These two attributes are supported for vhost-user-blk as well.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Asynchronous teardown can be specified if the QEMU binary supports it by
adding in the domain XML
<features>
...
<async-teardown enabled='yes|no'/>
...
</features>
By default this new feature is disabled.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In our passt example XML we use /var/log/passt.log as path to the
log file. This is not optimal, because in case of unprivileged
daemon, neither libvirt nor passt has enough permissions to
create the file. Let's move the file under /tmp.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both virtio-mem and virtio-pmem devices have '.memaddr' attribute
which controls the address where they are mapped in the guest
memory. Ideally, users do not need to specify this as QEMU does
the right thing and computes addresses automatically on startup.
But soon, we will need to record this address as it is part of
guest ABI. And also, there might be some users that want to
control this value. Now, we are in a bit of a pickle, because
both these device types already have a PCI address, therefore we
can't just use <address/> blindly. But what we can do, is
introduce <address/> under the <target/> element. This is also
more conceptual, as knobs under <target/> control guest visible
config of memory device (and .memaddr surely falls into that
category).
NB, SgxEPCDeviceInfo struct in QMP definition also has .memaddr
attribute, but because of the way we build cmd line there's no
(easy) way to set the attribute. So ignore that for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The QEMU interface is still in a state of flux, and KVM support
has been pulled shortly after having been merged. Let's not
commit to a stable interface in libvirt just yet.
Reverts: 720e8f13ff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
The type='pty' attribute in the <serial> element causes a Pseudo TTY to be
allocated on the host side via "/dev/ptmx", which is meant to be
interacted with via "virsh console" or similar.
That's not how a firmware log is typically viewed or saved. Replace
type='pty' with type='file', and also provide an example <source> element
(with the pathname of the logfile), similarly to how the <serial> example
just above provides a <source> element too.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Andrea Bolognani <abologna@redhat.com>
Updates: 654968381d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <serial> opening tag is paired with the </console> closing tag; that's
a mismatch. The question is then whether to modify the former to
<console>, or the latter to </serial>.
Per section "Relationship between serial ports and consoles", <serial> is
used for emulated (not paravirt) consoles, and it's the type that's
suitable for early debug output (such as from firmware). Thus, change
</console> to </serial>.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Andrea Bolognani <abologna@redhat.com>
Fixes: 654968381d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Allow users controlling the multi-channel mode by adding a
'multichannel' property parsed for USB audio devices and wire up the
support in the qemu driver.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Emphasize the various sound card models and other config options by
using ``...``.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Indent the example XML block so that it belongs to the paragraph talking
about it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Somehow the example I neglected to fully update the example for the
interface passt backend when the design changed during
development. This fixes the example to reflect what is in the code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The limits are different with cgroups v1 and v2 but our XML
documentation and virsh manpage mentioned only cgroups v1 limits without
explicitly saying it only applies to cgroups v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This implements XML config to represent a subset of the features
supported by 'passt' (https://passt.top), which is an alternative
backend for emulated network devices that requires no elevated
privileges (similar to slirp, but "better").
Along with setting the backend to use passt (via <backend
type='passt'/> when the interface type='user'), we also support
passt's --log-file and --interface options (via the <backend>
subelement logFile and upstream attributes) and its --tcp-ports and
--udp-ports options (which selectively forward incoming connections to
the host on to the guest) via the new <portForward> subelement of
<interface>. Here is an example of the config for a network interface
that uses passt to connect:
<interface type='user'>
<mac address='52:54:00:a8:33:fc'/>
<ip address='192.168.221.122' family='ipv4'/>
<model type='virtio'/>
<backend type='passt' logFile='/tmp/xyzzy.log' upstream='eth0'/>
<portForward address='10.0.0.1' proto='tcp' dev='eth0'>
<range start='2022' to='22'/>
<range start='5000' end='5099' to='1000'/>
<range start='5010' end='5029' exclude='yes'/>
</portForward>
<portForward proto='udp'>
<range start='10101'/>
</portForward>
</interface>
In this case:
* the guest will be offered address 192.168.221.122 for its interface
via DHCP
* the passt process will write all log messages to /tmp/xyzzy.log
* routes to the outside for the guest will be derived from the
addresses and routes associated with the host interface "eth0".
