usbFindDevice():get usb device according to
idVendor, idProduct, bus, device
it is the exact match of the four parameters
usbFindDeviceByBus():get usb device according to bus, device
it returns only one usb device same as usbFindDevice
usbFindDeviceByVendor():get usb device according to idVendor,idProduct
it probably returns multiple usb devices.
usbDeviceSearch(): a helper function to do the actual search
Most of our errors complaining about an inability to support a
particular action due to qemu limitations used CONFIG_UNSUPPORTED,
but we had a few outliers. Reported by Jiri Denemark.
* src/qemu/qemu_command.c (qemuBuildDriveDevStr): Prefer
CONFIG_UNSUPPORTED.
* src/qemu/qemu_driver.c (qemuDomainReboot)
(qemuDomainBlockJobImpl): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciControllerDevice):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction)
(qemuMonitorBlockJob, qemuMonitorSystemWakeup): Likewise.
Originally, qemuDomainCheckEjectableMedia was entering monitor with qemu
driver lock. Commit 2067e31bf9, which I
made to fix that, revealed another issue we had (but didn't notice it
since the driver was locked): we didn't set nested job when
qemuDomainCheckEjectableMedia is called during migration. Thus the
original fix I made was wrong.
This patch was created to resolve this upstream bug:
https://bugzilla.redhat.com/show_bug.cgi?id=784767
and is at least a partial solution to this RHEL RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
Previously the only attribute of a network device that could be
modified by virUpdateDeviceFlags() ("virsh update-device") was the
link state; attempts to change any other attribute would log an error
and fail.
This patch adds recognition of a change in bridge device name, and
supports reconnecting the guest's interface to the new device.
Standard audit logs for detaching and attaching a network device are
also generated. Although the current auditing function doesn't log the
bridge being attached to, this will later be changed in a separate
patch.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This avoids possible deadlock of the qemu driver in case a domain is
begin migrated (in Begin phase) and unrelated connection to qemu driver
is closed at the right time.
I checked all callers of qemuDomainCheckEjectableMedia() and they are
calling this function with qemu driver locked.
In qemuDomainDetachNetDevice, detach was being used before it had been
validated. If no matching device was found, this resulted in a
dereference of a NULL pointer.
This behavior was a regression introduced in commit
cf90342be0, so it has not been a part of
any official libvirt release.
There are several functions in domain_conf.c that remove a device
object from the domain's list of that object type, but don't free the
object or return it to the caller to free. In many cases this isn't a
problem because the caller already had a pointer to the object and
frees it afterward, but in several cases the removed object was just
left floating around with no references to it.
In particular, the function qemuDomainDetachDeviceConfig() calls
functions to locate and remove net (virDomainNetRemoveByMac), disk
(virDomainDiskRemoveByName()), and lease (virDomainLeaseRemove())
devices, but neither it nor its caller qemuDomainModifyDeviceConfig()
ever obtain a pointer to the device being removed, much less free it.
This patch modifies the following "remove" functions to return a
pointer to the device object being removed from the domain device
arrays, to give the caller the option of freeing the device object
using that pointer if needed. In places where the object was
previously leaked, it is now freed:
virDomainDiskRemove
virDomainDiskRemoveByName
virDomainNetRemove
virDomainNetRemoveByMac
virDomainHostdevRemove
virDomainLeaseRemove
virDomainLeaseRemoveAt
The functions that had been leaking:
libxlDomainDetachConfig - leaked a virDomainDiskDef
qemuDomainDetachDeviceConfig - could leak a virDomainDiskDef,
a virDomainNetDef, or a
virDomainLeaseDef
qemuDomainDetachLease - leaked a virDomainLeaseDef
There were certain paths through the hostdev detach code that could
lead to the lower level function failing (and not removing the object
from the domain's hostdevs list), but the higher level function
free'ing the hostdev object anyway. This would leave a stale
hostdevdef pointer in the list, which would surely cause a problem
eventually.
This patch relocates virDomainHostdevRemove from the lower level
functions qemuDomainDetachThisHostDevice and
qemuDomainDetachHostPciDevice, to their caller
qemuDomainDetachThisHostDevice, placing it just before the call to
virDomainHostdevDefFree. This makes it easy to verify that either both
operations are done, or neither.
