Make it obvious what's meant by 'overlay' and 'backing image' for sake
of extension of the document.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Until recently, an <interface type='network'> would automatically be
assigned model "rtl8139", which in turn would lead to the device being
assigned a PCI address on a conventional PCI controller (i.e. a
pcie-to-pci-bridge). If the network was a typical Linux host
bridge-based network that used an emulated device, this would be
appropriate, since the guest actually would get an emulated rtl8139
NIC, and that device is a conventional PCI device.
However, if the network being used was a pool of hostdev devices, the
guest would get an actual PCIe network device assigned from the host
via VFIO; while the interface model in that case is irrelevant for the
QEMU commandline to assign the device, the PCI address would have
already been assigned prior to runtime, so the address assignment
would be done based on the model='rtl8139' - a conventional PCI
device. VFIO assignment of a PCIe device to a conventional PCI slot
works, but we would rather have these devices in a PCIe slot.
Since commit bdb8f2e418, if <interface type='network'> points to a
etwork that is a pool of hostdev devices, the interface model will be
_unset_ by default. This patch uses that information when deciding
what type of slot to assign to the device: since all hostdev network
interfaces are SR-IOV VFs, and *all* SR-IOV network cards are PCIe, it
is safe to assume that the VFs are PCIe and we should assign then to a
PCIe slot in the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All the domain job related APIs were present in `qemu_domain.c`
along with the other domain APIs. In this patch, we move all the
qemu domain job APIs into a separate file.
Also, in this process, `qemuDomainTrackJob()`,
`qemuDomainFreeJob()`, `qemuDomainInitJob()` and
`qemuDomainObjSaveStatus()` were converted to a non-static
funciton and exposed using `qemu_domain.h`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In functions `qemuDomainObjInitJob`, `qemuDomainObjResetJob`,
`qemuDomainObjResetAgentJob`, `qemuDomainObjResetAsyncJob`,
`qemuDomainObjFreeJob`, `qemuDomainJobAllowed`,
`qemuDomainNestedJobAllowed` we avoid sending the complete
qemuDomainObjPrivatePtr as parameter and instead just send
qemuDomainJobObjPtr.
This is done in a effort to separating the qemu-job APIs into
a spearate file.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For some minimal OS like fedora cloud image, the make is not installed
by default.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some functions or code paths that may fail don't report error
(e.g. when acquiring PID file fails) leading to a silent quit
of the leaseshelper. This makes it super hard for us and users
to debug what is happening. Fortunately, dnsmasq captures both
stdout and stderr so we can write an error message there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
On a DHCP transaction, dnsmasq runs our leases helper which
updates corresponding JSON files. While one dnsmasq won't run the
leaseshelper in parallel, two dnsmasqs (from two distinct
networks) might. To avoid corrupting JSON file, the leaseshelper
acquires PID file first. Well, the way it's acquiring it is not
ideal - it calls virPidFileAcquirePath(wait = false); which
means, that either it acquires the PID file instantly or returns
an error and does not touch the JSON at all. This in turn means
that there might be a leases record missing. With wait = true,
this won't happen.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1840307
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The "virsh domcapabilities --arch ppc64" command will fail with no
error message set if qemu-system-ppc64 is not currently installed.
This is because virQEMUCapsCacheLookup() does not report any error
message if not capabilities can be obtained from the cache. Almost
all methods calling this expected an error to be set on failure.
Once that's fixed though, we see a further bug which is that
virQEMUCapsCacheLookupDefault() is passing a NULL binary path to
virQEMUCapsCacheLookup(), so we need to catch that too.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Move people who currently do not have commit access:
https://gitlab.com/libvirt/libvirt/-/project_members
to the 'previous maintainers' section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's possible to use ramfb as the boot display of an assigned vgpu
device. This was introduced in 4b95738c, but unfortunately the attribute
was not formatted into the xml output for such a device. This patch
fixes that oversight and adds a xml2xml test to verify proper behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1847791
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML format used for QEMU capabilities is not required to be
stable across releases, as we invalidate the cache whenever the
libvirt binary changes.
We none the less always try to parse te entire XML file before
we do any validity checks. Thus if we change the format of any
part of the data, or change permitted values for enums, then
libvirtd logs will be spammed with errors.
These are not in fact errors, but an expected scenario.
This change makes the loading code validate the cache timestamp
against the libvirtd timestamp immediately. If they don't match
then we stop loading the rest of the XML file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is easier for management software (and subsequently
distributions) to install hook script under
/etc/libvirt/hooks/$driver.d/ and have libvirt execute them in
alphabetical order. To maintain backwards compatibility,
/etc/libvirt/hooks/$driver hook script is executed the first
followed by scripts from the $driver.d directory.
The stdio is chained between the scripts. The output of the first
script is input of the second and so on.
Signed-off-by: Dmitry Nesterenko <dmitry.nesterenko@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This refactor is needed to support support hooks placed in
several files.
