There are no storage pools in Parallels Cloud Server -
All VM data stored in a single directory: config, snapshots,
memory dump together with disk images.
Let's look through list of VMs and create a storage pool for
each directory, containing VMs.
So if you have 3 vms: /var/parallels/vm-1.pvm,
/var/parallels/vm-2.pvm and /root/test.pvm - 2 storage pools
appear: -var-parallels and -root. xml descriptions of the pools
will be saved in /etc/libvirt/parallels-storage, so UUIDs will
not change netween connections to libvirt.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We don't support unprivileged users anymore, so remove code, which
selects configuration directory depending on user.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Allow changing some parameters of the hard disks: bus,
image and drive address.
Creating new disk devices and removing existing ones
require changes in the storage driver, so it will be
implemented later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.
Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
This fixes a problem that showed up during testing of:
https://bugzilla.redhat.com/show_bug.cgi?id=881480
Due to a logic error in the function that gets the name of the bridge
an interface connects to, any time a bridge was specified directly
(type='bridge') rather than indirectly (type='network'), An error
would be logged (although the operation would then complete
successfully):
Network type 6 is not supported
The final virReportError() in the function
qemuDomainNetGetBridgeName() was apparently avoided in the past with a
"goto cleanup" at the end of each case, but the case of bridge somehow
no longer has that final goto cleanup.
The proper solution is anyway to not rely on goto's, but put the error
log inside an else {} clause, so that it's executed only if the type
is neither bridge nor network (in reality, this function should only
ever be called for those two types, that's why this is an internal
error).
While making this change, the error message was also tuned to be more
correct (since it's not really the type of the network, but the type
of the interface, and it *is* otherwise supported, it's just that the
interface type in question doesn't *have* a bridge device associated
with it, or at least we don't know how to get it).
If a network interface model is not specified, libvirt will run
into an unchecked NULL pointer coredump. On the other hand if
the empty model is ignored, a PCI bus address would be generated,
which is not supported by S390.
Since the only valid network type model for S390 is virtio,
we use this as the default value, which is the same for QEMU.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Things are supposed to look like:
<machine canonical='pc-0.12'>pc</machine>
But are currently swapped. This can cause many VMs to revert to having
machine type='pc' which will affect save/restore across qemu upgrades.
Add VIR_STORAGE_VOL_CREATE_PREALLOC_METADATA flag to virStorageVolCreateXML
and virStorageVolCreateXMLFrom. This flag requests metadata
preallocation when creating/cloning qcow2 images, resulting in creating
a sparse file with qcow2 metadata. It has only slightly larger disk usage
compared to new image with no allocation, but offers higher performance.
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
Based on a patch originally authored by Daniel De Graaf
http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html
This patch converts the Xen libxl driver to support only Xen >= 4.2.
Support for Xen 4.1 libxl is dropped since that version of libxl is
designated 'technology preview' only and is incompatible with Xen 4.2
libxl. Additionally, the default toolstack in Xen 4.1 is still xend,
for which libvirt has a stable, functional driver.
virGetGroupIDByName is documented as returning 1 if the groupname
cannot be found. getgrnam_r is documented as returning:
« 0 or ENOENT or ESRCH or EBADF or EPERM or ... The given name
or gid was not found. »
and that:
« The formulation given above under "RETURN VALUE" is from POSIX.1-2001.
It does not call "not found" an error, hence does not specify what
value errno might have in this situation. But that makes it impossible to
recognize errors. One might argue that according to POSIX errno should be
left unchanged if an entry is not found. Experiments on various UNIX-like
systems shows that lots of different values occur in this situation: 0,
ENOENT, EBADF, ESRCH, EWOULDBLOCK, EPERM and probably others. »
virGetGroupIDByName returns an error when the return value of getgrnam_r
is non-0. However on my RHEL system, getgrnam_r returns ENOENT when the
requested user cannot be found, which then causes virGetGroupID not
to behave as documented (it returns an error instead of falling back
to parsing the passed-in value as an gid).