NB: The "dangling pointer" part of this problem was introduced in
commit 13d5a6, so it is not present in libvirt versions prior to
0.9.9. Earlier versions would return failure in certain cases even
though the the device object was removed/deleted, but the removal and
deletion operations would always both happen or neither.
These changes are applied only if the hostdev has a parent net device
(i.e. if it was defined as "<interface type='hostdev'>" rather than
just "<hostdev>"). If the parent netdevice has virtual port
information, the original virtualport associate functions are called
(these set and restore both mac and port profile on an
interface). Otherwise, only mac address is set on the device.
Note that This is only supported for SR-IOV Virtual Functions (not for
standard PCI or USB netdevs), and virtualport association is only
supported for 802.1Qbh. For all other types of cards and types of
virtualport, a "Config Unsupported" error is returned and the
operation fails.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
qemuDomainAttachNetDevice
- re-ordered some things at start of function because
networkAllocateActualDevice should always be run and a slot
in def->nets always allocated, but host_net_add isn't needed
if the actual type is hostdev.
- if actual type is hostdev, defer to
qemuDomainAttachHostDevice (which will reach up to the NetDef
for things like MAC address when necessary). After return
from qemuDomainAttachHostDevice, slip directly to cleanup,
since the rest of the function is specific to emulated net
devices.
- put assignment of new NetDef into expanded def->nets down
below cleanup: (but only on success) since it is also needed
for emulated and hostdev net devices.
qemuDomainDetachHostDevice
- after locating the exact device to detach, check if it's a
network device and, if so, use toplevel
qemuDomainDetachNetDevice instead so that the def->nets list
is properly updated, and 'actual device' properly returned to
network pool if appropriate. Otherwise, for normal hostdevs,
call the lower level qemuDomainDetachThisDevice.
qemuDomainDetachNetDevice
- This is where it gets a bit tricky. After locating the device
on the def->nets list, if the network device type == hostdev,
call the *lower level* qemuDomainDetachThisDevice (which will
reach back up to the parent net device for MAC address /
virtualport when appropriate, then clear the device out of
def->hostdevs) before skipping past all the emulated
net-device-specific code to cleanup:, where the network
device is removed from def->nets, and the network device
object is freed.
In short, any time a hostdev-type network device is detached, we must
go through the toplevel virDomaineDetachNetDevice function first and
last, to make sure 1) the def->nnets list is properly managed, and 2)
any device allocated with networkAllocateActualDevice is properly
freed. At the same time, in the middle we need to go through the
lower-level vidDomainDetach*This*HostDevice to be sure that 1) the
def->hostdevs list is properly managed, 2) the PCI device is properly
detached from the guest and reattached to the host (if appropriate),
and 3) any higher level teardown is called at the appropriate time, by
reaching back up to the NetDef config (part (3) will be covered in a
separate patch).
This refactoring is necessary to support hotplug detach of
type=hostdev network devices, but needs to be in a separate patch to
make potential debugging of regressions more practical.
Rather than the lowest level functions searching for a matching
device, the search is now done in the toplevel function, and an
intermediate-level function (qemuDomainDetachThisHostDevice()), which
expects that the device's entry is already found, is called (this
intermediate function will be called by qemuDomainDetachNetDevice() in
order to support detach of type=hostdev net devices)
This patch should result in 0 differences in functionality.
In order to allow for a virDomainHostdevDef that uses the
virDomainDeviceInfo of a "higher level" device (such as a
virDomainNetDef), this patch changes the virDomainDeviceInfo in the
HostdevDef into a virDomainDeviceInfoPtr. Rather than adding checks
all over the code to check for a null info, we just guarantee that it
is always valid. The new function virDomainHostdevDefAlloc() allocates
a virDomainDeviceInfo and plugs it in, and virDomainHostdevDefFree()
makes sure it is freed.
There were 4 places allocating virDomainHostdevDefs, all of them
parsers of one sort or another, and those have all had their
VIR_ALLOC(hostdev) changed to virDomainHostdevDefAlloc(). Other than
that, and the new functions, all the rest of the changes are just
mechanical removals of "&" or changing "." to "->".
