Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this commit
are reltaed to Network (network_conf.* and interface_conf.*) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
libvirt attempts to determine at startup time which networks are
already active, and set their active flags. Previously it has done
this by assuming that all networks are inactive, then setting the
active flag if the network has a bridge device associated with it and
that bridge device exists. This is not useful for macvtap and hostdev
based networks, since they do not use a bridge device.
Of course the reason that such a check had to be done was that the
presence of a status file in the network "stateDir" couldn't be
trusted as an indicator of whether or not a network was active. This
was due to the network driver mistakenly using
/var/lib/libvirt/network to store the status files, rather than
/var/run/libvirt/network (similar to what is done by every other
libvirt driver that stores status xml for its objects). The difference
is that /var/run is cleared out when the host reboots, so you can be
assured that the state file you are seeing isn't just left over from a
previous boot of the host.
Now that the network driver has been switched to using
/var/run/libvirt/network for status, we can also modify it to assume
that any network with an existing status file is by definition active
- we do this when reading the status file. To fine tune the results,
networkFindActiveConfigs() is changed to networkUpdateAllState(),
and only sets active = 0 if the conditions for particular network
types are *not* met.
The result is that during the first run of libvirtd after the host
boots, there are no status files, so no networks are active. Any time
libvirtd is restarted, any network with a status file will be marked
as active (unless the network uses a bridge device and that device for
some reason doesn't exist).
Experimentation showed that if virNetworkCreateXML() was called for a
network that was already defined, and then the network was
subsequently shutdown, the network would continue to be persistent
after the shutdown (expected/desired), but the original config would
be lost in favor of the transient config sent in with
virNetworkCreateXML() (which would then be the new persistent config)
(obviously unexpected/not desired).
To fix this, virNetworkObjAssignDef() has been changed to
1) properly save/free network->def and network->newDef for all the
various combinations of live/active/persistent, including some
combinations that were previously considered to be an error but didn't
need to be (e.g. setting a "live" config for a network that isn't yet
active but soon will be - that was previously considered an error,
even though in practice it can be very useful).
2) automatically set the persistent flag whenever a new non-live
config is assigned to the network (and clear it when the non-live
config is set to NULL). the libvirt network driver no longer directly
manipulates network->persistent, but instead relies entirely on
virNetworkObjAssignDef() to do the right thing automatically.
After this patch, the following sequence will behave as expected:
virNetworkDefineXML(X)
virNetworkCreateXML(X') (same name but some config different)
virNetworkDestroy(X)
At the end of these calls, the network config will remain as it was
after the initial virNetworkDefine(), whereas previously it would take
on the changes given during virNetworkCreateXML().
Another effect of this tighter coupling between a) setting a !live def
and b) setting/clearing the "persistent" flag, is that future patches
which change the details of network lifecycle management
(e.g. upcoming patches to fix detection of "active" networks when
libvirtd is restarted) will find it much more difficult to break
persistence functionality.
A patch submitted by Steven Malin last week pointed out a problem with
libvirt's DNS SRV record configuration:
https://www.redhat.com/archives/libvir-list/2014-March/msg00536.html
When searching for that message later, I found another series that had
been posted by Guannan Ren back in 2012 that somehow slipped between
the cracks:
https://www.redhat.com/archives/libvir-list/2012-July/msg00236.html
That patch was very much out of date, but also pointed out some real
problems.
This patch fixes all the noted problems by refactoring
virNetworkDNSSrvDefParseXML() and networkDnsmasqConfContents(), then
verifies those fixes by added several new records to the test case.
Problems fixed:
* both service and protocol now have an underscore ("_") prepended on
the commandline, as required by RFC2782.
<srv service='sip' protocol='udp' domain='example.com'
target='tests.example.com' port='5060' priority='10'
weight='150'/>
before: srv-host=sip.udp.example.com,tests.example.com,5060,10,150
after: srv-host=_sip._udp.example.com,tests.example.com,5060,10,150
* if "domain" wasn't specified in the <srv> element, the extra
trailing "." will no longer be added to the dnsmasq commandline.
<srv service='sip' protocol='udp' target='tests.example.com'
port='5060' priority='10' weight='150'/>
before: srv-host=sip.udp.,tests.example.com,5060,10,150
after: srv-host=_sip._udp,tests.example.com,5060,10,150
* when optional attributes aren't specified, the separating comma is
also now not placed on the dnsmasq commandline. If optional
attributes in the middle of the line are not specified, they are
replaced with a default value in the commandline (1 for port, 0 for
priority and weight).
