QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support downscript for booting vm,
and hotunplug interface device.
Signed-off-by: Chen Hanxiao <chen_han_xiao@126.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In qemu the argument of 'ipv6-net' is split up into 'ipv6-prefix' and
'ipv6-prefixlen'. Additionally now that 'netdev_add' was qapified, only
the real properties are allowed. Switch to using them explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'tftp' storage protocol was supported by qemu until 2.7.0. Add an
interlock when blockdev is used and drop the test case for it as it's
IMO not worth adding another test file just for that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This is not yet supported by virtiofsd.
Fixes#23 a.k.a. https://gitlab.com/libvirt/libvirt/-/issues/23
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Historically the virtio-blk frontend by default enabled SCSI emulation
and tried to do SCSI command passthrough. As this was enabled by default
there's a fallback mechanism in place in cases when the backend doesn't
support SCSI for any reason.
This is not the case when disk type=lun is used with 'scsi-block' via
'virtio-scsi'.
We did not restrict configurations when the user picks 'qcow2' or any
other format as format of the disk, in which case the emulation is
disabled as such configuration doesn't make sense.
This patch unifies the approach so that 'raw' is required both when used
via 'virtio-blk' and 'virtio-scsi' so that the user is presented with
the expected configuration. Note that use of <disk type='lun'> is
already very restrictive as it requires a block device or iSCSI storage.
Additionally the scsi emulation is now deprecated by qemu with
virtio-blk as it conflicts with virtio-1 and the alternative is to use
'virtio-scsi' which performs better and is along for a very long time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property was deprecated. Don't format it based on the new capability
if the user didn't explicitly request it.
https://bugzilla.redhat.com/show_bug.cgi?id=1829550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Help QEMU in deprecation of -drive if=none without the need to refactor
all old boards. Stop masking out -blockdev support when -drive if=sd
needs to be used. We achieve this by forbidding blockjobs and
special-casing all other code paths. Blockjobs are sacrificed in this
case as SD cards are a corner case for some ARM boards and are thus not
used commonly.
https://bugzilla.redhat.com/show_bug.cgi?id=1821692
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can't set the type of the device on the 'sd' bus and realistically a
cdrom doesn't even make sense there. Forbid it.
Note that the output of in disk-cdrom-bus-other.x86_64-latest.args
switched to blockdev as it's no longer locked out due to use of a disk
on 'sd' bus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'vexpress-a9' ARM board supports the native 'sd' bus as well as
virtio. Add a test case for proving that upcoming changes to handling of
'sd' work. This config was also tested with real qemu and the qemu
process starts correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to DO_TEST_CAPS_LATEST for all of them and also add pre-blockdev
case for 'disk-discard' as we had it before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the tests to DO_TEST_CAPS_LATEST. Since switch to blockdev stopped
us formatting the tunning parameters on the command line let's also add
version cases for qemu-4.1 data which doesn't enable blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
blockdev support has been introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
replies were generated on a POWER9 machine, which is good because
we didn't have coverage of that before.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add separate tests for individual options and devices for virtio-options
to have the ability to do more fine-granular testing of various
combinations.
Also, add negative tests for unavailable capabilities.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Convert the virtio-options test in qemuxml2argv and qemuxml2xml to use
the latest available QEMU capabilities.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.
IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".
This is the XML format for the cap:
<features>
<ibs value='fixed-ibs'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.
Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.
This is the XML format for the cap:
<features>
<sbbc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.
CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.
This is the XML format for the cap:
<features>
<cfpc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a pcie-root-port or pcie-downstream-port has hotplug='off' in its
<target> subelement, and if the qemu binary supports the hotplug=false
option, then it will be added to the commandline for the pcie
controller. This controller will then not allow any hotplug/unplug of
devices while the guest is running (and the hotplug capability won't
be advertised to the guest OS, so the guest OS also won't present
unplugging of PCI devices as an option).
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
For any PCI controllers other than pcie-downstream-port and
pcie-root-port, of for qemu binaries that don't support the hotplug
commandline option, an error will be logged during validation.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
a <controller type='pci'...> element can now have a "hotplug"
attribute in the <target> subelement. This is intended to control
whether or not the slot(s) of the controller support
hotplugging/unplugging a device:
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
The default value of hotplug is "on".
