The gotShutdown bool has been redundant since we started setting
VIR_DOMAIN_SHUTDOWN state after receiving SHUTDOWN event from QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If gotShutdown is true, the domain state cannot be running because of
the following code in qemuProcessHandleShutdown:
priv->gotShutdown = true;
VIR_DEBUG("Transitioned guest %s to shutdown state",
vm->def->name);
virDomainObjSetState(vm,
VIR_DOMAIN_SHUTDOWN,
VIR_DOMAIN_SHUTDOWN_UNKNOWN);
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
On aarch64, lauch vm with the follow configuration:
<interface type="hostdev" managed="yes">
<mac address="fa:16:3e:14:41:00"/>
<source>
<address type="pci" domain="0x0000" bus="0x01" slot="0x0b" function="0x2"/>
</source>
</interface>
libvirtd will crash when accessing net->model.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If qemuDomainSnapshotDiscard() fails for any reason (rare,
but possible with an ill-timed ENOMEM or if
qemuDomainSnapshotForEachQcow2() has problems talking to the
qemu guest monitor), then an attempt to retry the snapshot
deletion API will crash because we didn't undo the effects
of virDomainSnapshotDropParent() temporarily rearranging the
internal list structures, and the second attempt to drop
parents will dereference NULL. Fix it by instead noting that
there are only two callers to qemuDomainSnapshotDiscard(),
and only one of the two callers wants the parent to be updated;
thus we can move the call to virDomainSnapshotDropParent()
into a code path that only gets executed on success.
Signed-off-by: Eric Blake <eblake@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit v4.7.0-302-ge6d77a75c4 processing RESUME event is mandatory
for updating domain state. But the event handler explicitly ignored this
event in some cases. Thus the state would be wrong after a fake reboot
or when a domain was rebooted after it crashed.
BTW, the code to ignore RESUME event after SHUTDOWN didn't make sense
even before making RESUME event mandatory. Most likely it was there as a
result of careless copy&paste from qemuProcessHandleStop.
The corresponding debug message was clarified since the original state
does not have to be "paused" only and while we have a "resumed" event,
the state is called "running".
https://bugzilla.redhat.com/show_bug.cgi?id=1612943
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The array "mount" inside lxc_container is not being checked before for
loop. Clang syntax scan is complaining about this segmentation fault.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The current qemuProcessReconnect logic paints a broad brush
determining that the shutdown reason must be crashed if it was
determined that the domain was started with -no-shutdown; however,
there's many other ways to get to the error label, so let's narrow
our reasoning window for using VIR_DOMAIN_SHUTOFF_CRASHED to the
period where we essentially know we've tried to create to the
monitor and before we were successful in opening the connection.
Failures that occur outside that window would thus be considered
as VIR_DOMAIN_SHUTOFF_UNKNOWN, at least for now.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
When qemuProcessReconnectHelper was introduced (commit d38897a5d)
reconnection failure used VIR_DOMAIN_SHUTOFF_FAILED; however, that
was changed in commit bda2f17d to either VIR_DOMAIN_SHUTOFF_CRASHED
or VIR_DOMAIN_SHUTOFF_UNKNOWN.
When QEMU_CAPS_NO_SHUTDOWN checking was removed in commit fe35b1ad6
the conditional state was just left at VIR_DOMAIN_SHUTOFF_CRASHED.
So introduce qemuDomainIsUsingNoShutdown which will manage the
condition when the domain was started with -no-shutdown so that
when/if reconnection failure occurs we can restore the decision
point used to determine whether CRASHED or UNKNOWN is provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
V2 of the libxl soft reset patch, which was pushed as commit da4b0fd9,
dropped the hunk that disposed of the libxl_domain_config object. Add
the missing hunk to properly dispose the object.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The pvops Linux kernel implements machine_ops.crash_shutdown as
static void xen_hvm_crash_shutdown(struct pt_regs *regs)
{
native_machine_crash_shutdown(regs);
xen_reboot(SHUTDOWN_soft_reset);
}
but currently the libxl driver does not handle the soft reset
shutdown event. As a result, the guest domain never proceeds
past xen_reboot(), making it impossible for HVM domains to save
a crash dump using kexec.