This commit makes virGetGroupIDByName only report an error when errno
is set to one of the values in the posix description of getgrnam_r
(which are the same as the ones described in the manpage on my system).
virGetUserIDByName is documented as returning 1 if the username
cannot be found. getpwnam_r is documented as returning:
« 0 or ENOENT or ESRCH or EBADF or EPERM or ... The given name
or uid was not found. »
and that:
« The formulation given above under "RETURN VALUE" is from POSIX.1-2001.
It does not call "not found" an error, hence does not specify what
value errno might have in this situation. But that makes it impossible to
recognize errors. One might argue that according to POSIX errno should be
left unchanged if an entry is not found. Experiments on various UNIX-like
systems shows that lots of different values occur in this situation: 0,
ENOENT, EBADF, ESRCH, EWOULDBLOCK, EPERM and probably others. »
virGetUserIDByName returns an error when the return value of getpwnam_r
is non-0. However on my RHEL system, getpwnam_r returns ENOENT when the
requested user cannot be found, which then causes virGetUserID not
to behave as documented (it returns an error instead of falling back
to parsing the passed-in value as an uid).
This commit makes virGetUserIDByName only report an error when errno
is set to one of the values in the posix description of getpwnam_r
(which are the same as the ones described in the manpage on my system).
If debugging is enabled, the debug messages are sent to stderr.
Moreover, if a command has catching of stderr set, the messages
gets mixed with stdout output (assuming both outputs are stored
in the same variable). The resulting string then doesn't
necessarily have to start with desired prefix then. This bug
exposes itself when parsing dnsmasq output:
2012-12-06 11:18:11.445+0000: 18491: error :
dnsmasqCapsSetFromBuffer:664 : internal error cannot parse
/usr/sbin/dnsmasq version number in '2012-12-06
11:11:02.232+0000: 18492: debug : virFileClose:72 : Closed fd 22'
We can clearly see that the output of dnsmasq --version doesn't
start with expected "Dnsmasq version " string but a libvirt debug
output.
If the debugging is enabled, the virCommand subsystem catches debug
messages in the command output as well. In that case, we can't assume
the string corresponding to command's stdout will start with specific
prefix. But the prefix can be moved deeper in the string. This bug
shows itself when parsing dnsmasq output:
2012-12-06 11:18:11.445+0000: 18491: error :
dnsmasqCapsSetFromBuffer:664 : internal error cannot parse
/usr/sbin/dnsmasq version number in '2012-12-06 11:11:02.232+0000:
18492: debug : virFileClose:72 : Closed fd 22'
We can clearly see that the output of dnsmasq --version
doesn't start with expected "Dnsmasq version " string but a libvirt
debug output.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=767057
It was possible to define a network with <forward mode='bridge'> that
had both a bridge device and a forward device defined. These two are
mutually exclusive by definition (if you are using a bridge device,
then this is a host bridge, and if you have a forward dev defined,
this is using macvtap). It was also possible to put <ip>, <dns>, and
<domain> elements in this definition, although those aren't supported
by the current driver (although it's conceivable that some other
driver might support that).
The items that are invalid by definition, are now checked in the XML
parser (since they will definitely *always* be wrong), and the others
are checked in networkValidate() in the network driver (since, as
mentioned, it's possible that some other network driver, or even this
one, could some day support setting those).
This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified. This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).
This patch adds a new attribute "ipv6" at the toplevel of a <network>
object. If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.
Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:
net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1
This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.
To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.
Documentation related to this patch has been updated.
The network schema has also been updated.
https://bugzilla.redhat.com/show_bug.cgi?id=832302
It's odd to fall through to buildVol, and the existed file is
removed when buildVol fails. This checks if the volume target
path already exists in createVol. The reason for not using
error like "Volume already exists" is that there isn't volume
maintained by libvirt for the path until a operation like
pool-refresh, using error like that will just cause confusion.
https://bugzilla.redhat.com/show_bug.cgi?id=866524
Since the virConnect object is not locked wholely when doing
virConenctDispose, a thread can get the lock and thus might
cause the race.