Since support for configuring such an option is hypervisor-dependent
(and will vary among different types of PCI controllers even on a
single hypervisor), no validation is done in this patch - that
validation will be done in the patch that wires support for the
setting into the hypervisor.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass the packed option on the QEMU command line of the capability for
packed virtqueues is detected and the parameter is set explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Update s390x capabilities for QEMU 4.2 with the actual GA version for
QEMU and on the latest z15 machine.
This picks up the new blockdev capability, so we need to refresh a bunch
of test cases as well.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Initially introduced in v3.10.0-rc1~172.
When generating a path for memory-backend-file or -mem-path, qemu
driver will use the following pattern:
$memoryBackingDir/libvirt/qemu/$id-$shortName
where $memoryBackingDir defaults to /var/lib/libvirt/qemu/ram but
can be overridden in qemu.conf. Anyway, the "/libvirt/qemu/" part
looks redundant, because it's already contained in the default,
or creates unnecessary nesting if overridden in qemu.conf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce new 'multidevs' option for filesystem.
<filesystem type='mount' accessmode='mapped' multidevs='remap'>
<source dir='/path'/>
<target dir='mount_tag'>
</filesystem>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When moving the formatting of this attributes from -drive
to -device, the QEMU_CAPS_USB_STORAGE_WERROR capability
was used, because usb-storage was the last device to gain
this capability.
However this lead to the assumption that QEMU binaries
without the usb-storage device do not support this,
leading to breakage on s390x with blockdev.
Fixes: bb4f3543bbhttps://bugzilla.redhat.com/show_bug.cgi?id=1819250
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To demonstrate the move of these attributes from -drive to -device.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If the storage source has the query part set, format it in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The quotes are forbidden only inside the value, but the value itself may
be enclosed in quotes. Fix the RNG schema and validator and add a test
case.
https://bugzilla.redhat.com/show_bug.cgi?id=1804750
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using the 'uuid' element for ppc64 NVDIMM memory added in the
previous patch, use it in qemuBuildMemoryDeviceStr() to pass
it over to QEMU.
Another ppc64 restriction is the necessity of a mem->labelsize,
given than ppc64 only support label-area backed NVDIMMs.
Finally, we don't want ppc64 NVDIMMs to align up due to the
high risk of going beyond the end of file with a 256MiB
increment that the user didn't predict. Align it down
instead. If target size is less than the minimum of
256MiB + labelsize, error out since QEMU will error out
if we attempt to round it up to the minimum.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
ppc64 NVDIMM support was implemented in QEMU by commit [1].
The support is similar to what x86 already does, aside from
an extra 'uuid' element.
This patch introduces a new optional 'uuid' element for the
NVDIMM memory model. This element behaves like the 'uuid'
element of the domain definition - if absent, we'll create
a new one, otherwise use the one provided by the XML.
The 'uuid' element is exclusive to pseries guests and are
unavailable for other architectures.
Next patch will use this new element to add NVDIMM support
for ppc64.
[1] ee3a71e366
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update ppc64 capabilities to pick up the new NVDIMM capability
support for ppc64.
Since the ppc64 capabilities weren't updated for some time, the
bulk of the changes here are related to the blockdev support
(see commit c6a9e54ce3 for info) that we are picking up just
now.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBlockStorageSourceGetFormatRawProps aggregated both formats but
since we now have props specific for either of those formats it's
unwanted to aggregate the code such way. Split out the 'luks' props
formatter into qemuBlockStorageSourceGetFormatLUKSProps.
The wrong separation demonstrates istself on formatting of the 'size'
and 'offset' attributes for the 'luks' driver which does not conform
to the qapi schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'luks' driver in qemu is as any other non-raw format driver and thus
doesn't support the properties for 'slice'. Since libvirt considers
luks files to be raw+encryption we need to special case them when
dealing with the slice.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since libvirt handles the luks encryption in a weird special way
(raw+encryption) we should really test that case with slices as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass the alias of the secret object holding the cookie data as
'cookie-secret' to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow disabling of SSL certificate validation for HTTPS and FTPS drives
in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will implement the support for sslverify, cookies,
readahead, and timeout properties. Add a test file which will collect
the cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally there was only the secret for authentication so we didn't use
any suffix to tell it apart. With the introduction of encryption we
added a 'luks' suffix for the encryption secrets. Since encryption is
really generic and authentication is not the only secret modify the
aliases for the secrets to better describe what they are used for.
