Add bhyve support to virt-host-validate(1). It checks for the
essential kernel modules to be available so that user can actually
start VMs, have networking and console access.
It uses the kldnext(2)/kldstat(2) routines to retrieve modules list.
As bhyve is only available on FreeBSD and these routines were available
long before bhyve appeared, not adding any specific configure checks
for that.
Also, update tools/Makefile.am to add
virt-host-validate-$driver.[hc] to the build only if the
appropriate driver is enabled.
Add a new test to fchosttest in order to test creation of our vHBA
via the Storage Pool logic. Unlike the real code, we cannot yet use
the virVHBA* API's because they (currently) traverse the file system
in order to get the parent vport capable scsi_host. Besides there's
no "real" NPIV device here - so we have to take some liberties, at
least for now.
Instead, we'll follow the node device tests partially in order to
create and destroy the vHBA with the test node devices.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1430634
If a qemu process has died, we get EOF on its monitor. At this
point, since qemu process was the only one running in the
namespace kernel has already cleaned the namespace up. Any
attempt of ours to enter it has to fail.
This really happened in the bug linked above. We've tried to
attach a disk to qemu and while we were in the monitor talking to
qemu it just died. Therefore our code tried to do some roll back
(e.g. deny the device in cgroups again, restore labels, etc.).
However, during the roll back (esp. when restoring labels) we
still thought that domain has a namespace. So we used secdriver's
transactions. This failed as there is no namespace to enter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This documents the preferred conventions for naming files,
structs, enums, typedefs and functions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a very historic artefact. Back in the old days of
830ba76c3e when we had macros to add arguments onto qemu command
line (!) we thought it was a good idea to let qemu write out the
PID file. So we passed -pidfile $stateDir/$domName onto the
command line. Thus, in order for tests to work we needed stable
stateDir in the qemu driver. Unfortunately, after 16efa11aa6
where stateDir is mkdtemp()-d, this approach lead to a leak of
temp dir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the delivery of the DEVICE_DELETED event for the vCPU being deleted
would time out, the code would not call 'qemuDomainResetDeviceRemoval'.
Since the waiting thread did not unregister itself prior to stopping the
waiting the monitor code would try to wake it up instead of dispatching
it to the event worker. As a result the unplug process would not be
completed and the definition would not be updated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1428893https://bugzilla.redhat.com/show_bug.cgi?id=1427801
This reverts commit c96bd78e4e.
So our code is one big mess and we modify domain definition while
building qemu_command line and our hotplug code share only part
of the parsing and command line building code. Let's revert
that change because to fix it properly would require refactor and
move a lot of things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1430275
Even though scsi storage driver builds fine on non-Linux, it
will not work properly because it relies on Linux procfs, so
disable that in configure if we're not building for Linux.
We should skip <listen type='socket'/> only if the 'socket' path
is specified because if there is no 'socket' path we need to
keep that element in migratable XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1366088
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When libvirtd is started we call qemuDomainRecheckInternalPaths
to detect whether a domain has VNC socket path generated by libvirt
based on option from qemu.conf. However if we are parsing status XML
for running domain the existing socket path can be generated also if
the config XML uses the new <listen type='socket'/> element without
specifying any socket.
The current code doesn't make difference how the socket was generated
and always marks it as "fromConfig". We need to store the
"autoGenerated" value in the status XML in order to preserve that
information.
The difference between "fromConfig" and "autoGenerated" is important
for migration, because if the socket is based on "fromConfig" we don't
print it into the migratable XML and we assume that user has properly
configured qemu.conf on both hosts. However if the socket is based
on "autoGenerated" it means that a new feature was used and therefore
we need to leave the socket in migratable XML to make sure that if
this feature is not supported on destination the migration will fail.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Split apart and rename qemuDomainGetChardevTLSObjects in order to make a
more generic API that can create the TLS JSON prop objects (secret and
tls-creds-x509) to be used to create the objects
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create a qemuDomainAddChardevTLSObjects which will encapsulate the
qemuDomainGetChardevTLSObjects and qemuDomainAddTLSObjects so that
the callers don't need to worry about the props.
Move the dev->type and haveTLS checks in to the Add function to avoid
an unnecessary call to qemuDomainAddTLSObjects
Signed-off-by: John Ferlan <jferlan@redhat.com>
Refactor the TLS object adding code to make two separate API's that will
handle the add/remove of the "secret" and "tls-creds-x509" objects including
the Enter/Exit monitor commands.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since qemuDomainObjExitMonitor can also generate error messages,
let's move it inside any error message saving code on error paths
for various hotplug add activities.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Some of our tests (e.g. qemuhotplugtest) call
virDomainSaveConfig(). Now the problem is, qemuTestDriverInit()
creates a fake qemu driver and fills it with some fake
configuration. At least so we hoped. The truth is, it calls
regular virQEMUDriverConfigNew() and then fix couple of paths.
Literally. Therefore our tests see regular stateDir and configDir
for the user that is running the tests. Directories, where live
domain XMLs are stored. Let's just hope our test suite hasn't
mangled any of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1379200
When we are restoring a domain from a saved image, or just
updating its XML in the saved image - we have to make sure that
the ABI guests sees will not change. We have a function for that
which reports errors. But for some reason if this function fails,
we call it again with slightly different argument. Therefore it
might happen that we overwrite the original error and leave user
with less helpful one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf
Purely code motion at this point, plus adjustments to cleanly build.
Found by Coverity. Because there's an "if ((cur = strstr(base, "revision"))
!= NULL) {" followed by a "base = cur" coverity notes that 'base' could
then be NULL causing the return to the top of the "while ((tmp_base =
strstr(base, "processor")) != NULL) {" to have strstr deref a NULL 'base'
pointer because the setting of base at the bottom of the loop is unconditional.
Alter the code to set "base = cur" after processing each key. That will
"ensure" that base doesn't get set to NULL if both "cpu" and "revision"
do no follow a "processor".
While a /proc/cpuinfo file that has a "processor" key but with neither
a "cpu" nor a "revision" doesn't seem feasible, the code is written as if
it could happen, so we have to account for it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Calls to virFileReadAll after a VIR_ALLOC that return NULL all show
a memory leak since 'ret' isn't virSysinfoDefFree'd and normal path
"return ret" doesn't free outbuf.
Reported by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
$ virsh vol-clone /tmp/test.iso new.iso
error: Failed to clone vol from test.iso
error: internal error: Child process (/bin/qemu-img convert -f iso -O iso /tmp/test.iso /tmp/new.iso) unexpected exit status 1: qemu-img: Could not open '/tmp/test.iso': Unknown driver 'iso'
Map iso->raw before sending the format value to qemu-img
https://bugzilla.redhat.com/show_bug.cgi?id=972784https://bugzilla.redhat.com/show_bug.cgi?id=1419395