<srv service='sip' protocol='udp' target='tests.example.com'
port='5060'/>
before: srv-host=sip.udp.,tests.example.com,5060,,
after: srv-host=_sip._udp,tests.example.com,5060
(actually the would have generated an error, because "optional"
attributes weren't really optional.)
* The allowed characters for both service and protocol are now limited
to alphanumerics, plus a few special characters that are found in
existing names in /etc/services and /etc/protocols. (One exception
is that both of these files contain names with an embedded ".", but
"." can't be used in these fields of an SRV record because it is
used as a field separator and there is no method to escape a "."
into a field.) (Previously only the strings "tcp" and "udp" were
allowed for protocol, but this restriction has been removed, since
RFC2782 specifically says that it isn't limited to those, and that
anyway it is case insensitive.)
* the "domain" attribute is no longer required in order to recognize
the port, priority, and weight attributes during parsing. Only
"target" is required for this.
* if "target" isn't specified, port, priority, and weight are not
allowed (since they are meaningless - an empty target means "this
service is *not available* for this domain").
* port, priority, and weight are now truly optional, as the comments
originally suggested, but which was not actually true.
This fixes a possible double free. In virNetworkAssignDef() if
virBitmapNew() fails, then virNetworkObjFree(network) is called.
However, with network->def pointing to actual @def. So if caller
frees @def again, ...
Moreover, this fixes one possible memory leak too. In
virInterfaceAssignDef() if appending to the list of interfaces
fails, we ought to call virInterfaceObjFree() instead of bare
VIR_FREE().
Although, in order to do that some array size variables needs
to be turned into size_t rather than int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Basically, the idea is copied from domain code, where tainting
exists for a while. Currently, only one taint reason exists -
VIR_NETWORK_TAINT_HOOK to mark those networks which caused invoking
of hook script.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the next patch I'm going to need the network format function that
takes virBuffer as argument. However, slightly change of name is more
appropriate then: virNetworkDefFormatBuf to match the rest of functions
that format an object to buffer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the network status XML we may have the <floor/> element with the
'sum' attribute. The attribute represents sum of all 'floor'-s of
computed over each interface connected to the network (this is needed to
guarantee certain bandwidth for certain domain). The sum is therefore a
number. However, if the number was mangled (e.g. by an user's
interference to network status file), we've just ignored it without
refusing to parse such file. This was all due to 'goto error' missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The previous patch fixed "forwardPlainNames" so that it really is
doing only what is intended, but left the default to be
"forwardPlainNames='no'". Discussion around the initial version of
that patch led to the decision that the default should instead be
"forwardPlainNames='yes'" (i.e. the original behavior before commit
f3886825). This patch makes that change to the default.
Currently, during XML parsing, when a call to a FromString() function to
get an enum value fails, the error which is reported is either
VIR_ERR_CONFIG_UNSUPPORTED, VIR_ERR_INTERNAL_ERROR or VIR_ERR_XML_ERROR.
This commit makes such conversion failures consistently return
VIR_ERR_CONFIG_UNSUPPORTED.
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/conf/capabilities.c: Consistently use commas.
* src/conf/domain_conf.c: Likewise.
* src/conf/network_conf.c: Likewise.
* src/conf/storage_conf.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up remaining offenders in src/conf, and their fallout.
* src/conf/snapshot_conf.h (virDomainSnapshotAssignDef)
(virDomainSnapshotFindByName): Drop attempt at const.
* src/conf/interface_conf.h (virInterfaceObjIsActive)
(virInterfaceDefFormat): Use intended type.
(virInterfaceFindByMACString, virInterfaceFindByName)
(virInterfaceAssignDef, virInterfaceRemove): Drop attempt at
const.
* src/conf/network_conf.h (virNetworkObjIsActive)
(virNetworkDefFormat, virNetworkDefForwardIf)
(virNetworkDefGetIpByIndex, virNetworkIpDefPrefix)
(virNetworkIpDefNetmask): Use intended type.
(virNetworkFindByUUID, virNetworkFindByName, virNetworkAssignDef)
(virNetworkObjAssignDef, virNetworkRemoveInactive)
(virNetworkBridgeInUse, virNetworkSetBridgeName)
(virNetworkAllocateBridge): Drop attempt at const.
* src/conf/netdev_vlan_conf.h (virNetDevVlanFormat): Make
const-correct.
