2xmltest: Modernize 'mach-virt*' cases
Use real capabilities.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-11 10:08:32 +02:00
Peter Krempa
4d0d31a6fd qemuxml2xmloutdata: Don't symlink output data for 'mach-virt*' cases
Replace them with full files so that potential fallout from conversion
to real capabilities is more obvious and the test is simpler to add.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-11 10:08:32 +02:00
Peter Krempa
74d4876d20 qemuxml2xmltest: Modernize 'aarch64-gic*' test cases
Use real capabilities for them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-11 10:08:32 +02:00
Peter Krempa
0e550e7175 qemuxml2xmlout: Do not symlink output files for 'aarch64-gic' cases
Upcoming patch will be modifying all of them to use real capabilities.
This way it will be more obvious what will change.

Keeping the symlinks around is tedious for humans to do. Waste some
storage instead.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-11 10:08:32 +02:00
Peter Krempa
2449907112 qemuxml2(argv|xml)test: Modernize testing of USB controllers on aarch64
All supported qemu versions at this point support both 'qemu-xhci' and
'nec-xhci' controllers. To allow using real capabilities restructure the
tests so that we test both controllers explicitly as well as the
selection of the default model.

Also add a xml2xml test invocation of the unified test.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-11 10:08:32 +02:00
Peter Krempa
c42753524e qemuxml2*test: Drop fake-caps invocation of 'aarch64-virtio-pci-manual-addresses'
The fake-caps version was kept as an example that the code behaves the
same with real capabilities. Now it's not needed any more.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-11 10:08:32 +02:00
Peter Krempa
f217410a47 qemuxml2argvtest: Update 'aarch64-virtio-pci-manual-addresses' case
With all supported qemu versions we'll pick PCIe to use for the implicit
address busses (those lacking an explicit controller) and thus the
addresses must reflect that.

Update the test to add the new flags, and fix the addresses.
Additionally add a real-caps version of the test.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-11 10:08:32 +02:00
Peter Krempa
a5bd444cb2 qemuxml2xmltest: Convert all s390 test cases to real capabilities
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-03 09:19:08 +02:00
Peter Krempa
a2c4503021 qemuxml2xmltest: Modernize all remaining 'ppc64' test cases
Switch them to use latest caps.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-03 09:19:07 +02:00
Peter Krempa
131493cf68 qemuxml2(argv|xml): Convert "hvf-aarch64-virt-headless" test case to real capabilities
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-03 09:19:07 +02:00
Peter Krempa
1d1f22f478 qemuxml2(argv|xml): Convert "hvf-x86_64-q35-headless" test case to real capabilities
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-03 09:19:07 +02:00
Andrea Bolognani
420a7a2550 qemu: Default to raw firmware for existing domains
The changes to the output files are the exact opposite of
those from commit 22207713cf: this is proof that the fix is
working as intended, and that existing domains will keep using
raw firmware images regardless of whether or not qcow2 images
are available on the system and have higher priority.

New domains will keep picking whatever firmware is considered
the preferred one according to the order of descriptors, as
evidenced by the fact that the recently introduced
firmware-auto-efi-abi-update-aarch64 test case is unaffected.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2023-03-28 14:22:34 +02:00
Andrea Bolognani
6bafa74d62 tests: Add firmware-auto-efi-abi-update-aarch64 test case
The input is identical to that of the existing
firmware-auto-efi-aarch64 test, but in this case we want to
cover the scenario in which that input is used to define a new
domain rather than loading the definition of an existing domain
from disk.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2023-03-28 12:41:32 +02:00
Andrea Bolognani
24ad99d76d qemu: Automatically add firmware type/features information
Even when the user is not taking advantage of firmware
autoselection and instead manually providing all the necessary
information, in most cases they're still going to use firmware
builds that are provided by the OS vendor, are installed in
standard paths and come with a corresponding firmware
descriptor.

Similarly, even when the user is not guiding the autoselection
process by specifying the desired status of certain features
and instead is relying on the system-level descriptor priority
being set up correctly, libvirt will still ultimately decide to
use a specific descriptor, which includes information about the
firmware's features.

In both these cases, take the additional information that were
obtained from the firmware descriptor and reflect them back into
the domain XML, where they can be conveniently inspected by the
user and management applications alike.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-22 13:49:53 +01:00
Andrea Bolognani
50d68c1d10 qemu: Don't drop firmware type/features information
Now that we no longer reject configurations that include both
this information and explicit firmware details, as long of
course as everything is internally consistent, and that we've
ensured that we produce maximally compatible XML on migration,
we can stop stripping this information at the end of the
firmware selection process.