Detected by valgrind:
==23687== Invalid read of size 4
==23687== at 0x38BAA091EC: pthread_mutex_lock (pthread_mutex_lock.c:61)
==23687== by 0x3FBA919E36: remoteClientCloseFunc (remote_driver.c:337)
==23687== by 0x3FBA936BF2: virNetClientCloseLocked (virnetclient.c:688)
==23687== by 0x3FBA9390D8: virNetClientIncomingEvent (virnetclient.c:1859)
==23687== by 0x3FBA851AAE: virEventPollRunOnce (event_poll.c:485)
==23687== by 0x3FBA850846: virEventRunDefaultImpl (event.c:247)
==23687== by 0x40CD61: vshEventLoop (virsh.c:2128)
==23687== by 0x3FBA8626F8: virThreadHelper (threads-pthread.c:161)
==23687== by 0x38BAA077F0: start_thread (pthread_create.c:301)
==23687== by 0x33F68E570C: clone (clone.S:115)
==23687== Address 0x4ca94e0 is 144 bytes inside a block of size 312 free'd
==23687== at 0x4A0595D: free (vg_replace_malloc.c:366)
==23687== by 0x3FBA8588B8: virFree (memory.c:309)
==23687== by 0x3FBA86AAFC: virObjectUnref (virobject.c:145)
==23687== by 0x3FBA8EA767: virConnectClose (libvirt.c:1458)
==23687== by 0x40C8B8: vshDeinit (virsh.c:2584)
==23687== by 0x41071E: main (virsh.c:3022)
The above race is caused by the eventLoop thread tries to handle
the net client event by calling the callback set by:
virNetClientSetCloseCallback(priv->client,
remoteClientCloseFunc,
conn, NULL);
I.E. remoteClientCloseFunc, which lock/unlock the virConnect object.
This patch is to fix the bug by setting the callback to NULL when
doRemoteClose.
The pciWrite32 function assembled the array of data to be written to the
fd with a bad offset on the last byte. This issue was probably caused by
a typo (14, 24).
Unmanaged PCI devices were only leaked if pciDeviceListAdd failed but
managed devices were always leaked. And leaking PCI device is likely to
leave PCI config file descriptor open. This patch fixes
qemuReattachPciDevice to either free the PCI device or add it to the
inactivePciHostdevs list.
An attempt to attach device that is already attached to a domain results
in the following error:
virsh # attach-device rhel6 pci2 --persistent
error: Failed to attach device from pci2
error: invalid argument: device is already in the domain configuration
The "invalid argument" error code looks wrong, we usually use "operation
invalid" when the action cannot be done in current state.
Only one error in qemu_monitor was already using the relatively
new OPERATION_UNSUPPORTED error, even though it is a better fit
for all of the messages related to options that are unsupported
due to the version of qemu in use rather than due to a user's
XML or .conf file choice. Suggested by Osier Yang.
* src/qemu/qemu_monitor.c (qemuMonitorSendFileHandle)
(qemuMonitorAddHostNetwork, qemuMonitorRemoveHostNetwork)
(qemuMonitorAttachDrive, qemuMonitorDiskSnapshot)
(qemuMonitorDriveMirror, qemuMonitorTransaction)
(qemuMonitorBlockCommit, qemuMonitorDrivePivot)
(qemuMonitorBlockJob, qemuMonitorSystemWakeup)
(qemuMonitorGetVersion, qemuMonitorGetMachines)
(qemuMonitorGetCPUDefinitions, qemuMonitorGetCommands)
(qemuMonitorGetEvents, qemuMonitorGetKVMState)
(qemuMonitorGetObjectTypes, qemuMonitorGetObjectProps)
(qemuMonitorGetTargetArch): Use better error category.