* src/conf/node_device_conf.h (virNodeDeviceHasCap)
(virNodeDeviceDefFormat): Use intended type.
(virNodeDeviceFindByName, virNodeDeviceFindBySysfsPath)
(virNodeDeviceAssignDef, virNodeDeviceObjRemove)
(virNodeDeviceGetParentHost): Drop attempt at const.
* src/conf/secret_conf.h (virSecretDefFormat): Use intended type.
* src/conf/snapshot_conf.c (virDomainSnapshotAssignDef)
(virDomainSnapshotFindByName): Fix fallout.
* src/conf/interface_conf.c (virInterfaceBridgeDefFormat)
(virInterfaceBondDefFormat, virInterfaceVlanDefFormat)
(virInterfaceProtocolDefFormat, virInterfaceDefDevFormat)
(virInterfaceDefFormat, virInterfaceFindByMACString)
(virInterfaceFindByName, virInterfaceAssignDef)
(virInterfaceRemove): Likewise.
* src/conf/network_conf.c
(VIR_ENUM_IMPL, virNetworkFindByName, virNetworkObjAssignDef)
(virNetworkAssignDef, virNetworkRemoveInactive)
(virNetworkDefGetIpByIndex, virNetworkIpDefPrefix)
(virNetworkIpDefNetmask, virNetworkDHCPHostDefParseXML)
(virNetworkIpDefFormat, virNetworkRouteDefFormat)
(virPortGroupDefFormat, virNetworkForwardNatDefFormat)
(virNetworkDefFormatInternal, virNetworkBridgeInUse)
(virNetworkAllocateBridge, virNetworkSetBridgeName)
(virNetworkDNSDefFormat, virNetworkDefFormat): Likewise.
* src/conf/netdev_vlan_conf.c (virNetDevVlanFormat): Likewise.
* src/conf/node_device_conf.c (virNodeDeviceHasCap)
(virNodeDeviceFindBySysfsPath, virNodeDeviceFindByName)
(virNodeDeviceAssignDef, virNodeDeviceObjRemove)
(virNodeDeviceDefFormat, virNodeDeviceGetParentHost): Likewise.
* src/conf/secret_conf.c (virSecretDefFormatUsage)
(virSecretDefFormat): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Useful to set custom forwarders instead of using the contents of
/etc/resolv.conf. It helps me to setup dnsmasq as local nameserver to
resolve VM domain names from domain 0, when domain option is used.
Signed-off-by: Diego Woitasen <diego.woitasen@vhgroup.net>
Signed-off-by: Eric Blake <eblake@redhat.com>
Re-arrange the code so that the returned bitmap is always initialized to
NULL even on early failures and return an error message as some callers
are already expecting it. Fix up the rest not to shadow the error.
This resolves the issue that prompted the filing of
https://bugzilla.redhat.com/show_bug.cgi?id=928638
(although the request there is for something much larger and more
general than this patch).
commit f3868259ca disabled the
forwarding to upstream DNS servers of unresolved DNS requests for
names that had no domain, but were just simple host names (no "."
character anywhere in the name). While this behavior is frowned upon
by DNS root servers (that's why it was changed in libvirt), it is
convenient in some cases, and since dnsmasq can be configured to allow
it, it must not be strictly forbidden.
This patch restores the old behavior, but since it is usually
undesirable, restoring it requires specification of a new option in
the network config. Adding the attribute "forwardPlainNames='yes'" to
the <dns> elemnt does the trick - when that attribute is added to a
network config, any simple hostnames that can't be resolved by the
network's dnsmasq instance will be forwarded to the DNS servers listed
in the host's /etc/resolv.conf for an attempt at resolution (just as
any FQDN would be forwarded).
When that attribute *isn't* specified, unresolved simple names will
*not* be forwarded to the upstream DNS server - this is the default
behavior.
Before, missing attributes were only OK when adding entries;
modification and deletion required all of them.
Now, only deletion works with missing attributes, as long as
the host is uniquely identified.
Decrementing it when it was already 0 causes an invalid free
in virNetworkDefUpdateDNSHost if virNetworkDNSHostDefParseXML
fails and virNetworkDNSHostDefClear gets called twice.
virNetworkForwardDefClear left the number untouched even if it
freed all the elements.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
network: static route support for <network>
This patch adds the <route> subelement of <network> to define a static
route. the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".