There are several advantages to keeping this information around:

  * if the user wants to change the firmware configuration for
    an existing VM, they can simply drop the <loader> and
    <nvram> elements, tweak the firmware autoselection parameters
    and let libvirt pick a firmware that matches on the new
    requirements;

  * management applications can inspect the XML and easily
    figure out firmware-related information without having to
    reverse-engineer them based on some opaque paths.

Overall, this change makes things more transparent and easier to
understand. The improvement is so significant that, in a
follow-up commit, we're going to ensure that this information is
available in even more cases.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-22 13:49:53 +01:00
Andrea Bolognani
ccf4aa37a0 conf: Remove some firmware validation checks
libvirt 8.6.0 introduced these checks and very clearly delineated
two possible firmware selection scenarios: manual firmware
selection, where the user is responsible for providing all
information, and firmware autoselection, where a list of desired
features is provided and everything else is handled by libvirt.

In the interest of maintaining the clear separation between these
two scenarios, setting most attributes when firmware autoselection
is active will result in the configuration being rejected.

This works fine, but is unnecessarily restrictive: in most cases,
the additional information that the user has provided matches
the information that libvirt would have discovered on its own by
looking at firmware descriptors, and asking the user to scrub it
from the XML only result in pointless friction.

Remove these checks entirely.

Unsurprisingly, this results in a few test cases that were
rejected until now to suddenly start working and producing
sensible results.

The firmware-auto-efi-loader-path-nonstandard test case is
notable: while we can now enable the xml2xml part of the test,
the xml2argv part is still failing, although in a slightly
different way. This is expected: since the firmware binary is a
non-standard one, libvirt is unable to figure out the missing
information from a firmware descriptor, and the configuration
is still ultimately an invalid one. However, if we were to find
such a configuration on disk at daemon startup, we would not
ignore it completely and instead would offer the user a chance
to fix it.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-22 13:49:53 +01:00
Andrea Bolognani
3030010fa9 tests: Fix firmware descriptor masking test
Right now we're checking that firmware descriptor masking works
as intended by creating an empty file matching 60-ovmf-sb.json
in name.

However, that firmware descriptors contains the details for a
perfectly valid and quite common situation: Secure Boot being
supported by the firmware build, but being effectively disabled
by the lack of certificates in the NVRAM template.

Unmask that firmware descriptor, and instead create a dummy one
that has higher priority than all other OVMF builds and points
to paths that are obviously incorrect, which should make it
easy to notice it getting accidentally unmasked in the future.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-22 13:49:53 +01:00
Andrea Bolognani
bf6a6f90a9 tests: Add more tests for manual Secure Boot configuration
These cover the same scenarios as the matching test cases for
autoselection.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-22 13:49:53 +01:00
Andrea Bolognani
bfb507853a tests: Rename a few firmware tests
This unifies the naming between the manual and automatic
selection cases, clarifies the contents of the tests and makes
room for more tests being added in the future.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-22 13:49:53 +01:00
Or Ozeri
5589a3e1f3 qemu: add luks-any encryption support for RBD images
The newly added luks-any rbd encryption format in qemu
allows for opening both LUKS and LUKS2 encryption formats.
This commit enables libvirt uses to use this wildcard format.

Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2023-03-16 15:19:36 +01:00
Or Ozeri
77c9663d72 qemu: add support for librbd layered encryption
This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.

Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2023-03-16 15:19:36 +01:00
Michal Privoznik
c4c90063a5 qemuxml2argvdata: Extend vCPUs placement in memory-hotplug-dimm-addr.xml
So far, the memory-hotplug-dimm-addr.xml test case pins its vCPUs
onto CPUs 0-1 which correspond to NUMA node #0 (per
tests/vircaps2xmldata/linux-basic/system/node/node0). Place vCPUs
onto nodes #1 and #2 too so that DIMM <memory/> device can
continue using thread-context after future patches. This
configuration, as-is currently, would make QEMU error out anyway.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2023-03-15 12:46:33 +01:00
Michal Privoznik
d91ca262fb qemuxml2argvdata: Adjust maximum NUMA node used
We have couple of qemuxml2argvtest cases where up to 8 NUMA nodes
are assumed. These are used to check whether disjoint ranges of
host-nodes= is generated properly. Without prejudice to the
generality, we can rewrite corresponding XML files to use up to 4
NUMA nodes and still have disjoint ranges.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2023-03-15 12:46:28 +01:00
Christian Nautze
a9a4421ba8 qemu: implement QEMU NBD source reconnect delay attribute
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:

  <disk type='network' device='disk'>
    <driver name='qemu' type='raw'/>
    <source protocol='nbd' name='foo'>
      <host name='example.org' port='6000'/>
      <reconnect delay='10'/>
    </source>
    <target dev='vdb' bus='virtio'/>
  </disk>

Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-10 09:38:05 +01:00
Eric Farman
97dddef48c qemuAppendLoadparmMachineParm: add loadparm from hostdev
Commit 54fa1b44af ("conf: Add loadparm boot option for a boot device")
added the ability to specify a loadparm parameter on a <boot/> tag, while
commit 29ba41c2d4 ("qemu: Add loadparm to qemu command line string")
added that value to the QEMU "-machine" command line parameters.