Without this patch, attempts to create a disk snapshot when qemu
is too old results in a cryptic message:
virsh # snapshot-create 23 --disk-only
error: operation failed: Failed to take snapshot: unknown command: 'snapshot_blkdev'
Now it reports:
virsh # snapshot-create 23 --disk-only
error: unsupported configuration: live disk snapshot not supported with this QEMU binary
All versions of qemu that support live disk snapshot also support
QMP (basically upstream qemu 1.1 and later, and backports to RHEL 6.2).
* src/qemu/qemu_capabilities.h (QEMU_CAPS_DISK_SNAPSHOT): New
capability.
* src/qemu/qemu_capabilities.c (qemuCaps): Track it.
(qemuCapsProbeQMPCommands): Set it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive): Use
it.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Simplify.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextDiskSnapshot):
Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDiskSnapshot):
Likewise.
RHEL 6.3 uses dbus-devel-1.2.24, which lacked support for the
DBUS_TYPE_UNIX_FD define (contrast with Fedora 18 using 1.6.8).
But since it is an older dbus, it also lacks support for shutdown
inhibitions as provided by newer systemd.
Compilation failure introduced in commit 31330926.
* src/rpc/virnetserver.c (virNetServerAddShutdownInhibition):
Compile out if dbus is too old.
Implement the domainManagedSave, domainHasManagedSaveImage, and
domainManagedSaveRemove functions in the libvirt legacy xen driver.
domainHasManagedSaveImage check the managedsave image from filesystem
everytime. This is different from qemu and libxl driver. In qemu or
libxl driver, there is a hasManagesSave flag in virDomainObjPtr which
is not used in xen legacy driver. This flag could not add into xen
driver ptr either, because the driver ptr will be released at the end of
every libvirt api call. Meanwhile, AFAIK, xen store all the flags in
xen not in libvirt xen driver. There is no need to add this flag in xen.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
Use the freedesktop inhibition DBus service to prevent host
shutdown or session logout while any VMs are running.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The only important state that should prevent libvirtd shutdown
is from running VMs. Networks, host devices, network filters
and storage pools are all long lived resources that have no
significant in-memory state. They should not block shutdown.
The patch adds the backend driver to support iSCSI format storage pools
and volumes for ESX host. The mapping of ESX iSCSI specifics to Libvirt
is as follows:
1. ESX static iSCSI target <------> Libvirt Storage Pools
2. ESX iSCSI LUNs <------> Libvirt Storage Volumes.
The above understanding is based on http://libvirt.org/storage.html.
The operation supported on iSCSI pools includes:
1. List storage pools & volumes.
2. Get XML descriptor operaion on pools & volumes.
3. Lookup operation on pools & volumes by name, UUID and path (if applicable).
iSCSI pools does not support operations such as: Create / remove pools
and volumes.
Since we can't (currently) rely on the ability to provide blanket
support for all possible network changes by calling the toplevel
netdev hostside disconnect/connect functions (due to qemu only
supporting a lockstep between initialization of host side and guest
side of devices), in order to support live change of an interface's
nwfilter we need to make a special purpose function to only call the
nwfilter teardown and setup functions if the filter for an interface
(or its parameters) changes. The pattern is nearly identical to that
used to change the bridge that an interface is connected to.
This patch was inspired by a request from Guido Winkelmann
<guido@sagersystems.de>, who tested an earlier version.
To detect if an interface's nwfilter has changed, we need to also
compare the filterparams, which is a hashtable of virNWFilterVarValue.
virHashEqual can do this nicely, but requires a pointer to a function
that will compare two of the items being stored in the hashes.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=881480
These three functions:
virDomainNetGetActualBridgeName
virDomainNetGetActualDirectDev
virDomainNetGetActualDirectMode
return attributes that are in a union whose contents are interpreted
differently depending on the actual->type and so they should only
return non-0 when actual->type is 'bridge' (in the first case) or
'direct' (in the other two cases, but I had neglected to do that, so
...DirectDev() was returning bridge.brname (which happens to share the
same spot in the union with direct.linkdev) if actual->type was
'bridge', and ...BridgeName was returning direct.linkdev when
actual->type was 'direct'.