This is possible as we store the disk secrets in the status XML thus
only new machines will use the new secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the 'vhost-user-fs' device on the QEMU command line.
This device provides shared file system access using the FUSE protocol
carried over virtio.
The actual file server is implemented in an external vhost-user-fs device
backend process.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Add more elements for tuning the virtiofsd daemon
and the vhost-user-fs device:
<driver type='virtiofs' queue='1024' xattr='on'>
<binary path='/usr/libexec/virtiofsd'>
<cache mode='always'/>
<lock posix='off' flock='off'/>
</binary>
</driver>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Introduce a new 'virtiofs' driver type for filesystem.
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/path'/>
<target dir='mount_tag'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</filesystem>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:
<domain><interface>
<domain><interface><actual> (only in domain status)
<network>
<networkport>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting a KVM domain on s390 with old machine type (such as
s390-ccw-virtio-2.5) and without any guest CPU model configured fails
with
CPU models are not available: KVM doesn't support CPU models
QEMU error. This is cause by libvirt using host-model CPU as the default
CPU based on QEMU reporting "host" CPU model as being the default one
(see commit v5.9.0-402-g24d8202294: qemu: Use host-model CPU on s390 by
default). However, even though both QEMU and KVM support CPU models on
s390 and QEMU can give us the host-model CPU, we can't use it with old
machine types which only support -cpu host.
https://bugzilla.redhat.com/show_bug.cgi?id=1795651
Reported-by: Christian Ehrhardt <paelzer@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds a test case for domain XML with the tpm-spapr TPM device
model.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The subelement <teaming> of <interface> devices is used to configure a
simple teaming association between two interfaces in a domain. Example:
<interface type='bridge'>
<source bridge='br0'/>
<model type='virtio'/>
<mac address='00:11:22:33:44:55'/>
<alias name='ua-backup0'/>
<teaming type='persistent'/>
</interface>
<interface type='hostdev'>
<source>
<address type='pci' bus='0x02' slot='0x10' function='0x4'/>
</source>
<mac address='00:11:22:33:44:55'/>
<teaming type='transient' persistent='ua-backup0'/>
</interface>
The interface with <teaming type='persistent'/> is assumed to always
be present, while the interface with type='transient' may be be
unplugged and later re-plugged; the persistent='blah' attribute (and
in the one currently available implementation, also the matching MAC
addresses) is what associates the two devices with each other. It is
up to the hypervisor and the guest network drivers to determine what
to do with this information.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
None of the tests depend on anything that the machine type would
influence. This will allow us to drop the very old machine type from the
non-real-data tests. If something depends on the machine type it should
be tested with real data rather than this hack.
Note that these tests are run only in the XML->XML suite because the
XML->argv suite doesn't work with the network driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
None of the tests depend on anything that the machine type would
influence. This will allow us to drop the very old machine type from the
non-real-data tests. If something depends on the machine type it should
be tested with real data rather than this hack.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the old machine type which will be dropped in the upcomming
qemu-5.0 release from tests used against the most recent capabilities
data.
None of the modified tests really cares about the actual machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous approac of just purging the alias combined with the fact
that we filled in fake machine types in the test data meant that if a
test case used an alias machine type such as 'pc' or 'q35' it would not
properly resolve to the actual data returned by qemu.
This started to be a problem since the CPU driver now looks at the
default CPU reported with the machine type.
This patch replaces the original approach of just removing the alias by
replacing it with a copy of the machine type data which the type would
alias to. This means that we are using the real data while we don't
modify the test output after every qemu upgrade.
Additionally this change will allow us to drop adding the fake machine
types later.
The test fallout is from actually excercising the CPU driver with
actual data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the 's390-ccw-virtio' machine type which is actually supported by
the qemu we gathered the test data from.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This machine type comes from downstream ubuntu 15.10. Replace it with a
somewhat equivalent qemu-2.3 machine type as we do have test data for
that.
