Drop the last enum member VSH_OFLAG_NONE and remove the 'flags' variable
from vshCmdOptDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch the command parser from using the VSH_OFLAG_REQ_OPT flag
opting out from positional parsing of arguments to a combination of the
'positional' flags for truly positional arguments and
'unwanted_positional' preserving semantics for the existing arguments
where the parser did it due to bad design.
This patch retires VSH_OFLAG_REQ_OPT along with the infrastructure that
was needed to refactor all uses properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the command parser in virsh parses/fills even optional
arguments with values as if they were positional unless opted out using
VSH_OFLAG_REQ_OPT. This creates unexpected situations when commands can
break in this unwanted semantics:
$ virsh snapshot-create-as --print-xml 1 2 3
<domainsnapshot>
<name>2</name>
<description>3</description>
</domainsnapshot>
To prevent any further addition annotate the rest of the arguments with
the 'unwanted_positional' flag, so that the parser can keep parsing them
as such but any further optional argument will not have this behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make certain optional arguments truly positional in cases when it makes
semantic sense.
Previously it wasn't possible to have optional positional arguments, but
the parser filled them regardless, thus this preserves functionality.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Annotate arguments which can be unintentionally parsed positionally.
(See previous commits for explanation.)
Currently virsh accepts the arguments such as:
$ virsh attach-disk --print-xml 1 2 3 4 5 6 7 8 9 10
<disk type='file' device='10'>
<driver name='5' type='6' iothread='7' cache='8' io='9'/>
<source file='2'/>
<target dev='3' bus='4'/>
</disk>
While making virsh require the flags is technically a breaking change,
there were multiple instances where arguments were added to the argument
list thus changing the order the positional arguments would be
interpreted as. Examples are commits: 7e157858b4, bc5a8090af,
ca21d75d25. As of such there are multiple breaks of compatibility for
the positional arguments.
As of such, require the option flag for all optional arguments with
value for 'virsh attach-disk'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Annotate arguments which can be unintentionally parsed positionally.
(See previous commits for explanation.)
Annotate '--migrateuri', '--graphicsuri', '--listen-address', '-dname',
'--timeout', '--xml', '--migrate-disks' and '--disks port' as
'unwanted_positional'. These were declared in chronological order per
git history.
All others are annotated with VSH_OFLAG_REQ_OPT which makes the parser
require the '--optionname'. This is due to the fact that '--disks-uri'
was introduced later and put in front of others declared earlier
breaking the order they would be accepted, thus changing the behaviour
between versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make all of the tunable parameter flags require the option name (don't
parse them positionally).
While techically this would be a breaking change if anyone were to
specify the tunable values positionally this is not the case as the
first two tunables are not compatible with each other:
$ virsh blkdeviotune cd vda 4 5
error: Unable to change block I/O throttle
error: invalid argument: total and read/write of bytes_sec cannot be set at the same time
The above is produced by all implementations of the API (qemu and test
drivers). It is true that the first tunable can be specified
positionally (--total-bytes-sec) but it is misleading and shoud not be
allowed either.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In most cases it's the usual/recommended way to use those commands:
$ virsh qemu-monitor-command VMNAME cmd args args args
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will need to tweak some of the properties of the
command. Since the macro is used in just two places expand it inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As this command was introduced in this release add the flag requiring to
pass optionname.
This is needed to actually disallow positional parsing of the value
despite documenting that the flag name is required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag was replaced by the 'required' field in the option definition.
Remove last few uses and all assignments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new 'positional' field to do decisions rather than have a
special type for positional strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add 'positional' and 'required' fields to vshCmdOptDef, which will
explicitly track the two properties of arguments.
To ensure that we have proper coverage, add checks to
vshCmddefCheckInternals validating the state of the above flags by
infering it from existing data.
This conversion will allow us:
- remove VSH_OT_DATA in favor of VSH_OT_STRING
- use VSH_OT_INT when required both as positional and non-positional
- properly annotate which VSH_OT_ARGV are positional and which are not
(currently inferred by whether an previous positional option exists)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the pointers to 'help' and 'description' information in the struct
directly rather than in a key-value list.