How does this involve Bug 881480 (which was about the inability to
switch between two networks that both have "<forward mode='bridge'/>
<bridge name='xxx'/>"? Whenever the return value of
virDomainNetGetActualDirectDev() for the new and old network
definitions doesn't match, qemuDomainChangeNet() requires a "complete
reconnect" of the device, which qemu currently doesn't
support. ...DirectDev() *should* have been returning NULL for old and
new, but was instead returning the old and new bridge names, which
differ.
(The other two functions weren't causing any behavioral problems in
virDomainChangeNet(), but their problem and fix was identical, so I
included them in this same patch).
Fix the null pointer access when UUID is not specified.
Introduce a bool 'uuidUsable' to virStoragePoolAuthCephx that indicates
if uuid was specified or not and use it instead of the pointless
comparison of the static UUID array to NULL.
Add an error message if both uuid and usage are specified.
Fixes:
Error: FORWARD_NULL (CWE-476):
libvirt-0.10.2/src/conf/storage_conf.c:461: var_deref_model: Passing
null pointer "uuid" to function "virUUIDParse(char const *, unsigned
char *)", which dereferences it. (The dereference is assumed on the
basis of the 'nonnull' parameter attribute.)
Error: NO_EFFECT (CWE-398):
libvirt-0.10.2/src/conf/storage_conf.c:979: array_null: Comparing an
array to null is not useful: "src->auth.cephx.secret.uuid != NULL".
Commit a21f5112 fixed one API, but missed two others that also
failed to log their 'flags' argument.
* src/libvirt.c (virNodeSuspendForDuration, virDomainGetHostname):
Log flags parameter.
This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **
There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add support for doing controlled shutdown / reboot in the LXC
driver. The default behaviour is to try talking to /dev/initctl
inside the container's virtual root (/proc/$INITPID/root). This
works with sysvinit or systemd. If that file does not exist
then send SIGTERM (for shutdown) or SIGHUP (for reboot). These
signals are not any kind of particular standard for shutdown
or reboot, just something apps can choose to handle. The new
virDomainSendProcessSignal allows for sending custom signals.
We might allow the choice of SIGTERM/HUP to be configured for
LXC containers via the XML in the future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The fact that only the guest agent, or ACPI flag can be used
when requesting reboot/shutdown is merely a limitation of the
QEMU driver impl at this time. Thus it should not be in
libvirt.c code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To be able todo controlled shutdown/reboot of containers an
API to talk to init via /dev/initctl is required. Fortunately
this is quite straightforward to implement, and is supported
by both sysvinit and systemd. Upstart support for /dev/initctl
is unclear.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When seeing a message
virNetSASLContextCheckIdentity:146 : SASL client admin not allowed in whitelist
it isn't immediately obvious that 'admin' is the identity
being checked. Quote the string to make it more obvious
The default machine type must be stored in the first element of
the caps->machineTypes array. This was done for help output
parsing but not for QMP probing.
Added a helper function qemuSetDefaultMachine to apply the same
fix up for both probing methods.
Further, it was necessary to set caps->nmachineTypes after QMP
probing.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=872292
Libvirt should not attempt to call a QMP command that has not been
documented in qemu.git - if future qemu introduces a command by the
same name but with subtly different semantics, then libvirt will be
broken when trying to use that command.
We also had some code that could never be reached - some of our
commands have an alternate for new vs. old qemu HMP commands; but
if we are new enough to support QMP, we only need a fallback to
the new HMP counterpart, and don't need to try for a QMP counterpart
for the old HMP version.
See also this attempt to convert the three snapshot commands to QMP:
https://lists.gnu.org/archive/html/qemu-devel/2012-07/msg01597.html
although it looks like that will still not happen before qemu 1.3.
