Rather than using '-no-reboot' use the QMP command to update the
lifecycle action of 'on_reboot'.
This will be identical to how we set the behaviour during lifetime and
also avoids problems with use of the 'system-reset' QMP command during
bringup of the VM (used to update the firmware table of disks when disks
were hotplugged as part of startup).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The RESET event is delivered by qemu only when the guest OS is actually
allowed to reboot ('-no-reboot' or equivalent is not used) and due to
the nature of async handling of the events VM is actually already
executing guest code after the reboot, until our code gets to killing
it.
In general it should have been impossible to reach a state where the
reboot action is 'destroy' but we didn't use '-no-reboot' but due to
various bugs it was.
Due to the fact that this was not a desired operation and additionally
guest code already is executing I think the best option is not to kill
the VM any more (possible data loss?) and rely for the proper fix where
we use the new 'set-action' QMP command to enable an equivalent
behaviour to '-no-reboot' during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Directly use 'priv->allowReboot' as we now document what the behaiour is
to avoid another lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We simply terminate qemu instead of issuing a reset as the semantics of
the setting dictate.
Fix it by handling it identically to 'fake reboot'.
We need to forbid the combination of 'onReboot' -> 'destroy' and
'onPoweroff' -> reboot though as the handling would be hairy and it
honetly makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch also includes propagation of flags into the
virNetworkDefParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All supported QEMU versions have all the fields so we can remove the
booleans controlling which fields are used on the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it more obvious that we care about passing FDs on the commandline
before startup of qemu, which is used to avoid startup monitor polling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt assumes that a SCSI bus can fit up to 8 devices
(including controller itself), except for so called wide bus
which can accommodate up to 16 devices (again, including
controller). This plays important role when computing 'drive'
address in virDomainDiskDefAssignAddress(). So far, the only
driver that enables wide SCSI bus is VMX. But with newer
releases, ESX is capable of "super wide" bus (64 devices).
We can blindly bump the limit in our code because then we would
compute address that's invalid for older ESX versions that we
still want to support.
Unfortunately, I haven't found a better place where to store this
than virDomainDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'bootHotplug' can be auto-freed when terminating the function and moving
the declaration of 'vcpuprops' to the loop which uses it along with
automatic freeing allows us to simplify cleanup in certain cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a version of virPidFileForceCleanupPath that takes
a 'group' bool argument and propagate it all the way
down to virProcessKillPainfullyDelay.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The submission of the event to the helper thread has a verbose cleanup
path which was duplicated in all the event handlers. Simplify it by
extracting the code into a helper named 'qemuProcessEventSubmit' and
reuse it where appropriate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
The removed error messages are impossible as the enum values are
converted via VIR_ENUM helpers and guarded by compiler checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
It is also impossible for @info to be non-NULL in the cleanup section so
the cleanup can be completely removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adding virDomainSecDef for general launch security data
and moving virDomainSEVDef as an element for SEV data.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signaling the condition before vm->def->id is reset to -1 is dangerous:
in case a waiting thread wakes up, it does not see anything interesting
(the domain is still marked as running) and just enters virDomainObjWait
where it waits forever because the condition will never be signalled
again.
Originally it was impossible to get into such situation because the vm
object was locked all the time between signaling the condition and
resetting vm->def->id, but after commit 860a999802 released in 6.8.0,
qemuDomainObjStopWorker called in qemuProcessStop between
virDomainObjBroadcast and setting vm->def->id to -1 unlocks the vm
object giving other threads a chance to wake up and possibly hang.
In real world, this can be easily reproduced by killing, destroying, or
just shutting down (from the guest OS) a domain while it is being
migrated somewhere else. The migration job would never finish.
So let's make sure we delay signaling the domain condition to the point
when a woken up thread can detect the domain is not active anymore.
https://bugzilla.redhat.com/show_bug.cgi?id=1949869
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the attempt to attach a device failed, we erased the
unattached device from the namespace. This resulted in erasing an
already attached device in case of a duplicate. We need to check
for existing file in the namespace in order to determine erasing
it in case of a failure.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1780508
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remember whether the user passed an explicit index when registering the
event so that we can avoid the top level event when it isn't needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When qos is set or delete, we have to check if the port is an ovs managed
port. If true, call the virNetDevOpenvswitchInterfaceSetQos function when qos
is set, and call the virNetDevOpenvswitchInterfaceClearQos function when
the interface is to be destroyed.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The NVRAM label is set in qemuSecuritySetAllLabel(). There's no
need to set its label upfront. In fact, setting it twice creates
an imbalance because it's unset only once which mangles seclabel
remembering. However, plain removal of the
qemuSecurityDomainSetPathLabel() undoes the fix for the original
bug (when dynamic ownership is off then the NVRAM is not created
with cfg->user and cfg->group but as root:root). Therefore, we
have to switch to virFileOpenAs() and pass cfg->user and
cfg->group and VIR_FILE_OPEN_FORCE_OWNER flag. There's no need to
pass VIR_FILE_OPEN_FORCE_MODE because the file will be created
with the proper mode.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1969347
Fixes: bcdaa91a27b5b2d103535270a6a287efe6cd8bfb
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
