The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.
This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.
The error is exposed by the following log entry:
debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'
for a "/machine/test" resource and "testvm" vm.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570
Create a new common API to replace the virCgroupNew{Vcpu|Emulator|IOThread}
API's using an emum to generate the cgroup name
Signed-off-by: John Ferlan <jferlan@redhat.com>
This new internal API checks if given CGroup controller is
available. It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Throughout our code, the virCgroupController enum is used in two ways.
First as an index to an array of cgroup controllers:
struct virCgroup {
char *path;
struct virCgroupController controllers[VIR_CGROUP_CONTROLLER_LAST];
};
Second way is that when calling virCgroupNew() a bitmask of the enum
items can be passed to selectively detect only some controllers. For
instance:
int
virCgroupNewVcpu(virCgroupPtr domain,
int vcpuid,
bool create,
virCgroupPtr *group)
{
...
controllers = ((1 << VIR_CGROUP_CONTROLLER_CPU) |
(1 << VIR_CGROUP_CONTROLLER_CPUACCT) |
(1 << VIR_CGROUP_CONTROLLER_CPUSET));
if (virCgroupNew(-1, name, domain, controllers, group) < 0)
goto cleanup;
}
Even though it's highly unlikely that so many new controllers will be
invented so that we would overflow when constructing the bitmask, it
doesn't hurt to check at compile time either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.
This falls back to the old CreateMachine method when the new
one is not supported.
If we don't properly clean up all processes in the
machine-<vmname>.scope systemd won't remove the cgroup and subsequent vm
starts fail with
'CreateMachine: File exists'
Additional processes can e.g. be added via
echo $PID > /sys/fs/cgroup/systemd/machine.slice/machine-${VMNAME}.scope/tasks
but there are other cases like
http://bugs.debian.org/761521
Invoke TerminateMachine to be on the safe side since systemd tracks the
cgroup anyway. This is a noop if all processes have terminated already.
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:
<mknod state="on"/>, keep CAP_MKNOD capability
<sys_chroot state="off"/> drop CAP_SYS_CHROOT capability
Users can restrict or give more capabilities than the default using
this mechanism.
Cgroups code uses VIR_CGROUP_DEVICE_* flags to specify the mode but in
the end it needs to be converted to a string. Add a helper to do it and
use it in the cgroup code before introducing it into the rest of the
code.
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.
Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.
Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
This function is needed for user namespaces, where we need to chmod()
the cgroup to the initial uid/gid such that systemd is allowed to
use the cgroup.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces virCgroupSetBlkioDeviceReadIops,
virCgroupSetBlkioDeviceWriteIops,
virCgroupSetBlkioDeviceReadBps and
virCgroupSetBlkioDeviceWriteBps,
we can use these interfaces to set up throttle
blkio cgroup for domain.
This patch also adds the new throttle blkio cgroup
elements to the test xml.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Make future patches smaller by matching a sane header listing in
the first place. No semantic change.
* src/util/vircgroup.h: Move free next to new, and controller
functions next to each other.
* src/util/vircgroup.c (virCgroupFree, virCgroupHasController)
(virCgroupPathOfController, virCgroupRemoveRecursively)
(virCgroupRemove): Sort implementation to be closer to header.
Signed-off-by: Eric Blake <eblake@redhat.com>
Make the virCgroupNewMachine method try to use systemd-machined
first. If that fails, then fallback to using the traditional
cgroup setup code path.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Systemd uses a named cgroup mount for tracking processes. Add
it as another type of controller, albeit one which we have to
special case in a number of places. In particular we must
never create/delete directories there, nor add tasks. Essentially
the systemd mount is to be considered read-only for libvirt.
With this change both the virCgroupDetectPlacement and
virCgroupCopyPlacement methods must be invoked. The copy
placement method will copy setup for resource controllers
only. The detect placement method will probe for any
named controllers, or resource controllers not already
setup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupIsValidMachine does not need to be called from
outside the cgroups file now, so make it static.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of requiring drivers to use a combination of calls
to virCgroupNewDetect and virCgroupIsValidMachine, combine
the two into virCgroupNewDetectMachine
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of requiring one API call to create a cgroup and
another to add a task to it, introduce a new API
virCgroupNewMachine which does both jobs at once. This
will facilitate the later code to talk to systemd to
achieve this job which is also atomic.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupNewDomainDriver and virCgroupNewDriver methods
are obsolete now that we can auto-detect existing cgroup
placement. Delete them to reduce code bloat.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virCgroupIsValidMachine API to check whether an auto
detected cgroup is valid for a machine. This lets us
check if a VM has just been placed into some generic
shared cgroup, or worse, the root cgroup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virCgroupNewDetect API which is used to initialize a
cgroup object with the placement of an arbitrary process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virCgroupIsolateMount method which looks at where the
current process is place in the cgroups (eg /system/demo.lxc.libvirt)
and then remounts the cgroups such that this sub-directory
becomes the root directory from the current process' POV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename all the virCgroupForXXX methods to use the form
virCgroupNewXXX since they are all constructors. Also
make sure the output parameter is the last one in the
list, and annotate all pointers as non-null. Fix up
all callers, and make sure they use true/false not 0/1
for the boolean parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupMounted method is badly named, since a controller can be
mounted, but disabled in the current object. Rename the method to be
virCgroupHasController. Also make it tolerant to a NULL virCgroupPtr
and out-of-range controller index, to avoid duplication of these
checks in all callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when getting an instance of virCgroupPtr we will
create the path in all cgroup controllers. Only at the virt
driver layer are we attempting to filter controllers. This
is bad because the mere act of creating the dirs in the
controllers can have a functional impact on the kernel,
particularly for performance.
Update the virCgroupForDriver() method to accept a bitmask
of controllers to use. Only create dirs in the controllers
that are requested. When creating cgroups for domains,
respect the active controller list from the parent cgroup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupGetAppRoot is not clear in its meaning. Change
to virCgroupForSelf to highlight that this returns the
cgroup config for the caller's process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