That thread eventually decided that qemu would use the name
'save-vm' rather than 'savevm', which mitigates the fact that
libvirt's attempt to use a QMP 'savevm' would be broken, but we
might not be as lucky on the other commands.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONSetCPU)
(qemuMonitorJSONAddDrive, qemuMonitorJSONDriveDel)
(qemuMonitorJSONCreateSnapshot, qemuMonitorJSONLoadSnapshot)
(qemuMonitorJSONDeleteSnapshot): Use only HMP fallback for now.
(qemuMonitorJSONAddHostNetwork, qemuMonitorJSONRemoveHostNetwork)
(qemuMonitorJSONAttachDrive, qemuMonitorJSONGetGuestDriveAddress):
Delete; QMP implies QEMU_CAPS_DEVICE, which prefers AddNetdev,
RemoveNetdev, and AddDrive anyways (qemu_hotplug.c has all callers).
* src/qemu/qemu_monitor.c (qemuMonitorAddHostNetwork)
(qemuMonitorRemoveHostNetwork, qemuMonitorAttachDrive): Reflect
deleted commands.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONAddHostNetwork)
(qemuMonitorJSONRemoveHostNetwork, qemuMonitorJSONAttachDrive):
Likewise.
https://bugzilla.redhat.com/show_bug.cgi?id=876828
Commit 38c4a9cc introduced a regression in hot unplugging of disks
from qemu, where cgroup device ACLs were no longer being revoked
(thankfully not a security hole: cgroup ACLs only prevent open()
of the disk; so reverting the ACL prevents future abuse but doesn't
stop abuse from an fd that was already opened before the ACL change).
Commit 1b2ebf95 overlooked that there were two spots affected.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice):
Transfer backing chain before deletion.
* src/qemu/qemu_driver.c (qemuDomainDetachDeviceDiskLive): Fix
spacing (partly to ensure a different-looking patch).
Also removed some unreachable code found by coverity:
libvirt-0.10.2/src/nwfilter/nwfilter_driver.c:259: unreachable: This
code cannot be reached: "nwfilterDriverUnlock(driver...".
This patch adds two labels and gets rid of a ton of duplicated code.
This patch also fixes some error message and switches most of them to
proper error reporting functions.
This patch adds macros to help retrieve configuration values from qemu
driver's configuration. Some configuration options are grouped
together in the process.
This bug resolves CVE-2012-3411, which is described in the following
bugzilla report:
https://bugzilla.redhat.com/show_bug.cgi?id=833033
The following report is specifically for libvirt on Fedora:
https://bugzilla.redhat.com/show_bug.cgi?id=874702
In short, a dnsmasq instance run with the intention of listening for
DHCP/DNS requests only on a libvirt virtual network (which is
constructed using a Linux host bridge) would also answer queries sent
from outside the virtualization host.
This patch takes advantage of a new dnsmasq option "--bind-dynamic",
which will cause the listening socket to be setup such that it will
only receive those requests that actually come in via the bridge
interface. In order for this behavior to actually occur, not only must
"--bind-interfaces" be replaced with "--bind-dynamic", but also all
"--listen-address" options must be replaced with a single
"--interface" option. Fully:
--bind-interfaces --except-interface lo --listen-address x.x.x.x ...
(with --listen-address possibly repeated) is replaced with:
--bind-dynamic --interface virbrX
Of course libvirt can't use this new option if the host's dnsmasq
doesn't have it, but we still want libvirt to function (because the
great majority of libvirt installations, which only have mode='nat'
networks using RFC1918 private address ranges (e.g. 192.168.122.0/24),
are immune to this vulnerability from anywhere beyond the local subnet
of the host), so we use the new dnsmasqCaps API to check if dnsmasq
supports the new option and, if not, we use the "old" option style
instead. In order to assure that this permissiveness doesn't lead to a
vulnerable system, we do check for non-private addresses in this case,
and refuse to start the network if both a) we are using the old-style
options, and b) the network has a publicly routable IP
address. Hopefully this will provide the proper balance of not being
disruptive to those not practically affected, and making sure that
those who *are* affected get their dnsmasq upgraded.