There will be cases where the iterator callback will need to know the
type of the device whose info is being operated on, and possibly even
need to use some of the device's config. This patch adds a
virDomainDeviceDefPtr to the args of every callback, and fills it in
appropriately as the devices are iterated through.
The virDomainDeviceInfoPtrs in qemuCollectPCIAddress and
qemuComparePCIDevice are named "dev" and "dev1", but those functions
will be changed (in order to match a change in the args sent to
virDomainDeviceInfoIterate() callback args) to contain a
virDomainDeviceDefPtr device.
This patch renames "dev" to "info" (and "dev[n]" to "info[n]") to
avoid later confusion.
For any disk controller model which is not "lsilogic", the command
line will be like:
-drive file=/dev/sda,if=none,id=drive-scsi0-0-3-0,format=raw \
-device scsi-disk,bus=scsi0.0,channel=0,scsi-id=3,lun=0,i\
drive=drive-scsi0-0-3-0,id=scsi0-0-3-0
The relationship between the libvirt address attrs and the qdev
properties are (controller model is not "lsilogic"; strings
inside <> represent libvirt adress attrs):
bus=scsi<controller>.0
channel=<bus>
scsi-id=<target>
lun=<unit>
* src/qemu/qemu_command.h: (New param "virDomainDefPtr def"
for function qemuBuildDriveDevStr; new param "virDomainDefPtr
vmdef" for function qemuAssignDeviceDiskAlias. Both for
virDomainDiskFindControllerModel's use).
* src/qemu/qemu_command.c:
- New param "virDomainDefPtr def" for qemuAssignDeviceDiskAliasCustom.
For virDomainDiskFindControllerModel's use, if the disk bus is "scsi"
and the controller model is not "lsilogic", "target" is one part of
the alias name.
- According change on qemuAssignDeviceDiskAlias and qemuBuildDriveDevStr
* src/qemu/qemu_hotplug.c:
- Changes to be consistent with declarations of qemuAssignDeviceDiskAlias
qemuBuildDriveDevStr, and qemuBuildControllerDevStr.
* tests/qemuxml2argvdata/qemuxml2argv-pseries-vio-user-assigned.args,
tests/qemuxml2argvdata/qemuxml2argv-pseries-vio.args: Update the
generated command line.
In qemuDomainAttachNetDevice, the guest's tap interface has only been
attached to the bridge if iface_connected is true. It's possible for
an error to occur prior to that happening, and previously we would
attempt to remove the tap interface from the bridge even if it hadn't
been attached.
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
QEMU always sends details about all available block devices as an answer
for "info block"/"query-block" command. On the other hand, our
qemuMonitorGetBlockInfo was made for a single block devices queries
only. Thus, when asking for multiple devices, we asked qemu multiple
times to always get the same answer from which different parts were
filtered. This patch makes qemuMonitorGetBlockInfo return a hash table
of all block devices, which may later be used for getting details about
specific devices.
pciTrySecondaryBusReset checks if there is active device on the
same bus, however, qemu driver doesn't maintain an effective
list for the inactive devices, and it passes meaningless argument
for parameter "inactiveDevs". e.g. (qemuPrepareHostdevPCIDevices)
if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
return -1;
..skipped...
if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
goto reattachdevs;
NB, the "pcidevs" used above are extracted from domain def, and
thus one won't be able to attach a device of which bus has other
device even detached from host (nodedev-detach). To see more
details of the problem:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=773667
This patch is to resolve the problem by introducing an inactive
PCI device list (just like qemu_driver->activePciHostdevs), and
the whole logic is:
* Add the device to inactive list during nodedev-dettach
* Remove the device from inactive list during nodedev-reattach
* Remove the device from inactive list during attach-device
(for non-managed device)
* Add the device to inactive list after detach-device, only
if the device is not managed
With the above, we have a sufficient inactive PCI device list, and thus
we can use it for pciResetDevice. e.g.(qemuPrepareHostdevPCIDevices)
if (pciResetDevice(dev, driver->activePciHostdevs,
driver->inactivePciHostdevs) < 0)
goto reattachdevs;
When sVirt is integrated with the LXC driver, it will be neccessary
to invoke the security driver APIs using only a virDomainDefPtr
since the lxc_container.c code has no virDomainObjPtr available.
