The test driver can share the same code with qemu driver when implement
testDomainGetIOThreadsConfig, so extract it for test driver to use.
Also add a new parameter `bitmap_size` to the function, it's used for
specifying the bitmap size of the bitmap to generate, it would be helpful
for test driver or some special situation.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test driver can share the same code with qemu driver when implement
testDomainAddIOThreadCheck and testDomainDelIOThreadCheck, so extract
them for test driver to use.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It always returns true. Make the logic a bit simpler to see through.
This completely removes 'virCryptoHaveCipher' as it's pointless in the
current form.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
LUN disks are supported only by VMX and QEMU drivers and the VMX
implementation is a subset of qemu's implementation, thus we can move
the qemu-specific validator to the global validation code providing that
we allow the format to be 'none' (qemu driver always sets 'raw' if it's
not set) and allow disk type 'volume' as a source (qemu always
translates the source, and VMX doesn't implement 'volume' at all).
Moving the code to the global validation allows us to stop calling it
from the qemu specific validation and also deduplicates the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Attaching a newly created vhostuser port to a VM fails due to an
apparmor denial
internal error: unable to execute QEMU command 'chardev-add': Failed
to bind socket to /run/openvswitch/vhu838c4d29-c9: Permission denied
In the case of a net device type VIR_DOMAIN_NET_TYPE_VHOSTUSER, the
underlying chardev is not labeled in qemuDomainAttachNetDevice prior
to calling qemuMonitorAttachCharDev.
A simple fix would be to call qemuSecuritySetChardevLabel using the
embedded virDomainChrSourceDef in the virDomainNetDef vhostuser data,
but this incurs the risk of incorrectly restoring the label. E.g.
consider the DAC driver behavior with a vhostuser net device, which
uses a socket for the chardev backend. The DAC driver uses XATTRS to
store original labelling information, but XATTRS are not compatible
with sockets. Without the original labelling information, the socket
labels will be restored with root ownership, preventing other
less-privileged processes from connecting to the socket.
This patch avoids overloading chardev labelling with vhostuser net
devices by introducing virSecurityManager{Set,Restore}NetdevLabel,
which is currently only implemented for the apparmor driver. The
new APIs are then used to set and restore labels for the vhostuser
net devices.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is just a small helper that will be used later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Separate virNetDevOpenvswitchInterfaceClearQos into two steps. When setting
qos, we can set only rx or tx and the other one should be cleared.
Signed-off-by: zhangjl02 <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For new feature Fibre Channel VMID we will need to get inode of the
VM root cgroup as it is used in the new kernel API together with VMID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
'virNetDevGetVirtualFunctions' calls 'virPCIGetVirtualFunctions' and
then re-iterates the returned list to fetch the interface names for the
returned virtual functions.
If we move the fetching of the interface name into
virPCIGetVirtualFunctions we can simplify the code and remove a bunch of
impossible error states.
To accomplish this the function is renamed to
'virPCIGetVirtualFunctionsFull' while keeping a wrapper with original
name and if the physical port ID is passed the interface name is fetched
too without the need to re-convert the address into a sysfs link.
For now 'virNetDevGetVirtualFunctions' still converts the returned data
into two lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a struct for holding the list of VFs returned by
virPCIGetVirtualFunctions so that we can employ automatic memory
clearing and also allow querying more information at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a generic function that you can provide your own predicate
function to search for a particular device. It will be used in an
upcoming commit.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new wrapper calls virInsertElementInternal with the appropriate
arguments without any checks which are unnecessary for appension. This
allows to have no return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a version of virPidFileForceCleanupPath that takes
a 'group' bool argument and propagate it all the way
down to virProcessKillPainfullyDelay.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test driver and qemu driver could share the same code in
virDomainGetMessages(), so extract it to a function.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add helper function virHostCPUGetHaltPollTime to obtain halt polling
time. If the kernel support halt polling time statistic, and mount
debugfs. This function will take effect on KVM VMs.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use function virFileReadValueUllongQuiet to read unsigned long
long value without error report.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for customizable grabToggle key combinations with
<input type='evdev'>.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce qos setting and cleaning method. Use ovs command to set qos
parameters on specific interface of qemu virtual machine.
When an ovs port is created, we add 'ifname' to external-ids. When setting
qos on an ovs port, query its qos and queue. If found, change qos on queried
queue and qos, otherwise create new queue and qos. When cleaning qos, query
and clean queues and qos in ovs table record by 'ifname' and 'vmid'.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tell whether a port definition is an ovs managed virtual port
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When seeing a guest with a sound device, and no audio backend, we
automatically add an audio backend XML element based on the historical
QEMU driver behaviour. Unfortunately when we live migrate back to an
old libvirt, it may not understand the audio driver type we configured.