These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:
ip route add <address>/<prefix> via <gateway> \
dev <virbr-bridge> proto static metric <metric>
Tests are done to validate that the input data are correct. For
example, for a static route ip definition, the address must be a
network address and not a host address. Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).
prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.
Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:
RTNETLINK answers: File exists
This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future). Caution should be
used when manipulating route metrics, especially for a default route.
Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better. But,
that is being left as an exercise for another day.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
I remembered to document this bit, but somehow forgot to implement it.
This adds <driver name='kvm|vfio'/> as a subelement to the <forward>
element of a network (this puts it parallel to the match between
mode='hostdev' attribute in a network and type='hostdev' in an
<interface>).
Since it's already documented, only the parser, formatter, backend
driver recognition (it just translates/moves the flag into the
<interface> at the appropriate time), and a test case were needed.
(I used a separate enum for the values both because the original is
defined in domain_conf.h, which is unavailable from network_conf.h,
and because in the future it's possible that we may want to support
other non-hostdev oriented driver names in the network parser; this
makes sure that one can be expanded without the other).
1. Handle invalid ULong prefix specified.
When parsing for @prefix as a ULong, a -2 can be returned
if the specification is not a valid ULong.
2. Error out if address= is not specified.
3. Merge netmask process/tests under family tests.
4. Max sure that prefix does not exceed maximum.
.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Create the utility function virSocketAddrGetIpPrefix() to
determine the prefix for this network. The code in this
function was adapted from virNetworkIpDefPrefix().
Update virNetworkIpDefPrefix() in src/conf/network_conf.c
to use the new utility function.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Until now tranisent networks weren't really useful as libvirtd wasn't
able to remember them across restarts. This patch adds support for
loading status files of transient networks (that already were generated)
so that the status isn't lost.
This patch chops up virNetworkObjUpdateParseFile and turns it into
virNetworkLoadState and a few friends that will help us to load status
XMLs and refactors the functions that are loading the configs to use
them.
==5306== 8 bytes in 1 blocks are definitely lost in loss record 24 of 277
==5306== at 0x4C28B2F: calloc (vg_replace_malloc.c:593)
==5306== by 0x5293CAF: virAllocN (viralloc.c:152)
==5306== by 0x52DFEAE: virXPathNodeSet (virxml.c:611)
==5306== by 0x5313DD9: virNetworkDefParseXML (network_conf.c:1408)
==5306== by 0x53170F6: virNetworkObjUpdateParseFile (network_conf.c:2031)
==5306== by 0x131DA63C: networkStartup (bridge_driver.c:279)
==5306== by 0x53481DF: virStateInitialize (libvirt.c:822)
==5306== by 0x40DF44: daemonRunStateInit (libvirtd.c:877)
==5306== by 0x52D2FF5: virThreadHelper (virthreadpthread.c:161)
==5306== by 0x5D00C52: start_thread (in /usr/lib64/libpthread-2.17.so)
==5306== by 0x6410ECC: clone (in /usr/lib64/libc-2.17.so)
When libvirtd loads active network configs from network state directory,
it should release the class_id memory block which was allocated
at the time of loading xml from network config directory.
virBitmapParse will create a new memory block of bitmap class_id which
causes a memory leak.
This happens when at least one virtual network is active before.
==12234== 8,216 (24 direct, 8,192 indirect) bytes in 1 blocks are definitely \
lost in loss record 702 of 709
==12234== at 0x4A06B2F: calloc (vg_replace_malloc.c:593)
==12234== by 0x37AB04D77D: virAlloc (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB04EF89: virBitmapNew (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFB37: virNetworkAssignDef (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFD31: ??? (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x37AB0BFE92: virNetworkLoadAllConfigs (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x10650E5A: ??? (in /usr/lib64/libvirt/connection-driver/libvirt_driver_network.so)
==12234== by 0x37AB0EB72F: virStateInitialize (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x40DE04: ??? (in /usr/sbin/libvirtd)
==12234== by 0x37AB0832E8: ??? (in /usr/lib64/libvirt.so.0.1000.3)
==12234== by 0x3796807D14: start_thread (in /usr/lib64/libpthread-2.16.so)
==12234== by 0x37960F246C: clone (in /usr/lib64/libc-2.16.so)
This reverts commit 383ebc4694.
We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address. Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used. According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.
Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.
Documentation and schemas have been updated.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.
Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.
Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
We pass over the address/port start/end values many times so we put
them in structs.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Laine Stump <laine@laine.org>