* incoming tcp port 2022 to the host will be forwarded to port 22
on the guest.
* incoming tcp ports 5000-5099 (with the exception of ports 5010-5029)
to the host will be forwarded to port 1000-1099 on the guest.
* incoming udp packets on port 10101 will be forwarded (unchanged) to
the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemu-6.2 introduced support for the hv-avic enlightenment which allows
to use Hyper-V SynIC with hardware APICv/AVIC enabled.
Implement the libvirt support for it.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/402
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix some small typos and syntax errors in file formatdomain.rs.
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When commit bac6b266fb added this "functionality" this was the only
naming I could think of, but after discussion with Dan we found the name
'null' fits a bit better, so change it before we make a release with the
old name.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This represents an interface connected to a VMWare Distributed Switch,
previously obscured as a dummy interface.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch introduces the
<maxphysaddr mode='passthrough'/>
<maxphysaddr mode='emulate' bits='42'/>
sub element of /domain/cpu, which allows specifying the guest virtual CPU
address size. This can be useful if the guest needs to have a large amount
of memory.
If mode='passthrough', the virtual CPU will have the same number of address
bits as the host. If mode='emulate', the mandatory bits attribute specifies
the number of address bits.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Normally when an UEFI firmware is marked as read-only, an associated
NVRAM file will be created. Some builds of UEFI firmware, however, wish
to remain stateless and so will be read-only, but never have any NVRAM
file. To represent this concept a 'stateless' tristate bool attribute
is introduced on the <loader/> element.
There are rather a large number of permutations to consider.
With default firmware selection
* <os/>
=> Historic default, no change
* <os>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
With manual legacy BIOS selection
* <os>
<loader>/path/to/seabios</loader>
...
</os>
=> Historic default, no change
* <os>
<loader stateless='yes'>/path/to/seabios</loader>
...
</os>
=> Explicit version of historic default, no change
* <os>
<loader stateless='no'>/path/to/seabios</loader>
...
</os>
=> Invalid, bios is always stateless
With manual UEFI selection
* <os>
<loader type='pflash'>/path/to/edk2</loader>
...
</os>
=> Historic default, no change
* <os>
<loader type='pflash' stateless='yes'>/path/to/edk2</loader>
...
</os>
=> Skip auto-filling NVRAM / template
* <os>
<loader type='pflash' stateless='no'>/path/to/edk2</loader>
...
</os>
=> Explicit version of historic default, no change
With automatic firmware selection
* <os firmware='bios'/>
=> Historic default, no change
* <os firmware='bios'>
<loader stateless='yes'/>
</os>
=> Explicit version of historic default, no change
* <os firmware='bios'>
<loader stateless='no'/>
</os>
=> Invalid, bios is always stateless
* <os firmware='uefi'/>
=> Historic default, no change
* <os firmware='uefi'>
<loader stateless='yes'/>
</os>
=> Skip auto-filling NVRAM / template
* <os firmware='uefi'>
<loader stateless='no'/>
</os>
=> Explicit version of historic default, no change
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some USB devices have a buggy firmware that either crashes on
device reset, or make the device unusable in some other way.
Fortunately, QEMU offers a way to skip device reset either
completely, or if device is not initialized yet. Expose this
ability to users under:
<hostdev mode='subsystem' type='usb'>
<source guestReset='off'/>
</hostdev>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The commit v8.3.0-rc1~199 introduced <address/> to <iommu/>
device. And while it updated the RNG it forgot to update the
docs. Fix that.
Fixes: b0eb1e193f
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Document the format of the 'readahead' and 'timeout' XML elements more
accurately.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>