We thus need to strip the default audio backend when migrating.
Fixes https://gitlab.com/libvirt/libvirt/-/issues/179
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is possible to define/edit(in shut off state) a domain XML with
same hostdev device repeated more than once, as shown below. This
behavior is not expected. So, this patch fixes it.
vser1:
<domain type='kvm'>
[...]
<devices>
[...]
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0005'/>
</hostdev>
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0006'/>
</hostdev>
[...]
</devices>
</domain>
$ virsh define vser1
Domain 'vser1' defined from vser1
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new version allows passing a virBuffer to format the string into.
This will be helpful in solving a memory lean in wrong usage of
virCommandToString and also in tests where we need to add a newline
after the command in certain cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Expose virNumaInterconnect XML formatter so that it can be
re-used by other parts of the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There's nothing domain specific about NUMA interconnects. Rename
the virDomainNumaInterconnect* structures and enums to
virNumaInterconnect*.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Expose virNumaCache XML formatter so that it can be re-used by
other parts of the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There's nothing domain specific about NUMA memory caches. Rename the
virDomainCache* structures and enums to virNumaCache*.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We supported autostart of node devices via an xml element, but this
is not consistent with other libvirt objects which use an explicit API
for setting autostart status. So revert this and implement it as an
official API in a future commit.
The initial support was refactored after merging, so this commit reverts
both of those previous commits.
Revert "virNodeDevCapMdevParseXML: Use virXMLPropEnum() for ./start/@type"
This reverts commit 9d4cd1d1cd.
Revert "nodedev: support auto-start property for mdevs"
This reverts commit 42a5585499.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainNetRemove() requires the index of the net device you want to
remove from the list, but in some cases you may not have the index
handy, only the object itself (or the object may not have been added
to the domain's list). virDomainNetRemoveByObj() first tries to find
the given object in the nets list, and deletes that if it is found.
As with virDomainNetRemove() it always unconditionally tries to remove
the device from the hostdevs list (in case it is the ridiculous
combined net+hostdev device created for <interface type='hostdev'>).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far, we have to places where we format <metadata/> into XMLs:
domain and network. Bot places share the same code. Move it into
a helper function and just call it from those places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Replace the last use of the function by virDomainDiskInsert and remove
the unused helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Expose virNumaDistance XML formatter so that it can be re-used by
other parts of the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This adds a new element to the mdev capabilities xml schema that
represents the start policy for a defined mediated device. The actual
auto-start functionality is handled behind the scenes by mdevctl, but it
wasn't yet hooked up in libvirt.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is essentially a way to determine if the current identity
is that of another libvirt daemon.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When talking to the secret driver, the callers inside libvirt daemons
need to be able to run with an elevated privileges that prove the API
calls are made by a libvirt daemon, not an end user application.
The virIdentityElevateCurrent method will take the current identity
and, if not already present, add the system token. The old current
identity is returned to the caller. With the VIR_IDENTITY_AUTORESTORE
annotation, the old current identity will be restored upon leaving
the codeblock scope.
... early work with regular privileges ...
if (something needing elevated privs) {
VIR_IDENTITY_AUTORESTORE virIdentity *oldident =
virIdentityElevateCurrent();
if (!oldident)
return -1;
... do something with elevated privileges ...
}
... later work with regular privileges ...
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When creating the system identity set the system token. The system
token is currently stored in a local path
/var/run/libvirt/common/system.token
Obviously with only traditional UNIX DAC in effect, this is largely
security through obscurity, if the client is running at the same
privilege level as the daemon. It does, however, reliably distinguish
an unprivileged client from the system daemons.
With a MAC system like SELinux though, or possible use of containers,
access can be further restricted.
A possible future improvement for Linux would be to populate the
kernel keyring with a secret for libvirt daemons to share.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want a way to distinguish between calls from a libvirt daemon, and a
regular client application when both are running as the same user
account. This is not possible with the current set of attributes
recorded against an identity, as there is nothing that is common to all
of the modular libvirt daemons, while distinct to all other processes.
We thus introduce the idea of a system token, which is simply a random
hex string that is only known by the libvirt daemons, to be recorded
against the system identity.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A random token is simply a string of random bytes formatted in
hexidecimal.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The helper is almost identical to virXMLPropEnum but it allows to pass a
default value to initialize the result to.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a helper which will format an XML element with attributes and
children, but compared to virXMLFormatElement it also formats an empty
element if both buffers are empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convenience function to return the value of an unsigned long long XML
attribute.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