(--bind-dynamic was added to dnsmasq in upstream commit
54dd393f3938fc0c19088fbd319b95e37d81a2b0, which was included in
dnsmasq-2.63)
This new function returns true if the given address is in the range of
any "private" or "local" networks as defined in RFC1918 (IPv4) or
RFC3484/RFC4193 (IPv6), otherwise they return false.
These ranges are:
192.168.0.0/16
172.16.0.0/16
10.0.0.0/24
FC00::/7
FEC0::/10
In order to optionally take advantage of new features in dnsmasq when
the host's version of dnsmasq supports them, but still be able to run
on hosts that don't support the new features, we need to be able to
detect the version of dnsmasq running on the host, and possibly
determine from the help output what options are in this dnsmasq.
This patch implements a greatly simplified version of the capabilities
code we already have for qemu. A dnsmasqCaps device can be created and
populated either from running a program on disk, reading a file with
the concatenated output of "dnsmasq --version; dnsmasq --help", or
examining a buffer in memory that contains the concatenated output of
those two commands. Simple functions to retrieve capabilities flags,
the version number, and the path of the binary are also included.
bridge_driver.c creates a single dnsmasqCaps object at driver startup,
and disposes of it at driver shutdown. Any time it must be used, the
dnsmasqCapsRefresh method is called - it checks the mtime of the
binary, and re-runs the checks if the binary has changed.
networkxml2argvtest.c creates 2 "artificial" dnsmasqCaps objects at
startup - one "restricted" (doesn't support --bind-dynamic) and one
"full" (does support --bind-dynamic). Some of the test cases use one
and some the other, to make sure both code pathes are tested.
On OOM, xdr_destroy got called even though it wasn't created yet.
Found by coverity:
Error: UNINIT (CWE-457):
libvirt-0.10.2/src/rpc/virnetmessage.c:214: var_decl: Declaring
variable "xdr" without initializer.
libvirt-0.10.2/src/rpc/virnetmessage.c:219: cond_true: Condition
"virReallocN(&msg->buffer, 1UL /* sizeof (*msg->buffer) */,
msg->bufferLength) < 0", taking true branch
libvirt-0.10.2/src/rpc/virnetmessage.c:221: goto: Jumping to label
"cleanup"
libvirt-0.10.2/src/rpc/virnetmessage.c:257: label: Reached label
"cleanup"
libvirt-0.10.2/src/rpc/virnetmessage.c:258: uninit_use: Using
uninitialized value "xdr.x_ops".
Found by coverity:
Error: REVERSE_INULL (CWE-476):
libvirt-0.10.2/src/util/processinfo.c:141: deref_ptr: Directly
dereferencing pointer "map".
libvirt-0.10.2/src/util/processinfo.c:142: check_after_deref:
Null-checking "map" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check.
Found by coverity:
Error: REVERSE_INULL (CWE-476):
libvirt-0.10.2/src/conf/netdev_bandwidth_conf.c:99: deref_ptr:
Directly dereferencing pointer "node".
libvirt-0.10.2/src/conf/netdev_bandwidth_conf.c:107:
check_after_deref: Null-checking "node" suggests that it may be
null, but it has already been dereferenced on all paths leading to
the check.
The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow actions to be performed in libvirtd when the host
shuts down, or user session exits, introduce a 'stop'
method to virDriverState. This will do things like saving
the VM state to a file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement the new API for sending signals to processes in a guest
for the LXC driver. Only support sending signals to the init
process for now, because
- The kernel does not appear to expose the mapping between
container PID numbers and host PID numbers anywhere in the
host OS namespace
- There is no race-free way to validate whether a host PID
corresponds to a process in a container.