The change allows the CPU code to pick a proper default CPU in the
'-latest' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'versatilepb' instead of a fake 'non-virt' machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For testing with synthetic capabilities we pre-fill the qemu
capabilities with some machine types. Historically there were two arrays
for KVM and TCG but that's not necessary. Make both instances of x86_64
data share the same array as the other architectures do.
This will later on simplify filling in all the other machine types which
are required for the test suite.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The tests prefixed default-video* were enabled only for the xml2xml
testing and used impossible configurations.
Enable them for xml2argv testing fix them:
1) aarch64: remove pointless cpu mode
2) s390x: remove pointless cpu and use existing machine type
3) riscv: remove pointless cpu
4) x86: remove pointless cpu and use existing machine type
5) ppc65: use correct machine type and enable USB
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
XML->XML testing uses DO_TEST_CAPS_LATEST so use it also for the
XML->argv testing. Additionally use the same more modern machine type
in both tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The data is tested against the latest qemu binaries so we should use the
proper architecture. Also the test is used against data from qemu 1.5.3
and thus we should use a machine type that qemu supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since v4.2-rc0, QEMU introduced a builtin rng backend that uses
getrandom() syscall to generate random. Add it to libvirt with the
backend model 'builtin'.
https://bugzilla.redhat.com/show_bug.cgi?id=1785091
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU since 4.1.0 supports the "dies" parameter for -smp
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Recently CPU hardware vendors have started to support a new structure
inside the CPU package topology known as a "die". Thus the hierarchy
is now:
sockets > dies > cores > threads
This adds support for "dies" in the XML parser, with the value
defaulting to 1 if not specified for backwards compatibility.
For example a system with 64 logical CPUs might report
<topology sockets="4" dies="2" cores="4" threads="2"/>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add another disk to luks-disks-source-qcow2 case to cover a backing
chain with encrypted members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is no need to require users to produce iSCSI disk source
following our ordering of children elements. In fact, we don't
even accept our own order in the schema :(.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Previous patch made it possible for the QEMU driver to check if
a given PCI hostdev is unassigned, by checking if dev->info->type is
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device
shouldn't be part of the actual guest launch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now, that we have everything prepared, we can generate command
line for NVMe disks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There is this class of PCI devices that act like disks: NVMe.
Therefore, they are both PCI devices and disks. While we already
have <hostdev/> (and can assign a NVMe device to a domain
successfully) we don't have disk representation. There are three
problems with PCI assignment in case of a NVMe device:
1) domains with <hostdev/> can't be migrated
2) NVMe device is assigned whole, there's no way to assign only a
namespace
3) Because hypervisors see <hostdev/> they don't put block layer
on top of it - users don't get all the fancy features like
snapshots
NVMe namespaces are way of splitting one continuous NVDIMM memory
into smaller ones, effectively creating smaller NVMe-s (which can
then be partitioned, LVMed, etc.)
Because of all of this the following XML was chosen to model a
NVMe device:
<disk type='nvme' device='disk'>
<driver name='qemu' type='raw'/>
<source type='pci' managed='yes' namespace='1'>
<address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.
This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.
All other tests were adapted to consider SPICE validation in this
earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On s390 machines host-passthrough and host-model CPUs result in the same
guest ABI (with QEMU new enough to be able to tell us what "host" CPU is
expanded to, which was implemented around 2.9.0). So instead of using
host-passthrough CPU when there's no CPU specified in a domain XML we
can safely use host-model and benefit from CPU compatibility checks
during migration, snapshot restore and similar operations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case for x86_64 and neither cirrus nor vga capability is of the
xml2argv type because it actually fails to parse the XML at all [*] which
is something that xml2xml tests don't seem to handle. xml2argv test fails
to produce a qemu argv for this case which xml2argv tests can handle.
[*] This is a consequence of the decision not to have a fallback if the
obvious choices (cirrus and vga) aren't viable due to missing QEMU caps.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
Now that all pieces are in place (hopefully) let's enable -blockdev.