This patch adds support for handling the soft reset event by
calling libxl_domain_soft_reset() and re-enabling domain death
events, which is similar to the xl tool handling of soft reset
shutdown event.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
There are too many goto labels in libxlDomainShutdownThread. Convert the
'destroy' and 'restart' labels to helper functions, leaving only the
commonly used pattern of 'endjob' and 'cleanup' labels.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
In libxlDomainShutdownThread, virObjectEventStateQueue is needlessly
called in the destroy and restart labels. The cleanup label aready
queues whatever event was created based on libxl_shutdown_reason.
There is no need to handle destroy and restart differently.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Our HACKING guide forbids these.
There's no point in exempting these from the spacing check
if their existence is against our coding style.
Note that the non-usage of these comments itself is not enforced
by syntax check, probably because of the need to implement a C parser.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1631606
Changes made to manage and utilize a secondary connection
driver to APIs outside the scope of the primary connection
driver have resulted in some confusion processing polkit rules
since the simple "access denied" error message doesn't provide
enough of a clue when combined with the "authentication failed:
access denied by policy" as to which connection driver refused
or failed the ACL check.
In order to provide some context, let's modify the existing
"access denied" error returne from the various vir*EnsureACL
API's to provide the connection driver name that is causing
the failure. This should provide the context for writing the
polkit rules that would allow access via the driver.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 57f5621f modified nwfilterInstantiateFilter to detect when
a filter binding was already present before attempting to add the
new binding and instantiate it. Additionally, the change to
nwfilterStateInitialize to call virNWFilterBindingObjListLoadAllConfigs
(from commit c21679fa3f) to load active domain filter bindings, but
not instantiate them eventually leads to a problem for the QEMU
driver reconnection logic after a daemon restart where the filter
bindings would no longer be instantiated.
Subsequent commit f14c37ce4c replaced the nwfilterInstantiateFilter
with virDomainConfNWFilterInstantiate which uses @ignoreExists to
detect presence of the filter and still did not restore the filter
instantiation call when making the new nwfilter bindings logic active.
Thus in order to instantiate any active domain filter, we will call
virNWFilterBuildAll with 'false' to indicate the need to go through
all the active bindings calling virNWFilterInstantiateFilter to
instantiate the filter bindings.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit cdbe1332 neglected to document the API. So let's add some
details about the algorithm and why it was used to help future
readers understand the issues encountered.
NB: Management of the processing udev device notification is a
delicate balance between the udev process, the scheduler, and when
exactly the data from/for the socket is received. The balance is
particularly important for environments when multiple devices are
added into the system more or less simultaneously such as is done
for mdev or SRIOV. In these cases old libudev blocking on the udev
recv() occurs more frequently. It's expected that future devices
will follow similar algorithms. Even though the algorithm does
present some challenges for older OS's (such as Centos 6), trying
to rewrite the algorithm to fit both models would be more complex
and involve pulling the monitor object out of the private data
lockable object and would need to be guarded by a separate lock.
Devising such an algorithm to work around issues with older OS's
at the expense of more modern OS algorithms in newer event processing
code may result in unexpected issues, so the choice is to encourage
use of newer OS's with newer udev event processing code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1524230
The qemuBuildVhostuserCommandLine builds command line for
vhostuser type interfaces. It is duplicating some code of the
function it is called from (qemuBuildInterfaceCommandLine)
because of the way it's called. If we merge it into the caller
not only we save a few lines but we also enable checks that we
would have to duplicate otherwise (e.g. QoS availability).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we have variables A, B, C then there are two ways to free
them. Either in the order they are declared or the reversed one.
Any other ordering is confusing. In this commit I'm reordering
calls to VIR_FREE in the reversed order.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The result of libssh2_userauth_password is being assigned to 'ret' in
one branch and 'rc' in the other branch. Checks are all done against the
'ret' variable, so one branch never does the correct check.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Adjusting domain format documentation, adding device address
support and adding command line generation for vfio-ap.
Since only one mediated hostdev with model vfio-ap is supported a check
disallows to define domains with more than one such hostdev device.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
Introduce vfio-ap capability.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
IOThread pids info will lost after libvirtd restart, then
if we call pinIOThread, sched_setaffinity will be called with
pid 0, not IOThread pid. So pinIOThread cannot work normally.
