Since we don't have syntax-check for this, it has to be checked
manually. Let's hope this is the only place it happened.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This only affected the servers that re-exec themselves, which is only
virtlockd and it didn't do any mess, so this is mostly a clenaup.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We have these configuration knobs, like max_clients and
max_anonymous_clients. They limit the number of clients
connected. Whenever the limit is reached, the daemon stops
accepting new ones and resumes if one of the connected clients
disconnects. If that's the case, a debug message is printed into
the logs. And when the daemon starts over to accept new clients
too. However, the problem is the messages have debug priority.
This may be unfortunate, because if the daemon stops accepting
new clients all of a sudden, and users don't have debug logs
enabled they have no idea what's going on. Raise the messages
level to INFO at least.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.
The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Coverity spotted a use of possibly undefined variable. If a server is
restarting as an result of update, the JSON file that keeps current
value of some variables will not contain the new variables. This is
the case of @max_anonymous_clients too. We are correctly querying if
there's "max_anonymous_clients" in the JSON, however, we are not
setting a sane default if there's none.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=992980
This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The counter gets incremented on each unauthenticated client added to the
server and decremented whenever the client authenticates.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are still two places where we are using 1bit width unsigned
integer to store a boolean. There's no real need for this and these
occurrences can be replaced with 'bool'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, even if max_client limit is hit, we accept() incoming
connection request, but close it immediately. This has disadvantage of
not using listen() queue. We should accept() only those clients we
know we can serve and let all other wait in the (limited) queue.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We need to drop the server lock before calling virObjectUnlock(client)
since in case we had the last reference to the client, its dispose
callback would be called and that could possibly try to lock the server
and cause a deadlock. This is exactly what happens when there is only
one QEMU domain running and it is marked to be autodestroyed when the
connection dies. This results in qemuProcessAutoDestroy ->
qemuProcessStop -> virNetServerRemoveShutdownInhibition call sequence,
where the last function locks the server.
Currently all classes must directly inherit from virObject.
This allows for arbitrarily deep hierarchy. There's not much
to this aside from chaining up the 'dispose' handlers from
each class & providing APIs to check types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
RHEL 6.3 uses dbus-devel-1.2.24, which lacked support for the
DBUS_TYPE_UNIX_FD define (contrast with Fedora 18 using 1.6.8).
But since it is an older dbus, it also lacks support for shutdown
inhibitions as provided by newer systemd.
Compilation failure introduced in commit 31330926.
* src/rpc/virnetserver.c (virNetServerAddShutdownInhibition):
Compile out if dbus is too old.
Use the freedesktop inhibition DBus service to prevent host
shutdown or session logout while any VMs are running.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerNewPostExecRestart and
virNetServerPreExecRestart which allow a virNetServerPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of all registered services
and clients
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerClientNewPostExecRestart and
virNetServerClientPreExecRestart which allow a virNetServerClientPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the connected socket associated
with the client
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Currently the virNetServerDispatchNewClient both creates the
virNetServerClientPtr instance and registers it with the
virNetServerPtr internal state. Split the client registration
code out into a separate virNetServerAddClient method to
allow future reuse from other contexts
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently there is a hook function that is invoked when a
new client connection comes in, which allows an app to
setup private data. This setup will make it difficult to
serialize client state during process re-exec(). Change to
a model where the app registers a callback when creating
the virNetServerPtr instance, which is used to allocate
the client private data immediately during virNetClientPtr
construction.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virNetServerServicePtr is responsible for
creating the virNetServerClientPtr instance when accepting
a new connection. Change this so that the virNetServerServicePtr
merely gives virNetServerPtr a virNetSocketPtr instance. The
virNetServerPtr can then create the virNetServerClientPtr
as it desires
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 1f6f723 missed a step. At first I was worried that scrubbing
the conditionals would lead to a runtime failure when compiled without
avahi, but my testing makes it appear that the runtime error will only
occur if the .conf files in /etc request mdns advertisement; and the
old behavior was to silently ignore the request, so this is actually
a better behavior of only failing when the config requests the
impossible.
* src/rpc/virnetserver.c: Drop HAVE_AVAHI conditionals; all
callers already passed NULL if mdns_adv was not configured.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
To allow virNetServerRun/virNetServerQuit to be invoked multiple
times, we must reset the 'quit' flag in virNetServerRun
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