* src/lxc/lxc_driver.c: Allow sending processes signals
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* src/remote/remote_protocol.x: message definition
* src/remote/remote_driver.c: Register driver function
* src/remote_protocol-structs: Test case
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an API for sending signals to arbitrary processes in the
guest OS. This is primarily useful for container based virt,
but can be used for machine virt too, if there is a suitable
guest agent,
* include/libvirt/libvirt.h.in: Add virDomainSendProcessSignal
and virDomainProcessSignal enum
* src/driver.h: Driver entry point
* src/libvirt.c, src/libvirt_public.syms: Impl for new API
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of 1a50ba2cb0 we fail to connect to the
monitor instead of getting an exit status != 0 from qemu itself. This
breaks capabilities probing for the non QMP case.
The documentation to this API has some defects from
grammar and wording POV. These were raised after I've
pushed the patches, so they are in a separate commit.
It makes no sense to fail the whole getting command if there is
a parameter unsupported by the kernel. This patch fixes it by
omitting the unsupported parameter for getMemoryParameters.
And for setMemoryParameters, this checks if there is an unsupported
parameter up front of the setting, and just returns failure if not
all parameters are supported.
Replace the following names
* struct qemu_snap_remove with virQEMUSnapRemovePtr
* struct qemu_snap_reparent with virQEMUSnapReparentPtr
* struct qemu_save_header with virQEMUSaveHeaderPtr
* enum qemu_save_formats with virQEMUSaveFormat
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=879473
The name attribute is required for portgroup elements (yes, the RNG
specifies that), and there is code in libvirt that assumes it is
non-null. Unfortunately, the portgroup parsing function wasn't
checking for lack of portgroup. One adverse result of this was that
attempts to update a network by adding a portgroup with no name would
cause libvirtd to segfault. For example:
virsh net-update default add portgroup "<portgroup default='yes'/>"
This patch causes virNetworkPortGroupParseXML to fail if no name is
specified, thus avoiding any later problems.
Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.
Commit cb022152 went overboard and introduced a dead conditional
while trying to get rid of a potential NULL dereference.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqNew):
Remove redundant conditional.
In a few places, the return value could get passed to VIR_ALLOC_N without
being checked, resulting in a request to allocate a lot of memory if the
return value was negative.
This can't lead to a crash since virNWFilterSnoopReqNew is only called
with a static array as the argument, but if we check for NULL we should
do it right.
Error messages produced while dispatching guest agent commands didn't
have an apparent reference to the fact that they are dealing with guest
agent commands. This patch fixes up some of the messages to contain that
reference.
using qemu guest agent. As said in previous patch,
@mountPoint must be NULL and @flags zero because
qemu guest agent doesn't support these arguments
yet. If qemu learns them, we can start supporting
them as well.
This will call FITRIM within guest. The API has 4 arguments,
however, only 2 will be used for now (@dom and @minumum).
The rest two are there if in future qemu guest agent learns them.
With QMP capability probing, the version was not set.
virsh version returns:
...
Cannot extract running QEMU hypervisor version
This is fixed by computing caps->version from QMP major,
minor, micro values.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QMP Capability probing will fail if QEMU cannot bind to the
QMP monitor socket in the qemu_driver->libDir directory.
That's because the child process is stripped of all
capabilities and this directory is chown'ed to the configured
QEMU user/group (normally qemu:qemu) by the QEMU driver.
To prevent this from happening, the driver startup will now pass
the QEMU uid and gid down to the capability probing code.
All capability probing invocations of QEMU will be run with
the configured QEMU uid instead of libvirtd's.
Furter, the pid file handling is moved to libvirt, as QEMU
cannot write to the qemu_driver->runDir (root:root). This also
means that the libvirt daemonizing must be used.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
If qemuMonitorOpenUnix is called without a related pid, i.e. for
QMP probing, a connect failure can happen as the result of a race.
Without a pid there is no retry and thus we give up too early.
This changes the code to retry if no pid is supplied.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
we already have virtualize meminfo for container through fuse filesystem,
add function lxcContainerMountProcFuse to mount this meminfo file to
the container's /proc/meminfo.
So we can isolate container's /proc/meminfo from host now.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