Signed-off-by: Jie Wang <wangjie88.huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
virXMLFormatElement() frees attrBuf on success, but not necessarily
on failure. Most other callers of this function take the time to
reset attrBuf afterwords, but qemuDomainObjPrivateXMLFormatBlockjobs()
was relying on it succeeding, and could thus result in a memory leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1640465
Weirdly enough, there can be symlinks in the path we are trying
to fix. If it is the case our clever algorithm that finds matches
against mount table won't work. Canonicalize path at the
beginning then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virFileInData() function should return to the caller if the
current position the passed file is in is a data section or a
hole (and also how long the current section is). At any rate,
upon return from this function (be it successful or not) the
original position in the file is restored. This may mess up with
errno which might have been set earlier. Save the errno into a
local variable so it can be restored for the caller's sake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The QEMU @cfg config variable is unused in context of qemuProcessInit,
let's drop it.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If the learning thread is configured to learn on all ethernet frames
(which is hardcoded) then chances are high that there is a packet on
every iteration of inspecting frames loop. As result we will hang on
shutdown because we don't check threadsTerminate if there is packet.
Let's just check termination conditions on every iteration. Since
we'll check each iteration, the check after pcap_next essentially
is unnecessary since on failure we'd loop back to the top and timeout
and then fail.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @alloc object returned by virDomainResctrlVcpuMatch is not
properly referenced and un-referenced in virDomainCachetuneDefParse.
This patch fixes this problem.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The URI parser used by libvirt does not populate uri->path if the
trailing slash is missing. The code virStorageSourceParseBackingURI
would then not populate src->path.
As only NBD network disks are allowed to have the 'name' field in the
XML defining the disk source omitted we'd generate an invalid XML which
we'd not parse again.
Fix it by populating src->path with an empty string if the uri is
lacking slash.
As pointed out above NBD is special in this case since we actually allow
it being NULL. The URI path is used as export name. Since an empty
export does not make sense the new approach clears the src->path if the
trailing slash is present but nothing else.
Add test cases now to cover all the various cases for NBD and non-NBD
uris as there was to time only 1 test abusing the quirk witout slash for
NBD and all other URIs contained the slash or in case of NBD also the
export name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The name is misleading. Change it to 'uristr' so that 'path' can be
reused in the proper context later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If the same source gets built twice ('build same source on different
hosts at different times') the resulting files may differ.
Fix this by sorting the hash keys before usage.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
There are couple of things wrong with the current implementation.
The first one is that in the first loop the code tries to build a
list of fuse.glusterfs mount points. Well, since the strings are
allocated in a temporary buffer and are not duplicated this
results in wrong decision made later in the code.
The second problem is that the code does not take into account
subtree mounts. For instance, if there's a fuse.gluster mounted
at /some/path and another FS mounted at /some/path/subdir the
code would not recognize this subdir mount.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If the given path is already a mount point (e.g. a bind mount of
a file, or simply a direct mount point of a FS), then our code
fails to detect that because the first thing it does is cutting
off part after last slash '/'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
On s390x the struct member f_type of statsfs is hard coded to 'unsigned
int'. Change virFileIsSharedFixFUSE() to take a 'long long int' and use
a temporary to avoid pointer-casting.
This fixes the following error:
../../src/util/virfile.c:3578:38: error: cast increases required alignment of target type [-Werror=cast-align]
virFileIsSharedFixFUSE(path, (long *) &sb.f_type);
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
virFileReadValueUint does not log errors for non-existient files,
it merely returns -2.
Commit 12093f1 introduced this.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
We now explicitly handle media change elsewhere so we can drop the
switch statement. This will also make it more intuitive once CDROM
device hotplug might be supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Disk hotplug has slightly different semantics from media changing. Move
the media change code out and add proper initialization of the new
source object and proper cleanups if something fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The disk hotplug code also overloads media change which is not ideal.
This will allow splitting out of the media change code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The disk storage source needs to be prepared if we want to use -blockdev
or secrets for the new media image. It does not hurt to do the same for
the legacy hotplug code as well.
Unfortunately helpers like qemuDomainPrepareDiskSource take
virDomainDiskDef as an argument and it would be hard to fix them to take
an explicit source, so the function also temporarily replaces disk->src
for the new source in this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Some functions require us to replace disk->src with the new source for
them to work properly. To avoid confusion all places which allow
explicit virStorageSource should get the appropriate definition.
The legacy code fortunately does not need anything from the old source
so that does not require modifications.
Blockdev does require the old definition so we'll pass it explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the code is also used when changing media we need to allow
specifying explicit source for which we are going to prepare. With this
change callers don't have to replace disk->src with the new source
definition for generating these.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
qemu media changing code tried to assume old media's format for the new
one if that was not specified. Since the format will always be present
it does not make sense to keep the code around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Old media changing code does not bother setting up the secrets for new
media or actually removing/adding of the corresponding objects.