Aside from two functions which want obj->pid, every bit of the
security driver code only touches obj->def. So we don't need to
pass a virDomainObjPtr into the security drivers, a virDomainDefPtr
is sufficient. Two functions also gain a 'pid_t pid' argument.
* src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/security/security_apparmor.c,
src/security/security_dac.c,
src/security/security_driver.h,
src/security/security_manager.c,
src/security/security_manager.h,
src/security/security_nop.c,
src/security/security_selinux.c,
src/security/security_stack.c: Change all security APIs to use a
virDomainDefPtr instead of virDomainObjPtr
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.
As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.
device='lun' is identical to the default device='disk', except that:
1) It is only allowed if bus='virtio', type='block', and the qemu
version is "new enough" to support it ("new enough" == qemu 0.11 or
better), otherwise the domain will fail to start and a
CONFIG_UNSUPPORTED error will be logged).
2) The option "scsi=on" will be added to the -device arg to allow
SG_IO commands (if device !='lun', "scsi=off" will be added to the
-device arg so that SG_IO commands are specifically forbidden).
Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.
*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter
*src/qemu/qemu_(command|driver|hotplug).c - treat
VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.
Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=638633
Although scripts are not used by interfaces of type other than
"ethernet" in qemu, due to the fact that the parser stores the script
name in a union that is only valid when type is ethernet or bridge,
there is no way for anyone except the parser itself to catch the
problem of specifying an interface script for an inappropriate
interface type (by the time the parsed data gets back to the code that
called the parser, all evidence that a script was specified is
forgotten).
Since the parser itself should be agnostic to which type of interface
allows scripts (an example of why: a script specified for an interface
of type bridge is valid for xen domains, but not for qemu domains),
the solution here is to move the script out of the union(s) in the
DomainNetDef, always populate it when specified (regardless of
interface type), and let the driver decide whether or not it is
appropriate.
Currently the qemu, xen, libxml, and uml drivers recognize the script
parameter and do something with it (the uml driver only to report that
it isn't supported). Those drivers have been updated to log a
CONFIG_UNSUPPORTED error when a script is specified for an interface
type that's inappropriate for that particular hypervisor.
(NB: There was earlier discussion of solving this problem by adding a
VALIDATE flag to all libvirt APIs that accept XML, which would cause
the XML to be validated against the RNG files. One statement during
that discussion was that the RNG shouldn't contain hypervisor-specific
things, though, and a proper solution to this problem would require
that (again, because a script for an interface of type "bridge" is
accepted by xen, but not by qemu).
Currently, on device detach, we parse given XML, find the device
in domain object, free it and try to restore security labels.
However, in some cases (e.g. usb hostdev) parsed XML contains
less information than freed device. In usb case it is bus & device
IDs. These are needed during label restoring as a symlink into
/dev/bus is generated from them. Therefore don't drop device
configuration until security labels are restored.
This patch fixes two problems:
1) The device will be reattached to host even if it's not
managed, as there is a "pciDeviceSetManaged".
2) The device won't be reattached to host with original
driver properly. As it doesn't honor the device original
properties which are maintained by driver->activePciHostdevs.
Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile
To make way for renaming the other macvlan creation APIs in
interface.c
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
Rename APIs
Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers
* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
paths & remove conditional compilation
In preparation for code re-organization, rename the Macvtap
management APIs to have the following patterns
virNetDevMacVLanXXXXX - macvlan/macvtap interface management
virNetDevVPortProfileXXXX - virtual port profile management
* src/util/macvtap.c, src/util/macvtap.h: Rename APIs
* src/conf/domain_conf.c, src/network/bridge_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_command.h,
src/qemu/qemu_driver.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/qemu/qemu_process.c,
src/qemu/qemu_process.h: Update for renamed APIs
Rename the virVirtualPortProfileParams struct to be
virNetDevVPortProfile, and rename the APIs to match
this prefix.
* src/util/network.c, src/util/network.h: Rename port profile
APIs
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/network_conf.c, src/conf/network_conf.h,
src/network/bridge_driver.c, src/qemu/qemu_hotplug.c,
src/util/macvtap.c, src/util/macvtap.h: Update for
renamed APIs/structs
The qemu RBD driver needs access to the conn in order to get the secret
needed for connecting to the ceph cluster.