We base the capability on presence of the fix for 'auto-read-only' on
files so that blockdev works properly, mandate that qemu supports
explicit SCSI id strings to avoid ABI regression and that the fix for
'savevm' is present so that internal snapshots work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When starting a domain without a CPU model specified in the domain XML,
QEMU will choose a default one. Which is fine unless the domain gets
migrated to another host because libvirt doesn't perform any CPU ABI
checks and the virtual CPU provided by QEMU on the destination host can
differ from the one on the source host.
With QEMU 4.2.0 we can probe for the default CPU model used by QEMU for
a particular machine type and store it in the domain XML. This way the
chosen CPU model is more visible to users and libvirt will make sure
the guest will see the exact same CPU after migration.
Architecture specific notes
- aarch64: We only set the default CPU for TCG domains as KVM requires
explicit "-cpu host" to work.
- ppc64: The default CPU for KVM is "host" thanks to some hacks in QEMU,
we will translate the default model to the model corresponding to the
host CPU ("POWER8" on a Power8 host, "POWER9" on Power9 host, etc.).
This is not a problem as the corresponding CPU model is in fact an
alias for "host". This is probably not ideal, but it's not wrong and
the default virtual CPU configured by libvirt is the same QEMU would
use. TCG uses various CPU models depending on machine type and its
version.
- s390x: The default CPU for KVM is "host" while TCG defaults to "qemu".
- x86_64: The default CPU model (qemu64) is not runnable on any host
with KVM, but QEMU just disables unavailable features and starts
happily.
https://bugzilla.redhat.com/show_bug.cgi?id=1598151https://bugzilla.redhat.com/show_bug.cgi?id=1598162
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
When a CPU definition wants to explicitly disable some features that are
unknown to QEMU, we can safely drop them from the definition before
starting QEMU. Naturally QEMU won't enable such features implicitly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't allow such config in the schema but the code can handle that so
add a test case supporting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit let QEMU command line define 'xres' and 'yres' properties
if XML contains both properties from video model: based on resolution
fields 'x' and 'y'. There is a conditional structure inside
qemuDomainDeviceDefValidateVideo() that validates if video model
supports this feature. This commit includes the necessary changes to
cover resolution for 'video-qxl-resolution' test cases too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit fb973cfbb4 added versioned test outputs for the above mentioned
tests but didn't actually enable them. Fix that mistake and fix the
output of the tsc-frequency test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test data was modernized to use actual caps but commit 4dadcaa98e
forgot to delete this test data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser.
The argv generator tests are provided by:
machine-aeskeywrap-on-caps
machine-aeskeywrap-on-cap
machine-aeskeywrap-off-caps
machine-aeskeywrap-off-cap
machine-deakeywrap-on-caps
machine-deakeywrap-on-cap
machine-deakeywrap-off-caps
machine-deakeywrap-off-cap
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser. The same functionality is tested by many tests for
pseries guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The last use was removed in 7b604379ba when we deleted the old
commandline parser. The same functionality is tested by
'serial-pty-chardev'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The way in which the qemu driver generates aliases for disks involves
ignoring the partition number part of a target dev name. This means that
all partitions of a block device and the device itself all end up with the
same alias. If multiple such disks are specified in XML, the resulting
name clash makes qemu invocation fail.
Since attaching partitions to qemu VMs doesn't seem to make much sense
anyway, disallow partitions in target specifications altogether.
https://bugzilla.redhat.com/show_bug.cgi?id=1346265
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The video private data was not initializing the vhostuser FD
causing us to attempt to close FD 0 many times over.
Fixes
commit ca60ecfa8c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:36 2019 +0400
qemu: add qemuDomainVideoPrivate
Since the test suite does not invoke qemuExtDevicesStart(), no
vhost_user_fd will be present when generating test XML. To deal
with this we can must a fake FD number. While the current XML
is using FD == 0, we pick a very interesting number that's unlikely
to be a real FD, so that we're more likely to see any mistakes
closing the invalid FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For each vhost-user GPUs,
- build a socket chardev, and pass the vhost-user socket to it
- build a vhost-user video device and associate it with the chardev
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vhost-user device doesn't have a virgl option, it is passed to the
vhost-user-gpu helper process instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vhost-user-gpu helper takes --render-node option to specify on which
GPU should the renderning be done.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept a new driver name attribute to specify usage of helper process, ex:
<video>
<driver name='vhostuser'/>
<model type='virtio'/>
</video>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that qemu is capable -netdev socket is not enough to
start a migratable domain. It also needs dbus-vmstate capability.