Additionally it uses secrets setup for the old image to be removed as
the secret for the new image which is wrong.
Remove the support for secrets while changing media for the legacy
approach. The only reasonable way to fix it is when using blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
While the idea was good the implementation not so much as we need to
take into account the old disk data and the new source. The code will be
consolidated later in a different way.
This reverts commit 663b1d55de.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Preparing the storage source prior to assigning the alias will not work
as the names of the certain objects depend on the alias for the legacy
hotplug case as we generate the object names for the secrets based on
the alias.
This reverts commit 192fdaa614.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This enables to use both cgroup v1 and v2 at the same time together
with libvirt. It is supported by kernel and there is valid use-case,
not all controllers are implemented in cgroup v2 so there might be
configurations where administrator would enable these missing
controllers in cgroup v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In order to set CPU cfs period using cgroup v2 'cpu.max' interface
we need to load the current value of CPU cfs quota first because
format of 'cpu.max' interface is '$quota $period' and in order to
change 'period' we need to write 'quota' as well. Writing only one
number changes only 'quota'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroups v2 we need to handle threads and processes differently.
If you need to move a process you need to write its pid into
cgrou.procs file and it will move the process with all its threads
as well. The whole process will be moved if you use tid of any thread.
In order to move only threads at first we need to create threaded group
and after that we can write the relevant thread tids into cgroup.threads
file. Threads can be moved only into cgroups that are children of
cgroup of its process.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When creating cgroup hierarchy we need to enable controllers in the
parent cgroup in order to be usable. That means writing "+{controller}"
into cgroup.subtree_control file. We can enable only controllers that
are enabled for parent cgroup, that means we need to do that for the
whole cgroup tree.
Cgroups for threads needs to be handled differently in cgroup v2. There
are two types of controllers:
- domain controllers: these cannot be enabled for threads
- threaded controllers: these can be enabled for threads
In addition there are multiple types of cgroups:
- domain: normal cgroup
- domain threaded: a domain cgroup that serves as root for threaded
cgroups
- domain invalid: invalid cgroup, can be changed into threaded, this
is the default state if you create subgroup inside
domain threaded group or threaded group
- threaded: threaded cgroup which can have domain threaded or
threaded as parent group
In order to create threaded cgroup it's sufficient to write "threaded"
into cgroup.type file, it will automatically make parent cgroup
"domain threaded" if it was only "domain". In case the parent cgroup
is already "domain threaded" or "threaded" it will modify only the type
of current cgroup. After that we can enable threaded controllers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Cgroup v2 has only single mount point for all controllers. The list
of controllers is stored in cgroup.controllers file, name of controllers
are separated by space.
In cgroup v2 there is no cpuacct controller, the cpu.stat file always
exists with usage stats.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If the placement was copied from parent or set to absolute path
there is nothing to do, otherwise set the placement based on
process placement from /proc/self/cgroup or /proc/{pid}/cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When reconnecting to a domain we are validating the cgroup name.
In case of cgroup v2 we need to validate only the new format for host
without systemd '{machinename}.libvirt-{drivername}' or scope name
generated by systemd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We cannot detect only mount points to figure out whether cgroup v2
is available because systemd uses cgroup v2 for process tracking and
all controllers are mounted as cgroup v1 controllers.
To make sure that this is no the situation we need to check
'cgroup.controllers' file if it's not empty to make sure that cgroup
v2 is not mounted only for process tracking.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Place cgroup v2 backend type before cgroup v1 to make it obvious
that cgroup v2 is preferred implementation.
Following patches will introduce support for hybrid configuration
which will allow us to use both at the same time, but we should
prefer cgroup v2 regardless.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
My commit d6b8838 fixed the uid:gid for the pre-created UNIX sockets
but did not account for the different umask of libvirtd and QEMU.
Since commit 0e1a1a8c we set umask to '0002' for the QEMU process.
Manually tune-up the permissions to match what we would have gotten
if QEMU had created the socket.
https://bugzilla.redhat.com/show_bug.cgi?id=1633389
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632711
GlusterFS is typically safe when it comes to migration. It's a
network FS after all. However, it can be mounted via FUSE driver
they provide. If that is the case we fail to identify it and
think migration is not safe and require VIR_MIGRATE_UNSAFE flag.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