Unfortunately, the latter commit only looked at disks and network
devices for boot information, even though anything with
VIR_DOMAIN_DEF_FORMAT_ALLOW_BOOT could potentially have this tag.
In practice, a <hostdev> tag pointing to a passthrough (SCSI or DASD)
disk device can be used in this way, which means the loadparm is
accepted, but not given to QEMU.

Correct this, and add some XML/argv tests.

Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-10 08:54:05 +01:00
Jonathon Jongsma
168b0ca3fc qemu: Implement 'blob' support for virtio gpu
This can improve performance for some guests since it reduces copying of
display data between host and guest. Requires udmabuf on the host.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-08 13:05:05 -06:00
Peter Krempa
4ee4809907 qemu: validate: Fix logic for validating presence of the HPET timer
Commit 24cc9cda82 switched over to use -machine hpet, but one of the
steps it did was to clear the QEMU_CAPS_NO_HPET capability.

The validation check still uses the old capability though which means
that for configs which would explicitly enable HPET we'd report an error.

Since HPET is an x86(_64) platform specific device, convert the
validation check to an architecture check as all supported qemu versions
actually support it.

Modify a test case to request HPET to catch posible future problems.

Fixes: 24cc9cda82
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-07 12:26:32 +01:00
Peter Krempa
fe9b95d97d qemuxml2(argv|xml)test: Convert last fake-caps riscv64 tests to real caps
Preserve testing of the MMIO use case in case when GPEX is complied out
of qemu.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-06 20:55:50 +01:00
Peter Krempa
3c02b1e810 tests: qemu: Move testing of default cache and disk source with space to 'sata-device'
Integrate the two special cases used for schema testing into the more
useful qemuxml2argvtest, whose input data is still tested against the
schema.

Add also a xml output variant.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-06 20:55:49 +01:00
Andrea Bolognani
0b464cd84f tests: Drop more QEMU driver config overrides
These are allegedly necessary to keep the output consistent,
but now that we're using a privileged config for the driver we
get the desired behavior out of the box, and as a bonus the
paths match what you would actually see on a regular host.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2023-03-06 14:44:13 +01:00
Peter Krempa
aa0619f79d tests: qemuxml2argvdata: Remove irrelevant <disk> from 'iothread-*' cases
Remove disks which are not necessary to demonstrate iothread config.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-06 13:22:37 +01:00
Peter Krempa
8442645126 qemuxml2(argv|xmltest): Simplify testing of scheduler settings
Remove the cputune-iothreads, cputune-iothreadsched-zeropriority,
cputune-iothreadsched test files by moving the relevant elements into
the cputune case as we can setup scheduler settings for multiple objects
and thus test everything in one go.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-06 13:22:36 +01:00
Peter Krempa
d542d72f5c qemuxml2(argv|xml)test: Modernize 'cputune' test cases
Use DO_TEST_CAPS_LATEST for cputune-numatune, cputune-zero-shares,
cputune, and vcpu-placement-static cases. Do the necessary tweaks to
work with actual data.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-06 13:22:36 +01:00
Peter Krempa
17bc74e02d qemuxml2xmltest: Modernize iothread CWW/SCSI test cases
The argv counterparts are already modernized.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-06 13:22:36 +01:00
Peter Krempa
dcab6ad185 qemuxml2argvtest: Modernize the rest of 'iohtreads-*'
Use DO_TEST_CAPS_LATEST for the basic tests. The emulator needed to be
tweaked to work with the real caps data.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-06 13:22:36 +01:00
Peter Krempa
ebc3323248 qemuxml2(argv|xml)test: Remove 'iothreads' case
'iothreads-disk' covers everything that 'iothreads' did in addition to
actually using the iothread.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-03-06 13:22:36 +01:00
Andrea Bolognani
44fb7659cc tests: Add more firmware tests
These cover various scenarios related to firmware formats,
specifically ensuring that all the ways in which the user can
ask for a non-default format to be used work correctly.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-03-03 13:52:37 +01:00