Since there are already some qemu releases which have
net-socket-dgram capability and don't have dbus-vmstate we need
to check for dbus-vmstate.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If managed='no', then the tap device must already exist, and setting
of MAC address and online status (IFF_UP) is skipped.
NB: we still set IFF_VNET_HDR and IFF_MULTI_QUEUE as appropriate,
because those bits must be properly set in the TUNSETIFF we use to set
the tap device name of the handle we've opened - if IFF_VNET_HDR has
not been set and we set it the request will be honored even when
running libvirtd unprivileged; if IFF_MULTI_QUEUE is requested to be
different than how it was created, that will result in an error from
the kernel. This means that you don't need to pay attention to
IFF_VNET_HDR when creating the tap devices, but you *do* need to set
IFF_MULTI_QUEUE if you're going to use multiple queues for your tap
device.
NB2: /dev/vhost-net normally has permissions 600, so it can't be
opened by an unprivileged process. This would normally cause a warning
message when using a virtio net device from an unprivileged
libvirtd. I've found that setting the permissions for /dev/vhost-net
permits unprivileged libvirtd to use vhost-net for virtio devices, but
have no idea what sort of security implications that has. I haven't
changed libvrit's code to avoid *attempting* to open /dev/vhost-net -
if you are concerned about the security of opening up permissions of
/dev/vhost-net (probably a good idea at least until we ask someone who
knows about the code) then add <driver name='qemu'/> to the interface
definition and you'll avoid the warning message.
Note that virNetDevTapCreate() is the correct function to call in the
case of an existing device, because the same ioctl() that creates a
new tap device will also open an existing tap device.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.
This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.
0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions
Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The softlink to physfn is the way to know if the device is
VF or not. So, the patch softlinks 'physfn' to the parent function.
The multifunction PCI devices dont have 'physfn' softlinks.
The patch adds few Virtual functions to the mock environment and
changes the existing VFIO test xmls using the VFs to use the newly
added VFs for their use case.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is failing, because it ends up being parsed with version='default'
and expects '1.2' instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.
To avoid this, don't clear the user-defined alias for video devices of
type "none".
https://bugzilla.redhat.com/show_bug.cgi?id=1720612
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Adding a failure test for booting from a vhost scsi hostdev device.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU-4.1 supports 'Direct Mode' for Hyper-V synthetic timers
(hv-stimer-direct CPU flag): Windows guests can request that timer
expiration notifications are delivered as normal interrupts (and not
VMBus messages). This is used by Hyper-V on KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In particular, use DO_TEST_CAPS_LATEST which tests the canonical
'hv-feature' syntax instead of 'hv_feature' aliases and DO_TEST_CAPS_VER
with 4.0.0 to also test the old syntax.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The pci-assign device is so old school that no one uses it. All
modern systems have adapted VFIO. Switch our xml2argv test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Update the KVM feature tests for QEMU's kvm-hint-dedicated
performance hint.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is no restriction on maximum value of PCI domain. In fact,
Linux kernel uses plain atomic inc when assigning PCI domains:
drivers/pci/pci.c:static int pci_get_new_domain_nr(void)
drivers/pci/pci.c-{
drivers/pci/pci.c- return atomic_inc_return(&__domain_nr);
drivers/pci/pci.c-}
Of course, this function is called only if kernel was compiled
without PCI domain support or ACPI did not provide PCI domain.
