We've hit issues with GitLab CI jobs reporting a failure despite
the corresponding Cirrus CI job finishing successfully: this is
apparently caused by the underlying VM being rescheduled.
A workaround for this issue has been implemented as of
5299874bbb
which will be included in the upcoming 0.3.0 release; however, in
order to validate that this workaround is effective it would be
useful to have more data.
Based on the conversation in
https://github.com/sio/cirrus-run/issues/4
enabling verbose mode allows to collect this data while not having
any impact on performance, so let's enable it temporarily and then
disable it again once cirrus-run 0.3.0 is out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This feature has been implemented as of
b9b2278f1d
and will be included in the upcoming 0.3.0 release.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The header log_manager.h doesn't use anything from log_protocol.h and
the only other place than logging using log_protocol.h is qemu_command.c
where we can include log_protocol.h directly to have enum value
VIR_LOG_MANAGER_PROTOCOL_DOMAIN_OPEN_LOG_FILE_TRUNCATE available.
Fixes race-condition compilation error with meson:
In file included from ../tests/qemuhotplugmock.c:21:
In file included from ../src/qemu/qemu_hotplug.h:25:
In file included from ../src/qemu/qemu_domain.h:42:
../src/logging/log_manager.h:25:10: fatal error: 'logging/log_protocol.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Reported-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
During the switch to meson, one of the patches mistakenly changed the
runtime socket prefix for {libvirtd, virtproxyd} to "libvirtd-" from
the original "libvirt-". Not to be mistaken with the systemd unit name
which actually follows the daemon name, IOW the systemd unit name
remains as e.g. "libvirtd.socket", but the actual unix socket created
on the filesystem that the daemon binds to must be named "libvirt-sock"
and not "libvirtd-sock".
Fixes: dd4f2c73ad
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can use qemuDomainSetupInput() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupRNG() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupChardev() to obtain the path that we
need to unlink() from within domain's namespace. Note, while
previously we unlinked only VIR_DOMAIN_CHR_TYPE_DEV chardevs,
with this change we unlink some other types too - exactly those
types we created when plugging the device in.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupMemory() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In my attempt to deduplicate the code, we can use
qemuDomainSetupHostdev() to obtain the list of paths to unlink
and then pass it to qemuDomainNamespaceUnlinkPaths() to unlink
them in a single fork.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far, the only caller qemuDomainNamespaceUnlinkPath() will
always pass a single path to unlink, but similarly to
qemuDomainNamespaceMknodPaths() - there are a few callers that
would like to pass two or more files to unlink at once (held in a
string list). Make the @paths argument a string list then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simirarly to qemuDomainAttachDeviceMknodHelper() which was
modified just a couple of commits ago, modify the unlink helper
which is called on device detach so that it can unlink multiple
files in one go instead of forking off for every single one of
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup, creating /dev nodes from pre-exec hook is
no longer needed and thus can be removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain SEV into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain loader into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain RNGs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain inputs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain graphics (render node)
into daemon's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain TPM into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain chardevs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain memory (nvdimms) into
daemon's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain hostdevs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain disks into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in previous commit, populating domain's namespace
from pre-exec() hook is dangerous. This commit moves population
of the namespace with basic /dev nodes (e.g. /dev/null, /dev/kvm,
etc.) into daemon's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Okay, here is the deal. Currently, the way we build namespace is
very fragile. It is done from pre-exec hook when starting a
domain, after we mass closed all FDs and before we drop
privileges and exec() QEMU. This fact poses some limitations onto
the namespace build code, e.g. it has to make sure not to keep
any FD opened (not even through a library call), because it would
be leaked to QEMU. Also, it has to call only async signal safe
functions. These requirements are hard to meet - in fact as of my
commit v6.2.0-rc1~235 we are leaking a FD into QEMU by calling
libdevmapper functions.
To solve this issue and avoid similar problems in the future, we
should change our paradigm. We already have functions which can
populate domain's namespace with nodes from the daemon context.
If we use them to populate the namespace and keep only the bare
minimum in the pre-exec hook, we've mitigated the risk.