Signed-off-by: Dmitry Nesterenko <dmitry.nesterenko@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add tests for both supported scenarios: a single TPM Proxy and
a TPM Proxy with a regular TPM device in the same domain.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch wraps it up all the wiring done in previous patches,
enabling a PPC64 guest to launch a guest using a TPM Proxy
device.
Note that device validation is already being done in qemu_validate.c,
qemuValidateDomainDeviceDefTPM(), on domain define time. We don't
need to verify QEMU capabilities for this device again inside
qemu_command.c.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This tests aims to exercise how a TPM Proxy device can be
added in the domain, either alone or with a regular TPM
device. It also ensures that we do not allow bogus scenarios
to slip by.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Previous patch handled the conversion of def->tpm to the
array def->tpms and the XML parsing logic. This patch handles
the validations needed to ensure the intended behavior.
The existing qemuValidateDomainDeviceDefTPM() function was updated
to guarantee that the VIR_DOMAIN_TPM_MODEL_SPAPR_PROXY model is
exclusive to PPC64 guests and to the VIR_DOMAIN_TPM_TYPE_PASSTHROUGH
backend.
A new function called qemuDomainDefTPMsPostParse() was added to guarantee
that the following combinations in the same domain are valid:
- a single TPM device
- a single TPM Proxy device
- a single TPM + single TPM Proxy devices
And these combinations in the same domain are NOT valid:
- 2 or more TPM devices
- 2 or more TPM Proxy devices
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This trivial rework is aimed to reduce the amount of line changes
made by the next patch, when 'def->tpm' will become a 'def->tpms'
array.
Instead of using a 'switch' where only the VIR_DOMAIN_TPM_TYPE_EMULATOR
label does something, use an 'if' clause instead.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemuExtDevicesInitPaths() does not need 'ret'.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the TPM Proxy support for PPC64 guests by creating a new
cap called QEMU_CAPS_DEVICE_SPAPR_TPM_PROXY.
This device is part of the machinery the guest need to orchestrate
with the PPC64 Ultravisor the transition to the Secure VM (SVM)
mode. Inside QEMU, this device will be used with the H_TPM_COMM
hypercall to connect with the TPM Resource Manager, enabling
the guest to open and close TPM sessions with the host TPM.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
QEMU 4.1.0 introduced a new device type called TPM Proxy, currently
implemented by PPC64 guests via a new virtual device called
'spapr-tpm-proxy' (see QEMU 0fb6bd073230 for more info).
The TPM Proxy device interacts with a TPM Resource Manager, a host
device capable of multiplexing the host TPM with multiple processes.
This allows multiple guests to access some TPM features at the
same time. Note that this mode of operation does not provide
full TPM features to be available for the guest - for that case
the guest still needs to assign a vTPM device (tpm-spapr for
PPC64 guests). Although redundant, there is currently no technical
limitation for a guest to assign both a vTPM and a TPM Proxy at the
same time.
This patch adds documentation and schema for a new TPM model
type called 'spapr-tpm-proxy' that creates this new TPM Proxy
device. This model is valid only for the 'passthrough' backend.
An example of a TPM Proxy device connected to a TPM Resource Manager
'/dev/tpmrm0' will look like this:
<tpm model='spapr-tpm-proxy'>
<backend type='passthrough'>
<device path='/dev/tpmrm0'/>
</backend>
</tpm>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_autoptr() in qemuCaps to get rid of a virObjectUnref call,
a 'cleanup' label and the 'ret' pointer.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When building command line for IOMMU or machine, there are two
comments which mention function that validate IOMMU. But they
both refer to old name which was changed in v6.3.0-rc1~246.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Correct the log name for qemu_security.c to qemu.qemu_security
instead of qemu.qemu_process.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Integrate both 'disk-hostdev-scsi-virtio-iscsi-auth-AES' and
'hostdev-scsi-virtio-iscsi-auth' as the new test infrastructure tests
both legacy and 'secret' object cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Additionally this removes duplicated call of the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the authenticated iSCSI hostdevs to the same test file.
Additionally this now covers passing secret via the 'secret' object
rather than on the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
"hostdev-scsi-readonly" case tests the readonly disk with a virtio-scsi
controller. Add it for the 'lsi' controller test as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The build job for this container has been failing every single
time, and as it turns out the explanation for that is very simple:
Debian is just not going to support the mips architecture going
forward.
Reported-by: Pino Toscano <ptoscano@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The bitmap name used for the incremental backup would be leaked
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally the function was cleaning up a failed job only but now
there's other stuff that needs to be cleared too.
Make only steps which clean up after a failed job depend on the
'started' field and execute the rest of the code always.
This fixes a leak of the backup job tracking object and the blockdev-add
helper data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code would repeatedly mark the first disk's blockjob as started
rather than accessing all the blockjobs. Fix the dereferencing operator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Two functions called in sequence both initialized the virStorageSource
backing 'store' leading to a memleak.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup path expects that 'def' is assigned to 'priv->backup', but
that's not the case for early failures. Add a check to stop overwriting
of 'def' so that it can be freed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using virKModConfig would not simplify any existing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
