'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up remaining offenders in src/conf, and their fallout.
* src/conf/snapshot_conf.h (virDomainSnapshotAssignDef)
(virDomainSnapshotFindByName): Drop attempt at const.
* src/conf/interface_conf.h (virInterfaceObjIsActive)
(virInterfaceDefFormat): Use intended type.
(virInterfaceFindByMACString, virInterfaceFindByName)
(virInterfaceAssignDef, virInterfaceRemove): Drop attempt at
const.
* src/conf/network_conf.h (virNetworkObjIsActive)
(virNetworkDefFormat, virNetworkDefForwardIf)
(virNetworkDefGetIpByIndex, virNetworkIpDefPrefix)
(virNetworkIpDefNetmask): Use intended type.
(virNetworkFindByUUID, virNetworkFindByName, virNetworkAssignDef)
(virNetworkObjAssignDef, virNetworkRemoveInactive)
(virNetworkBridgeInUse, virNetworkSetBridgeName)
(virNetworkAllocateBridge): Drop attempt at const.
* src/conf/netdev_vlan_conf.h (virNetDevVlanFormat): Make
const-correct.
* src/conf/node_device_conf.h (virNodeDeviceHasCap)
(virNodeDeviceDefFormat): Use intended type.
(virNodeDeviceFindByName, virNodeDeviceFindBySysfsPath)
(virNodeDeviceAssignDef, virNodeDeviceObjRemove)
(virNodeDeviceGetParentHost): Drop attempt at const.
* src/conf/secret_conf.h (virSecretDefFormat): Use intended type.
* src/conf/snapshot_conf.c (virDomainSnapshotAssignDef)
(virDomainSnapshotFindByName): Fix fallout.
* src/conf/interface_conf.c (virInterfaceBridgeDefFormat)
(virInterfaceBondDefFormat, virInterfaceVlanDefFormat)
(virInterfaceProtocolDefFormat, virInterfaceDefDevFormat)
(virInterfaceDefFormat, virInterfaceFindByMACString)
(virInterfaceFindByName, virInterfaceAssignDef)
(virInterfaceRemove): Likewise.
* src/conf/network_conf.c
(VIR_ENUM_IMPL, virNetworkFindByName, virNetworkObjAssignDef)
(virNetworkAssignDef, virNetworkRemoveInactive)
(virNetworkDefGetIpByIndex, virNetworkIpDefPrefix)
(virNetworkIpDefNetmask, virNetworkDHCPHostDefParseXML)
(virNetworkIpDefFormat, virNetworkRouteDefFormat)
(virPortGroupDefFormat, virNetworkForwardNatDefFormat)
(virNetworkDefFormatInternal, virNetworkBridgeInUse)
(virNetworkAllocateBridge, virNetworkSetBridgeName)
(virNetworkDNSDefFormat, virNetworkDefFormat): Likewise.
* src/conf/netdev_vlan_conf.c (virNetDevVlanFormat): Likewise.
* src/conf/node_device_conf.c (virNodeDeviceHasCap)
(virNodeDeviceFindBySysfsPath, virNodeDeviceFindByName)
(virNodeDeviceAssignDef, virNodeDeviceObjRemove)
(virNodeDeviceDefFormat, virNodeDeviceGetParentHost): Likewise.
* src/conf/secret_conf.c (virSecretDefFormatUsage)
(virSecretDefFormat): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit '861d4056' introduced the following:
TEST: networkxml2xmltest
.................. 18 OK
==25504== 7 bytes in 1 blocks are definitely lost in loss record 5 of 23
==25504== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==25504== by 0x37C1085D71: strdup (strdup.c:42)
==25504== by 0x4CB835F: virStrdup (virstring.c:546)
==25504== by 0x4CC5179: virXPathString (virxml.c:90)
==25504== by 0x4CC75C2: virNetDevVlanParse (netdev_vlan_conf.c:78)
==25504== by 0x4CF928A: virNetworkPortGroupParseXML (network_conf.c:1555)
==25504== by 0x4CFE385: virNetworkDefParseXML (network_conf.c:2049)
==25504== by 0x4D0113B: virNetworkDefParseNode (network_conf.c:2273)
==25504== by 0x4D01254: virNetworkDefParse (network_conf.c:2234)
==25504== by 0x401E80: testCompareXMLToXMLHelper (networkxml2xmltest.c:32)
==25504== by 0x402D4F: virtTestRun (testutils.c:158)
==25504== by 0x401CE9: mymain (networkxml2xmltest.c:110)
==25504==
PASS: networkxml2xmltest
Also changed the label from error to cleanup and adjusted code since it's
all one exit path
This patch adds functionality to allow libvirt to configure the
'native-tagged' and 'native-untagged' modes on openvswitch networks.
Signed-off-by: Laine Stump <laine@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The following config elements now support a <vlan> subelements:
within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>
Each vlan element must have one or more <tag id='n'/> subelements. If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.
Some examples:
<interface type='hostdev'/>
<vlan>
<tag id='42'/>
</vlan>
<mac address='52:54:00:12:34:56'/>
...
</interface>
<network>
<name>vlan-net</name>
<vlan trunk='yes'>
<tag id='30'/>
</vlan>
<virtualport type='openvswitch'/>
</network>
<interface type='network'/>
<source network='vlan-net'/>
...
</interface>
<network>
<name>trunk-vlan</name>
<vlan>
<tag id='42'/>
<tag id='43'/>
</vlan>
...
</network>
<network>
<name>multi</name>
...
<portgroup name='production'/>
<vlan>
<tag id='42'/>
</vlan>
</portgroup>
<portgroup name='test'/>
<vlan>
<tag id='666'/>
</vlan>
</portgroup>
</network>
<interface type='network'/>
<source network='multi' portgroup='test'/>
...
</interface>
IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