However, QEMU still has the same restriction as us: in
set_pci_host_devaddr() QEMU checks if domain isn't greater than
0xffff. But one can argue that that's a QEMU limitation. We still
want to be able to cope with other hypervisors that don't have
this limitation (possibly).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it's true that older QEMUs were not able to deal with PCI
domains, we don't support those versions anymore (see
4a42ece13a). Therefore it is safe to always format fully
expanded PCI address. Format PCI domain always as it will
simplify next commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with QEMU 4.1, we're using the canonical feature names on the
command line and avoid aliases to prepare for possible deprecation of
all aliases in QEMU. But we do so only for features from our CPU map,
hyperv features defined in the code were unchanged and this patch fixes
it. Some features use "hv-" prefix unconditionally because they were
introduced recently enough to always support spelling with a dash.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU command line does not change when TPM state is encrypted
compared to when it is plain.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a test case for the TPM XML encryption parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To allow using -blockdev with blockjobs QEMU needs to reopen files in
read-write mode when modifying the backing chain. To achieve this we
need to use 'auto-read-only' for the backing files rather than the
normal 'read-only' property. That way qemu knows that the files need to
be reopened.
Note that the format drivers (e.g. qcow2) are still opened with the
read-only property enabled when being a member of the backing chain
since they are supposed to be immutable unless a block job is started.
QEMU v4.0 (since commit 23dece19da4) allows also dynamic behaviour for
auto-read-only which allows us to use sVirt as we only grant write
permissions to files when doing a blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the existing fs9p.xml and fs9p-ccw.xml to run the tests
with latest caps on x86_64 and s390x.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When validating a domain among all the checks there are two that
concern VIR_DOMAIN_LOADER_TYPE_PFLASH specifically. The first
check ensures that on x86 ACPI is enabled when UEFI is requested,
the second ensures that UEFI is used when ACPI is requested on
aarch64. However, check for UEFI is done by plain comparison of
def->os.loader->type which is insufficient because we have
def->os.firmware too.
NB, this wouldn't be a problem for active domain, because on
startup process def->os.loader->type gets filled by
qemuFirmwareEnableFeatures(), but that's not the case for
inactive domains.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1729604
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Our code would skip adding the default type in this cases, but since we
know that the only reasonable option here is 'fat' we can add it while
starting the VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage volume may in fact convert into a directory when starting
the VM so that it may be actually possible to use it.
This is a regression caused by c9b27af32d as moving the check to
validation time without adjustment causes problems as the volumes are
not translated yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for this has only relatively recently been added to
virt-manager.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the latest virt-manager to regenerate the files.
The command line is once again along the lines of
$ virt-install \
--name guest --os-variant fedora29 \
--vcpus 4 --memory 4096 --disk size=5 \
--graphics (none|vnc) \
--print-xml
with some minor tweaks performed afterwards.
This removes a number of inconsistencies between the files,
and makes it so the only differences are actually relevant
either to the architecture and machine type at hand, or to
having graphics rather than being headless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now *-headless and *-graphics tests are using different
quoting styles, which results in the diff between them being
basically useless, whereas we would like it to be possible to
compare these files directly and easily spot the differences.
Convert all *-graphics tests to single quotes, which is the
style libvirt itself uses when formatting XML: this is a fact
that will come in handy later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Show that the capability tweaking stuff works by enabling blockdev in
the 'qemu-ns' test even in versions where it's not yet fully supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the DO_TEST_CAPS_LATEST/VER infrastructure to run a more modern
version of this and also fork it to a pre-blockdev version so that we
can check the qemu namespace capability tweaking.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly how we allow adding arbitrary command line arguments and
environment variables this patch introduces the ability to control
libvirt's perception of the qemu process by tweaking the capability bits
for testing purposes.
The idea is to allow developers and users either test a new feature by
enabling it early or disabling it to see whether it introduced
regressions.
This feature is not meant for production use though, so users should
handle it with care.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
No reason not to be consistent with the user-visible value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test case shows that we now reject invalid spapr-vio
addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When building QEMU command line, we should use the preferred spelling of
each CPU feature without relying on compatibility aliases (which may be
removed at some point).
The "unavailable-features" CPU property is used as a witness for the
correct names of the features in our translation table.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This should cover all CPU features for which QEMU prefers spelling that
differs from the one used by libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Newer QEMU will translate the feature names to their canonical names so
4.0.0 is the last one which produces the results we currently have in
*-latest.args.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Normal CPU features use modern -cpu ...,feature=on|off syntax when
available, but kvm features kept using the old +feature or -feature.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