Signed-off-by: Sage Weil <sage@newdream.net>
Detected by Coverity. The fix in 2c27dfa didn't catch all bad
instances of memcpy(). Thankfully, on further analysis, all of
the problematic uses are only triggered by old qemu that lacks
-device.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciDiskDevice)
(qemuDomainAttachNetDevice, qemuDomainAttachHostPciDevice): Init
all fields since monitor only populates some of them.
Detected by Coverity. Both text and JSON monitors set only the
bus and unit fields, which means driveAddr.controller spends
life as garbage on the stack, and is then memcpy()'d into the
in-memory representation which the user can see via dumpxml.
* src/qemu/qemu_hotplug.c (qemuDomainAttachSCSIDisk): Only copy
defined fields.
When failing on starting a domain, it tries to reattach all the PCI
devices defined in the domain conf, regardless of whether the devices
are still used by other domain. This will cause the devices to be deleted
from the list qemu_driver->activePciHostdevs, thus the devices will be
thought as usable even if it's not true. And following commands
nodedev-{reattach,reset} will be successful.
How to reproduce:
1) Define two domains with same PCI device defined in the confs.
2) # virsh start domain1
3) # virsh start domain2
4) # virsh nodedev-reattach $pci_device
You will see the device will be reattached to host successfully.
As pciDeviceReattach just check if the device is still used by
other domain via checking if the device is in list driver->activePciHostdevs,
however, the device is deleted from the list by step 2).
This patch is to prohibit the bug by:
1) Prohibit a domain starting or device attachment right at
preparation period (qemuPrepareHostdevPCIDevices) if the
device is in list driver->activePciHostdevs, which means
it's used by other domain.
2) Introduces a new field for struct _pciDevice, (const char *used_by),
it will be set as the domain name at preparation period,
(qemuPrepareHostdevPCIDevices). Thus we can prohibit deleting
the device from driver->activePciHostdevs if it's still used by
other domain when stopping the domain process.
* src/pci.h (define two internal functions, pciDeviceSetUsedBy and
pciDevceGetUsedBy)
* src/pci.c (new field "const char *used_by" for struct _pciDevice,
implementations for the two new functions)
* src/libvirt_private.syms (Add the two new internal functions)
* src/qemu_hostdev.h (Modify the definition of functions
qemuPrepareHostdevPCIDevices, and qemuDomainReAttachHostdevDevices)
* src/qemu_hostdev.c (Prohibit preparation and don't delete the
device from activePciHostdevs list if it's still used by other domain)
* src/qemu_hotplug.c (Update function usage, as the definitions are
changed)
Signed-off-by: Eric Blake <eblake@redhat.com>
If the daemon is restarted so we reconnect to monitor, cdrom media
can be ejected. In that case we don't want to show it in domain xml,
or require it on migration destination.
To check for disk status use 'info block' monitor command.
This patch enables modifying network device configuration using the
virUpdateDeviceFlags API method. Matching of devices is accomplished
using MAC addresses.
While updating live configuration of a running domain, the user is
allowed only to change link state of the interface. Additional
modifications may be added later. For now the code checks for
unsupported changes and thereafter changes the link state, if
applicable.
When updating persistent configuration of guest's network interface the
whole configuration (except for the MAC address) may be modified and
is stored for the next startup.
* src/qemu/qemu_driver.c - Add dispatching of virUpdateDevice for
network devices update (live/config)
* src/qemu/qemu_hotplug.c - add setting of initial link state on live
device addition
- add function to change network device
configuration. By now it supports only
changing of link state
* src/qemu/qemu_hotplug.h - Headers to above functions
* src/qemu/qemu_process.c - set link states before virtual machine
start. Qemu does not support setting of
this on the command line.
Snapshots alter the set of disk image files opened by qemu, so
they must be audited. But they don't involve a full disk definition
structure, just the new filename. Make the next patch easier by
refactoring the audit routines to just operate on file name.
* src/conf/domain_audit.h (virDomainAuditDisk): Update prototype.
* src/conf/domain_audit.c (virDomainAuditDisk): Act on strings,
not definition structures.