The generic approach never got any extra use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some description of virsh commands referenced itself in a multi-line
example of usage, which is pointless as virsh help already shows how to
use the command:
.data = N_("Get or set the current memory parameters for a guest"
" domain.\n"
" To get the memory parameters use following command: \n\n"
" virsh # memtune <domain>")
Change it to just state what the command does and leave the example for
the help printer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove some code repetition between desc and net-desc commands.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When editing the title of a domain or network via the `desc` or
`net-desc` commands, we strip the final newline that is added by some
editors.
Do the same when editing the description as well.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce the domdisplay-reload command to make the domain reload
its graphics certificates
#virsh domdisplay-reload <domain> --type <type>
Signed-off-by: Zheng Yan <yanzheng759@huawei.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virshGetDBusDisplay() function is declared to return a
pointer and yet, in one error path false is returned. Switch the
statement to return NULL, which is what other error paths use to
indicate an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow users to easily resize 'raw' images on block devices to the full
capacity of the block device. Obviously this won't work on file-backed
storage (filling the remaining capacity is most likely wrong) or for
formats with metadata due to the overhead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the error message states we want to check that one of
'--copy-storage-all' or '--copy-storage-inc' is used, but the condition
mentioned VIR_MIGRATE_NON_SHARED_DISK twice.
Fixes: 1c2bd205ed
Resolves: https://issues.redhat.com/browse/RHEL-17596
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API treats them as mutually exclusive and interlocks them at the
library handler. Provide better error in virsh.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest via libvirt (`virsh create --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused transient guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest via libvirt (`virsh start --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virXMLNodeGetSubelement to find needed subelements.
In virshUpdateDiskXML this commit removes the code which keeps XML
formatting tidy, but that is not needed for the code to format proper
XMLs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Users need to enable non-shared-storage migration, otherwise the disks
specified via '--migrate-disks' will be ignored.
Add an error message to inform the users of their wrong config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the flags declaratively as in the vast majority of cases it's a
simple binary addition if the flag exists.
In one instance there was also an additional check, which was moved up
after the new code, and the error message was fixed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are some cases left after previous commit which were not
picked up by coccinelle. Mostly, becuase the spatch was not
generic enough. We are left with cases like: two variables
declared on one line, a variable declared in #ifdef-s (there are
notoriously difficult for coccinelle), arrays, macro definitions,
etc.
Finish what coccinelle started, by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
This is a more concise approach and guarantees there is
no time window where the struct is uninitialized.
Generated using the following semantic patch:
@@
type T;
identifier X;
@@
- T X;
+ T X = { 0 };
... when exists
(
- memset(&X, 0, sizeof(X));
|
- memset(&X, 0, sizeof(T));
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Add migrate options: --compression-zlib-level
--compression-zstd-level
These options are used to set compress level for "zlib"
or "zstd" during parallel migration if the compress method
is specified.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Switch from int to double for displaying job progress upto 2 decimal
places.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemu driver now accepts also _ULLONG as type for bigger numbers. Use
the 'virTypedParamListAddUnsigned' helper to use the bigger typed
parameter type if necessary to allow full range of the values while
preserving compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor to use the new data type so that we can use the APIs of it in
upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove some obvious uses of VIR_FREE in favor of automatic cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In virsh, we have this convenient domif-setlink command, which is
just a wrapper over virDomainUpdateDeviceFlags() and which allows
setting link state of given guest NIC. It does so by fetching
corresponding <interface/> XML snippet and either putting <link
state=''/> into it, OR if the element already exists setting the
attribute to desired value. The XML is then fed into the update
API.
There's, however, a small bug in detecting the pre-existence of
the element and its attribute. The code looks at "link"
attribute, while in fact, the attribute is called "state".
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/426
Fixes: e575bf082e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The return value of virXMLPropString was assigned into 'tmp' multiple
times and to prevent static analyzers moaning about a potential leak a
short-circuited if logic or was used.
Replace the code by having a helper variable for each possibility and
also replace the for-loop to iterate elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XPath lookup guarantees that the top level element is always 'disk'
so there's no need to check that it actually is. We can also remove the
two unnecessary temporary variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic pointer freeing for the 'disk_node' variable and remove
the 'cleanup' label and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic pointer freeing for the 'disk_node' variable and remove
the 'cleanup' label and 'functionReturn' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