Therefore, the old qemuDomainBuildNamespace() is renamed to
qemuDomainUnshareNamespace() and new qemuDomainBuildNamespace()
function is introduced. So far, the new function is basically a
NOP and domain's namespace is still populated from the pre-exec
hook - next patches will fix it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim to make it look as close to
qemuDomainNamespaceSetupDisk() as possible. The latter will call
the former and this change makes that diff easier to read.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller does the same - counts the number of items in a
string list they have, only to pass the number to
qemuDomainNamespaceMknodPaths(). This is needless - the function
can accept the string list and count the items itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the previous commit prepared the helper function run in a
forked off helper (with corresponding struct), this commit
modifies the caller, which now create all files requested in a
single process and does not fork off for every single path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far, when attaching a device needs two or more /dev nodes
created into a domain, we fork off and run the helper for every
node separately. For majority of devices this is okay, because
they need no or one node created anyway. But the idea is to use
this attach code to build the namespace when starting a domain,
in which case there will be way more nodes than one.
To achieve this, the recursive approach for handling symlinks has
to be turned into an iterative one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When attaching a device into a domain, the corresponding /dev
node might need to be created in the domain's namespace. For some
types of files we call mknod(), for symlinks we call symlink(),
but for others - which exist in the host namespace - we need to
so called 'bind mount' them (which is a way of passing a
file/directory between mount namespaces). There is this condition
in qemuDomainAttachDeviceMknodRecursive() which decides whether a
bind mount will be used, move it into a separate function so that
it can be reused later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This structure is going to be used from not only device attach
code, but also when building the namespace. Moreover, the code
lives in a separate file so the chances of clashing with another
name are minimal.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's not really a problem since this is a helper process that
dies as soon as the helper function returns, but the cleanup code
will be replaced with a function soon and this change prepares
the code for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemuDomainNamespaceMknodPaths() doesn't actually create
files in the namespace in one go (it forks for each path), it a
few commits time it will.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Functions that create a device node after domain startup (used
from hotplug) will get a list of paths they want to create and
eventually call qemuDomainNamespaceMknodPaths() which then checks
whether domain mount namespace is enabled in the first place.
Alternatively, on device hotunplug, we might want to delete a
path inside domain namespace in which case
qemuDomainNamespaceUnlinkPaths() checks whether the namespace is
enabled. While this is not dangerous, it certainly burns a couple
of CPU cycles needlessly.
Check whether mount namespace is enabled upfront.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is a lot of functions called from
qemuDomainBuildNamespace() that accept @cfg
(virQEMUDriverConfigPtr) as an argument and don't use it.
Historically, it was done so that all qemuDomainSetupAll*()
functions look the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The name of this function is not very helpful, because it doesn't
create anything, it just flips a bit in a bitmask when domain is
starting up. Move the function internals into qemu_process.c and
forget the function ever existed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu_domain.c file is big as is and we should split it into
separate semantic blocks. Start with code that handles domain
namespaces.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'docutils' add line saying "Contents:" on top of the table of contents.
We don't have that in other documents nor it's really necessary. Hide it
in the stylesheet as we can select it easily.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The table of contents of documents generated from RST is quite squeezed
together. Add 2em-s worth of vertical separation on each side.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Docutils don't generate <code> for inline literals (``blah``) in rst
but rather put them in the '.literal' class. Add a selector for making
them bold when used in definition list headers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'docutils' add a stylesheet to the output html file for direct
consumption. Since we use the html files just as an intermediate step
which is post-processed to add our own stylesheet and drop the docutils
one in the process we can ask 'rst2html' to not add any for an
intermediate file with less garbage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Show various usage of filters including some useful examples.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Promote the 'What to attach?' section to a first level heading and
request also the XML config of a VM, coredump backtrace if something
crashed and ask to not tear down the environment for the possibility to
ask for additional data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
NEWS.rst is based in the root of the repository and 'hvsupport.html'
doesn't have a backing file which can be edited since it's fully
generated. Our 'contribute -> edit this page' link on the bottom of the
page is wrong in those cases.
Fix it by adding the contribute section only when there's a source and
base the 'source' of a html file in the root of the repository.
Along with that we need to modify the scripts/meson-html-gen.py script
to accept optional 'pagesrc' and the XSL template to skip the
'contribute' section when we don't have a source.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just convert 'docs_html_in_files' into 'docs_html_in_gen'. The target
definitions for those were almost the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These variables are only used for assignment and have
no other effect.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