(virDomainAuditStart): Update caller.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia)
(qemuDomainAttachPciDiskDevice, qemuDomainAttachSCSIDisk)
(qemuDomainAttachUsbMassstorageDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachDiskDevice):
Likewise.
Otherwise the device will still be bound to pci-stub driver even
it's set as "managed=yes" when do detaching. Of course, it won't
triger any driver reprobing too.
Currently, we attempt to run sync job and async job at the same time. It
means that the monitor commands for two jobs can be run in any order.
In the function qemuDomainObjEnterMonitorInternal():
if (priv->job.active == QEMU_JOB_NONE && priv->job.asyncJob) {
if (qemuDomainObjBeginNestedJob(driver, obj) < 0)
We check whether the caller is an async job by priv->job.active and
priv->job.asynJob. But when an async job is running, and a sync job is
also running at the time of the check, then priv->job.active is not
QEMU_JOB_NONE. So we cannot check whether the caller is an async job
in the function qemuDomainObjEnterMonitorInternal(), and must instead
put the burden on the caller to tell us when an async command wants
to do a nested job.
Once the burden is on the caller, then only async monitor enters need
to worry about whether the VM is still running; for sync monitor enter,
the internal return is always 0, so lots of ignore_value can be dropped.
* src/qemu/THREADS.txt: Reflect new rules.
* src/qemu/qemu_domain.h (qemuDomainObjEnterMonitorAsync): New
prototype.
* src/qemu/qemu_process.h (qemuProcessStartCPUs)
(qemuProcessStopCPUs): Add parameter.
* src/qemu/qemu_migration.h (qemuMigrationToFile): Likewise.
(qemuMigrationWaitForCompletion): Make static.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal): Add
parameter.
(qemuDomainObjEnterMonitorAsync): New function.
(qemuDomainObjEnterMonitor, qemuDomainObjEnterMonitorWithDriver):
Update callers.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemudDomainCoreDump, doCoreDump, processWatchdogEvent)
(qemudDomainSuspend, qemudDomainResume, qemuDomainSaveImageStartVM)
(qemuDomainSnapshotCreateActive, qemuDomainRevertToSnapshot):
Likewise.
* src/qemu/qemu_process.c (qemuProcessStopCPUs)
(qemuProcessFakeReboot, qemuProcessRecoverMigration)
(qemuProcessRecoverJob, qemuProcessStart): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationToFile)
(qemuMigrationWaitForCompletion, qemuMigrationUpdateJobStatus)
(qemuMigrationJobStart, qemuDomainMigrateGraphicsRelocate)
(doNativeMigrate, doTunnelMigrate, qemuMigrationPerformJob)
(qemuMigrationPerformPhase, qemuMigrationFinish)
(qemuMigrationConfirm): Likewise.
* src/qemu/qemu_hotplug.c: Drop unneeded ignore_value.
The domain XML now understands the <listen> subelement of its
<graphics> element (including when listen type='network'), and the
network driver has an internal API that will turn a network name into
an IP address, so the final logical step is to put the glue into the
qemu driver so that when it is starting up a domain, if it finds
<listen type='network' network='xyz'/> in the XML, it will call the
network driver to get an IPv4 address associated with network xyz, and
tell qemu to listen for vnc (or spice) on that address rather than the
default address (localhost).
The motivation for this is that a large installation may want the
guests' VNC servers listening on physical interfaces rather than
localhost, so that users can connect directly from the outside; this
requires sending qemu the appropriate IP address to listen on. But
this address will of course be different for each host, and if a guest
might be migrated around from one host to another, it's important that
the guest's config not have any information embedded in it that is
specific to one particular host. <listen type='network.../> can solve
this problem in the following manner:
1) on each host, define a libvirt network of the same name,
associated with the interface on that host that should be used
for listening (for example, a simple macvtap network: <forward
mode='bridge' dev='eth0'/>, or host bridge network: <forward
mode='bridge'/> <bridge name='br0'/>
2) in the <graphics> element of each guest's domain xml, tell vnc to
listen on the network name used in step 1:
<graphics type='vnc' port='5922'>
<listen type='network'network='example-net'/>
</graphics>
(all the above also applies for graphics type='spice').
